Learning the Mudboss 12T Part 1

This is the first video in my RC series. I am fairly new to the hobby and am jumping in with both feet, and figured I would share my trials and tribulations(and hopefully some moral victories) along the way!
This episode tackles the conversion of a stock Traxxas 2wd Slash and making it into an oval racer, specifically the 12T Mudboss.
For a killer explanation of exactly what I am doing, please check out Mark over at OVAL RC: • Mudboss Setup #1 - Get...
_____________________________________________________________
Join this channel to get access to perks:
/ @outlawspeedshop2001
+++++++++++++++++++++++++++++++++++++
FACEBOOK:
/ outlawspeedshop
INSTAGRAM:
/ outlawspeedshop2001
Website:
www.outlawspee...
My email: [e-mail]
+++++++++++++++++++++++++++++++

[@johnnyvscustomsgaragetassie.]

Hey Keith, We all gotta start somewhere. But it's where you finish that count's. Best of luck with it. Cheer's JV

[@HunterTravels]

I am getting into RC and it is like crack bought a few cars. Found out there is a Oval track kinda far away . But interested glad this video popped up. Informative to get a setup. Thanks

[@hangdogdaddy38]

I found the same thing at my track. Never felt more welcomed in my life.

[@1st64thcustoms5]

any way you can soften the outside front shock? try and open that exit up a touch... quite cool seeing the conering improving in the short clip. keep these up, RC is a great hobby!!

[@neilcummings9939]

looks like a fun hobby. brother and father inlaws are into rc

[@southpawdiecast8352]

Good video ,i too use to run alot of RC Cars before i got into Diecast Hobby. always wanted to know what Mud Boss. one suggestion about taking in and out screws never use power tools to put in or take out any screws, as they will strip the holes because eveything on chassis are plastic.also speaking of indoor ovals ill send you some info on these cool little oval Cars.ive aced RC for years .even ran 1/4 scale Nascar

[@ericmayernick7804]

A Lil advice use a very fine sand paper and sand the Shiney stuff off of your shock shafts

[@jamesgiddens1360]

I'm glad to see someone else in to the RC world too I have several rc's I have a red cat that was my beginner level it didnt take me long to get bored with that my 2nd one was an old Traxxas TMaxx the one with the larger of the 2 engines offered in the tmaxx then my 3rd was a traxxas Telluride and I went to building burnt the motor up in it then I put the replacement engine vilenion it has a set of 3.0 super stampers and it went from there I t gained a spot in the rc magazine and it just sits now noone will play with me .oh btw I was born in 1960

[@messn03]

Great video! Thanks 😊

[@rondusing6081]

The units that you said that you're going to change on the RC vehicle is a receiver not a transmitter

[@mikesmodscustoms]

Excellent introduction video! Are you planning to run off-road on Sundays?

[@OutlawSpeedShop2001]

Yes sir. I have the stock slash class and I may start running novice with my losi sct3.

[@FromthePits]

Hoover Graphics, can't be beat!

[@briansdiecastthailandstoth6747]

Very cool video..I liked

[@FranBushardt]

You have Multiple Holes for Shock Settings for the Lower Shock mounts. What do you suggest for short oval High bite Clay. Fronts & Backs??

[@OutlawSpeedShop2001]

I have normally run the right and lefts different. I run the right in the middle to inside and the left to the outside. And for high bite I run a stiffer oil

[@JaysDiecastCreations]

Ahhh yes, the can of worms has been opened 😂😎👊✌

[@darrinboring2366]

Did I miss how many holes in the pistons front and rear?

[@BC-rc]

Good video! Does that body come predrilled for body post and screw holes?

[@OutlawSpeedShop2001]

Yes it does

[@whorok305]

Rc addict over here.

[@captainwonderspork]

Would love to see you do a custom on a cheap rc from like Walmart

[@jeffbryner5355]

Bahaha why waist the time and money? There a whole different type of electric system. As far as the speed control amd servo goes plus there just a cheaply made design and the gears won't holed the power of a brushless set up

[@ericford3115]

What you get for a 12 t mud boss

[@joshharry6333]

Part 2?

[@mikereimer4279]

30wt inside shocks from factory

[@kylekelly4648]

I’m not being mean. You have a really good video. I’m giving you a thumbs up but the constant teeth sucking prevented me from finishing the video. I’m not being rude I promise.