Learning to FLY a CINEMATIC FPV DRONE in ONE WEEK!

[@TMSProductions]

For anyone who is curious, all the parts are listed in the description!

[@WombatFPV]

Welcome to the hobby/sport! Have you heard of BQE.io? Tell em Wombat sent ya.

[@WrongWayFPV]

@@WombatFPV hahaha... Wassup Wombat!!

[@WombatFPV]

@@WrongWayFPV Whattupp!!

[@halowalker797]

Welcome to FPV from my Side too!!!!! Cool seeing new people comin!!!! Here are some Tips: I'd recommend different goggles the Eachine Ev800DM and also the Mamba Stack ist not only the FC but also a 4in1ESC.... Umm also Last Thing, you can Take the drone in your Hand when armed, Just make Sure your Motors are configured right and U have all the directions right (Motors and Props)....ohhh and be careful 😂 One Question too, did U use RealSteadyGo or GoPro Hypersoomth for your shots?

[@dorukberkoz1096]

I think nobody told you this but work without props...

[@sirashley2355]

lol omg this is an awesome video. true noobs. 1. tries to fly in house 2.doesnt do all the calibrations before maiden flight 3.grabs armed quad 4.doesnt make sure the props are configured in the proper direction 5. immediately goes into FPV flight without checking the flight characteristics in line of sight mode 6.flys over peoples homes and public roads without knowing the craft/equipment well (range, reliability, etc.) and the quad just falls out the sky. im only at 9:16 but still a great video a must watch for people getting into the hobby. learn from his mistakes so you dont have to repeat them. ESPECIALLY #6 if that thing would've fell from the sky and hit a moving vehicle causing it to swerve/crash with injuries it could spell disaster for the whole Hobby. they are looking for reasons to shut us down. fly safe, fly often

[@Dalsy97]

This comment need more visibility. Smash the like button

@@Dalsy97 no

"Bill, get the gun... there's somebody in our backyard!"

[@waxfire4482]

and im guessing he doesn't have a transport canada permit for rpas over 250g

[@squeezablemayonnaise8904]

Agreed. The whole LOS thing though is am opinion because I started with the goggles first because that was easier and then learned LOS

[@okeverett8498]

Honestly thought the two brothers were the same person till 14 minutes in

[@BullCheatFR]

Ok Everett Same

[@chingchongkkjong2895]

Hahahaha me too

[@matthewparsanian]

same

[@sonicelectronic57]

I didn't know there were two people until I read this post!

[@tonyowen116]

I didn't catch on until I watched their camera zip line video. Was doing double takes. Then they were in the same shot. Uhhhh... O.K. Then I started looking for difference, as they are not exactly identical twins. Easiest way for me - Steven has a mole on his lower left jaw, beneath the corner of his mouth. Also Steven looks to be a tad taller. Both have great personalities for this channel, which makes it a bit more difficult (besides their voices being almost the same) to tell them apart. Steven's eyes are a bit different than Mitchell's. Uh... guess enough said. I usually look for the mole.

[@haydencloud2869]

Welcome to the hobby. For anyone watching and wanting to dive right in, I would recommend not following what this guy did. I would highly recommend watching some videos from Rotor Riot or Joshua Bardwell. These guys are pros and have great advice for getting into the hobby.

[@TMSProductions]

Agreed!

[@leo.1268]

Thanks

[@rumihayes6907]

Hey, I would like to learn how to fly FPV. Do I have to assemble the parts or can I buy a drone that is already made?

[@hrhodes2768]

Rumi Hayes you can buy ready to fly and bind and fly quads but I would recommend building your own because when you break it you'll know exactly how to fix it I would recommend doing tons of research before you buy anything because re-buying all of your parts because they are not compatible or break really quickly you should check out a channel called Joshua bardwell because he is a massive wealth of knowledge and his channel still helps me with some problems after the last few years good luck!!

[@b4ckd00r3]

Rumi Hayes You could and should before flying a drone in real life, fly in a simulator first, remember these drones are not like dji drones which are fairly easy to fly and even beginners can do it after a few minutes. Fpv drones require practice and Im speaking from my own experience, before I bought the drone I bought myself the simulator and a transmitter so I could train beforehand. And I must admit that if I hadn’t trained, I would’ve crashed my drone on my first flight. About assembling. You dont need to but assembling one yourself really helps understanding everything and you can easily repair it if it breakes

[@JoshPalerLin]

Sick editing

[@TMSProductions]

Thank You!

[@Dr.Souravagrawal]

@@TMSProductions no bro....great editing ❤️

[@parshvapatel8484]

JoshPalerLin what is its range plz and flight time

[@DavePark]

+1 to that 🤙

[@Darksagan]

I can honestly say its the most frustrating hobby Ive ever had. Shit always goes wrong when you start and for every problem is a days worth of researching on forums and youtube. But I love it and the reward can be epic.

[@WEEBER13]

So true

[@bwasfpv]

agreed 100%..thats why start on sims

[@electricburning]

@@bwasfpv So true.. I have my ultralight drone but mostly sit in my chair and play sims.

[@TMSProductions]

Agreed! We've experienced a lot of that so far but it's so much fun!

[@thomasgut8759]

@@TMSProductions I started in a sim (velocidrone, highly recomended) and spent hundreds of hours in there, then i went outside and spend dozens of hours, it gets expensive and quite frustrating at times but when you hit that very tight gap , fly that very flowy line and you're able to experience a birdseye reality, all of whats mentioned above becomes meaningless and the value of fun and excitement you get from it is priceless!!! Glad to see someone joining the hobby and wish you a lot of exciting and breathtaking moments

[@zachmachina]

6:46 "Transmitter battery low" 9:08 "The controller turned off! It almost hit me in the head!"

[@NoNo-fj1hf]

oh yeah, this is big brain time

[@lukeferreira7546]

True

[@ThePurplePupUwU]

And that's why I use opentx

[@krotchlickmeugh627]

@@ThePurplePupUwU wtf does open tx have to do with the batery dying?

[@ThePurplePupUwU]

@@krotchlickmeugh627 it had voice commands to tell you that battery is low, or critically low.

[@bwdnako]

lol, note to everyone, when your transmitter is giving you a low battery warning, pry shouldnt go flying without charging it ;)

[@thefinalunnamed312]

Juuussst maybe

[@thefinalunnamed312]

I mean you can just fly it with your mind

[@shuraim8675]

Too late, Had a crash last week. I think it happened cause the battery was low and the transmission power was low :)

[@nythawkfpv]

It depends on battery type. I used a LiFePo battery thats max voltage is 6.6v rather than a LIPOs 8.2-8.4v.

[@rocky5763]

@@nythawkfpv 8.2???

[@LourieJacobs79]

Every problem that pops up, every thing you have to go look for answers for, everything is worth it the moment you take that first epic flight! Nothing like it! Freedom like you have never experienced. Instant love.

[@jacuskot]

Blood, snow, GoPro and the drone. This is insanely emotional mixture. Congrats for learning new skills!

[@hkhobbypakistan6917]

Helo sir

[@TMSProductions]

Thank you! It was an emotional journey for sure!

[@KubaSzczygielski]

Damn, never mind the drone - storytelling, cinematography, music, everything is perfect here. We have exposition, rising action, first failures, first success, and then awesome resolution. Congratulations on the filmmaking skills!

[@paraurti]

maybe first fpv flight, sure not first filmmaking... awesome!

[@Nate2193]

I absolutely agree!! Amazing video!!

[@somebodyelse522]

@@paraurti he’s talking about the KZbin video itself

[@chocolatized]

6:49 is seriously my most favorite part of the entire video lol that was so cute. Like a lil Pokémon

[@hkhobbypakistan6917]

Helo...

[@hkhobbypakistan6917]

@Sasha Kruse Grim helo sir

[@gonzalojimenezrivero]

Yamavi me too

[@RimmyTimfpv]

Its only doing it like that because of a very important safety feature in the drone's flight controller that is preventing the drone from launching to the sky on its own as a result of the obvious mistake that the pilot made while configuring the settings in Betaflight. If this was attempted a couple years ago before that safety feature what implemented, the drone would have spun out of control into the sky and possibly never come back... but yeah, its cute.

[@ethersecure2432]

You know someone spends too much time indoors when sitting in a park in front of your house is being "out in the bush" lol

[@strikerFPV]

Small heads up for all the future fpv pilots out there: Always use a multimeter to meassure for continuity and additionally a smoke stopper before pluggging in the first time (; Also never fly indoors unless you know what you are doing^^ This guy was so lucky to not loose a finger.... Also your quad might need some tuning. You can definitly get rid of those vibrations in your video :D

[@LokaLize]

What tuning gets rid of vibration? I have them to

[@Sergeant898]

@@LokaLize PID tuning to eliminate oscillations and bad flight characteristics. You need to know what you are doing. Extreme settings can burn out you motor windings.

[@LokaLize]

@@Sergeant898 oh.. Not something for a beginner to do then.

[@ugpfpv361]

@@LokaLize not too involved but yes something to watch a few videos on, you can smoke your motor pretty quickly of not following a few rules

[@strikerFPV]

@@LokaLize So generally it's tuning Mechanicals then Filters and then PIDs. Mechanical tuning is done by making a clean build e.g tightning all the screws, clean soldering, using a capacitor... and using (proper) soft mounting methods. Soft mounting is kind of a mechanical filtering which gets rid of some undesired effects described below. The good thing is, it's super easy and it always works. You can't break it. Just make sure to only use one soft mounting method. Don't overdo it or your quad will fly really "sluggish". Filtering in short: Your fllight controler has a little sensor, that messures the g-forces impacting on it. Called a gyro. This data and your inputs is then used to move the quad where you tell it to and correct movement that happens for whatever reason and you didn't give as input. So now the problem is, that we also have data in those readings, which actually is impossible for the motors to correct and also there's no reason. Those are mostly frequencies not visible and irelevant. Also we get noise into the gyro e.g electrical noise from motors or other stuff, that doesn't coresspond to real movements and shouldn't be corrected either. Because what happens if you correct a movement that isn't there? You actually introduce those vibrations. There's a lot of videos on filters and it definitly needs some time to understand them. Too low filtering can overheat your motors as your quad will try to react to those vibrations in frequencies it can't react to. Using Betaflight 4.1 Slider though makes it rather easy. Just keep lowering the filters and do extensive testing on each step. First thing to do is a short hover. If the motors are already warm you should go back a step. Although nice to test each stage with a little beat up props (flyable ones though^^). To visualize the gyro input you can enable logging in Betaflight and use BetaflightConfigurator and PidToolbox to visualize it. There's a ton of videos on this topic. PIDs: This is really something to watch video's on. So small changes usually don't do much. Changes by feeling never work for me. I am using PidToolbox to visualize my PID's and then change them accordingly. Usually I start with someone else PID's to a quad similar to mine (first make sure that you have a mechanically clean working quad). The tricky part on them is, that P, I and D values work with each other. Chaning one alone at a time like often suggested never brings me to the desired result. It's about the right ratios. This is where again the Betaflight 4.1 Sliders are really helpful. Well this ended as quite a lot of text. Hope it gives you a small insight into the topic though (:

[@AK47shabazz]

I haven’t seen any comments about this yet, but this editing is incredible. Actually blowing my mind the effort put in to some of these transitions. The drone shots of the car in the snowy woods is such a minute detail and almost irrelevant to the entire video but adds such a dynamic vision of the area youre traversing and I really appreciate the time and effort put in to the minor details that most people don’t notice. Well fucking done.

[@ryanwoods8099]

I just want to say, I watched this vid near 2 months ago. I bought drone parts on January 5th (not the parts you mentioned in the description.) I received the parts about a week ago. I struggled a lot for a week to build my drone because of my 0 experience on how to and where to solder the wires. After figuring the wiring I came across another struggle, how to setup Betaflight and configure my drone. As you can expect I figured everything out except the one last problem you had with your drone. My drone mimicked the way your drone hopped on thrust and stopped. Luckily, I remembered your video and saw what you did to fix it. So, what I am saying is, thank you so much for including the part where you fixed your drone because it definitely fixed mine.

[@ShinyTechThings]

The sniff test is super important. Electronics are powered by "magic smoke" because once the "magic smoke" comes out it stops working 🤓🤣

[@nealb6974]

I love the over the top cinematic soldering scene😂

[@FPVPRINTS]

Right. Overkill master

[@chrisbee9164]

Love your enthusiasm. I’m a newbie to the hobby, and middle aged, but I feel equally excited at starting out.

[@MoreKnowledgeShorts]

I love how much effort you put into your videos your great

[@HawkeyeDFPV]

Love seeing people join the hobby, my channel is all FPV. Great job

[@JohnEFly]

Welcome to the hobby brother! Fantastic production quality, great story telling. I really love seeing the excitement of other pilots first getting into the hobby and personally remembering the days when I first started. You flew amazing for it just being your first week, hopefully you stick with it and you'll be nailing killer shots in no time. Hopefully you avoid flying over peoples houses and cars and such as you keep practicing though, especially while starting out. Good luck!

[@TMSProductions]

Thanks for the heads up!

[@WrongWayFPV]

I'm pretty impressed on how quickly you progressed. I've been flying FPV for about 2 years now. Best hobby ever.

[@timbieber9904]

Amazing! You guys took the challenge and killed it. So impressive!! I had no idea the FPV drones didn’t just come ready to fly? Impressive all around boys! Thumbs up from me. Tim

[@TMSProductions]

Thanks, Tim! Building the drones is a real challenge!

[@willbachman5919]

You can get bind and flys (prebuilts). You can also get kits. But most people buy all the parts separate

[@tiwaztyr4324]

I love the way you did the build - camera transitions.

[@da404lewzer]

"If my calculations are correct" is a weird way to say "if I followed the instructions correctly" 😂

[@ThePurplePupUwU]

Let me tell you something. In this hobby, nothing comes with instructions, except maybe fatshark goggles

[@damiangasparac8961]

The most stupid thing in this hobby is impatience.

[@friendlyfire01]

seriously: take it from a guy with 5k in the hole, buy a RADIO and play a SIMULATOR until you kick ass.

[@emmettsewell]

damian gasparac I have to agree

[@iamjsullivan]

evidently 😂

[@inappreciable]

@el bandido jefe why would he be jealous that's just stupid

[@Tensho_C]

@el bandido jefe most people can do it in a week, with proper guidance.

[@alexandereckhardt7153]

This reminds me of when I first started, accept there was a lot more trouble shooting lol. Awesome seeing how much this hobby has taken off.

[@emmettsewell]

I love this hobby and honestly it’s one of the best cinematic tools

[@mantisfpv4514]

Pick your head up. Your antennas are pointing to the ground.

[@chuckySK81]

And the high gain antenna orientation is wrong...

[@monzerfaisal3673]

He's used to DJI controllers i guess

[@eliodib86]

Peter Janusek how should he point it? curious as i m new to the hobby and i dont know about the antennas that much

[@chuckySK81]

@@eliodib86 High gain/directional/ antenna must always point to the direction where drone is flying...Omnidirectional have less gain but it work 360 degrees around you. The diretional antenna have only 60degrees or less...More gain-less area to cover, but you can fly much more far. But antenna must point to the drone more precisely...Omni directional antennas are pagodas and other circular polarization antennas...Omni antenas is also antenas like you use for wifi router, but they are not circular polarity but linear...High gain antenas are patch antennas, or helical, or yagi....

[@eliodib86]

Peter Janusek okayy thank youuu

[@rotorismo]

Welcome to the most amazing hobby of the universe. Your making the best example how to not be patient to try out your build. Exemplary for getting respect for the props through experience. Therefore very nice to see you disarming in time while you crash. Trip down memory lane when watching you flying FPV for the first try. Wishing you luck to solve the jello problem of your quad!

[@hrhodes2768]

can we all agree that this is the equivalent of the verge pc build but for fpv

[@bob6168able]

The best thing in your channel that you show all the failures you face! You need to try a cinewhoop.

[@MachineManGabb]

Nice dude, been in the hobby for 2 years now and it's truly unique , welcome to the hobby❤️

[@TMSProductions]

Thank you!

[@HerreDePerre]

kingsloth is it worth getting into?

[@MachineManGabb]

@@HerreDePerre hell yeah, it's getting cheaper and safer every year, if you want some help building one feel free to contact me via Instagram or Facebook, kingsloth or Gabriel Bojer

[@JedRom]

That feeling that you had when you first flew FPV...yea, I know that exact feeling. I was astonished when I did it. Happy FPV dude!!!

[@joshstorms1131]

This might be your best video so far. Sound design, attention to detail, story. Excellent work.

[@joshstorms1131]

The real question is can we have a parts list? :)

[@TMSProductions]

Thank you! We really appreciate it! Parts list coming soon!

[@walkingmanvideo9455]

Great work.........that showed a major part of doing anything from scratch.....FUN....Ya gotta have FUN...Well done.

[@thegabenator1426]

Story: A++ Smarticles: F- Story is way more important than playing it safe, right??😜

[@mobb_vrc]

Its entertaining af tho

[@sonicelectronic57]

Safety third!

[@ThePurplePupUwU]

Safety 2nd, after fun

[@vijayswaroop568]

That initial take off is like the drone is barking like a 🐕 cute...😂😍

[@flyingfrogfpv]

Please always take care while learning to fly FPV. Some interactions in this video are really dangerous. Pls just watch first some Video series from Joshua Bardwell to learn how to build and configurate.

[@collinsnjarara3352]

Awesome video. I am happy for you as you start discovering the drone and FPV hobby. It will be frustrating but it is worth it. Happy flying.

[@TMSProductions]

Thank you! We're having a lot of fun!

[@Free_3.0]

Looks like we're working in opposite directions. You're getting into FPV, and I'm trying to work on cinematography. Keep it up!!!

[@knightrulz2]

Never have I watched a KZbin video where I just wish I was there hanging! Seriously, you all are naturals in front of the cameras and make this fun! Video production is top notch! Keep it up!,

[@andibandi69420]

12:00 he really getting the 4s to 6V and 1.7per cell, and people in the vomments complain about his 14.4 instead of 14.8

[@frankyfrench5279]

Also a good habbit always plug in the battery, when holding drone strongly from below, so not between the props, as you never know. For any testing even without props, just barely plug in xt60 by 1 mm, so whatever happens drone will unplug fast, just touching the cable.

[@Tattman-cn5wv]

I think your video is a perfect example for new people getting into this they need to know what to do and why they shouldn’t do those things. I’m new to this been playing the dcl simulator on ps4 tell I get everything in the mail. I’ve been racking up about 4 hours a day.

[@messifpv]

Small heads up for all the future fpv pilots out there: These drones can be a little dangerous. When you're a beginner, try to reach out to the local FPV community to get some guidance/help. The first time you arm/fly your new quadcopter, a series of issues can arise, that's why you need to test everything carefully before you can confidently fly in a little park like that in the middle of a residential area. One important test to do is to arm your quad whitout the props (important) and turn off your radio while the motors are spinning. This is especially important if you haven't setup a 'failsafe' yet. If the motors turn off you're fine, if they don't, you might lose the whole thing the first time you lose radio connection. Enjoy and fly safe! Edit: Now that I've watched the whole video it was actually insane! Can't believe you guys went to rip that spot after just a week of practice! Good stuff, that's what FPV is all about, keep it up!

[@lassie995]

I use such large soldering iron for soldering rain gutters ! You need small, 25-30 watts one, or you will melt everything. Such accident happened to most drone pilots, including me, had luck, injury was minimal, i learned it hard way, same as you lol. Each of that motors can draw around 350 - 400 watts at full power, it is half a horsepower, there is potential to serious injury !

[@isaacmandell-seaver7223]

3:12 when you think your daughter might me a nicotine addict.

[@PHILMMedia]

HAHA

[@lukeferreira7546]

Lmao

[@jumpmanjmac]

Lmfaooooo best comment I’ve probably ever read on KZbin. 😂😂

[@dermax_hd]

him sitting there with his patch antenna rotated 90° triggers me sooo much haha Great video!

[@SFPV]

Don’t feel stupid man. It’s a very complex machine. So much to learn.

[@DixBflopping]

The cinematography of this video is amazing

[@CamimalFPV]

4:46 I'm glad you uploaded this, people have lost fingers doing this... drones need to be treated with respect. The drone you built probably has 6-8kg of thrust... all of that force through 4 tiny propellers? You're lucky it didn't have much time to spin up or you might've been looking at fingers sliced off!! If you're holding onto the drone, if you hold with over 6-8kg thrust equivalent of grip strength you'd actually be ok. I've seen drones attempting to flyaway (full throttling without pilot instruction) be held onto by a prepared strong grip. STAY SAFE BROS

[@benpalmer1116]

"never flown a drone before, lets go try this insane ridge dive" *cuts to perfect drone footage of car going to location*

[@magicalframe9441]

this is why FPV guys roll their eyes at DJI pilots lol. you'll learn

[@bruswain9158]

Omg what an annoying wankerish comment!!!

[@QSpeedRacer]

They, we, fly the dji cause it is easy. It literally flies itself

[@mattrenshaw9216]

It’s true. Especially if your a fpv veteran but I guess even us FPV guys all had to start at some point too, I just can’t remember it was so long ago. Damn those box goggles, umm, yeah I know it’s a budget build thing but damn. You can get some older Fatsharks or used ones and buy new bands for them or just go straight digital I made the conversion last year from analog. DJI FPV low latency system. Thankfully the only part that’s DJI is vtx and goggles. Not they they don’t make good products I just don’t want them ruining the FPV scene.

[@garypaxton8194]

Yeh man thank you i just got myself a tbs 5 inch racing drone long distance can't wait until she comes lol.

[@gonzyyy]

This is the most underrated video I have ever watched...

[@kylebnrhs]

I honestly find so much joy in watching your videos!!

[@cwtim]

Uhh the first step research, skipped the safety huh :P

[@ilFly07]

This video is just amazing.. I'm air 2 owner and I starting to thinking about the fpv world, this video is simply perfect for me... really good, really emotional, I feel like I was there with you guys... well done!

[@angrylee7212]

I just ordered me a tiny hawk lol , can’t wait to start learning how to fly these drones and get one of these bad boys ! Good work with yours !

[@rst6590]

but first try in the free simulator FPV Freerider in Google Play Store 😉

[@Darksagan]

Tinyhawk is what I started on and I still fly it and love it. Go right into Acro..sim first though.

[@ldr8276]

Just ordered mine too! Can't wait.

[@doubletapgaming1189]

I got mine a couple weeks ago and love it! I am new to FPV also, still learning. Liftoff is a good sim....

[@___echo___]

small drones are great because the battery cost is sO much lower

[@alexandergines9930]

that gratifying feeling when ur quad hovers

[@StudioMusik61]

I can't hold to comment in first 8 minute watch.. 1st blood shock me 2nd Is that frog or drone?🤣🤣 3rd Yeaaa, successs drone fly👍🏻

[@juanboom1]

awesome energy and real-time things that happen when flying drones! thanks for posting

[@healharm9210]

grabing an armed fpv drone is truly stupid XD, greet in club btw

[@begoodeventphotography8029]

Great work guys! Loved the drama and camera work (ground AND drone)!

[@rst6590]

you need to get rid of that auxilation try some soft bumps below the Gopro

[@toti4152]

I tgink tuning the drone would be a better idea

[@aldenhauser9555]

He needs new motors. the ones he uses are old and very bad quality

[@ZaynePooleVideography]

I am just starting out on my FPV journey and this has been so helpful guys. Just shows what you can achieve with pure determination 🤙

[@sheevpalprotein7352]

Try tuning that thing to get rid of oszillations

[@aldenhauser9555]

Don't think that kind of oscilations is fixable. He needs to swap out the motors or maybe the frame. The motors are very old and super low quality which is probably the cause of these vibrations

[@alexanderblacker]

@@aldenhauser9555 yes it is!

[@chrismawson4430]

@@aldenhauser9555 Nah, you can still get smooth flying with old motors. Those are probably thrashed though.

[@aldenhauser9555]

@@chrismawson4430 old motors yes. but these are racerstar 2205. the lowest quality you can find. the berings are crusty and shot when u get them. if he got some decent motors, it would make a massive difference

[@mattrenshaw9216]

Yeah Racerstar... that name even frightens me. Banggood specials. Some T-Motors or XING or or :-p

[@singleonetv9354]

thanks for a lot for a tons of idea how to do FPV because i am planning soon my own FPV

[@ugpfpv361]

I know you said it but yes that was the number one thing NOT to do, he's totally lucky that's all the damage done to his finger... Sorry but want to drive this point home... IDIOTS!!! Oh and also that's why you don't fly over people... Drone looses connection and it will drop out of the air. Anyway welcome to the scene man👍

[@wardope]

it's gotten so easy to switch the rotation of the rotors. back in the early days. like 2 years back you had to swap wires on between the ESC and the motor. any of the 3 wire you would switch would change the direction. Today click a button reverses the ESC. :D

[@letzUploadit]

such an amazing video

[@TMSProductions]

Thanks!

[@anxietyfpv6072]

I have watched millions of hours of first person view drone footage. This is the best start up noob video I have ever seen good job great editing.

[@TMSProductions]

thank you so much!

[@Paco-ml1vy]

You have turned the ESC's upside down. The arrow of the ESC's is not seen. The engines change the numbering address.

[@gilgeladspusfjjfhio684]

:D

[@harrisongould9460]

Sweet editing, music that makes you shake your bones and engaging entertaining content...all of which I have none of. I can't even fly my DJI MINI in "C" mode and not crash and forget about editing...so lost. Keep up the good flying. Keep the blue side up.

[@phillkard]

14:10 my mind is blowing now

[@Heinrich1x]

What is your mind blowing on?

[@danman7665]

I really envy you, I started flying fpv about 3-4 years ago and stuff has improved so much lately and it’s so much easier now than it used to be to get started. Back in the day there were no simulator, you just crashed rebuilt and repeat :)

[@shivenverma]

Hey there, what simulator would you recommend to use?

[@rafekaren]

You inspire me, I want to do what you do, thank you for making stuff

[@StaticModel]

Omg this video is literally how to do everything wrong going into fpv drones :D Atleast one thing he did right (got decent 200 buck futureproof radio). Also you cant change direction of motors with one button enabled, rotation was already correct, but you only needed to tell a drone which direction is it (reversed or regular) :) Never leave balance plug hanging on your drone, it will get destroyed by propellers in no time! Otherwise, great entertaining video, fly save, enjoy the hobby!

[@StaticModel]

@@justingriffioen No, it will not reverse motors, it will tell the FC if you wired motors in reverse or if you set it that way in ESC configurator. One toggle wont make motors change the direction of rotation.

[@StaticModel]

@@justingriffioen dude, from your messages I can tell you are not very deep in to these things at all, first of all clarify your fc, bf version, or maybe that's kiss you are talking about, for example - am talking about fc guy used in video

[@sf2372]

even the next day ready for the first flight the props are still on wrong. this was a great vid. even with the blood loss.

[@hegauerfotografie2501]

He fly in his room and changed the rotors 🤦🏼‍♂️🤦🏼‍♂️😂 Because of that, the drone flipped over.

[@williamlee9669]

I am starting to learn about FPV drones myself and this is truly inspirational, thank you.

[@tylerbradley8124]

And........ this is exactly why the FAA is proposing remote ID :(

[@notkira_x]

What does this video has to do with Remote ID?

[@riccardovenditti4096]

Nice job those shots are extremely challenging for beginners

[@CENB71]

Can't tell if the guy who got cut are crying like a wuss or actually enjoying the pain lol. or both.. ? I'll vote for the pain.

[@aronkrathe9480]

I have watch for years, and watch this video again and havent notic you guys are twins 😂

[@just4883]

13:30 could someone pls name the song ?!!!

[@Isaac-uu8ie]

Shame by Windmills

[@just4883]

@@Isaac-uu8ie thanks Mate

[@adamhough4119]

Welcome to the hobby, I’ve Been flying for just over a year now. Honestly once you get better at building it’s almost as much fun as flying. Do yourself a favor, get better goggles, and a smaller soldering iron. Awesome video though!!👍

[@TMSProductions]

Thanks for the heads up. May need to invest in a better iron and goggles!

[@Knemer1990]

Get yourself some crossfire and some nice goggles. Don’t cheap out on telemetry or video.

[@SCFPV]

Definitely agree with that. I went through so many cheap vtx's, goggles, and modules (Once I finally bought a pair of Fatsharks). The best things I've done since I started flying was to invest in a Tbs Fusion, high quality vtx's, an Frsky R9M and started using smart audio. My video alone got a $#!+ ton better, just by using the Tbs fusion with an AKK X-2 ultimate.

[@42alastor79]

Great! Your shortcut is awesome, I enjoy looking for your exp!!

[@yamigosss]

По русски название: одна неделя из жизни рукожопа))

[@viper268]

I wish i had a fpv drone, it has been my dream. Your pretty good at that too

[@Ardenup]

auto leveling is cheating :P pretty much flying a DJI drone :P

[@louisevans8830]

Seeing some stuff like this before on KZbin and owning a few drones myself this makes me really want to capture footage like that wow!

[@MagicFPV]

Welcome to FPV! What an amazingly shot story

[@ws_budussy802]

Your a ligit movie u have amazing commetqry amazing editing and godd drone flyer now

[@louisevans8830]

Vlog life true man

[@purplemike4840]

When you get your first flip the feeling is just 💯💯 AMAZING I FELT LIKE A GOD WHEN I DID IT

[@pty507droneadventure7]

Thanks I been flying DJI drones for a while and this is a complete different expirience