LED Rear Bumper Light Install | 2014 - 2019 Mazda 6 | Modified 2014 Mazda 6

In this episode, we will go over installing and wiring up the LED Rear Bumper Lights. Not a hard modification to perform but the rear bumper has to be removed to make access easier. The lights adds function to the bumper and still looks oem-ish.
Rear Bumper Removal Video: • Removing the Rear Bump...
The wiring colors I can only confirm for the 2014 Mazda 6 Grand Touring.
Do this modification at your own risk and at the risk of doing damage to said vehicle.
LED Rear Bumper Lights (US Seller): ebay.us/KBYDYX
LED Rear Bumper Light Wire color functions:
Black: Ground
White: DRL
Red: Brake / Turn Signal
People always ask, so here is the link to the DuckBill Spoiler: ebay.us/TvKfm0
---
#AmazonAffiliate​​​​​​​​​
Equipment List:
Go-Pro Head Mount: amzn.to/3jcagFt
DJI Osmo Action: amzn.to/3jFHb3...
DJI Osmo Action Mic Adapter: amzn.to/3jHNHX...
DJI Osmo Action Cage: amzn.to/3rM0Od...
Andoer Mini Tripod: amzn.to/3aUUJn...
Rode VideoMic Go: amzn.to/2Sk3kr...
Sony ECM-DS70P Mic: amzn.to/3pXR66...
---
Do you Drive Your Car Everyday like I do?
If so, visit my Sponsor Daily Driver, Inc for Banners, Merch and More to rep that Daily Driver Status. Visit dailydriversin...
---
Need an Aftermarket Spoiler for your Roof or Trunk that is Made up of High Quality Polyurethane Material and is Custom Fitted to Your Vehicle and is Manufactured AND Packaged in the good ole US of A??
If so, visit my Sponsor SpoilerKing at www.spoilerkin...

[@trywarez]

Thank you for updating us through the Mazda 6 forum. 😀

[@DariusBuildz]

Anytime! I try my best to remember! Thank you for watching!

[@Pakitullanc]

Darius, two things; One, can this lights be replaced without pull the bumper off? Two, I saw you have the front bumper drl's as well. You have a video on that and did you get it from State side? TIA

[@DariusBuildz]

I don’t think you can get to the bumper lights with it on. You maybe can, but I can see it taking 4x as long doing it that way. And yes, I have a video of the front drl’s: kzbin.info/www/bejne/aqKppoRopsp9qNEsi=M_olAbTxf1ST7y11 I got mine from a friend and are iJDM, but Amazon and eBay has them as well. I have links in the video description

[@aniruddhajog]

Hello ! thanks for this video, I was wanting to fit these lights to match the front daylight running lights because I feel the daylight running lights should work in the front and the rear I checked when the front daylight working lights are ON the rear tail lights don't work, hence this install, don't know how to run the wires for these rear bumper lights to work with the front daylight running lights, your help is welcome!!

[@DariusBuildz]

The easy way to run these as a drl is to run the headlight switch on “On”. The next way would be to run them to a 13v switch, so they would turn on when the car is started. I am not sure if there is any good source in the trunk to make running that easier. Otherwise, you would have to run it to the run box in the kick panel to a 12v switched source or under the hood to a 12v switch source, such as the radio fuse.

[@aniruddhajog]

@@DariusBuildz thanks I was looking at the fuses in the engine and my car is a 2020 model so as per the fuse box listing no. 52 is id'ed as assessory socket I was thinking of running the wires from there..however since front drls turn on the moment the car is in motion I wanted to identify the drl wiring to use rear bumper leds in the same circuit, but I am concerned if I mess up it will brick the whole system😕

[@townsyy_]

so I got a 2004 mazda 3 I have no clue how to wire these reflectors led lights.

[@DariusBuildz]

I grounded the wire for the lights and tried each slot on the socket until I got the function that I wanted and made a note which went to what. That's how I figured mine out

[@Exotic_Only]

is there a link for this? I have a 2019 Mazda 6 sport

[@DariusBuildz]

Link should be in the description to a eBay listing.