LED Moving Head PAR Light Review, how to set up 4 together, RGBW Rotating Light DMX Sound activated

[@bigdaddy436]

Hey just got of these and just wondering can you disable the strobe and just use colors and if so how thanks

[@e11world]

Great video! Thank you very much! How do you compare this to the American DJ Inno Pocket Spot LED? Better quality light? Long term quality? Anything else?

[@rayrz]

is there a possible way to dim those lights without a DMX controller? Sometimes the light is really fell. maybe you can ajust this in the menu? i can't figor it out.

[@The_Master_Brain]

DMX and XLR Cables have different structures. XLR Cables bring problems while transporting DMX Information-Data. A certified DMX-Cable has 110 or 120Ohm.. an XLR-Cable has dynamic Ohms and is not made for DMX-Signals.

[@mirelaadams533]

I like this lights but i dont have them and i want to buy. I have 4 fos iridium beam 75 and 2 beamz panther 25 and im great and i use them with dmx but i want some wash

[@РусланДавлетханов-ч5к]

Lewis Dorothy Smith Jennifer Martinez Laura

[@tommydanger60]

Having trouble finding ATA or soft bags to transport 4 lights, any leads?

[@djkingin111]

My led mini moving head light is not working properly. It only blink blue colour . Any idea to fixed it

[@expertisland]

check the setting and make sure the flash mode is set to 0 ( f000 ) that could fix the blinking.

[@DJActionVasquez]

This is the second product I've seen on your channel that I like. At this price range, I'm seriously thinking about getting these lights. They're a great choice for the budget-friendly dj.

[@caseybrady4571]

you probably dont care but if you guys are stoned like me atm you can watch pretty much all of the latest series on Instaflixxer. Have been binge watching with my gf for the last days xD

[@dennisbrantley5108]

@Casey Brady yup, I've been watching on Instaflixxer for since november myself :D

[@dmc523]

Great video thanks! Love the adult movie soundtrack at the end. What do you think if I only use two of these for a small set-up? Will it still have the same effect IYO?

[@expertisland]

2 is a good place to start, you will probably add 2 more later on. to build on the show.

[@lukewyn-harris5628]

expert island but you say buy them all now?

[@lrfisher2002]

I use two on my dj table facing out to the crowd. Its fine with 2. I may add more later. These are a great buy.

[@vesnakofficial8170]

sir i request this mini moving head controlled in dmx

[@vesnakofficial8170]

plz read my comment greeting from malaysia

[@bobbattiste980]

Which one is the master? The first one on the right or left?

[@Backstage2024]

How much for (8) and we’re can I order?

[@briansaber4163]

Is there a way to turn them on sound activation and do a funky show for a few minutes in the open of a show but then turn to spot lights in a certain postion the rest if the show not moving

[@expertisland]

You need to get a basic DMX controller with sound activation adj has one you program it at home saved and play back the seeds. Program 2 or 3 for your show with music and a 2nd with fixed positions......

[@hardhouseheavenhostedbydjs9138]

ive just got this but the instructions arent very good. I notice you had the light on still purple flashing is it possible to message me how you did that?

[@danielstartek9729]

I am the tour manager for Metallic. We would like you to be the LD on our next tour. First date: January 20th in Japan. Please confirm ASAP.

[@richienorthcott]

Hmmm I should have watched this video. I bought 4 of these in two sets (so two orders of two). They came from the same supplier, have the same model number even, but they behave quite differently over DMX. Super frustrating! The orders were only a few weeks apart.

[@bgholiday9462]

Thanks for the video! Just to confirm, you just daisy chained these together using dmx cables and relied on the computers built into the lights? No dmx programming or controllers?

[@GoodDeposit]

Hi Are these still available? The Amazon link in the UK takes me to some moving heads with gobo's. I want movers that can be restricted to 180degree turns like the ones in this video.

[@vancewalker7045]

Hi. Great video- thanks! The link in the US takes us to another product. Speaking with the expert island store, apparently the link is out of their control- amazon or the US rep changed the link.

[@tigger3493]

Hi how can i set these to be static facing down without DMX

[@5thElementDFW]

Turn off sound active mode and adjust the pan and tilt to desired position

[@SeekinsBlues]

Is it possible to configure these for out-of-phase? Meaning that there is a slight delay in movement for each light in a master/slave setup?

[@cvpvlastudio]

Is there any way to make the fans stop that awful sound?? Thanks!

[@expertisland]

There are 4 screws around the fan on the bottom of the light turn the screws half turn to see if it calms the sound. note this is for fans that a buzzing or humming.

[@alexfaylona4007]

You mentioned remote control? U have link of the remote control?

[@TxrdcoastTexas]

How can i get my uplights on channel 3 or 7 to operate with these

[@djcory2727]

Do you still recommend these movers in 2020?

[@expertisland]

I just replied to your Question in my latest Q&A Video here is the link kzbin.info/www/bejne/bnXKaXRtn8tqpLs

[@zicofitzgerald9015]

Can i have it in master slave and then have it in Sound active at the same time?

[@knerr]

Thanks for the demo! What strategy of addressing would you take to combine DMX use for static scenes, as well as auto programs and sound active mode for effects during a show. This would be for a band, so I don't want them flashing the whole time. Thanks!!

[@kenklassen9577]

Very well presented.. Thank you...!!!

[@kevinchand8359]

Why do you have to daisy chain them in sound activation mode?

[@expertisland]

Hello! Robin here Just letting you know I replied to your Question in my Latest Q&A here is the link kzbin.info/www/bejne/rXzIZX9vdsR_rsU

[@expertisland]

Right on the mark, thanks for the reply.

[@CYRRYANC97]

had 2 of these for 3 years. While one of them does have some issues when it first boots up they still work great. Started to DMX them since they stob alot when the music is loud. .

[@cjmash99]

how would i make it hold one position with one light setting?

[@jakecollins5247]

these are not pars just so we are clear

[@alexcuran3069]

Where is the store which city

[@gibsoadstudios648]

Sweet. Do you think this can be used for live situations. My band plays metal and we want to play with lights without using midi. So would the sound activation work for live?

[@BandWimaImara]

@Joshua Superneau I think the live band set up he means is that they're not having anything like click tracks. So must these lights be used with playback music or computer softwares connected to them in a love set up for them to kinda synchronise?

[@fiddlejobs]

This is a great video we love it

[@kaybhee6]

keen

[@toriwori84]

Can you use one on its own

[@isaacmejia9856]

Quick question. Do these lights remember the changes you’ve made once you turn them off, or do you have to make the changes every time you turn them on?

[@expertisland]

If you're pushing the enter button the lights will store the changes for next time no problem.

[@isaacmejia9856]

expert island Thank you

[@darrengerman5761]

Pile of junk, only buy them all together is just an excuse to cover your poorly built lights!!! Stick to the main brands folks,