Least cost method[transportation problem] in operation research.

It is described beautifully in depth.
It is explained in a very simple manner.
----------------------------------------------
• Unbalanced transportat...
Link for unbalanced transportation least cost method problem.

[@RohitChowdhury_sajaysaini]

For this problem..there are two possible answers 930 and 960. If you are getting any of these two..your process is correct.

[@jozlinjose3560]

960

[@bonniepeterson9154]

960

[@nivithas8492]

I got 960

[@abhigyanpandey2422]

Last two steps not clear

[@changwang5469]

Thanks! I got tried to select different 6, I got two answers.

[@Eric-mz7bw]

I CANNOT THANK YOU ENOUGH! 90% OF MY EXAM CAME FROM THIS AND YOUR OTHER VIDEOS.

[@tolish56]

You really did amazingly well, thank you. I understand Least cost 100% NOW!!! God bless you

[@Ariijiina]

OMG I don't know what to say and how to thank you , I can just say you are ever best lecturer I had ever seen in my life.....may God bless you forever

[@G4g7743]

you are literarily saving my life with these videos i have exams and didnt no where to start thanks a lot

[@ItachiUchiha-nx2sw]

Thanks for keeping more than one same cost

[@waleedshahid1740]

😂😂😂

[@klahari968]

Thank you very much for your wonderful explanation sir.. The way you are teaching makes me to understand easily..

[@abubakarmuhammed289]

Thanks for this wonderful video sir. Formally, I thought both north west corner method and least cost method answers will be the same. And I keep on solving and I found out that my answers are not the same until after I watched this video. And now my doubt is cleared. Once anew thank you sir for this wonderful video.

[@lizbethlamprea5147]

got 960 , this video helps me to understand well transportation method.

[@RohitChowdhury_sajaysaini]

kzbin.info/www/bejne/ZoObin-Yq9Cmn6s This video is on unbalanced transportation. Hope it will benefit you

[@aidahanwar7311]

i regret not findign your videos before. my exam is in 2 hours and i'm speed running my studies and i realize i should've found this before. anyways, i understand very easily and will write this is exam. subscribing to you because your explanation was amazing

[@nikhilgarakapati566]

He's having 3 infinity stones with him

[@bhavyadixit1354]

NiKhil GarakaPati hahahahahaha hahahahahaha Hahahaha you’ve got a point bro.

[@NitinKumar-wd8id]

😂😂😂😂

[@sammyejeh31]

😂😂😂😂

[@Truth-34694]

Thanos ko bata na padhe ga

[@karurguys8216]

Your explain was very good sir.i easily understand.thank you sir

[@NELSON64916]

Kindly assist on this Assume we deliver ~5000 orders per day and that our top clients are catering companies like Dmark, oneL and Le Padg . On the supply side of the business assume we are actively working with 25 courier companies, in the next year we would like to be the go-to platform for courier companies, private fleet and commercial vehicles. The goal is to reach 100,000 deliveries a day operating in multiple verticals not relying on food.Please Consider: ● What other verticals (on the client side) should we consider and why (quick wins and long ones)? ● Select one vertical and show how you would go about it in detail (approach, value drivers, key sales messages, etc.)? ● What are the critical points for the business over the next 3, 6, 12 months and how would you track milestones? ● What specific obstacles do you think could stop you from closing new business? How would you tackle these? ● What other general challenges could you foresee and how would you tackle them?

[@Rahul_7987]

Your teaching way is very good thank-you so much

[@joshoti7333]

thanks.....3 hrs of class in about 14 minutes 🎉

[@nahidaanjum.a5700]

Ur communication will be excellent. Tqsm for that amazing understand

[@RohitChowdhury_sajaysaini]

Thanks a lot.

[@ciksayang1149]

Thank you so much... Easily to understand more than my lecturer teach... 😁😁😁

[@poojakedari7007]

Thank you sir I have exam on 2nd may ... I got lots of help from this video

[@cleanmind1184]

The best way of teaching that u have sir

[@elvis6911]

Thank you so much, You are a wonderful lecturer, I have a cat tomorrow and your lessons have been very useful sir.

[@mohdasim4015]

Sir ur voice is very clear i learn so many think from ur video by the greatness of allah i clear my exam also nice sir

[@meditate254.]

Am also preparing for my exams, this is wonderful

[@sikiruolusanya4521]

This is great. The explanation is very simple and very clear

[@abdulsalamimran6097]

Thank you very much, this video lecture is perfect and very helpful.

[@camanalibora]

Nice...conceptual clearity... Ty🙏😊

[@swapnasaritananda]

Thanku so much. Really your teaching process is so good

[@preethinaidu687]

Clarity explanation 👌👏👍 I am really understood 👌

[@babitakampa7883]

Thank you sir .... your explanation is very helpful ...

[@papazola7400]

Thank you sir! Ur explanation was very clear!

[@pavannirmal3170]

I am so grateful to you this video help mi to understand this method properly

[@suhveralum7721]

i dont know why but this is quite different from what i studied.

[@glomari62]

Very detailed explanation. Thank you sir.👍🏾

[@shripaliekanayake5107]

Thank you sir.. best way of teaching

[@blessingbanor3081]

Quite helpful.. I was able to solve my questions correctly.. Thank you!

[@Shiva88613]

you explaination...is just uncomparable...osm sir

[@amarjeetsangwan437]

at 4:26, in case of a tie, you must choose a cell where maximum allocation is possible, and not as you said the demand is high... Because even with high demand, if supply is less then the allocated value will be also less.. You can refer any textbook to check what am saying...

[@RohitChowdhury_sajaysaini]

What you are saying is absolutely correct. But in most of the books and in any standard video lecture you will find that in case of a tie you can break it arbitrarily...and yes it is absolutely correct..In the video I said alternative but even in least cost method if anyone breaks a tie arbitrarily he or she is not wrong.

[@joycelakire4392]

Thank you this has been helpful to me

[@lawrencemwansa290]

Very clear Thank you very much intellectuals

[@mesbahhasan733]

Amazingly described ♥

[@shubhamvarshney3665]

thank u sir sir only lowest cost smjh ni aa rha tha ab aa gya

[@mulugeteskezia5156]

Thanks so much for your clear presentation and explanation. Is that the total cost = 960

[@RohitChowdhury_sajaysaini]

Yes correct answer

[@saikumarnerella5713]

Thank you very much. The explanation was really good and helpful

[@faithtapiwanashemaruza5026]

may you be blessed abundantly

[@Sabales]

Clear explanations, thank U.

[@meenakshis3530]

Thank u but u put all resource management concept method to clarify. 😃

[@siddalingeshmkori8166]

Thanks for uploading this video because of its helps to a lot...

[@bhoomikahj3426]

Tqq I understood this problem by seeing this vedio...

[@nallasundarajan]

Excellent explanations. Thanks very much

[@senthilsenthil359]

It is so nice to see this sum thank u for teach this 👌👌👌👌

[@shanicegrant4995]

This was really really helpful. I appreciate it

[@josedelavega99]

Thank you sir. You've been great help👏

[@krishnareddy-hy9cp]

First allocate 20 but not 50. We always prefer to give first priority to least supply/demand is we have common cells more than one.

[@priyankamane2568]

Thanks sir 👍 it's very useful

[@Lifeofsharmaji01]

Very useful it revise my chapter

[@AkashKumar-ux2tp]

Thank you Sir...your videos are really helpful.

[@rezwanurrahman3655]

When there is a tie with the lowest element, u told to select the element which has maximum demand. But I think I read somewhere, that, we have to select that element which we can allot the maximum units.

[@abhishekbhimshetty8233]

Both means the Same bro ....no difference

[@ashokchand1182]

Hello Sir how to solve this problem when Supply and demand is not provided using LCM

[@ruthless9483]

Awesome way of explanation..

[@saptabanhimajumder1642]

Awesome lecture.

[@meghabansal3224]

Nice explanation.....thanku so much sir

[@JoeFreemanOfficial]

Fantastic. Understood. Thank you Sir

[@AdamzyLee]

there is problem with F3 and S4. at the last part, where we have 50 demands and 50 capacity. why do you put 40 above 8 and leave capacity 50. but you cross the 50 demand.?

[@mohammedrafi2559]

Understood clearly tqu

[@gopalkonatala9764]

Thank you sir , I understood easily

[@berniceyevugah7308]

This is GREAT. Thanks a lot. But I have a question. I tried assigning the demands differently and i got 5 instead of 6 transactions. could you please understand why.

[@mdmirazulalam9688]

Love you bro.You gave me much relief.

[@rohitbarman3815]

if you solve it by lower 6 ( 3rd row 3rd column) , different ans will come , which will be more optimal.

[@RohitChowdhury_sajaysaini]

Yes it can be .. answers may vary.. because these are not optimal solutions. For optimization you have to opt for Modi method or uv method

[@rajatmehra1294]

Abe yrr thda jldi btao baate dobara dobara kyu Bolre ho , yaha mera ppr 10 min me shuru hone wala hai 😂😂😂😂😂😂😂😂

[@highermathematics7051]

,hahahahaha

[@Stockskipower]

Fir bhai top maar diya kyaa exam me 😂😂🤔🤔🤔🤔🤔🤔🤔🤔🤔

[@amolparde7062]

Wtf dude....lol🤣🤣🤣🤣

[@tirthomajumdar4554]

Bhai speed badha ke dekha karo video 🙂

[@fancy-d3l]

Thanks for helping ....a question please if the demand is more than supply what do you do .....I my case demand is 3400 and supply is 2800

[@sumers9396]

clear explanation, thanks very much!

[@jamiurasak4791]

Excellent God bless you 🙏 my question is that if we are asked to find a schedule to minimize the transportation cost? How do we do it

[@rajaromeoraj3084]

Exalent teaching sir TQ v much sir

[@chrishearampuriire7500]

You are the best😍

[@RohitChowdhury_sajaysaini]

You can definitely list down the topics on which you need detail explanation.

[@sagarmalli6189]

Super explained🙏🙏👍

[@ricavargas3988]

thankyou so much sir! GodBless You Sir

[@rangeasma1766]

Really helpful thank you

[@chayanmajumdar4183]

after 1st 7 with the heighest demand 2nd 7 should be solved but why did u solve 8 and then at last 7?

[@rananandani1044]

First of all thanks for this video ☺️ but last me I am not understanding...but tnx

[@muhammadahsan3779]

excellent explanation

[@datascientist3663]

Thanks Man,I PASSED

[@saravanakumar7824]

Use full video sir

[@charithakrishnasai4413]

Thnk u sir i got it u said very clearly

[@HarpreetSingh-ey8xu]

No doubt awsm teaching

[@ericklemus4703]

you explained that so well

[@benardohuru9970]

Perfectly explained

[@prakharsharma1369]

If there is a tie in demand also what should we do ?

[@nimitagarwal9500]

What if we choose factory 2 to supply store 3 in step 2nd?? The demand of store is 50 also the supply of factory is 50 . Can we cancel both row and column at the same time??

[@akshaysareen6736]

Great work man.....keep it up..

[@supunsooriyahetti4656]

great job bro

[@rajasekharreddy4499]

Superb explanation 👌👌👌

[@salakoola4099]

Please i want you to explain it to the shadow cost, because that is where I am having a problem. Thank you

[@ishumuthugala384]

Thank you sir. From sri lanka

[@mosesmugecha4985]

Kindly do a video on Simplex Algorithm

[@aneeshas3373]

Very nice sir😊☺

[@abhishek-tn4cs]

thank you for the video it really helped

[@bahuleyanvenjaramoodubahul6151]

very helpful.. thank you so much

[@miscellaneous937]

Keep going ...thank you

[@jayashriv8602]

When allocating to cell ,if the demand and supply are same then what we should do?

[@Njoro_creatives]

Which method of solving a transportation model do you trace a closed loop ?

[@SJRai-eq4gw]

Sir if we take 930 means it is give problem in degeneracy methods 4+3-1=6..if we choose 930 in that only 5 allocated cells

[@shruddhapatil9729]

Thank you so much mam.....🙏🙏