Road Glide Headlight Install, Ride, and Review HogWorkz Dual Visionz

[@ssgveight]

Love the meticulous breakdown and the effective use of camera angles where you didn't block the camera during any of the teardown / re-install procedures. I also love the fact that your background music volume lowered during your explanations of each step. Made it really easy to follow along and eliminated distractions. I'm definitely gonna pull some scratch together and buy me one of these headlight assemblies. Great video brother.

[@RAIDERWORLD]

Thank You! I definitely appreciate it. I’m a firm believer on camera angles. Also, you have to see what you’re actually doing lol. Thank You again 🙏🏽

[@MinnowMoto]

I have watched a ton of Road Glide teardown videos, I have to say yours its the best. Very easy to follow. Thanks. Subscribed.

[@RAIDERWORLD]

That’s awesome! I definitely enjoy making these videos. Also, Thank you for watching 👍🏽

[@craigffb]

I’m probably gonna have to replace mine, right side low beam is noticeably dimmer. I like that way the light looks. But I’ve watch this video several times and even asked some else to watch it and to both of us the HD/OE light looked brighter.

[@RAIDERWORLD]

The GoPro video does not do this headlight justice. It’s definitely brighter in person. Also, Before I did this video, I didn’t realize there was an adjustment knob on the back of the headlight. It’s covered by a cap. I’ll be doing another video soon on how to adjust the headlight. When I made this video the headlight was slightly pointing up. I was lighting up the trees overhead. Hope this helps. Thank You for Watching 👍🏽

[@billboppre7345]

@@RAIDERWORLD Hogworkz must send them all out pointing too high. Mine was aimed as high as it could go shining in the trees. Not an easy adjustment either. Very disappointing.

[@tommypadron4217]

I've seen a lot of LED headlight videos that show the install but this one is the most comprehensive. Easy to follow with a direct comparison to stock and torque specs for the screws (which is huge for me). I'm definitely getting this headlight

[@RAIDERWORLD]

That’s awesome! Thank You. I definitely try to throw as much information out there as possible. It’s honestly one of those headlights that you would appreciate more in person.

[@111Glenn]

Installed the light....Soo much better than stock. Had to adjust the vertical on the light. I was getting "flashing" from cars, even on low beam. It was shooting 9 inches too high. You cannot adjust the beam height without removing the fairing....UGH! The adjust bolt is not accessible. So do it before you reassemble the fairing. Turn it CW to lower the beam. I turned my 2 complete turns to have it in the service manuals specifications.

[@RAIDERWORLD]

I was not aware that you could adjust the headlight until after I did the install. And I did notice that it was pointing up. I actually still need to adjust mine, so thank you for the info. CW it is, I’ll also do an update video on that. Thank You for the Support 🤟🏽

[@BubbaXL308]

Following, I was unaware of adjustment myself. It is an awesome upgrade but I as well get flashed from about 1 out of 10 cars . I’m assuming clockwise is down?

[@billboppre7345]

This just sucks you cant adjust it after install..so ridickulous

[@Knight_Glider]

Respect!! Respect!! Too many guy post helpful videos such as but barely any take the time to answer our questions!!

[@RAIDERWORLD]

For sure! Anytime 👍🏽

[@ZevGriffin-s5u]

Outstanding video! Appreciate you. Thanks!

[@RAIDERWORLD]

Thank You! I definitely appreciate it.

[@GhostRyderID]

Really great how to video, I would totally take this on after watching that comprehensive bit of instruction. On the riding demo though, I can see that the HW low beam has plenty more lateral illumination than the the stock headlight, but I could not see any difference at all between the HW low beam and HW high beam. I re-watched it several times trying to see if I missed it, and I could never tell when the high beam was activated beyond you saying you had activated the high beam. Is there any notable difference on the road ahead of you on high beam?

[@RAIDERWORLD]

Thank you for watching. There is a noticeable difference, but the GoPro was not picking it up very well. Unfortunately when I filmed this, it was foggy one night, and not the next so that didn’t help. Hope this helps

[@fbja07s40]

Great video. I just recently got this light for my 21 RGS, haven’t installed it yet. Your step by step install process seems real easy to follow. Don’t know if I will have to adjust mine, but if I do I will be looking forward to the adjustment video. Again really appreciate the info. As a side note all of your step by step videos are on point and super easy to follow. Ride safe

[@RAIDERWORLD]

That’s awesome! I definitely appreciate the support. I’ll have an adjustment video coming up soon

[@stuartberke5845]

This was really good. I should get one of these. 👍

[@RAIDERWORLD]

Definitely a great headlight! Hopefully they improve/relocate the adjustment knob

[@stuartberke5845]

Oh yeah. I saw that. That might hold me back. Look at others. Thanks siiiiiir..

[@curtisck813]

Luv your channel my roadglide brother, most of the upgrades,I'm going to get...luv how u break the lil things down like important tid bits that are needed..luv the hogworkz lights...I just don't see that much difference in the 2..seriously, but I love your videos and this channel 🤙🏽🤙🏽🤙🏽#teamroadglide

[@RAIDERWORLD]

That’s awesome! Im glad they are helpful. I tried to catch the light differences, but the GoPro doesn’t do it justice. You definitely notice it in person. I’ll keep pushing these videos out! And Thank You for Watching 👍🏽

[@curtisck813]

@@RAIDERWORLD no problem my roadglide brother, I can't wait to put that spoiler on...that is bad ass!!!! We have the exact same bike..just different color "vivid black"

[@RAIDERWORLD]

That’s awesome! I definitely like the vivid black too

[@Tekhed454]

Excellent install video. Great channel, keep the vids coming!

[@RAIDERWORLD]

Thank You for the support!

[@fbja07s40]

Really appreciate all the info, my new hogworkz headlight went on n without to much issue. The little plastic things were a pain, of all things. But otherwise good to go. Thanks again. Ride safe

[@RAIDERWORLD]

Thank You! Glad it could help. Yeah, they we’re definitely a pain. I eventually threw them away. I’ll have an adjustment video coming out soon

[@johnford3761]

Great video! One of the best I’ve seen for detail and views on film. But, to me at the end showing comparisons it doesn’t look much different. Is it that much better?

[@RAIDERWORLD]

Thank You! I definitely appreciate the feedback. Unfortunately, the GoPros didn’t really catch the differences that well. Also didn’t help that it had just rained lol

[@russellabernathy3241]

Maybe it’s my eyes but the Harley Light is brighter to me

[@RAIDERWORLD]

When I initially did this install, I wasn’t aware that there was an adjustment knob on the back. If you watch the video again, the headlight is slightly pointing up in the trees. I have a video lined up on how to adjust it.

[@kellybgliding]

I’m sold!! Thanks 🙏🏾

[@RAIDERWORLD]

Hell yeah! Obviously they are brighter in person 👍🏽

[@6806goats1]

Any updates on headlight adjustment? Trying to get my 2020 RGL to the same or better lighting that my 2011 Ultra with Trucklite phase 7 LED headlight and LED spots did. That beast was bright. Thanks

[@RAIDERWORLD]

I haven’t gotten to that video yet, but I will soon 👍🏽

[@shawnpottebaum7523]

You should do a garage tour video. Also great videos

[@RAIDERWORLD]

I might just do that! Thank You for Watching 👍🏽

[@stanmorton8975]

My 2021 114 road glide special stock lights seem pretty bright already?

[@RAIDERWORLD]

Stick with them. I like these for the brightness and looks 👍🏽

[@cameronaaroberts4967]

Stock looks brighter. Would that not be the best reason to replace a headlight to see better at night?????

[@RAIDERWORLD]

GoPro Camera doesn’t really do it justice. Also, I didn’t adjust the headlight. It was pointing slightly up. There’s a knob on the back that you can adjust. Thanks for watching 👍🏽

[@111Glenn]

@@RAIDERWORLD Believe me its A LOT brighter than the stock '20 RG. I installed mine and had to adjust the beam vertical two turns CW on the adjust bolt....was shooting too high from Hogworkz.

[@cameronaaroberts4967]

@@RAIDERWORLD Can you adjust it and repost another video? Its a chunk of money to spend . I just want to see further and better at night. NOT buying a headlight that looks better. Want a headlight that performs better! So to me the most important thing is how it performs over stock at night! I cannot see why anyone would replace a good led headlight for cosmetic reasons...I am not rich so looking for performance. Does it work at night? Does it throw light further or wider? This is the important stuff. I buy bikes to ride, not look at. Imagine watching a video on new seat but no mention of long distance comfort..Just how good the seat looks! Whats your results?

[@brettcripps4523]

What brand are your socket wrenches? That swivel head is nice

[@RAIDERWORLD]

Absolutely love these! I use the tekton swivel head ratchet set here 👉🏽 amzn.to/3QsrNaH

[@3mrals885]

I want to buy the stock headlight if it’s available for sale

[@RAIDERWORLD]

You can DM at the email in the description

[@CrashMatRob]

Great Channel dude, can you tell what lights do you have in your front indicators? (turn Signals) they look brighter then the head lights, @9:13

[@RAIDERWORLD]

Thank You for Watching! I have the Custom Dynamics Bullet Bezel LED turn signals.

[@CrashMatRob]

@@RAIDERWORLD Thank you.

[@Chilllybob]

I didn't see any difference between high and low beam with the new lights, didn't show in the video also the stock look brighter.. were any of those stock headlights LEDs?. I just purchased a 2022 Road Glide Special supposed to pick it up today but I have a question about turning sharp on dark roads being the headlights are frame mounted ( don't turn with handlebars) . Please tell me if there's an issue for example if you turning right can you see the right side of the road or is it dark until you turn all the way. I need this answered ASAP I'm supposed to pick the bike up today . Thanks in advance

[@RAIDERWORLD]

It’s hard to tell off the video, especially GoPro cameras are terrible in low light conditions. I do see a minor difference in the 2 headlights, with HogWorkz coming in on top. Also, when I did this video I didn’t know there was an adjustment knob on the back. The headlight was pointing a little towards the sky, so after adjusting it, I noticed a bigger difference. I also like how this headlight looks in general. But this is just my opinion. Hope this cleared this up.

[@josephmirigliano8728]

Awesome video

[@RAIDERWORLD]

Thank You 🙏🏽

[@redrider0151]

By far and away best headlight video I have ever seen!! Thanks a bunch!

[@RAIDERWORLD]

Thank you for the awesome comment! I definitely have fun doing these.

[@redrider0151]

@@RAIDERWORLD Dude...I know how much work goes into making even a crappy video let alone one as good as this....thanks so much for all the time and effort you put into it brother! I couldnt possibly have a question on how to best do this..LOLZ

[@RAIDERWORLD]

That’s awesome! Thank you again. There’s always room for improvement. If there’s anything different you would like to see, definitely let me know

[@johnburk5748]

Excellent video. What made you go with the Hogworkz over say the Custom Dynamics for example?

[@RAIDERWORLD]

Thank You! I like the all blacked out look. Also, I’m not a fan of the Night-Rider-ish dotted light look. That’s just my preference. I do run the Custom Dynamics ProBeam Bullet Bezel Dynamic Ringz LED turn signals though. Thank You for Watching 👍🏽

[@johnburk5748]

@@RAIDERWORLD Are you happy with that Tekton inch pound torque wrench? I am looking for one.

[@RAIDERWORLD]

I am. I’ve had it for a while now. Very easy to use and maintain.

[@johnburk5748]

@@RAIDERWORLD I have these, they would look good on your bike www.customdynamics.com/probeam-dynamic-road-glide-led-turn-signals?cat=2

[@RAIDERWORLD]

Awesome! I’ll check it out

[@mikeg7850]

Great video

[@RAIDERWORLD]

Thank You! I appreciate the support

[@JamesWatsonPA]

How are you feeling about this headlight a year later? Great video, as always.

[@RAIDERWORLD]

I’m definitely enjoying it. I still have to do a video on adjusting it soon. Mine was pointing a little up when I first put it in, but didn’t know until later. I’m also a huge fan of the look

[@JamesWatsonPA]

@@RAIDERWORLD That's great to hear, thanks. I think I'm gonna get this headlight for my new bike. Looking forward to the new video, as always. Thanks.

[@RAIDERWORLD]

@@JamesWatsonPA absolutely! Thank you for the support

[@steikio1]

Since this upgrade to your roadglide, other than its just brighter, can you express what other benefits you've been able to see from going with the HogWerkz upgrade. Thank you

[@RAIDERWORLD]

Other than it’s aesthetic appeal and being bright, it’s easily adjustable (although you do have to remove the fairing and pull the headlight out) so I would definitely find your settings before reinstalling the fairing. It also has a lifetime warranty. That’s about it👍🏽 hope this helps and Thank You for Watching

[@MAHGlie]

I didn't see any difference in the low and high beam on the Hogworkz.

[@RAIDERWORLD]

Yeah, the GoPro didn’t really catch the full potential. Florida weather wasn’t cooperating either lol

[@abdallahmoussa1983]

am not seeing them as a big upgrade compared to oem harley headlights. Maybe am wrong

[@RAIDERWORLD]

The GoPro didn’t do it justice, but it definitely is bright. Both of these light are equally bright, but I’m a bigger fan of the look on the blacked out HogWorkz light

[@Redbeardedbiker91]

Happen to have a video on how to replace a well nut? Mines just spinning inside.

[@RAIDERWORLD]

Have you tried replacing the well nut?

[@Redbeardedbiker91]

@@RAIDERWORLD not yet. Scared to break something more. 😅🤣

[@RAIDERWORLD]

Haha! usually they just pop right out and you just insert a new one ☝🏽

[@Redbeardedbiker91]

@@RAIDERWORLD oh awesome, thanks you!

[@toddzimmerman5431]

how do you adjust the hogworkz headlight up and down?

[@RAIDERWORLD]

I just need to make a video on that. The cap in the back center is removable and there’s a screw you can adjust

[@RealSuperRando]

@@RAIDERWORLDyeah, and that adjustment screw is impossible to reach with the hogworkz light installed. You have to trial and error remove and reinstall until you get it right. A real PITA. But hogworkz always skips over this.

[@robertjr1254]

I don't think its 550.00 dollars brighter. Im not super happy with my stock but not sure the other was brighter

[@RAIDERWORLD]

The GoPro definitely doesn’t do it justice. I also didn’t know that there was an adjustment knob behind the headlight. I’ll do another video on that, because it makes a big difference. A lot of the light was pointing up ☝🏽 Thank You for Watching and hopefully I can capture a better look next time

[@tomasnordkamp844]

Do you know how to adjust it. I Think my i to High

[@RAIDERWORLD]

Definitely! Those black looking caps you see on the back, remove the one just below the harness in the center. You will see your adjustment screw there. Hope this helps!

[@tomasnordkamp844]

@@RAIDERWORLD absolut 👍👍thanks for your answer🤘awsome videos💪💪

[@RAIDERWORLD]

No problem! Anytime👍🏽

[@Pinozcyclezandridez]

Got the same headlight and my the plug is wrong! Fuck

[@RAIDERWORLD]

Awe man! Hope you get it figured out

[@airlinkssuspension5878]

Not impress with the light output

[@RAIDERWORLD]

GoPro doesn’t do it justice. But yes, both lights are bright. I personally prefer the HogWorkz

[@six8415]

Looks the same to me

[@RAIDERWORLD]

GoPro Video didn’t do it justice.

[@111Glenn]

Believe me its A LOT brighter than the stock '20 RG. I installed mine and also had to adjust the beam vertical two turns CW on the adjust bolt....was shooting too high from Hogworkz. @@RAIDERWORLD

[@kitkimbrough9441]

The end comparisons lack luster!!..Wtf.!??

[@RAIDERWORLD]

GoPro video didn’t do it justice. I like it 👍🏽