LED-lit Acrylic with Cameo 4 - Etching and Vinyl

[@Tigeabee]

😮 Impressiiiiive ❤ I love it. Always loved the etched acrylic but I think I like the vinyl a bit better. They came out so nice 😊

[@theodorehartman5086]

Very interesting. Just more you can do with Cameo. Thank you for showing all the procedures and materials need to get this done.

[@FreidaKirkland]

Excellent tutorial! I needed a refresher as I've not used the etching abilities for quite a while and you did a very thorough and complete presentation that is great for beginner or seasoned Silhouetter! Tyfs! 😊

[@ElleBeeCreates]

Thank you!

[@kattiaesixx]

Love how detailed your tutorials are. You just won a fan.

[@youngqueen306]

WOW thanks appreciate the video, very very helpful, Thank Jesus for Talent and for people like you to help us along the way! all glory be to God!

[@judyblaise1639]

I don’t have the Cameo 4, but I’ll try the etched vinyl. This is so cool and you explained everything so well. Thank you

[@ElleBeeCreates]

Thanks for watching!

[@jerilyncleere412]

I have a cameo 3, and I have used 2mm thick blanks with the chomas etching tool. I just have to pay attention to where I place it so the rollers don't go over it.

[@odettewatts2325]

Thanks very much for this. I have managed to make a template for my acrylic keychains

[@Jonfocus03]

Thank you so VERY much!!! I had NO clue this was possible.

[@kathleenvonthaden1289]

Thanks for this video! I'm so excited I just got the Cameo 4 and can't wait to try the etching!!!!! Great video!!!

[@ElleBeeCreates]

Kathy Thanks for watching!

[@ericanderson6352]

Thanks for video and upgrade alternative, saved $37 on business edition Thanks again

[@NikiZblessed]

Hello ... awesome tutorial! I am having trouble finding the acrylic plate . I’m only finding the light base ... on Amazon

[@ElleBeeCreates]

There are links in the video description of where I purchase my blanks.

[@NikiZblessed]

Thanks I figured out where the links were lol 😂

[@yvettewheeler9125]

Great video

[@peterbury691]

Great video, I am looking into buying a cutter and this was very helpful. Thanks!

[@focalpointcreations1731]

Was looking to see what engraving options there are... great comparison video.. new subscriber!

[@maryamalzaabi1363]

Can you show us a video about cameo 3 how to cut Acrylic please.

[@jeanspain8714]

Yes but it says NOT for older machines. I would like to be able to use it with my Curio too. I ordered some blanks that are 4mm

[@fleur_blanc]

Can i draw at acrylic with regular pen with cameo 4?

[@belishnikof]

Wow!!! So amazing thanks so much! When you say you washed it, how did you wash it? Soapy water? Thanks!

[@ElleBeeCreates]

I used dawn and a soft sponge so I wouldn’t scratch it

[@tracybest5790]

Place a sheet of vinyl UPSIDE down on the mat. Cut the "acrylic" shape out. Do NOT remove the mat!! remove the vinyl backing. Place the acrylic in the "cut out shape". the vinyl adhesive holds the acrylic in place during etching.

[@annettewornin7683]

Brilliant tutorial thankyou

[@KathysArtKreations]

Thanks for this video, my first etch did not work very well as the blade etched where ever it moved to so there are lines all over the acrylic. Do I just tape it in looser? | can't seem to find a way to get it up a bit higher to prevent the lines. Thanks if you can help!

[@ElleBeeCreates]

Kathy Cotter if you wrap some tape lower, around the notch, it will lift it a bit. I can’t post pictures here but if you find me on Facebook.com/ellebeecreates and send me a message I can send you a picture of a fix for that.

[@jerilyncleere412]

When I am ready to etch, I select sketch on the action setting, with pen as the blade type. Once I started doing this my etches were much cleaner.

[@laframe1016]

Hi thanks for showing this video really good . How much to charge for one acrilic ?

[@SirRonmit]

I know this is an old post, but I was wondering where I can locate one of those SAW BLADE blanks? I can't seem to locate one for a project I'm building for my step-father's bday. I don't have access to a laser cutter to make my own (yet). Thanks!

[@ElleBeeCreates]

Just noticed that the original website doesn’t carry them any more but I did find this one. Hope it helps! tidd.ly/45lv1Dv

[@SirRonmit]

@@ElleBeeCreates Thank you! .. Subscribed .. and I don't see a BUY COFFEE so when my Cameo 4 gets here, I'll upgrade the software using your link so you hopefully get credit back. Keep up the great work!!!! Tim N.

[@ElleBeeCreates]

@@SirRonmit thank you! I hope you love your Cameo as much as I love mine!

[@kmoffett71]

Great video. What blade did you use?

[@carmelita1.086]

Many thanks for your Video, ist helps me a lot starting etching with my Cameo4 I also use Metal Engraver for my Cameo4 to engrave Plexiglas (2mm). Unfortunately, he makes scratches where it shouldn't, for example when moving the position ... I've already reduced the pressure a lot but still ... did you have any idea how I can stop ist? Metal Engraver: Pressure 33 / Speed 15 / still scratches with Pressure 15 THX a lot

[@ElleBeeCreates]

The engraving blade in the description of my video is made for the Cameo 4 and doesn’t drag like the previous models

[@childofgod067]

Can you cut your own acrylic blanks/shapes with the cameo 4?

[@ElleBeeCreates]

No, the cameo will not cut acrylic, it will only engrave it.

[@jccreatives9619]

Usefull video dear. May i know which blade is used for cutting acrylic pls

[@ElleBeeCreates]

Everything used is listed, with links, in the description under the video.

[@ozziesoto2955]

Awesome video, I have one issue. I scan the acrylic with adobe acrobat and save it as a PDF. When I bring over the file to biz edition silhouette program it asks me to convert it to vector or image. It does not let me bring it as you have on your video to keep the aspect ratio. Any suggestions?

[@ElleBeeCreates]

Things have changed a bit. If you’re saving it as an 8.5 X 11 pdf, import as an image and ensure that the dimension of the rectangle are 8.5 X 11 and it should be good.

[@jeanspain8714]

Well you taught me all kinds of things...thank you very much for being patient with me. And you said YOU would not try a 4mm in the cameo 4, right? By the way I really enjoyed your video!

[@ElleBeeCreates]

No, I wouldn’t go thicker than 2mm in the cameo 4 for engraving. Even tho it has a 3mm clearance, I think that’s more for cutting objects. For the 4mm, I suggest you use your curio. Thanks for watching!

[@NinaS___]

Chomas (not chRomas) has come out with a Cameo 4-version (or rather 2, regular and fine tip) of the engraving tool now. :) Also pen and marker holders for Cameo 4.

[@ElleBeeCreates]

I learned about the new cameo 4 version just the other day. I’ve had mine for awhile from my cameo 3, I definitely plan on checking out the new one!

[@codiecapper9711]

Where could I purchase the one for the cameo 4 ? :)

[@chanellarsen5619]

@@codiecapper9711 i got mine off amazon and it is shipped from the USA from Amy Chromas who is the creator

[@codiecapper9711]

I found this one on Amazon, I'm in Australia, I have a cameo 4 www.amazon.com/Chomas-Creations-Silhouette-Cameo-Engraving/dp/B084T6BZYV/ref=mp_s_a_1_7?dchild=1&keywords=Chomas+Creations&qid=1599184092&sr=8-7

[@jolupe]

Dumb question here: can than material be cutted with the cameo?

[@tedyantothe7744]

What kind of blade that you used to?

[@GenesisUrquijo96]

Do you think a 1/8" thick acrylic plate would fit fine in a silhouette cameo 3? I have the engraver it's just seems like it barely fits in the slot. Havent tried actually engraving it since I'm scared it'll get stuck.

[@ElleBeeCreates]

I think that would be too thick, that’s over 3mm and the max is 2mm

[@Misscircle1976]

Se podra grabar agrilico con la cuchilla para grabado original ?

[@jeanspain8714]

I know you talked about taping yours on the top but I couldn’t tell which blade it was. I’m sorry I’m not that familiar with you tube...did you “link” the type of blade. I don’t know how to get to that

[@ElleBeeCreates]

There’s a description below all of my videos, you may have to click to expand it, that contains all the links for everything i use in my videos. I try to keep it quick and easy for everyone to be able to find what they need for the projects

[@jerrywhidby.]

I don't believe you linked to the tool holder that holds the etching pen.

[@ElleBeeCreates]

It comes with the Cameo 4

[@maryamalzaabi1363]

Hi dear, nice video, thank you. I have qyestion about blade cutting acrylic , can i use this blade on cameo 3 ??

[@ElleBeeCreates]

Yes you can

[@kristene.9245]

Just came across your video and was inspired to try it for myself with my cameo 4. Everything was going well except my blue attachment didn't fit around the chromas I got so I used it without as instructions also stated no attachments were needed but now my silhouette starts engraving in random spots on the mat and not at all where I am telling it to. Any suggestions? Awesome video!!

[@ElleBeeCreates]

Make sure you’re using the engraving tip made for the Cameo 4

[@My4Crazykids2010]

If you have the new chromas that doesn't fit the blue attachment, then when you put the tool in the machine don't push it all the way down. I just discovered (while having the same problem) that you can put that tool in and lock it in an different height, so lock it in a little higher instead of pushing it all the way down. It doesn't pop up and it fits over the acrylic.

[@samanthasiegenthaler6029]

@@My4Crazykids2010 Oh my gosh, thank you! I was about ready to throw everything out the window! Cant believe I didn't try to just lift it up a bit! Thanks!

[@debbiewilcox9697]

I am using the 2mm blanks and the same tool you used and I keep getting scratches when it goes from area to area. It even does it when it first starts.

[@ElleBeeCreates]

If you’re using the cameo 4 make sure you’re using the chomas tool made for the cameo 4

[@debbiewilcox9697]

@@ElleBeeCreates I'm using The Etching Tool: Engraving Tip for the Silhouette by Chomas Creations, Made in the USA - How do I know if it is the correct one for the Cameo 4? It's the one you used in the video.

[@debbiewilcox9697]

I ordered the one from your link.

[@alisonjanke1]

Do you know if the Cricut can etch like your first saw blade project where the tools were “filled in”? Sometimes it’s hard to see with just the outline. Thanks!

[@ElleBeeCreates]

Not that I know of. I was recently talking to a cricut friend of mine and she didn’t know of a way to do that.

[@josedelgadooficial6828]

Que cuchilla es o qué tipo de accesorio se uso para hacer ese grabado

[@NEXTDIRECTIONSTUDIOS]

just wondering if you could do this with portrait 3?

[@ElleBeeCreates]

I’m pretty sure you could!

[@emmalou2611]

Very helpful video thank you. But i just cant get it to work right. Keeps cutting off centre ie far to much to the left

[@anamaswari1641]

Omg I’m having the same problem too!!!

[@My4Crazykids2010]

@@anamaswari1641 Same problem here =(

[@codiecapper9711]

With the engraving tool? Do I need to purchase anything else with it or will it just go straight into my cameo 4,

[@ElleBeeCreates]

As long as you have your adaptors that came with your cameo you should be good

[@codiecapper9711]

@@ElleBeeCreates oh so the normal adaptors awesome I have them :)

[@shortlandstreetfan]

Would the new Etch Quill blade work the same way in a Cameo 3 d'you reckon? Wonderful tutorial! Cheers! X

[@ElleBeeCreates]

The chromas etching blade? It works great in a Cameo 3 but the acrylics won’t fit under the rollers of a C3. If you can find thinner acrylics that fit, then you’ll be able to use them in the C3

[@shortlandstreetfan]

@@ElleBeeCreates Cheers, but I have the new We R Memory Keepers Etch Quill and smaller acrylic blanks that I ordered. I do not have the Chomas blade. The etch quill is an etching blade. Do you think if I follow what you did with your blade and Cameo 4 that I might get close to the same results? I know it is hard for you to say, but just really wanted some encouragement in a way to try it. I did try once when I first got the etch quill, but the etching is so light I thought I may be doing summat wrong. Thank you so much for your answer. I really am not trying to put you on the spot. You were just such a great teacher I just would appreciate your opinion. Have a very Blessed and Magical day. petal! X

[@ElleBeeCreates]

I’m sorry I misunderstood. If the etching was too light I would try increasing your pass number to 2 or 3. After it finishes, before unloading your mat, see if the etching is deep enough and if not send it thru for one more pass. I haven’t seen the WRMK plastic sheets in person so I’m not sure how many passes you can do without compromising the integrity of the acrylic, but I say it’s worth a shot! Please let me know how it goes.

[@shortlandstreetfan]

@@ElleBeeCreates I will, petal! Thank you so much for your kindness and generosity with your time! X

[@Merobyte]

@@shortlandstreetfan by any chance did you get to try your etch quill on these products yet? Really would like to use them

[@wendygagnon8741]

Can't seem to go to the link for acrylic pieces..

[@ElleBeeCreates]

Thank you for letting me know! I’ve corrected the links.

[@davethreesixty2539]

hi what is the thickness of your acrylic panel?

[@jessbroadhead5956]

This was very informative, however I've played around with my new blade and 3 mm acrylic and my blade keeps hitting the side of the acrylic and etching my mat. 😢 Any ideas on how I can fix this?

[@ElleBeeCreates]

Wrap a piece of electrical tape around the notch so that it sits higher in the adaptor

[@debbiewilcox9697]

@@ElleBeeCreates This happen to me and I was using too thick of acrylic

[@yoli1202]

How do you avoid scratch marks across your project?

[@AlexBlooms]

What blade did you use?

[@ElleBeeCreates]

The Chomas etching blade. amzn.to/3ZXZw0U

[@StratosApostolou]

Thank you for this tutorial. 2mm acrylic blanks is the maximum thickness for cameo 4?

[@ElleBeeCreates]

It’s the thickest I’ve tried. Something thicker may fit but I personally wouldn’t recommend it.

[@StratosApostolou]

@@ElleBeeCreates Thank you I will follow your recommendation.

[@kattiaesixx]

What is the blade you used? Can I use a ratchet or deep cut?

[@ElleBeeCreates]

It’s an engraving tip, there’s a link in the video description

[@kattiaesixx]

@@ElleBeeCreates ty just bought it from the link thank you for such a great video

[@lovingmother3915]

She sounds like Ellen 🤗

[@savannahcrosswalk4619]

Can you do this with the cameo 3??

[@ElleBeeCreates]

Yes just make sure you get the right chomas tool

[@jeanspain8714]

Is there an etching tool that can be used with the Curio and the Cameo 4?

[@ElleBeeCreates]

Yes, chomas makes one for the cameo 4

[@ElleBeeCreates]

The standard chomas linked in the video description will work in the cameo 4 and the curio

[@laurakissinger7711]

I'm having a hard time getting aligned. I have the correct placement on screen and load the mat like I am supposed to and it just isn't exactly where it should be. I am not sure what to try.

[@ElleBeeCreates]

I would test with paper and a sketch pen or marker in place of the blade while you test. Also run a calibration.

[@laurakissinger7711]

@@ElleBeeCreates I figured out that my rollers were moved from using vinyl without a mat. Have some issues with keeping the etching tool from moving in the holder even with the tape but having some success finally.

[@anamaswari1641]

I’m having the same issues! I can’t get them to aligned when it’s engraving. But it’s the correct placement as it was on the Silhouette software screen.

[@laurakissinger7711]

@@anamaswari1641 I updated my software and did a firmware update and that fixed the issue.

[@kattiaesixx]

Order the blade on the link from Amazon it doesn't fit the 1 housing is too big...

[@ElleBeeCreates]

Mine fits. I would reach out to the company

[@kattiaesixx]

@@ElleBeeCreates thank you for your dedication and response time

[@user-oe9xp4jd6o]

How did you cut the acrylic with the same machine?

[@ElleBeeCreates]

I don’t cut the acrylic with the cameo, the link to buy it precut is in the video description

[@user-oe9xp4jd6o]

@@ElleBeeCreates How can I cut acrylic What is the name of the machine that cuts?

[@ElleBeeCreates]

@@user-oe9xp4jd6o you would need a laser to cut acrylic.

[@janesfavsvideos]

👍

[@mandyunger3878]

Can I do it on cameo 3?

[@ElleBeeCreates]

Yes

[@mariamazzone7014]

Si può fare anche con portrait

[@ElleBeeCreates]

Yes of course. Anything that can be done on a cameo can be done on a portrait, it just isn’t as wide so the size constraints are smaller.

[@Amocreardesigns]

What blade do I use

[@ElleBeeCreates]

There’s a link in the video description

[@cassiejo0012]

If I'm not mistaken that's engraving, etching involves chemicals

[@ElleBeeCreates]

Engraving is a deep cut, where as etching only removes the top layers. Yes, you can etch with chemicals, but you can also etch with tools and lasers.

[@davelamb2094]

are you sure thats a cameo four as my cameo 4 lights up. "silhouette cameo" not cameo on its own

[@TheStructuredChaos]

Dave Lamb the shape is distinct tot he cameo 4. Mine glows the same.

[@janesfavsvideos]

😍😍😍😍🤩🤩🤩🤩

[@chanellarsen5619]

doesnt matter what I do my engraver smacks against the edge of my acrylic .

[@ElleBeeCreates]

What thickness acrylic are you using?

[@jessbroadhead5956]

Hi, I'm having the same issue, did you find a solution?