Lectric Lighting Sharktooth LED Headlight Install :Weekend Wrenching

[@jpcycles]

Interested in more "how to's" and Road Glide content? Head on over to Countersteer www.jpcycles.com/countersteer?Lectric_Lighting_Sharktooth_LED_Headlight_Install_:Weekend_Wrenching&ETayZWCE

[@reidtommy7352]

i dont mean to be off topic but does anybody know of a tool to get back into an Instagram account..? I was dumb forgot my login password. I would appreciate any assistance you can offer me!

[@vivaanbo3905]

@Reid Tommy Instablaster =)

[@reidtommy7352]

@Vivaan Bo thanks for your reply. I found the site thru google and Im trying it out now. Looks like it's gonna take quite some time so I will get back to you later when my account password hopefully is recovered.

[@reidtommy7352]

@Vivaan Bo it worked and I actually got access to my account again. I'm so happy! Thank you so much, you saved my account :D

[@vivaanbo3905]

@Reid Tommy Happy to help :)

[@roadglide6250]

I have this headlight on my 2019 Road Glide Ultra. I cannot even describe how much better this headlight is than stock. Much more illumination on sides, and the high beam is unbelievably bright and has much greater distance. If you ride at night at all, this is the best upgrade you can possibly make. This is the headlight that should have been stock on the FLTR. For a few that asked, the stock turn signals still work, you have just ‘added’ the two built into the headlight.

[@freddychico3621]

can you get away with not using lock tight on bolts?

[@antoniolorca9620]

How do you adjust the height of the spotlight?

[@willial4]

Would’ve been good to see a before and after comparison.

[@J-BoProductions]

Any way to adjust the beam up and down like the stock unit? Say if rear suspension has been changed and headlight angle is different than stock?

[@williamjohnson6624]

That's why i installed custom dynamic tri beam headlight on my 21 road glide theh excellent.

[@southsoundrider5428]

I just bought an Eagle Lighting headlight for my Road Glide. Looks exactly like Lectric. Was it intentional that both brands look alike?

[@chrishunter5041]

That's a lot of hardware, are they plug a play? pity there was no before and after on the light performance, enjoyed the vlog.

[@kieranknox6565]

is there anyway to get that turn signal wiring harness?

[@JNMIII-xh1xb]

Is there a splitter on the wire for the turn signal if you are already running aftermarket fairing mounted turn signals.

[@thenerdybikervet3715]

I just picked this up second hand and low and behold, no turn signal splitter… does J&P sell a splitter? I couldn’t find one. Thank you.

[@pablodiaz8136]

Where do I Purchase the wire harness for my signal to my headlamp that’s in this video

[@tomhopkins6758]

Nice video. Thanks. (Some of these comments are ridiculous 🙄)

[@frankbelmont1426]

Installation on this light is possible to put Hi/low adapter?

[@jam471975]

I have an 18 RGS and the big problem I have with the stock headlight is when the high beams are on the actual low beams lights shut and you loose all that light directly in front of the bike. With the high beams on I literally cannot see any part of the road or ditch for at least 100 ft directly in front of my bike... I feel very unsafe to ride like this. I did get the headlight alignment checked to make sure it is aimed properly. This is an extremely bad design on Harley's part. I've never owned a vehicle where you loose all sight of the road directly in front of the vehicle when the high beams are on... this is especially unsafe on a motorcycle. So my question is... how does this light behave when the high beams are on? I want a headlight that when you have the high beams on you get the same great visibility of the lows directly in front of the bike along with the higher long distance light down the road of the high beams.

[@snakeoil2182]

Looking at the ground in directly in front of you will make for an F..... up night. Never had an issue with the high beams on my FLTRXS.

[@richardbridgetsettle1699]

You didn’t show how you hooked up the turn signals already on the fairing. Do they still work

[@jpcycles]

We do show that. They stock signals still work because of the splitter that was installed kzbin.info/www/bejne/amfLdoeXrr-Keac

[@johnluckett2459]

I had this light installed on my bike.... When I go to auxiliary the light stays on, Even my back running like stays on in auxiliary mode... Please tell me how to fix this😎👊🏽👊🏽

[@pongphonsasomsub7002]

How about turn light? Is it still working?

[@Taurian321]

I have this light, it's awesome. Great video.

[@mu11ett]

Taurian321 any chance you can share a video of it at night. I’m in the U.K. so would love to see the performance before ordering one. Cheers

[@phswildcats07]

i dont get why this one is $800 but the advanblack is $575 for the same headlight it looks like?

[@genebuchheister1562]

Question... on my '21 RG I have a screen w/turn signal (custom d) would this light still work?? Thx

[@timdavis8154]

What is the difference between my day maker head light and this one?

[@TwoWheelGarage]

This one allows you to look like the challenger 😉

[@jpcycles]

This light has a higher lumen rating and has built in turn signals.

[@smokeGR14]

A before and after light output would have topped it off. Srry

[@daveperson1722]

There’s wayyy too much stuff holding in the light 🙄

[@jspeerpls]

Cheap junk from China these lights are 160 a piece on alibaba

[@jportugaise]

Don't talk so fast, I can't even hear your name !!!!