Learning The Putzmeister TK-50 Trailer Pump For The 1st Time!

When asked how a concrete pump truck works many times over the years, I finally made a decision. It was to make a KZbin page showing different job situations, setups, and a day in the life of a concrete pump operator. Please leave me comments as I try and show my daily job in a, Concrete Pump Vlog which is fun to watch and kid friendly. Thank you for showing interest in this channel and please, Like, Share, And Subscribe!

[@canadianconcretepumper1979]

Also, that rig looks CLEAN!!!!! And sounds like it’s got a Deutz in it (pre-emissions). Those things will run forever and give you little to no headaches. Congratulations on your new acquisition. Looking forward to seeing this little money-maker featured in many future videos!

[@fronabargerconveyingpumping]

We're believe this will be a great addition to the company. This will help with those oddball pours also, hopefully making work for the guys a bit easier at times.

[@Jibbynewtron]

Pumper caddys are your best friend too they keep things nice and dont gwt scratched by the clamps

[@shuwebmohamed]

Good job construction job 🎉

[@Jibbynewtron]

Use bentonite its the best hose primer

[@fronabargerconveyingpumping]

I've got bentonite, just haven't used it on the trailer yet. I keep hearing it's good stuff.

[@richardspence2005]

All the best in your new business venture… you have nothing to worry about man it’s as easy as it gets. Just make sure you have the right mix for those 2 1/2” hose, keep that mesh on and don’t forget to wrap the pump 😂

[@fronabargerconveyingpumping]

I'm sure Frank never forgot to "wrap the pump" after that day.

[@richardspence2005]

@@fronabargerconveyingpumping😂😂😂😂😂😂

[@nwconcreteworxllc1258]

The slime only works on the boom

[@nwconcreteworxllc1258]

I’ve never had luck with the slime packs only good for 75 ft use powder great buy on the pump 👍🏻🇺🇸

[@canadianconcretepumper1979]

Same here. Never had good results with gel-type primers. I’ve almost had better success with just using straight water.

[@nwconcreteworxllc1258]

@@canadianconcretepumper1979 ya just on rubber hoses anyway I noticed you guys use a lot of bentonite powder where are you getting it?

[@nwconcreteworxllc1258]

@@canadianconcretepumper1979 also I was a finisher for 25 years so I know what it’s like to get that in the concrete so we just buy pallets of billy bags 30# of good old powder Porland cement

[@canadianconcretepumper1979]

@@nwconcreteworxllc1258 that’s the best stuff for finished concrete. Don’t have to stress over potentially messing up a slab with bentonite contamination. 👍🏼👍🏼👍🏼

[@MultiAron5]

Don’t trust slick pack to prime , good for 90ft or less. Mortar 👍

[@10-10-]

Wet your clamps before you put them on they go on a lot easier

[@canadianconcretepumper1979]

So many variations in gaskets these days. We were able to source some less “beefy” gaskets, which makes the clamps go together so much easier (especially in the winter).