AWESOME VIDE I've been searching all over to find out how to get back to my factory settings after i change some without realizing they weren't dummy proof...( being able to factory reset like EVERYTHING else i tinkered with) its been impossible for me to find an automatic wsy to do that. I have 2000w dual hub motors 1000 front 1000back. I found your video at 3am my time after working on this issue since 10am i keep getting an understanding of 1-2 parameters per hr it seems. Your video is by far SUPERIOR to all the others I constantly searched for days and hours. I screwed up my settings about 8days ago. I've made progress i actually thought at 2am last night i finally got it but my speedometer isn't reading it stays at o. I feel like its between settings 5,6,7,8,13,14, and 15. I believe the culprits are 7, 8, and 13. Please advise. My bike is smlro xdc600 2000w dual hub motor
@xiangdongluo9361 Жыл бұрын
I am amazed peoples still find this video helpful after 5 years. It is time for lectric to upgrade their bike controls
@999pudge3 жыл бұрын
I just got mine today. This review is really helpful. Thank you for the good work. Lectric should put this info in the manual.
@phillee82574 жыл бұрын
I have an eahora x7 bike. It's got the exact same display. The bike comes with no instructions and this is the first video I've seen explaining how to make adjustments. Thanks a lot.
@kennethwhite62352 жыл бұрын
I don't like many videos and type in even less. Just wanted to say thank you for the video as I fixed the bike while my girl was on the phone with the company exchanging emails for some video to watch...we sent them your page and account.. hope in some way you get compensation.
@toyhaulen5 жыл бұрын
Thanks for posting. I have tried the cruise control but have not been able to get it to work. It is very easy to mess these settings up, I had to contact Lectric to get the default settings as well.
@hikazeyattis38284 жыл бұрын
Cruise control is there but does not come installed as I was told by Lectric!
@printer11054 жыл бұрын
Thanks,,,I like to have as much info as possible about my machines and this really covers the settings for the control panel. You covered it well.
@LanceMcCormick4 жыл бұрын
You the man!! One bike came with wires unplugged under wrap. Was getting error code 008. Messed with settings without writing down. Weekend and lectric is closed. Thank u for having online!! Subscribed!! Woot!
@cliffdelbridge67323 жыл бұрын
You gave me a gift by explaining this. Thank you
@kellyrayburn40934 жыл бұрын
Actually on P08 the maximum usable setting is 45 which translates to 28 mph. Any value higher than 45 will default to 45. This converts the bike into a class 3 Ebike. Thanks for these settings. A few should never be touched like tire size (unless you change to a different size tire for some odd reason), battery voltage, number of gears, etc. but some, that are not in the manual, are very useful.
@xiangdongluo93614 жыл бұрын
Kelly Rayburn I did change tire size and battery meter in my later video to better calibrate trip meter
@kellyrayburn40934 жыл бұрын
@@xiangdongluo9361 So you're saying that the value of 20 on the tire size page gives inaccurate mph and/or odometer readings?
@xiangdongluo93614 жыл бұрын
Kelly Rayburn yes. You can check the display with a gps. Trip meter understates miles by about 25%.
@kellyrayburn40934 жыл бұрын
@@xiangdongluo9361 It sounds like something is malfunctioning in the computer if you get an accurate speed reading but the odometer is recording 3 miles for every 4 miles traveled.
@xiangdongluo93614 жыл бұрын
Kelly Rayburn that is true, other owners found the same thing so it is not specific to my bike
@whitewolfnk3 жыл бұрын
Love your video I have 1000w bike and my battery is full but on the display shows half thank god i find your video now I know what to do love
@aseelazar59462 жыл бұрын
What did you do? Mine battery keeps showing full when it is not. Is there a setting for the battery Display bar?
@boeclarke817 ай бұрын
Your video saved my dumb ass, thought I could mess with it and my bike was going throttle only. Thanks hero!
@kawasakiman89654 жыл бұрын
Excellent explanation of the lcd display just what I was looking for very helpful
@themadears4 жыл бұрын
Thank you so much, very informative! From lankeleisi user. It shared the same controller.
@yoHOBODAN4 жыл бұрын
I have 2500 miles on my Xp. I only got 28 miles in the beginning. But, as my legs got stronger, I am getting 32 miles per batt. I use 2 batts. My longest ride was 65 miles, 2700 feet climbed elevation, average speed 13 mph, average bpm = 103, and burned 2700 calories. I used pas 2, and gear 6 the entire time.
@jamesconner34372 жыл бұрын
Thanks. We new owners really appreciate real world riding info...
@yoHOBODAN2 жыл бұрын
@@jamesconner3437 2 and a third years since my first ride, I went thru my XP and bought a Rad Runner. Between the 2 e-bikes, have put over 13 thousand miles on, been hit by a vehicle twice, sent to the hospital once, almost hit twice, been bit by dogs twice, and the motor saved me from being bit a dozen plus times, and have had 34 flats. Have lost 90 pounds and legs are like tree trunks. This shit is addicting. Laughing Out Loud
@jamesconner34372 жыл бұрын
@@yoHOBODAN .....freaking incredible story🦵🦵🦵🦵...lol....Do you live in a warm state to get that mileage ? And what about the XP. comparison detail to the Rad ???? Congrats to you on your accomplishments ! The Rad Runner was my second choice, and just because of price I'm starting with the XP.
@yoHOBODAN2 жыл бұрын
@@jamesconner3437 James.... so glad you asked about my preference.... The Lectric lasted 2400 miles exactly before it gave me problems. Sat in the garage for 29 days while Lectric tried to get parts to fix. It took Throttle, Throttle cable, and controller to make it work again. In the 29 days wait, I purchased the Runner. THE ADDITIONAL MONEY FOR THE RUNNER IS WORTH IT AS I HAVE PUT ALMOST 11000 MILES ON IT WITH STILL NO PROBLEMS. Sorry for the caps. big fingers. Laughing Out Loud It just has better parts, I feel. I still use the XP when something else is wrong with Runner, example one of my flats was with a razor knife blade that cut the tire 2 inches. Didn't have a spare, so had to wait 8 days for another from Rad. Over all, the Runner is by far the better e-bike. more money though, and with the current inflation, it got way more expensive. I live in Central Arizona.. We don't really get snow, and if it did I wouldn't ride. I also don't ride in heavy winds, which at this time of year, I leave for my ride at 5:30 am and normally finish by 9, and still have to face about 15 minutes of wind. In the winter, it does get 16 degrees... Amazon and electric gloves, socks, bed for my service dog are all used... Thanks for allowing me to get that out, James. Dan n Mac
@yoHOBODAN2 жыл бұрын
I'm sure whichever you choose, you will have a great time. E-Bike riding has become my American Dream. I surely love it.
@cavanmactiernan346 Жыл бұрын
Thanks for this man, my bike didn’t have pedal assist and could only throttle when I pedaled beforehand or was moving, i just changed everything to default and got it to work, so thanks man
@civvys4 жыл бұрын
Thanks so much for all the great info and work! Helped me a lot with my bike!
@ziblot12355 жыл бұрын
Good stuff Mr Luo. Thanks a lot, but you know my energy bar waasnt working at all when I first got bike. I dont know what it was set on but when I changed it to 48, it was ok. I also had to reset P8 to 45kmh
@xiangdongluo93615 жыл бұрын
ziblot123 I heard new bike settings are locked now and can’t be changed anymore
@montecarlo45433 жыл бұрын
@@xiangdongluo9361 Nope I just received mine yesterday 10/03/20 and turned P8 up to 45kmh today now it will do 28mph in PAS 5 with peddle assist, and 23 mph throttle only
@SpyderSeven4 жыл бұрын
Great video. One thing I notice at 10:00 is that full throttle doesn't consume steady 20A for 20mph. Only does that during acceleration or with a lot of resistance, wind/hill. As soon as you hit 20mph, you'll use much closer to half that. I can use full throttle on flat ground and hold 20mph with 6A. I'm 160lbs and with unlocked speed limit and gentle pedaling, a solid 20A will get me to 28mph on the bike's own power.
@xiangdongluo93614 жыл бұрын
Spyder Seven that is true. 20A at 50 volts means battery is sending 1000w to the motor. Motor is only rated 500w so it is not sustainable to take 20 amps. I also noticed battery bar drops quickly when draining at 20A
@jamesconner34372 жыл бұрын
More real world info...keep it coming !! Respect.
@maxheadroom1506 Жыл бұрын
p18 is calibration of the speed to actual speed reading. you would have to measure against say moving car and compare what is on your display then do a ratio calculation and find out accurate % for your ebike speed reading.
@lookylookielokob.54933 жыл бұрын
explanations really helped me out. thank you
@geezerlife43754 жыл бұрын
Great informative video thank You!!!!! I have shared this several times on the facebook group
@alvideos21453 ай бұрын
Thanks, I had no idea what these codes meant.
@christopherpond37703 жыл бұрын
I think Lectric have messed something up with their amperage calculation. My number 14 reads 18 amps, but it claims to be pulling 20 with the throttle, as you say. I live on top of a mountain and I've burned out 2 controllers already by using the throttle too much... at least, I think that's why they are burning out. The printed messaging on the controller itself clearly reads 18amps as the controller limit, so if the thing is trying to pull more than that, it would make sense that it's self-destructing as a result. I don't know why it isn't obeying the set limit...
@jamesconner34372 жыл бұрын
This could be really bad if true. What has Lectric tech support told you ? Did you pay for both new controllers ?
@markrothenberg98673 жыл бұрын
great information. thanks. Although I don't have the same bike I have the same controller and display screen
@randomteacher Жыл бұрын
Thank you, I can now print a cheat sheet to carry with me.
@jpmaddux39255 жыл бұрын
Wow! Hey, thank you for getting this altogether and figureing it out! (probably going to need it), and it saved "me" a ton of research and phone calls :) Enjoyed your first video, and looking forward to the next one. Hopefully my two bikes will ship next week.......running out of good weather here :(
@xiangdongluo93615 жыл бұрын
It helped me too. This is so useful to modify my bike
@shawnr82152 жыл бұрын
Excellent explanatory video.
@josephmelcher13124 жыл бұрын
Very nice explanation, Thank you.
@crypto.arab22873 жыл бұрын
Thank you very very very very much شكرا جزيلا لك
@luimobilefixes52795 жыл бұрын
Good job 🖒
@garyswitzer68674 жыл бұрын
I believe P18 can be used to correct for any speedometer inaccuracies. So you probably could leave the tire size correctly at 20" and make any speedometer corrections using P18. I wouldn't think this needs adjustment but someone reported they did, assuming all other settings are correct for this Lectric XP model, then this could be adjusted downward from there. So 95 would then indicate a speed 95% previously shown on display. Probably best to adjust for an accurate readout at a midpoint, commonly used speed, say 10 to 15 MPH.
@nava85293 жыл бұрын
Super super helpful, thank you 🙏🏽
@breezinoz3 жыл бұрын
Thank you. That was a big help 👍
@MichaelFergusonVideos3 ай бұрын
Very helpful, thanks!
@kjts33Ай бұрын
What PAS would you set to achieve maximum range? My goal is to go at least 40 miles on a single charge (beyond PAS level 1). What do you suggest? Thanks for your help😊. I have the Lectric XP 3.0 Long range.
@xiangdongluo9361Ай бұрын
@@kjts33 I use pas 1 but no matter how I try I can’t get over 35 miles. Normally I get 30 miles. Pas 1 limit current to 2amps so in theory it only consumes 100w. With battery size of 700wh, it theoretically could last 7 hours. Even with 85% efficiency it will last you hours. In reality it can’t last more than 4 hours
@odiadisylvester8675 ай бұрын
U saved me a lot of problems
@maini-lasvegaslivin82587 ай бұрын
I just git mine too i love it i cruse around vegas on it
@jim52693 жыл бұрын
Please check P 05 the correct factory default setting is #1 & P 06 should be 22" (tire height) not wheel diameter. This according to Lectric, overall very informational
@xiangdongluo93613 жыл бұрын
Jim Prashker they must have changed this. The doc I got from lectric last year was 20 for P06 not 22. I will pin your comment to the top so people can see this. Thanks
@jim52693 жыл бұрын
@@xiangdongluo9361 thanks for checking. I was thinking the same thing. I received the values today. Happy New Year! Keep producing those great vids!
@dennis90382 жыл бұрын
@@xiangdongluo9361 The setting for speed is P8 , but setting this to 25 does not limit the pedal assist to 25kmh. My bike has a 1000w motor and I guess that setting P8 to 25 will set the maximum wattage to 250w (25% of 1000w) but I would like to set it in a way that PAS1 DOES NOT assist to 15kmh bit rather 5 or 7kmh and PAS2 would go to 10 and so on . Now my pedal assist 2 makes the bike go up to 20+kmh . Thats a problem but would be nice to ride it legally. Can you explain how i controll the pedal assist limit to 25 kmh?
@xiangdongluo93612 жыл бұрын
@@dennis9038 I have never tried your 1000w motor so I can only make an educated guess. P14 set current limit. If you lower your current limit then effectively you downgrade your motor to a lower power. This way you can lower your PAS1 speed. I don’t know if this works. Thanks
@nazeemhameed91733 жыл бұрын
Thank you for this very useful video. I have an issue with P 05 settings. The value stays on 003. It starts blinking when I press the +/- buttons, but won't change the values. Did anyone else face the same problem? Thanks.
@BN992392 жыл бұрын
Newer versions of the Lectric, especially v2.0 will lock you out on some of these settings. You can see it but cannot change it. They probably don't want people to mess things up and sending them emails all the time. There is probably a way to override the lock but I have a Lectric 2.0 and I cannot change quite a few of these settings
@jennyboy52262 жыл бұрын
I have this same problem with my NEW Xp LITE , i attempt to change the speed setting to 45 but it simply blinks and doesn’t move. While all others that I’ve seen have been able to change it
@dumpstadee83712 жыл бұрын
i would like to know if there is a setting for how the power is brought on. my bike jerks on the power too fast. i believe this is hard on the gears inside the hub because of the sudden torque
@wakandaforeva75883 ай бұрын
Hi, I have an Akez King King 1500w 48ah, what should the P07 setting be?
@thefix-itguyreviewer81512 жыл бұрын
You should change the tire size in settings to accommodate the accuracy of your speedometer. Out of the box it's set for the speedometer to read like you're going faster than you really are. You download a GPS speedometer from the app store or the Play store. You watch it while you drive versus your miles per hour on your display. If the speedometer shows too fast versus the GPS you have to make the tire size bigger... Play with it until you get it accurate IT'S ALWAYS INACCURATE UNLESS YOU DO THIS. This is why a lot of people keep saying it goes 28 mph when it really doesn't. It may show 28 but you're really not going 28. Throttle only the bike only goes 24.5 if you unlock to the highest speed. That's all you're going to get out of a 500 watt motor. The only thing I wish it had and it looks like it doesn't. You cannot change the PAS levels for each 0 through 5. In other words if you're getting ghosting when you pedal you should be able to change the power for each of the PAS levels. I could do that on my GeForce bike I cannot do it on this one.
@xiangdongluo93615 жыл бұрын
Figured out what p19 does now. If 0 then pas can go down to 0. If 1 then pas can only go down to 1 and won’t go to zero when pressing down button
@user-hx9dc5gr3l4 жыл бұрын
Sound like c 4 wellfrgo. penting trmessing doing mind game,i leave this bike alone freedom is gone-
@proplayerrachidy93693 жыл бұрын
Which bike is gw20
@vladimiroller31162 ай бұрын
I have a Paselec gs9 electric bike. After about 20 minutes of uphill driving (at 1st degree of electric support), the electric support came to a complete stop. I had to turn the battery off, wait a while and then turn the battery back on. The electric support restarted. However, the situation repeated in a short time. Within 30 minutes it happened about 10 times. Finally, the display showed error 009 and electrical support was not restored. Can you advise me what error 009 means and how to fix it ?
@xiangdongluo93612 ай бұрын
@@vladimiroller3116 this is a typical battery overheating issue. May need new battery
@vladimiroller31162 ай бұрын
@@xiangdongluo9361 Thank you for your soon answer. I recharged the battery to 100%. Recharging was without problems. I will check real voltage of the batery.
@BuildingCenter4 жыл бұрын
I wish I could add a like per page of explanation.
@ChilledSpirit-fs2mj2 ай бұрын
I have a bk29 hitway ebike how you get your pas to 7 an sow on I can only go up to 3 pas?
@lukejames275Ай бұрын
When I lower my bike wheel size it goes fast but won't tell me the speed and I have 20 x 4 tires
@xiangdongluo9361Ай бұрын
@@lukejames275 you can use your phone gps to check speed
@lukejames275Ай бұрын
@xiangdongluo9361 my monitor won't let me go over 15 mph if I set it up right. But if I tell it I have small tires it will go faster for some reason
@blueeyedsoulman3 жыл бұрын
Just got my XP and many of those program edits are factory locked. For example mine is locked at 22 for rims also 0-2 gears and I can't change them to correct them.
@user-hx9dc5gr3l4 жыл бұрын
This display is on mutiple unit not just lectricbike. Wup with phone and pod,you mean the 38183or just7371219
@stevenlam25134 жыл бұрын
Thank you very much!!!
@misterrobert6799 Жыл бұрын
I heard that they are now shipping them with oars for faster paddling
@seven777605 жыл бұрын
I love your video. I have the Lectric XP. How do you get into the settings to change them? Thanks
@xiangdongluo93615 жыл бұрын
If you hold + and - buttons the same time , lcd panel will start flashing. You can press mode button to go to different settings. Use +/- to change value and hold both buttons again to complete.
@seven777605 жыл бұрын
I watched your other video and found the answer! Thanks for making the videos. They really helped me!
@Humanature853 жыл бұрын
Hi, I ask you for advice, I changed the parameters from the display, let it automatically return to the HOME screen, then I turned off the display and removed the key from the battery. If I turn it back on after a few minutes it keeps the saved parameters for me, on the other hand, if I let more time pass, the default parameters return to me. Am I wrong something? Do you think the display or the control unit is faulty?The km / mile, on the other hand, always keeps me saved. Thanks
@xiangdongluo93613 жыл бұрын
Humanature85 this has never happened to me. My unit always saves my changes and never returns to default. You may need to ask Lectric for this
@esn20005 жыл бұрын
Interesting!!
@niamatullahkhan44164 жыл бұрын
Brilliant
@randyjohnson97602 жыл бұрын
You have the XP 2.0 or original? I have the 2.0 and when I sent to unlock it I was told to go to P8 and turn it up to 45. Mine does not have this an option, I can only go to 100. I assumed this was an adjustment they made but I am not getting to 28mph unless I'm going downhill and peddling hard. Bike is new, trying on a full battery. Anyone else have this issue? Im also only getting about 10 miles per charge. Even in PAS 5 I expect more than 10 miles. Feel like I missed something on my settings or something
@xiangdongluo93612 жыл бұрын
I have only original
@MaximoToro2 жыл бұрын
What does turning "manual" ON or OFF do???
@xiangdongluo93612 жыл бұрын
Can you be more specific?
@xiangdongluo93612 жыл бұрын
@@MaximoToro I see. I think light was turned on. It means nothing from setting perspective
@MaximoToro2 жыл бұрын
@@xiangdongluo9361 did you ever find out what P07 means? Lol
@xiangdongluo93612 жыл бұрын
@@MaximoToro I think it is intended for a different type of motor. It has nothing to do with lectric bike
@ozydozzy2 жыл бұрын
How do i access this setting? I tried pressing buttons on the controller cant seem to find all of these settings.
@xiangdongluo93612 жыл бұрын
Just press both + and - buttons the same time and hold for a few seconds. Thanks
@ozydozzy2 жыл бұрын
Ok i'll give that a go. Thanks.
@rockiemountin7535 Жыл бұрын
How do you turn on the headlight with this display
@xiangdongluo9361 Жыл бұрын
Hold + button for a few seconds
@BoTime3 жыл бұрын
May I ask a question? My ebike has the same settings screen. The manual I have doesn't address the question I have. In the box to the right of the PAS box, mine says MANUAL. I notice your box in empty. Do you know what this means? Thank you.
@xiangdongluo93613 жыл бұрын
I am not sure. It is possible your bike has an upgraded version.
@eastfam95163 жыл бұрын
Thankyou!
@allenhuffman4 жыл бұрын
Do you know who manufactures the computer this bike uses?
@xiangdongluo93614 жыл бұрын
Allen Huffman it doesn’t say but I am sure they are from China
@jacobaccurso Жыл бұрын
I came here to find out how to get into programming mode.
@willie902103 жыл бұрын
My throttle takes about 3 seconds to start moving forward and it does it in slow motion. How can I change that?
@xiangdongluo93613 жыл бұрын
Sounds like a faulty controller
@vf39634 жыл бұрын
On 15 the setting cant go up or down from 40 is that just for the newer bikes or is there another reason it cant shift from 40
@xiangdongluo93614 жыл бұрын
v D 15 is minimum battery voltage. Mine can be changed and is defaulted to 41.5v. If new one is at 40 it means it will extend range. I never reached that low when riding my bike
@mario123jon15 жыл бұрын
So can I upgrade to a LG 60V battery for longer range. P03 it shows it can handle up to 60v
@xiangdongluo93615 жыл бұрын
mario123jon1 probably. If you want longer range a better option is to upgrade amp hour from 10.4A to 14A. 60V will give you a higher power that could fry motor
@mario123jon15 жыл бұрын
@@xiangdongluo9361 Thanks for the info. maybe I will get a spare for now.
@thomasdipaolo23495 жыл бұрын
Batteries have been sold out for weeks
@terencetohjianhui91964 жыл бұрын
Hi can i know how to over 30 plus km per hour with this bike? I only can go 15 plus km with full strength pedaling which is very slow.. do you happen to know where’s the controller for this model s6000 thank you
@xiangdongluo93614 жыл бұрын
Terencetoh Jian hui unfortunately I am not an electrician and don’t know where the controller is. I can only adjust settings to make it more accurate and make sure it can send max power to the motor. If you follow my settings and still can’t get to 30km then something is wrong with your bike and you may need to contact manufacturer for faulty parts
@rogeredrinn45924 жыл бұрын
Just received my XP, July 2020 shipment. Wanted to change P05 from 1 to 2. Setting P05 is visible and the 001 flashes but can't change. P05 is not shown in the manual, P05 thru P07 are missing. However I was able to change P11 and P12 to new values. Has Lectric locked P05?
@xiangdongluo93614 жыл бұрын
Roger Edrinn that is possible. Lectric keeps charging settings. They locked most P values after I bought my bike last year, Then I heard they unlocked some again
@garyswitzer68674 жыл бұрын
Information that I found, which differs from above but may help you and may be in your case, directly from the Display Manf. info states P05 can only be "0" or "1". This is for the PAS Levels of your bike (& not bicycle gear levels). For the Lectric XP it should be set to 1. So for P05 meanings: 0 = 3 PAS levels model, yields: PAS Level 1: 2V, PAS Level 2: 3V, PAS Level 3: 4V; or 1 = 5 PAS levels model, yields: PAS Level 1:2V(12MPH), PAS Level 2: 2.5V(13.1MPH), PAS Level 3: 3V15.7(MPH), PAS Level 4: 3.5V(16.3MPH), PAS Level 5:4V(19MPH); Hope this helps for your particular display, which apparently is different from Xiangdong Luo's display.
@darkenheat3 жыл бұрын
Has anyone figured how to program P05 [I get 0 or 1 then 3,5, or 9] also need help with P07 if anyone has figured out
@darkenheat3 жыл бұрын
So P07 is the reduction ratio × magnet poles is what i have found out but the P05 is different for me.
@samuelthollot46383 жыл бұрын
It is the number of PAS levels available. More levels means you can adjust more precisely the level of assistance you want.
@QueenaBergen3 жыл бұрын
Looking to change my PAS 2 to max out at 12mph instead of 10. Is there a way to increase the max/minspeed on each PAS level?
@xiangdongluo93613 жыл бұрын
It is possible if you change tire size in the settings
@QueenaBergen3 жыл бұрын
@@xiangdongluo9361 what should I change the tire size too? I'd like the PAS 2 Level to cruise @ 13mph
@xiangdongluo93613 жыл бұрын
@@QueenaBergen You can try to change P06 to 22-26 and see if it does what you want. I have not tested this so this is just an estimate.
@smarshan3 жыл бұрын
how can I reset the M5 computer?
@romenigld4 жыл бұрын
My ebike is a 500W 48V12.5A Battery. So the 14P I put to set for 13 or 12?
@maxheadroom1506 Жыл бұрын
13
@josephmelcher13124 жыл бұрын
I was looking at PO7 and wondering if you change the value below 80 would this result in the bike going faster? Any thoughts on that?
@xiangdongluo93614 жыл бұрын
Joseph Melcher I never understood what p08 means. Magnetic motor ratio. Please let us know once you figure out
@dom37852 жыл бұрын
I had my ebike going 35-40 but I blew the fuse within 3 weeks
@dom37852 жыл бұрын
And if you mess with controller undervoltage I'm sure you could get a nice result just keep spare fuses on hand
@maxheadroom1506 Жыл бұрын
@@xiangdongluo9361 there is some calculation for this if you know the number of magnets in your motor. There is also a way to figure it out. I do not know if the learn wire function discovers this for you. I know you can use it to change direction spin of the wheel. it is anly used for programming not riding the bike.
@xiangdongluo9361 Жыл бұрын
@@maxheadroom1506 I thought it has 12
@SeanP71954 жыл бұрын
Can someone explain what I am doing wrong. My XP cruises on throttle at about 21-23 MPH. However, on PAS 3-5 it tops out at about 21 MPH no matter how much effort I give. I have done the unlocking in P08 to 45 but nothing, still stays as if its in class 2. I can't figure it out.
@xiangdongluo93614 жыл бұрын
SeanP7195 is your gear speed set to 7? I can go over 20 miles in speed but it takes a lot of effort to do so.
@SeanP71954 жыл бұрын
@@xiangdongluo9361 No, 4 or 5 typically.
@MrSavio92 жыл бұрын
Come impostare limit corrente sul display m8?
@nutsinstuffprod2 жыл бұрын
Are these settings for the 2.0, or 1.0 bike?
@xiangdongluo93612 жыл бұрын
It is for 1.0 but also works for 2.0
@ismaelvelez94643 жыл бұрын
Hi,how set up wheel size for ebike 26” x 4”,I have different reading miles
@xiangdongluo93613 жыл бұрын
Ismael Velez you can set P06 to 26 then adjust P18 to somewhere around 75 to see if it works. Thanks
@ismaelvelez94643 жыл бұрын
@@xiangdongluo9361 thanks.....happy thanksgiving
@user-hx9dc5gr3l4 жыл бұрын
Onenextbike
@MyDam182 жыл бұрын
For some odd reason I can't use throttle unless I'm in p 2..is that normal
@xiangdongluo93612 жыл бұрын
Definitely not normal
@MyDam182 жыл бұрын
Maybe I messed with that po7..I tried 80 but it has mine going 48 miles per hour..im.trying to find a good spot maybe lower numbers im.not sure
@belar73354 жыл бұрын
can you help me it doesn't show me on the screen how fast I'm going
@xiangdongluo93614 жыл бұрын
belar 733 I don’t think I can help. Sounds like your display unit is malfunctioning. Please contact lectric. Their customer service is pretty good
@user-hx9dc5gr3l4 жыл бұрын
Theranch can unlock mile unlimited screw the limit 1000w extra batterygps.
@guillermogarcia4952 жыл бұрын
Which gear should be on P5?
@xiangdongluo93612 жыл бұрын
Can be any. I use p3. It is about how soon you want motor to assist you
@kaskas5084 жыл бұрын
Hello dear, what if the display at the bottom shows E 007 and the throttle is not working
@xiangdongluo93614 жыл бұрын
Kas kas oh. That means motor breakdowns. You can check my earlier video for error messages. kzbin.info/www/bejne/q5vLmXaBg7atpck
@kaskas5084 жыл бұрын
Ok dear thanks for your help; what should I do; how do I reset it; thanks for your response and your help
@kaskas5084 жыл бұрын
Hey dear; please how to restart it, this is my only means of transportation right now
@kaskas5084 жыл бұрын
Is it a way to restart it; a bottom to press, this is my first ebike
@garyswitzer68674 жыл бұрын
Check the motor quick plug; try to jiggle together tightly. Or perhaps it got moisture into that plug connection. Try to disconnect and let dry out for an hour or so and then reconnect carefully, but firmly. Also be sure you have a good charge on the battery. If not that; it could be a problem with the motor. If so, I advise to contact dealer.
@brigittewinterleitner36883 жыл бұрын
Ich besitze ein Engwe E-Bike 2 Pro 750 Watt und habe nun leider ein Problem. Bei Belastung funktioniert der Motor leider nicht mehr. Hat da jemand auch schon Erfahrung damit gemacht?
@jamesconner34372 жыл бұрын
Does Engwe have same motor and specs as this Lectric ?? Just set your controls to factory original before anything can really be diagnosed. You may have settings working against each other...;))
@JAlbertoDJ Жыл бұрын
What is P07?
@xiangdongluo9361 Жыл бұрын
Just used to adjust speed. Set to 1
@JAlbertoDJ Жыл бұрын
@@xiangdongluo9361 Then, there are 3 menus to adjust speed: P06, P07 and P18 ??
@xiangdongluo9361 Жыл бұрын
@@JAlbertoDJ yes. They all have an impact on speed
@cjay_0p4464 жыл бұрын
my bike keeps blinking Saying "E 008" and throttle and pas will not work now
@xiangdongluo93614 жыл бұрын
cjay _0p E008 is throttle error.
@garyswitzer68674 жыл бұрын
Yes, I see a publication that states E008 is Throttle fault. Check the Throttle connector quick plug; try to jiggle together tightly. Or perhaps it got moisture into that plug connection. Try to disconnect and let dry out for an hour or so and then reconnect carefully, but firmly. Also be sure you have a good charge on the battery. Hope this helps.
@Paberu85 Жыл бұрын
P7 - absolute number of pulses per one wheel revolution of speed hall sensor.
@Masters-of-the-UniverseАй бұрын
1 pulse per revolution? Does that even make sense?
@Paberu85Ай бұрын
@@Masters-of-the-Universe Don't forget - that's a Chinese product you are dealing with.
@A.grauer6 ай бұрын
the Display want a password from me but i dont have one.
@xiangdongluo93616 ай бұрын
Usually 0000 or 1234
@josephmelcher13124 жыл бұрын
What do P21 too P26 do ?
@xiangdongluo93614 жыл бұрын
Joseph Melcher couldn’t find documents for them. Please share if you see one
@josephmelcher13124 жыл бұрын
@@xiangdongluo9361 I will keep looking at cracking the controller unlock.
@giogio83832 жыл бұрын
Good day everybody, Tried to throttle my bike to 25 km / h I have saved the value 25 under p08, Nevertheless my bike drives over 40 km / h I want to be legal on the road Can someone help me? Should I change something else? I am grateful for any help
@xiangdongluo93612 жыл бұрын
Check you metric setting under P02. 0 is for km/h and 1 is for mi/h. Choose 0 so you Speed is measured by km. Alternatively you can lower P08 to a lower number like 16
@giogio83832 жыл бұрын
@@xiangdongluo9361 Thanks very much, Is at 0, i.e. km, I also tried 10 km, saved, switched off, then switched on again, checked again in the menu to see whether the value was really saved, no change, 😪😪 Strangely, with pas 1 the bike goes 16 km h fast, with pas2 20kmh, with pas 3 25km, with pas 4 30kmh, with pas 5 full speed, I do not understand that
@xiangdongluo93612 жыл бұрын
@@giogio8383 then I have no idea. You may want to contact Lectric. They are pretty responsive
@katweregodfrey55833 жыл бұрын
How can I rest in km
@xiangdongluo93613 жыл бұрын
Change p02 to zero and it will show in km
@mt-spezi9618 Жыл бұрын
P08 doesnt function. From 0 to 100 makes no difference for final speed 25 km/h
@xiangdongluo9361 Жыл бұрын
Final speed is primarily determined by motor power. The setting makes no difference after 40. If you set it say to 16 then it won’t go faster than 10 miles
@brianwalter6874 жыл бұрын
Good video. How fast does your bike go in PAS 1? Both of my bikes go 12 - 14 mph in PAS 1 which is too fast for my wife. I have heard from other owners that their bike will go about 8 to 9 mph in PAS 1 which would be good.
@xiangdongluo93614 жыл бұрын
Brian Walter speed also depends on your gear setting. I use gear speed level 3 and get about 11-12 miles. If you choose a higher gear level then speed would be faster but also requires more paddling
@asiandragon7143 жыл бұрын
Have you figured this out? I have the same issue with PAS1 being too fast.
@brianwalter6873 жыл бұрын
@@asiandragon714 yes it was a misprogrammed controller which is housed in the frame by the battery. Had to disassemble and remove it to ship. Sent it back to lectric and they reprogrammed it. Now pas 1 is 7 mph, pas 2 is 10 mph and so on.
@asiandragon7143 жыл бұрын
@@brianwalter687 Thank you for your feedback. I was in a FB Lectric group and briught this up. Most were rude and if was reading it as kph rather than mph. I'm pretty sure I know MPH. thanks again.
@Lucky_Luke_46 Жыл бұрын
Hola, yo lo que he hecho es bajar en p8 la velocidad general a 19 kmh y asi la velocidad en 1pas sera de 9kmh..puedes ir jugando con esto A mi me va bien para ir con musculares
@celestewilkins2886 Жыл бұрын
Oui Oui!
@parksguy30183 жыл бұрын
👍🇨🇦
@Skate7673 жыл бұрын
HOW TO WHEELIE THE LECTRIC XP🔻 kzbin.info/www/bejne/pJiqinV_fLJrbqs
@hikazeyattis38285 жыл бұрын
I still can't get the bike to go over 20 miles an hour even tho I changed the speed limit data :/
@xiangdongluo93615 жыл бұрын
Check your current or amps drawing in display. Press power button 4 times to get there. If you are not drawing 20 amps then it is in the current setting or P14.
@hikazeyattis38285 жыл бұрын
@@xiangdongluo9361 I can't change the current setting, it is locked :( But thank you very much for helping, would you happen to know how to bypass this?
@xiangdongluo93615 жыл бұрын
Hikaze Yattis then I don’t know, my experience with this bike is very limited
@hikazeyattis38285 жыл бұрын
@@xiangdongluo9361 I figured it out, you can only go up to 28 mph on PAS which is easy since I can peddle as slow as I want and it will still run full speed, throttle even goes 22 mph! Rode it this morning, had a blast! Thanks again Mr. Luo
@jamalparkinson68274 жыл бұрын
Hikaze Yattis Hi. Got mine yesterday and having the same problem. What exactly did u do in the menu. I can’t go past 20 mph
@SeanP71954 жыл бұрын
I CANT HEAR YOU!!!!!
@Lawful1234 жыл бұрын
What?
@SwirusekXXX5 жыл бұрын
You can no longer change settings on bikes they shipping now. They locked them up
@xiangdongluo93615 жыл бұрын
That is sad
@jpmaddux39255 жыл бұрын
Really?!......so I can't (at least) set the peddle assist to zero?.....nor increase max speed to 28 Mph? That sucks :(
@williamnichols21245 жыл бұрын
just got my bikes 2 days ago called Lectric bike to see if that's true. They said you can still change pas strength and mph
@jpmaddux39255 жыл бұрын
@@williamnichols2124 Thanks William.....I get my two bikes on Monday! :)
@thomasdipaolo23495 жыл бұрын
We just received our this week and am able to change the settings. When i contacted Lectric about adjusting the settings they didnt mention couldnt change them. They actually told me how as mentioned in manual and in greater detail in this video.
@salvatoretrento40964 жыл бұрын
What's up with your audio? Sounds like you are speaking through a pillow