Bottom drains do you need one?

[@neodiy]

This video contains high level of knowledge but less views...i dont understand why people always ignore good knowledge like this

[@davidharrison7944]

'FEWER' views.

[@KoiCarpKyle2393]

Great content I been finding it hard to get my head around a bottom drain but after watching this iv got a better idea 👍

[@MrSmithy63]

With hindsight i would have put in a bottom drain when i built my pond , but to be fair my pump fed system work fine , bottom of pond is super clean but i have to use pond vac regularly , I agree though that bottom drain is the way to go

[@leecalladine]

Bottom drain is not essential. But it makes a lot of sense.

[@wimdebie6584]

Hi Lee, Belgian fan here.. Great videos btw, love them all.. So if I understand it correctly, for every 2000 gallons (10000 liters) of pond, you should put in a bottom drain? Thx in advance Greetings from the continent.. Wim

[@leecalladine]

Yes that's a good plan .

[@angelorabor7922]

Thanks for sharing your ideas😄

[@rubymappin4056]

Great video lee

[@mikhailabiodun5393]

Educative video

[@abstractkoi9088]

Great video! Very inspireing!

[@leecalladine]

Glad you liked it hope it inspires a few pond builders out there.

[@abstractkoi9088]

Lee Calladine you defenetly inspire me!

[@renniandrenee]

Hi lee brilliant video, I’ve installed a bottom drain in foundation. If my filter is higher than the water level what are my options to make it work?

[@leecalladine]

You would have to install a settlement tank or vortex. Then pump up to the filter. Or as an absolute last resort connect a pump directly to the bottom drain. However this is far from ideal.

[@shaunleonard8146]

Thankyou Lee

[@RamseysDIYKoiPond]

Hi lee Great video again fella... one question i have though is.... is it safe to use a bottom drain on a lpdm/pvc liner? Thanks Lee

[@leecalladine]

Pvc liner no problem. Rubber better liner choice though.

[@CBersPond]

Another great video. I've just retro-fitted a bottom drain (video on my channel) and it's working really well. Just wished I'd done a proper bottom drain originally. How's the quarantine build coming?

[@MJSIGNvinyls]

Hi Lee, I’m hoping you can help. I’m wanting to run either 1 or two totally separate bioforce 9000 evolutions,but, connect them separately down the bottom 110 drain and use a pump (should I say 2) to force feed to the bioforce rather than the submersible ones they come with. Do you see a problem with doing this please? I think would give extra ‘pull’ through the drain, and also shut one off for a full clean without stopping filtration on the pump. And…. I already have 2 which I have found brilliant over the years with only an annual clean required and very little mess.

[@leecalladine]

I am not familiar with the filters you mentioned. Are they designed to be connected pump fed? Are you pumping directly from the bottom drains?

[@MJSIGNvinyls]

@@leecalladine they are meant to be force fed from a submersed pump sat on the bottom of the pond, I raised mine so it could never pump the pond dry. Hozelock Bioforce evolution they are called twist a handle to agitate the foam and divert through a valve to waste. Then strip down and clean once a year when I replace the UV bulb.

[@leecalladine]

It is not ideal connecting the pump direct to the bottom drain. You can easily damage the pump or have issues with blockages. It would work considerably better if you connected the drains into a settlement tank then pumped the water of the top this allowing the settlement tank to filter out large heavy solids such as gravel etc.

[@MJSIGNvinyls]

@@leecalladine thanks Lee, I’m limited for space for a large settlement tank as the pump is quite powerful. Looks like I’ll have to find more space. Thanks for the advice, keep up the video’s, been super interesting, even the ones I didn’t log on to watch…. 🤪 many thanks again

[@steviesmith2451]

hi Lee what do you think about under gravel suction grids, i'm in 2 minds whether to fit it on my next pond,btw I used your pergoda design when you make that video so thanks for that

[@leecalladine]

Not sure what you mean by suction grids. If you mean like a large version of an aquarium filter under gravel. Then they will get full of sediment and you struggle to get it out. You could run it in reverse possibly with clean water pump backwards up through it?

[@steviesmith2451]

@@leecalladine yeah kinda, solvent weld 2" pipe made into a large grid with small holes drilled into it about a foot apart and placed into the bottom of the pond and covered with 10mm gravel and connected to an external pump, something like this one www.pondtrademag.com/so-you-still-want-a-crystal-clear-pond-revisiting-undergravel-filtration/

[@Tom_Prendiville]

If you are building a new pond I'd just go with the tried and tested method of gravity feed filters through bottom drains as all other methods especially sand and gravel filters just hold on to the waste and in effect cause the tea bag effect, filtration is the removal of debris so why would you want to trap it inside something you cant see also when you do backwash it is it actually clean......no way to tell....and if it fails it causes much more serious problems like bacterial issues. Do it once do it right, buy cheap buy twice is my stance. Goodluck

[@leecalladine]

@@steviesmith2451 A system like the one in the link is very efficient biologically but it will be a devil to clean when it eventually needs to be cleaned and it will need to be cleaned at some point. If you could mechanically filter the water then pump clean water in reverse it can work well. Solids are the enemy of filtration.

[@leecalladine]

@@Tom_Prendiville Wise words. I agree entirely.

[@MartinFishfarm]

Can you use this method 2 different ponds?but have the same drainage?

[@leecalladine]

Definitely can link multiple ponds with drains to one filter. Must make sure each can be flushed separate.

[@leecalladine]

kzbin.info/www/bejne/nIHdloumiLpld5Y

[@leecalladine]

We did this when we built our quarantine. Whole series of videos on it see link.

[@MartinFishfarm]

Thank you this is exactly what my pond looks like 4 ponds 1 drainage but I didn't see in the video the drainage system I'll look for the other parts of your video thank you sir watching from philippines!

[@guanchybinkobinko4572]

What will be the rate of flow of the bottom drain? What would be the size of the bottom drain pipes relative to the size of the pond? Thank you!

[@leecalladine]

4 inch / 110mm flow rate up to 2,000 gallon.

[@guanchybinkobinko4572]

Lee Calladine thank you so much!!!

[@kkyogish]

@@leecalladine how do one assume the flow rate is 2000 gallons when the dept of the pond or volume of pond is not declared.

[@leecalladine]

@@kkyogish tej flow rate can be anything upto about 2,000 gallons. Could also use 3in drain if you only need flow upto about 1200 gallons per hour.

[@carlivanbinondo2711]

hello sir Lee ! is there any rule how big the sump system should be currently planning on a 16 x 7 x 4 build gonna do 2 pcs 4 Inch Bottom Drain but my sump space could be in the smaller end and im confused

[@leecalladine]

Make the filter as large as possible.

[@BettySwollocks13]

If I scuff the bottom drain up, will the GRP stick better?

[@leecalladine]

Yep

[@billysmith7119]

Can you tell me what sort of pump i would need please

[@roycarperdaniels7948]

What bottom drain would you reccomend for 2.592 liter pond

[@leecalladine]

The only only size that makes sense is a 110mm\4" drain. Not going to block with leaves and easy to locate. You might decide to reduce it to 82mm to up the water velocity but don't go any smaller!

[@juniorlovell2833]

What about the retro fit bottom drains like the ones from rhino they even come with air stones built into them 😉

[@leecalladine]

Messy. Best installed from the beginning.

[@kkyogish]

What is the minimum depth of the pond for water to move through the filters

[@leecalladine]

I don't quite understand. But there is no minimum depth.

[@kkyogish]

@@leecalladine lower the potential energy of water lower will be flow rate. The pump added to return the filtered water back to pond will run dry most of the time. Hence the basic question

[@mikhailabiodun5393]

What is the right size of pipe for efficient bottom drain?

[@leecalladine]

4in or 3in. Never ever smaller.

[@David808Hi]

A bottom drain sound good but I’m worried about something going wrong and all the water draining

[@leecalladine]

If it's done properly that is practically impossible.

[@goodbad59]

Video title asks do you need one? Simple answer is no you don’t. You might want one but it isn’t necessary.