Finally a video that explains the details, excellent, thanks for sharing
@LegendSuspensions9 ай бұрын
Glad it was helpful! Thanks for the feedback.
@tjtuck45202 жыл бұрын
COUNT THE THREADS. it's the foolproof way to make sure they are even.
@LegendSuspensions2 жыл бұрын
That is a great way to doublecheck.
@1022wade4 ай бұрын
Exactly. Thanks for sharing.
@kennethwise7108 Жыл бұрын
Installed mine today on my 1998 Road Glide and love them! HUGE difference... Funny how the fitment was for 1999-2023. If I were you guys I'd try to nail down a better fitment guide as you're losing out on a lot of potential customers. Luckily for me I knew they'd fit because my swingarm came off of a 1999. There is no difference with the exception of some tab for the caliper.
@LegendSuspensions Жыл бұрын
Kenneth, Thank you for your business and support. We appreciate the comment.
@finder2163 ай бұрын
Just put a set of these on my 2017 Ultra Limited...this video is PERFECT - Thanks!
@LegendSuspensions3 ай бұрын
Thank you for your business we truly appreciate it. We are glad the video was helpful.
@denniswheeler1257Ай бұрын
Love the shocks. The idea of just turning the spring to adjust for two up is simple but I hate the arm workout it takes pto turn them.
@LegendSuspensions24 күн бұрын
Hey there, we would recommend lubricating the threads on the shocks if you are finding them hard to turn. any silicone-based lubrication should do the trick, we use WD-40 specialist series with PTFE in it and it makes them buttery to turn them. Lubricating shocks is one of the only basic maintenances we recommend as you can pick up things like dust and road grime and if they get in the threads, it can make them harder to turn. so, keep them clean and it will help the shocks and seals last longer.
@mustangx2 жыл бұрын
I just installed my 13” shock and had 1/2 inch of sag. After watching this vid I’m not worried to give the shock a few more turns. Thank you Installation was so easy…I’m “shocked” lol
@MotorHead9634 жыл бұрын
cool video guys, I got 1" sag on my 13 shocks but I need to make it way softer for streets here in Chicago area.... we got craters on the roads, entire motorcycle jumps .... soon ill have to install dirt bike suspension on my street glide hehe cheers brothers
@onOnewheel_jay Жыл бұрын
turn counter clock
@Thebwaller07 Жыл бұрын
I have legend suspension front and back on a RG and two RK’s. Went to there shop and met these guys at Sturgis. Customer service is awesome. All my bikes run amazing. Thanks guys!!!!!!
@LegendSuspensions Жыл бұрын
@jimhighfill Sincere thank you for your business and continued patronage to Legend Suspensions! We truly appreciate you supporting American made. Come by and see us at our HQ in Sturgis or Black Hills HD this year! Ride Safe.
@1022wade4 ай бұрын
Great video. Just installed my revo a on the 2022 road glide. Was a little concerned just wasn’t as soft as I wanted it even though I’m 210ish. Tuned them clockwise 4 times and set the rebound to 2 and rides like a 1979 Lincoln Town Car, that’s a good thing to be clear. Thing is like riding on air.
@LegendSuspensions4 ай бұрын
AWESOME!!! good job dialing your shocks in. Thank you for the feedback.
@upforaride6925 Жыл бұрын
thanks for the vid - i cranked a few turns into the rear shocks and made a positive difference - love it!
@LegendSuspensions Жыл бұрын
Glad it helped!
@dancheatham51064 жыл бұрын
Perfect explanation. got mine today, now it looks super simple as far as adjustments. Hooking them up tomorrow Fri and riding saturday after testing Friday. sure hope they are what I paid for!!!
@jessejones8539 Жыл бұрын
Well? Were they worth it?
@dancheatham5106 Жыл бұрын
@jessejones8539 heck yes, night and day difference. No more bottoming out on big swoopy parts of freeway I always had too brace for! Now I need the fronts done.
@jessejones8539 Жыл бұрын
@@dancheatham5106 awesome! Great to hear - got me a quote today ;)
@chasecejka36724 жыл бұрын
Would love to see a video going over the piggy back model adjustments. Keep up the good work.
@russellsowers60694 жыл бұрын
Guys. Love these vids! You helped me choose the regular 13” Revo’s for my SG. Love them. This vid verified I put them on right! Sad because I liked the front but your rears shows me how bad they are. So the front will be going in for Christmas if Santa is good to me. Anyway I would love to see more selection with the merch. Some ba hats and such.
@Chrisbea3981 Жыл бұрын
I wish somebody would invent a tool so a single person can do this easily. Something that you mount on the top bolt and when you sit it pushes up an arrow to show you how much sag and you can adjust and retest
@LegendSuspensions Жыл бұрын
Hey Chris- For your suspension sag, what we would recommend is stopping by a shop and having your suspension sag adjusted for the different configurations you need, like solo, solo with gear, passenger or passenger with gear. You can make a marking on the shock threads with a paint marker so it doesn't wash off, but this can be used as a reference guide for exactly where you need to adjust those spring to without having to measure. We also recommend setting sag and then measure the number of exposed threads on the bottom of the shock for each application or the distance those exposed threads are, once you set sag and get the measurement you know that's where the shocks need to be, just documented it on a small piece of paper and keep it in your saddlebag. You can then solo adjust till you hit those measured numbers and will not need anyone else to help make adjustments. For instance, if you sit on the bike and your suspension sag is set perfect, you measure that you have 1" of threads showing, then set the suspension for 2-up and you have 1-1/2" of threads showing, it is easy to go between them for adjustments by twisting the spring and make sure you are at your correct exposed thread length. We hope this helps.
@Chrisbea3981 Жыл бұрын
@@LegendSuspensions thank you for the quick detailed reply
@LegendSuspensions Жыл бұрын
@Chris Beam Absolutely no problem. We are always happy to help.
@heritageroadleather9992 жыл бұрын
I hope to get a pair of the Revo-As for my RK Special one day👊🏻👊🏻. Keep up the great work 🇺🇸🇺🇸
@LegendSuspensions2 жыл бұрын
Right on! Let us know when you are ready to get your RK Special dialed!
@razosfxdsuperglide23163 ай бұрын
Are both riders supposed to be on the motorcycle when setting the sag on 13" Heavy Duty Revo A's for two up ? On my 2010 FXD Dyna Super Glide. Can't wait to place an order ASAP from @2laneLife. Also wanted to mention, The OrneryOne TJ and his wife are awesome. Great Video.
@LegendSuspensions3 ай бұрын
Hello, For the most accurate setting of sag, we do recommend you both be on the bike with whatever gear you tend to ride with and in your normal riding gear. This will give an accurate weight to go off. From the normal 13" length you want the shocks to measure right about 12-1/4" to 12" with you both on the bike stated above. This will tell the suspension how much weight you added and to use all the travel and keep you from bottoming out. From there you simply select a rebound setting you like most (we recommend trying them all) and boom you're good to go. If you do not know where to start with rebound, we recommend starting with setting (3) on both shocks. Then go straight to (6) and then straight to (1) this will show you what is actually changing and will help you in selecting what ride you like best. IF you have ANY questions at all we recommend emailing service@legendsuspensions.com and our techs can help. We agree, 2Lane and the Ornery Crew are all Aces!
@mikezagorski6327 Жыл бұрын
Very good video. Still not sure which shocks I should get. Thanks 8:45
@LegendSuspensions Жыл бұрын
Hello @mikezagorski6327, Choosing the right shocks for you can be a little challenging and we totally understand wanting to make sure you spend money right the first time. That is something everyone can agree on. We would be more than happy to answer any questions you might have or walk you through any details or differences between shocks to help you narrow down the options to what you want and need for your application. We have a chat feature with real techs the chat feature is on the bottom right-hand corner at legendsuspensions.com. You can also email service@legendsuspensions.com as well with any questions, or even a request for a phone call and we will give you a call to get you helped out. Our shocks have a lot of features built in to ensure you always have the right shock for you, from length conversions to spring swaps. They are even biker transferable in most cases. Thank you.
@mickeygaines007 Жыл бұрын
If you have $2000 to spend and really want to lower the bike more on the fly, go with the high-end air ones. As far as which length, with shocks size does matter. If you are like me with a very short inseam and need to get lower, go with 12 inch. Otherwise stay with 13 or 14. With the 13 adjusted for sag, you will sit about the same height as stock on a touring bike and the extra travel will make for a better ride. The regular Revos are probably going to be fine for most riders in most cases but if you want to spend another $150 and be able to dial in the rebound also you can go with the Revo A. Just gives you a few more keys on the piano. Hope this helped a bit! Go with 13 or even 14 if you can plant and be comfortable and have the inseam for it!
@THEBIGCHULETA4 ай бұрын
Great video! I feel like I learned something today.😁
@LegendSuspensions4 ай бұрын
Awesome! Thank you!
@dwightraine96864 жыл бұрын
Excellent well done video I enjoyed it I have these Revo a shocks on my 2019 CVO RG., i’m very happy with them. They’re excellent shocks. I plan on visiting you in Sturgis and having a front in done.
@rohitnarayan3966 Жыл бұрын
Thanks great video, this will help setting up my shocks
@LegendSuspensions Жыл бұрын
Awesome! glad to hear it. If you find yourself with more questions, please check out our live chat at legendsuspensions.com or email service@legendsuspensions.com
@emilianozapata5308 Жыл бұрын
Well done very easy to understand. Thank you.
@LegendSuspensions Жыл бұрын
Glad it was helpful!
@gwattsjr4 жыл бұрын
Another great video guys! Can’t wait to get my REVO ARC setup installed.
@10374doc Жыл бұрын
This was a great video...just what I needed to properly set me sag!
@LegendSuspensions Жыл бұрын
Doc B, Great! we are glad it was helpful. Thank you for your business and supporting USA Made. Happy riding.
@johnchargualaf65992 жыл бұрын
Awesome video, So I went off a recommendation of a buddy who had 12” Revo A install & legends front suspension -1 lowers we are pretty much the same weight & he swears the 12’s are great ride now that I watched your video maybe I should have went 13’s. Mine are getting installed today I hope I made a good choice?
@LegendSuspensions2 жыл бұрын
Hey John thanks for reaching out. The 12s are still a really good shock/ride. You will just have 2 inches of suspension travel instead of 3. Ride it and see what you think. If you are not liking it, send us an email to discuss a length conversion.
@nikostsabasis96513 ай бұрын
Hey man! I also want to put the 12” on my street glide! Did you put your? How is it?
@jamescox12246 ай бұрын
Finally someone explains it correctly and clearly!! Great job, you made it make sense to me now.. buying this exact suspension. Ima bigger guy 300lb occasionally riding 2 up… do you recommend heavy duty? On trips, I’m guessing I pack 100lbs of weight on the bike. But when I take long road trips, I’m solo not 2 up.. not sure if I really need HD or not..?
@LegendSuspensions6 ай бұрын
Hey there, Thanks for the comment. We are glad it is helpful. One thing important to note is if you chose standard or Heavy-Duty springs, we do offer spring swaps so you will never be stuck with something that does not work for you. There is kind of a middle ground you are in where you could really go either way. The standard really wouldn't be too soft for you and the HD spring really wouldn't be too firm. The HD spring will require less adjustment when you add that extra 100lbs for your trips. with the weight range you're in the HD spring would be very comfortable. We would say go this route. Set that suspension sag at to where you can sit on the bike in your riding gear and have someone measure your center bolt to center bolt and make that 12-1/4" so that when you add bags or a tour pack you are still within the 1" sag range, and you will be golden. If for some reason you wanted to down the road, you can always swap to the standard spring to try it. But we feel HD would be right for you, it will require less preload to hold you in the correct sag range and this gives a larger sweet spot for comfort. If you have any questions on this, please feel free to use our live chat on our website or email service@legendsuspensions.com We will be at Daytona Bike Week here later next week if you happen to be in FL, we can help you in person as well.
@jamescox12246 ай бұрын
Amazing explanation again!! Thanks again guys! Thanks for getting back to me on this… I will go with the HD set up, like y’all said.. makes the most sense. Had no idea I could swap out springs! That’s killer! Sounds like a great suspension. Was referred to you guys by Adam Sandouval. Rode with him on the great American convoy last summer 23’.. and he swears by legends suspension! Will be buying them soon!! Thanks again for all the info.. yall Fkn rock!! 🤘🏻
@LegendSuspensions6 ай бұрын
Awesome! we truly appreciate your business, our suspension is hand built in Sturgis, South Dakota and we pride ourselves on Customer Service. Our suspension also comes with a Lifetime Warranty. Thank you. And yes, Adam is ACES. We love having him around.
@Jimmy_Jim_Jim_12342 жыл бұрын
Just got my Revo A 13" this morning. Easy install. Ride is 100% better.
@rider14mcd632 жыл бұрын
Do you reset the sag when you ride with a passenger.?
@Jimmy_Jim_Jim_12342 жыл бұрын
@@rider14mcd63 I haven't had a passenger yet, but when i do i definatly will. Its super easy. Just turn the spring!
@TheChas524 жыл бұрын
Shane thanks for breaking down the dial settings!!
@gwhain34082 жыл бұрын
Great explanation! Best video on the topic for sure.
@jordie033 ай бұрын
Great video I just put a set of these Revo A’s on my 2019 Street glide. It helps a lot to understand adjustments. I do have one question though. In the instruction manual It says to torque hardware to 50 ft lbs. I’ve had people tell me to do Harley torque spec 63-70 ft lbs. which is best torque value for these shocks?
@LegendSuspensions3 ай бұрын
Thank you for your business. Great question. Stock Spec is 63-70 however, that is with stock solid mounted shocks that have bushings. Our shocks use spherical bearings at the mount points, and we include a billet aluminum spacer, we call out 50lbft of torque because if you torque them too tight you will press the inner race of the metal bearing into the spacer and cause it to dish and this can lock the shocks in place which is bad, you want our shocks to still pivot on the bearings after you install them, so they can move freely and prevent suspension binds cause by rigid mounted shocks. If you have any additional questions about this, please feel free to email service@legendsuspensions.com and we would be more than happy to help.
@seanwenchell10344 жыл бұрын
Thank you for the very informative video. I'm looking into getting your shocks for my 2020 Street Glide Special.
@jeffhern95504 жыл бұрын
Thanks for the video just put revo a & the axeo fronts on my street glide yesterday & trying to get the revos's set up correctly this helps a lot
@TheHighestGodisGood4 жыл бұрын
Subbed! Excited about your suspension!
@Method_MOK Жыл бұрын
Thanks for the tips! I am waiting on mine (Revo 13" HD) to arrive. I'm a REALLY big guy and will be pushing the weight limits for rider/cargo. When setting sag, is there a stop or some dimension I need to be aware of to avoid going past the limit of the product?
@LegendSuspensions Жыл бұрын
With the 13" HD spring you will want to set your sag, no matter the weight on the bike at no more than 1" of suspension sag. This is what is telling the shocks your weight range, to use all the travel and keep you from bottoming out. When you take bags off to set the sag, you will sit on the bike with gear or passenger. We recommend setting the sag slightly less than 1" that way when you install your bags you are not pushing the shocks outside of the 1" of suspension sag. If you need any further help, please feel free to email service@legendsuspensions.com. Thank you.
@charlescolarusso38014 жыл бұрын
Good explanation and direction on setting up the shocks. I've been looking at lowering my '06 Ultra (short rider) but don't want to change the pitch from front to rear. Maybe you can do content on lowering suspension front and rear and what might be a good combination of front inserts and rear shocks. I've only really seen content for front or rear.
@royalsales19072 жыл бұрын
Great explanation, thanks.
@jessereyez12154 жыл бұрын
Thanks Chase “and Legend Team””
@harleyquebecenrevue35802 жыл бұрын
Installed both front and backs on my FLHTK 2019. Absolutely love them but I really wish Legend would come up with a set up tool so you could adjust the ride height alone with no assistance from someone. I often go from single rider to adding a passenger which means I need a third person to measure. On occasion, i tow a trailer and again, I need a third person to measure. Also, some sort of marking on the shock so I know my original 1 rider setting or my 2 rider setting. It’s easy to lose track of what it was at. Two weeks ago, did I leave it at single rider or not. That has to be my ONLY negative about this product. Just truly enjoy the comfort ride they offer…. If I adjusted them right… again.. good grief !
@LegendSuspensions2 жыл бұрын
Hey thanks for reaching out. We are glad to hear you are loving the shocks. In the video Chase talks about how we use the Legend logo that is on the coil to reference how many turns we make. We recommend starting with a 2 up measurement. Once you get to the correct sag, have the passenger get off and then count many turns it takes to get to the correct sag for solo riding. Knowing how many turns you make will make it easier in the future and avoid having to measure again. Thanks and enjoy the ride.
@harleyquebecenrevue35802 жыл бұрын
@@LegendSuspensions yes, and I understand that process but if you rode two up last week with proper setting, today you may not be sure if you last set it up for 2 or 1 riders on your last ride. My point is there is no markings on the shocks to remind me if it’s set for 1 rider or two riders. White markings on the shocks would be of great help. Easier to remember where they need to be set, mark 1 or mark 2. How about a lock ring on the threads so once in position I know that this is my 1 rider setting. Then I can turn up say 2 turns from there for a passenger or 3 turns with luggage. Also, I’m sure you guys can come up with a measurement tool when alone to adjust. Consider, If we’re two and about to go for a ride, how do I measure the shocks for 2 riders? I need a third person to measure. It’s a real hassle. Anyways, just a suggestion. I love the shocks, I highly recommend them.
@tjtuck45202 жыл бұрын
@@harleyquebecenrevue3580 I have this problem also along with lots others I'm sure of it. I wonder if they put a rubber band around the piston of the shock. Wonder if that would measure the travel, kinda like how a mountain bike front forks are measured when adjusting 🤷♂️
@davedarling20084 жыл бұрын
Just got a set of Revo A's, as well as the Legends fork upgrade. Any idea how many turns when a passenger is added? Like, is there a certain amount of turns for each 25 pounds (150 pound passenger)?
@AM-ju9wx11 ай бұрын
I have 13" Revo-A's on my 2023 Road Glide ST and have them adjusted for 1 inch of sag and they are still stiff. I feel a hard bump all the way up through my back and still get lifted off of the seat.
@LegendSuspensions11 ай бұрын
Hey there, thank you for your business. Sorry to hear about the troubles you are having. We would recommend you reach out to our Customer Service/Tech Department because it definitely sounds like something either needs to be adjusted or something is maybe not correct. Those 13" shocks should be riding butter smooth for you. They may request pictures of the shocks mounted on the bike so they can put eyes on it as well. Please email service@legendsuspensions.com and they would be more than happy to get you squared away.
@makeshiftgrenades Жыл бұрын
Talk about informative !!!!!!!!! Yeah if your a 1st grader
@LegendSuspensions Жыл бұрын
Thank you for the feedback. We are glad the video was helpful.
@HOOLIGANfilmz2 жыл бұрын
Great stuff!
@AngelTorres-se9zf7 ай бұрын
Will Legends be in Daytona for bike week this March 2024? If so are you guys doing installs?
@LegendSuspensions7 ай бұрын
Yes, we sure will, and yes, we sure will!! Come see us at the vendor lot at Teddy Morse's HD. We will be unmissable. We look forward to your stopping by.
@AngelTorres-se9zf7 ай бұрын
Just got the ok from the wife, so I am looking forward to seeing you guys there😊
@LegendSuspensions7 ай бұрын
Awesome!! You are going to love it.
@stevec8836 Жыл бұрын
Great video ! Thorough explanation ! Will be ordering them today at my Harley dealer Not a big deal but can you access the rebound dial with the stretched bags on the bike on a SG Special or do you have to remove bags ?
@LegendSuspensions Жыл бұрын
Steve C, Thanks for the questions. In most case you still can, but there may be variants of bags that make this more difficult. However, in most cases when adjusting the rebound you generally do not need to completely remove the bag, you can just unclip them and lean the bag on your leg to create space to reach down and make your quick adjustment. Thank you kindly for your business and supporting American made products. Please feel free to use our website live chat feature or email service@legendsuspensions.com with any additional questions and we would be more than happy to help.
@JACKIEMONSOON4 жыл бұрын
Great demo
@lionelkershaw796 Жыл бұрын
Nice shocks
@LegendSuspensions Жыл бұрын
Thank you for the kind words.
@jeffuda36389 ай бұрын
I just put on the 13 inch heavy duty revo A on my 2021 SG. I love these shocks it between night and day! My only concern is why is it made upright instead of downright as we all know grit loves finding a new home sitting around the shaft seal. Do you all have shock outerwear or have you put any thoughts to help protect these fine gems? Not a sermon just a thought. Keep up with the excellent work! A friend highly recommended it to me and i have been telling my friends that i highly recommend them also! If you have outerwear I'll be gladly to purchase it to protect this expensive investment! Thank you and have a wonderful safe Thanksgiving!
@LegendSuspensions9 ай бұрын
Hey Jeff, thank you for your business, we here at Legend Suspensions truly appreciate it! The shock is built the way it is due to the internal assembly, we do have shocks built in the "downright" position. It mainly depends on the internals. Our shocks are type 3 Hard anodized with hardened stainless shafts so they are quite durable, they have a lifetime warranty as well. We also coat the threads on the shocks and we recommend lubrication on the threads from time to time. We use WD-40 Specialist with PTFE as it does not attract dust like normal WD. Or use a silicone-based lubrication. Beyond that you should be solid. The seal you see on top of the damper body is a wiper seal and this cleans the shaft as the shaft goes in past the actual oil seal below it. Hope this answers your questions. Have a Great Thanksgiving Holiday!.
@jeffuda36389 ай бұрын
@LegendSuspensions your welcome and thank you for the information and I will certainly get that type of WD-40. I'm glad I got a very tough design shocks! Even my girlfriend loves them!
@matthewtopp5695 Жыл бұрын
Can you make a video adjusting these shocks by yourself.
@LegendSuspensions Жыл бұрын
Hey Matthew, thank you for the request, we will forward this to the video team.
@lqqkout4thedude5 ай бұрын
Can you explain how you were able to properly set the sag without taking into account the weight of the two saddlebags and it's contents? That could be 30+ additional pounds of weight. Shouldn't you be weighing the two saddlebags, taking that weight and adding it to the rear seat before you set the sag?
@LegendSuspensions5 ай бұрын
Great question. When setting the sag, it is best to set the sag, actually closer to the 3/4" sag range so when you add the saddlebags and gear, or Tour Pak that you are not outside the target sag range of 1" or a length of 12" with all weight. On a 13" shock with a 110 Standard spring, each 360-degree rotation of the spring will add or remove, for simple math, 20 pounds of spring tension. Adding 30 pounds of bags would essentially be one additional turn per shock, plus any turns needed to account for heavier gear, speaker lids and so on. This same method can also be used to account for a passenger weight if they are not present at the time of sag setting. That will get you in the very close ballpark, we do always recommend just doublechecking later on when possible. We hope this answers your questions, if you have any other questions, please feel free to email service@legendsuspensions.com and our techs would be happy to cover any further details. Thank you.
@lqqkout4thedude5 ай бұрын
@@LegendSuspensionsThank you for the quick reply. One more question. My riding buddy has the Revo-A shocks. I was helping him set the sag. I removed the saddlebags and weighed them. 55 lbs! He has a lot of stuff in them, tools, etc. I added 55lbs of weight to the rear seat, and set the sag to 12" with him sitting on the bike, feet on floorboards. (13" shocks on a 2016 HD Ultra). He should be all set and good to go, correct?
@LegendSuspensions5 ай бұрын
Hey, yes that should work, simulating the weight on the seat or in saddlebags works perfectly.
@kmern69792 жыл бұрын
My installation and sag adjustment - springs didn't turn as easy as it looks and seemed harder to turn like threads were tight? I was going to use silicone but didn't want to gather road dirt in the threads for future adjustments? any suggestions? also I had No lock water on my stock shocks, so setup w/o one. thanks
@TheMakarov910 ай бұрын
Just got a set of these for my 2021 Roadglide and they are stiff and hard to rotate the spring. Can i just spray some WD40 on the threads and make it easier to turn or is that not recommended for these shocks and do i need a grease of some kind
@LegendSuspensions9 ай бұрын
Hello, thank you for your business. We do recommend lubrication on the threads, we use WD-40 Specialist with PTFE in it. You could use normal WD-40 but we recommend removing any excess WD off the threads as regular WD will collect dust and road grime and tends to cake up in those threads. Any silicone base lube works well also.
@TheMakarov9 Жыл бұрын
I have the Revo A shocks on my 2021 Roadglide, i bought them barely used with about 300 miles on them When i hit the slighest bump, i hear something that sounds like air swooshing or like a squeak of air coming from the shocks Is this normal to have this sound, it's a bit annoying
@LegendSuspensions Жыл бұрын
Hello, the sound you are hearing is normal, this is oil passing through the shock. The sound will be more noticeable on higher rebound numbers as the shock restricts more oil and less audible when on lower settings due to less restriction.
@Charlies_Riding_Adventures2 жыл бұрын
Very informative: I have a question though. What keeps that spring from spinning and changing pre-load? It seemed you turned that spring relatively easy.
@LegendSuspensions2 жыл бұрын
Hey thanks for reaching out. The weight of the rider and motorcycle give it enough pressure to not turn while riding. We have never had an issue with the coil turning on its own.
@danadiggins7934 жыл бұрын
I had the legend suspension installed at my local HD dealership. I told them to set it up for a cross country trip for next June/July for two up riding and 50 pounds of gear putting the fully loaded bike near gross max vehicle weight. Riding it solo now with no gear and tour pack removed it rides like a truck! Every bump is felt. I know I can’t adjust the front without taking them apart (I wish there was a way) will adjusting just the rear suspension as you describe in this video make the ride softer for just me without compromising the overall handling of the bike?
@ijustwanttorip5021 Жыл бұрын
Yes
@scottymcbride156 Жыл бұрын
What do you got for trick front suspension, I have 40 mm forks with gold valves in it and shorter springs It made a huge difference on my sportster The kid wasn't from you guys though I want to see what you guys have available maybe you got something better
@LegendSuspensions Жыл бұрын
Hey Scotty Can you please email us your bike details like the year and those suspension modifications you have done so we can get some part numbers together for you and get you some accurate options. Service@legendsuspensions.com or we have a chat feature on our site as well, you can drop the info there and they can even call you if needed. Thank you
@ocglide25664 жыл бұрын
Great info. Question for you I have a 2019 Road Glide Special I went with the 13" Revo shocks which is a world of difference over stock for sure. I have noticed that when I am not sitting on the bike that the axle is touching my muffler on the right side of the bike. I realize I went from a 12" shock to 13" so it is a bit longer is this normal?
@nicksandy14902 жыл бұрын
Wondering the same thing... Did you ever figure anything out? when bike is upright its great but when leaned over on kickstand, axle nut just barely hits the exhaust in the divot Thanks Nick
@VinhNguyen-cs2ny Жыл бұрын
Tkhs for sharing I had 2014 StreetGlide special my weight 130 lbs if I put 12” Shock and I put lower kid in the rear for 1” or 2” lower. Can I able to do that? Tkhs
@LegendSuspensions Жыл бұрын
Hello Vinh, Thank you for the comment. On the 14 Street Glide we recommend the 12" shocks, if you are a lighter rider and need a lighter spring to get your sag range optimal, we recommend reaching out to Customer Service as we have an option for you. If needing to get lower than the 11-1/2" ride height the 12" shock provides, then we recommend AIR suspension because this will go way lower when you need it, while stopped, moving across a parking lot and so on. Our air shocks will compress to 10-1/4" when fully aired down and the bike will still roll. As for your question on lowering kits, we do not recommend the use of them with Legend shocks as the suspension sag will be much harder to set due to altering the suspension geometry, the shocks will suffer in ride quality due to the use of lowering blocks. It may also impact the lifetime warranty if an issue with the shocks stem from the use of the lowering blocks. Incorrectly set suspension sag can make the shocks too soft and prone to bottoming out, or too stiff and make the ride too hard, and the lowering blocks make setting this accurately much more difficult. It will also make your current spring rate operate differently. We hope this helps answer your question. If you need further details we offer a chat feature on our website with a live tech, or please email service@legendsuspensions.com Thank you.
@VinhNguyen-cs2ny Жыл бұрын
@@LegendSuspensions Tkhs For explained 👍
@thomastreder31962 жыл бұрын
I am having these put on a 2011 Ultra Limited. Great video/explanation. Correct if I am wrong. I set it up for me and get that dialed in. When I add the woman's 135lbs, I re-measure and increase or reduce the tension to obtain the 3 inch SAG with her now on the bike. If I determine I need to make 5 clockwise turns with her on bike to obtain the 3" SAG, I shouldn't have to re-measure with her not as a passenger, I would just need to turn 5 times counterclockwise to get back to my original solo setting and it will be accurate? Thanks.
@LegendSuspensions2 жыл бұрын
Hey Thomas, thanks for reaching out. When you are adding weight to the motorcycle, you will increase the tension on the suspension to get the 1 inch of sag. So you are correct if you turn It 5 times to get to that 1 inch of sag with another person on, you would just take those 5 turns back out when it is just you. If you have a 13 inch shock, the suspension should be 12 inches from eyelet to eyelet.
@MLZ592 жыл бұрын
@@LegendSuspensions So , if you add a passenger you increase the spring turning clockwise?
@heathsilcott55402 жыл бұрын
@@MLZ59 turning the spring counterclockwise with thread the cup at the bottom up the shock body, therefore compressing the spring and adding tension.
@edellison64402 жыл бұрын
Will a 13" Revo a ride softer than a 12" Revo with the correct sage settings for each shock and similar rebound settings?
@c5vette7396 ай бұрын
Just curious what the difference is between standard duty and heavy duty versions.
@LegendSuspensions6 ай бұрын
Our Standard spring rate is 110 and the Heavy-Duty version is 130. Our standard spring will work great up to about 500lbs of added weight on the bike, but if you are adding 300, 400, 500 lbs. to the bike 50% of the time or more we often recommend the HD spring rate as it just tends to require less adjustment between solo and 2-up riding. and in those weight ranges you can rally go either way. but if you add a person or some extra gear the HD spring will have a further range instead of getting to the tipping point on the standard spring and needing it changed. If you have any additional questions, we do have a live chat feature on our website with techs, or please feel free to email service@legendsuspensions.com. We will also be in Daytona if you are going to be at Bike week, you can come see us there.
@c5vette7396 ай бұрын
@@LegendSuspensions Thank you!
@seabass_m Жыл бұрын
so if i want the rear of my bike to be lowered 1” and i get 13” shocks, having the sag set at 1” will that make my bike be the 1” lower?? or do i need to have a 2” sag to get that 1” lower? or do i need to get the 12” shock?
@LegendSuspensions Жыл бұрын
Hey there, It will depend on your shock length now. 13" shocks can have a max of 1" of suspension sag putting you at 12 while seated" 12" shock can have a max sag of 1/2" putting you at 11-1/2" while seated. If you are looking to get lower than this then we recommend something like our air suspension which has the ability to air down, it is still rode at the 12" height but can be lowered to 10-3/4" when aired fulling down, you can still roll the bike safely and get around parking lots, back the bike and so on. Not intended for long term riding in the full aired down position. If you need any further help please feel free to use our website chat feature to chat with a live tech, or please email service@legendsuspensions.com Thank you.
@seabass_m Жыл бұрын
@@LegendSuspensions great thank you, that cleared up my confusion!
@Ali-iq4bb Жыл бұрын
How does this measurement work if the measurements are w just a rider? Once you add 2 saddlebags w my speaker…. How will that change the magic number? Tell me I don’t have to take the bags off/on to get my sag
@LegendSuspensions Жыл бұрын
Hey there, you can set your suspension sag for a little less than 1" on a 13" shock or a little less than 1/2" on a 12" shock, that way when you put the bags on you are still good to go. 1" or 1/2" are the max sag and you can run less, you just want to ensure you do not have more than that max recommendation. Often when you take the bags off, like in your case where they have audio and added weight. If you add about 2 more turns to account for the bag weight, that should have you right in the wheelhouse. If you have any further questions on this, please feel free to reach out to our Customer Service Dept and they would be more than happy to help ensure you are dialed in.
@Steve-fq1ln2 жыл бұрын
You've probably already done this m8 softail on spring not bag install and set up, what options. Thanks
@TheVyrusian2 жыл бұрын
Hello. Is am from the Netherlands. Are Legend suspensions also for sale in Europe? Does the SAG also fits for the standard shocks of Harley or is it only for the legend shocks.
@LegendSuspensions2 жыл бұрын
Hello Michel, Legend Suspensions are available world wide, any shop with access to Parts Europe, Custom Chrome can order those for you, if you absolutely cannot find a local shop to order, we do offer international shipping options as well on our website.
@anthonygalgian283115 ай бұрын
I have these on my 06 Dyna FXD, when I sit down or go over any pump the right shock goes pshh psshhh, like air is shooting out of a valve. Their not air? Is it blown?
@LegendSuspensions5 ай бұрын
Hello, we would say to check and see if both shocks are on the same rebound setting as that sound, is the sound of oil passing through the valves in the shock and is generally a sign the shock is functioning. The shock that is not making that sound could need to be looked at. We would recommend you please email service@legendsuspensions.com and we would be more than happy to work with you on any details.
@mrbkblack2 жыл бұрын
Do you guys make front suspension for 2019 harley street glide
@LegendSuspensions2 жыл бұрын
Yes we do! Here is the link to what we offer for your bike. www.legendsuspensions.com/?s=&ymm_search=1&post_type=product_variation&_cat=MOTORCYCLE&_year=2019&_make=HARLEY-DAVIDSON&_model=FLHX%20-%20STREET%20GLIDE
@Bull_Headed_Bagger Жыл бұрын
what about the saddle bags? probably another 50+ lbs with gear in them.
@LegendSuspensions Жыл бұрын
Hey Floyd, Great questions. When setting sag we would say, while you are seated on the bike. Have the shock measurement from center bolt to center bolt be more like 12-1/4" on a 13" shock this will allow the bag weight to weigh it down more and still be right about that 12" mark. For the 12" shocks, it would be the same, while seated the shocks could measure 11-3/4" allowing the bags to compress the shocks another 1/4" or so being as the max sag of 11-1/2" while seated with bags. If adding a passenger then both of you and the bags should be at those ranges to avoid bottoming, which would just require you to add more turns. We would be more than happy to assist in more detail if needed, we offer a live chat feature on our website with a tech, or please email service@legendsuspensions.com Without knowing your shock length and spring rate, we recommend connecting with customer service for further details. Thank you.
@kerbydelancy43474 жыл бұрын
Can your rear suspension shock works with the Iride by ThurderMax air system, where there’s one shock that’s setup with the air ride, while the other is a normal shock?
@44hottrodd2 жыл бұрын
I just bought Legend shocks from my Harley dealership for my 2014 ultra limited. I got the 12 inch shock to lower my bike one inch with 1/2 inch sag. When I tried to adjust the sag after install, the spring would not turn. Dealer told me to raise the bike up. I did that and I still can barely turn the shocks. I got the shock to turn one and half turns. Still no sag and they will not turn any more. I'm starting to regret buying legend shocks and it looks like I wasted my money! The video shows they turn really easy and that's not true in reality!
@LegendSuspensions2 жыл бұрын
Sometimes the spring adjusters can be a little difficult to get turning the first time that one attempts to adjust the shocks. Here are a few recommendations to help you out, please try these, as this will usually cure the issue. 1) Apply a small amount of penetrating oil (WD-40, PB Blaster, etc.) to threads on the top and bottom side of the spring preload adjuster. 2) Jack the bike up until the rear tire is off the floor to relieve the weight of the bike on the rear shocks 3) If needed, use a filter strap wrench around to lower spring seat (preload adjuster) to get the adjuster freed up and moving. In many cases, it is just a matter of breaking the surface tension between the two components to get everything moving. Once freed up and moving, the adjustments can then be made by hand. After the adjustments are achieved, be sure to clean the oil residue from the penetrating oil from the shock(s) to ensure that it doesn't collect dirt and grime. This should help you out, please let me know if you have any additional questions.
@kgl1056 Жыл бұрын
Quick question If I have 12 inch should the sag be set at 11.5 inches with the weight of a passenger as well, so if both of us were seated on it I should I have 11.5 inches of sag.
@LegendSuspensions Жыл бұрын
@Krislombardi, Yes, that is exactly correct. The 11.5" should be taking into account with all riders, gear and so on. In most cases people will do this with the bags off the bike, so we recommend the measurement being slightly higher so when you install the bags you do not push the 12" suspension past it's max sag. essentially add another turn our two to account for when you put the bags back on the bike. Max sag is the max you want it to sag with riders and gear, if you set this without all the gear then it will sit lower once you do and this will leave you more prone to bottoming out. It is not like you have to get it down to the exact pound, Just being mindful of adding good amounts of weight and not telling the suspension you did that. We'd call 25lbs in a saddle bag or 50lbs between both bags a good amount of weight. If you need any further assistance, please check out our live chat feature on our website, it goes directly to our customer service techs, or email service@legendsuspensions.com. Thank you.
@twolrbuffalosoldier55142 жыл бұрын
Silly question, it takes three people to set the sag for 2 up?
@LegendSuspensions2 жыл бұрын
Hello, thanks for reaching out. If you want the most accurate sag for your specific weight, having an extra person to measure for you would be the best solution.
@ParaSteph734 ай бұрын
Merci 🙏
@LegendSuspensions4 ай бұрын
Most welcome!
@ssg_marty_mcfly88772 жыл бұрын
so i have the 13" Revo-A's on my 2019 RKS and im looking at AXEO. what is the best paring? the standard AXEO or the -1" Axeo. Bike is a daily, not a performance bagger.
@LegendSuspensions2 жыл бұрын
@SSG_Marty_McFly If you have 13" shocks we recommend the Standard height Axeo for your application. On the 2019 Road King Special the kit you would want if you have and are keeping the stock front wheel size is the 0414-0516 kit.
@ssg_marty_mcfly88772 жыл бұрын
@@LegendSuspensions ok thank you, yes I have the stock 19" wheel still. I've just been looking all over and trying to decide. also once I do get them ill have to do an install video as I don't see any RKS install videos. (Thank god for being a Photo and Video documentation specialist for the Army lol)
@kyledwinell2843 Жыл бұрын
Anyone dealing with a hard top out on the revo as??
@LegendSuspensions Жыл бұрын
Hello Kyle, Thanks for the comment, if your suspension is topping out it can more than likely be caused by too much spring preload and not allowing the suspension to travel correctly. Every time you hit a bump the suspension cannot absorb the shock. If you feel the suspension is actually traveling and the rebound is not controlling the bump, then we recommend reaching out to customer service so they can get some additional information from you as you may have something that needs further inspection. We have a live tech chat feature on our website www.legendsuspensions.com or please email customer service. Service@legendsuspensions.com and we would be more than happy to get your shocks running smoothly for you. Thank you.
@TheMrclos805g2 жыл бұрын
I just had the +2 up front and the rears with reservoirs 14 installed but now I get a vibration on deceleration and down shifting any ideas ?
@ghostghost62682 жыл бұрын
quick question....I have a 2016 street glide special and I believe the stock shock is 12 inches. In order to keep this stock height when on the bike, should I order a 13 inch , taking into consideration that the sag will drop the bike to 12 inches? Thanks
@chip98322 жыл бұрын
13 raises the rear end a little. No big deal imo ,rides better
@Donfleebie14 жыл бұрын
So before you put the bags on, you have to take sag out, and guess then, because after bags are on, it's tuff to measure and adjust. Is this correct?
@Donfleebie14 жыл бұрын
Btw, I'm waiting for a set of 13's standard A's.
@johntojnar70704 жыл бұрын
just to be real clear....I ride solo almost always but I had a 100kg(220lb) passenger on board on the weekend...my suspension was all over the shop. Should I have adjusted my springs tension to compensate? I attempted turning up 6 on my settings and it didn't help at all...after watching your video here it seems I should have turned my springs counter clockwise maybe about three revolutions to compensate....Is that right?
@MrAndrew43414 жыл бұрын
Do you guys have a rough estimate for how many turns of preload to add for a passenger?
@anthonysimmons68842 жыл бұрын
I just took off my air suspension.wondering if i made a mistake.
@ronjohnson3438 Жыл бұрын
can they be mounted so that the dampening adjustment is at the top to make adjustment without having to take the bag off thxs Ron
@LegendSuspensions Жыл бұрын
Hello Ronjohnson3438 Thank you for the comment. We do not recommend running the shocks in this configuration. We only recommend they be used per the install guide.
@anthonygranger73892 жыл бұрын
Does legend make shocks for Softail older ones. I have a 95 heritage
@LegendSuspensions2 жыл бұрын
Hey Anthony thanks for reaching out, we have an Air Kit for your bike. Here is the link to those, www.legendsuspensions.com/product/legend-air-st-softail-89-99/
@Paul-ds4yf Жыл бұрын
Three different posters pointed out the discrepancy in your stating the pre adjustment height of the shocks - 12 and 1/4 vs 12 and 3/4 but you haven't addressed it. Please do so as it definitely affects understanding what you did. It is clearly an error that should be corrected in your video.
@LegendSuspensions Жыл бұрын
On 13" shocks when you sit on the bike depending on the weight of the rider(s) you will get a certain center bolt to center bolt measurement. The measurement you are shooting for is 12" center to center while seated on the bike with the normal weight that you would expect to have on the bike. 1" of suspension sag refers to the shock being 13" from the starting length and 1" of sag makes it sit at 12" while seated. since you want the shocks to compress right about 1" from the original length, this includes the rider(s) gear and weight of the bike, everything combined should not be more than 1" For instance, if you were to sit on the bike and measure and get 11" anything, you know the spring is too loose and would need to be tightened to add spring tension and reduce the sag. It depends on what end of the shocks you are looking at but how Chase was standing in the video looking down at the top of the shocks a clockwise turn was removing spring tension to allow the shock to sag more since he did not reach the 12" point while the rider was seated. technically what looks like a counter-clockwise turn would be adding spring tension, if you look at the shock from the bottom upward you can see it is still righty tighty . From the original 13" shock length, rider sat on the bike and compressed the shocks 1/2" so the overall length became 12-1/4" from the starting 12-3/4" (due to weight on the bike) we increased the amount of sag 1/4" for a total of 1" making the overall rider/static sag 1" If the measurement was 12-1/4" it would need 1/4" more sag in addition to the 3/4" we already have to make the overall 1". If the overall length is 13" and the weight of the bike compressed the shocks 1/4" this is where 12-3/4" comes into play, you have to take the static sag (weight of the bike compressing the shocks) into account in your sag measuring or you will end up with too much sag. Hope this answers your questions, if you need any further explanation, please feel free to reach out to our customer service depart via chat feature on legendsuspensions.com or email service@legendsuspensions.com
@LegendSuspensions Жыл бұрын
Sorry for the delayed response, KZbin is hiding comments on us. Glad this helped. And yes, you are correct. Bike weight is referred to at static sag, then rider(s) sag, plus gear.
@extremebaggers78172 жыл бұрын
In other words did the three turns make it sag 3/4 of an inch or a quarter of an inch
@anthonytucker75744 жыл бұрын
Tried adjusting and it won't move but the coil starts popping what am I doing wrong?
@KPBC0602 Жыл бұрын
Guys, I'm a little unclear by the measurement figures stated in the video. When first measuring center bolt to center bolt with the rider sitting down, I heard "we have 12 1/4 inches." Next I heard that our target was 1" of sag with the 13" shock. "That with 12 3/4, we've got a little more loosening of the spring . . ." Then, I see 3 clockwise turns to adjust. Did you add 1/4" of adjustment with 3 clockwise turns, or did you make 3/4" of adjustment with 3 clockwise turns?
@LegendSuspensions Жыл бұрын
On 13" shocks when you sit on the bike depending on the weight of the rider(s) you will get a certain center bolt to center bolt measurement. The measurement you are shooting for is 12" center to center while seated on the bike with the normal weight that you would expect to have on the bike. 1" of suspension sag refers to the shock being 13" from the starting length and 1" of sag makes it sit at 12" while seated. since you want the shocks to compress right about 1" from the original length, this includes the rider(s) gear and weight of the bike, everything combined should not be more than 1" For instance, if you were to sit on the bike and measure and get 11" anything, you know the spring is too loose and would need to be tightened to add spring tension and reduce the sag. It depends on what end of the shocks you are looking at but how Chase was standing in the video looking down at the top of the shocks a clockwise turn was removing spring tension to allow the shock to sag more since he did not reach the 12" point while the rider was seated. technically what looks like a counter-clockwise turn would be adding spring tension, if you look at the shock from the bottom upward you can see it is still righty tighty . Hope this answers your questions, if you need any further explanation, please feel free to reach out to our customer service depart via chat feature on legendsuspensions.com or email service@legendsuspensions.com
@KPBC0602 Жыл бұрын
Thanks for the reply. I guess I'm just not smart enough to grasp this. If a 13" shock compresses to 12 1/4" with the combined weight of the bike and rider, I'm reasoning that the combination of the bike and rider's weight reduced the spring length 3/4" (13 inches minus 3/4" = 12 1/4") based on what I heard in the video. Then, I heard Chase say that because our target for the 13" shock is 1" of sag, we know that with 12 3/4" we've got a little more loosening of the spring to do. First, where did 12 3/4" come from? I thought he concluded the center bolt to center bolt distance to be 12 1/4." Second, what is the distance measured? From the middle of the top bolt to the middle of the bottom bolt is how far apart? 12 1/4" or 12 3/4?" I'm not trying to be difficult. I just want to explain where my confusion lies. My thinking is that if we want 1" of sag for a 13" shock, we're trying to hit a 12" center bolt to center bolt mark fully loaded (bike + rider weight). Is that right? If the bike and rider weight compresses the 13" shock to 12 1/4," we would want to add 1/4" of sag to reduce the gap from 12 1/4" to 12" in my non-mechanical mind. At this point, I continue to be confused by Chase's 12 3/4" measurement. Which one is it? Returning to the original measurement of 12 1/4" bike+rider weight, Chase turns the shock 3 full 360 degree rotations so that the "Legend" name rotates from right to left while he's facing the shock. When he completed those 3 full 360 degree right to left rotations, did he reduce/increase the sag by 1/4" from 12 1/4" to 12" or did he reduce the sage in 3 full rotations from 12 3/4" to 12"? After reading all this, you may conclude that I'm hopelessly confused and beyond help. Perhaps. But, I just purchased a set of Revo-As that I hoped to install them myself. I'd be grateful to know if I'm on the right track, slightly off, or completely in another orbit.
@cheswic11 ай бұрын
How long did you leave that jadrool on the bike? Informative video, thanks!
@LegendSuspensions11 ай бұрын
Word on the streets is he is still sitting on the bike. Glad the video was informative.
@cheswic11 ай бұрын
🤣🤣@@LegendSuspensions
@LonesomeNomad1372 жыл бұрын
I bought a set of Revo-A's for my 93 FLHS. The difference in the ride is insane. I needed this to understand how to fine tune them. I do have one question. The knobs for the rebound setting do not stop at setting #1 and #6. You can keep turning the knob to the direction of your choice. I guess what I'm trying to ask is does that affect the quality of the rebound settings? Duh, I feel like I'm dancing around and not explaining my question. Why do the dials keep spinning?
@tylerwatkins63192 жыл бұрын
No. They are fixed settings from my understanding. So if you keep turning clockwise from 6 to 1 then your setting is back down to 1
@LonesomeNomad1372 жыл бұрын
@@tylerwatkins6319 thank you brother. You’re the only one to answer. I appreciate it.
@tylerwatkins63192 жыл бұрын
@@LonesomeNomad137 not a problem. Don't quote me 100% but with all the research I've been doing I'm about 90% certain that's right. I'm about to order mine on Friday. How do you like yours so far?
@LonesomeNomad1372 жыл бұрын
@@tylerwatkins6319 I’m confident saying you are gonna love them. It’s the upgrade that you notice right away. I still have issues with the front. I just finished talking to the Legend rep who said that as of today they have no cartridges for it because it’s pre 97. Progressive does make cartridges for it and they get rave reviews. I’ll be ordering a set soon. Good luck Brother, you’re gonna love them. See ya on the road.
@tylerwatkins63192 жыл бұрын
@@LonesomeNomad137 thanks man. Keep the rubber down and shiny side up
@blackedoutbandit2 жыл бұрын
I have a 2020 ultra limited I ride solo alot but sometimes I ride 2 up. I'm about 235 and my wife is about the same. Should I use the heavy duty springs or the standard springs? Also should I go with a 14in shock or 13in?
@LegendSuspensions2 жыл бұрын
With the heavy duty vs standard, you should be fine with standard. If you are riding 2 up over half the time then we can swap the springs out to heavy duty. As for the 13 vs 14, there's a lot of factors that play into this decision. Do you like your bike at stock height? Are you going to be raising the front end up? Do you have a short exhaust?
@blackedoutbandit2 жыл бұрын
@@LegendSuspensions I got it all figured out thank u. I already installed a set of 13in revo arc. I'm liking them so far. Lol I'll be posting a install video to my KZbin channel
@brettlowery31212 жыл бұрын
I did have a quick question, what would be the advantages of getting a 14-in over a 13 inch I understand overall I'd give you an inch but what does that do as far as handling with the bike does it give you more ground clearance, are you able to lean it more are you able to have more of a travel in the suspension? I have a 09 ultra classic CVO. And me and the wife ride 95% of the time together. I didn't know about the 14 inch??
@LegendSuspensions2 жыл бұрын
Hey Brett thanks for reaching out. When you raise the bike it will had more ground clearance. One thing to consider in order to run a 14" REVO ARC on an FL Touring model, you will need a short exhaust slip-on that ends prior to the rear axle. If your exhaust extends past the rear axle, the axle nut will contact the exhaust with the 14" shock due to the longer shock length, and the resulting extension of the swingarm. When running a 14" REVO ARC on a FL Touring model, we recommend a +2" AXEO and fork tube be used on the front suspension in order to maintain a level chassis.
@brettlowery31212 жыл бұрын
@@LegendSuspensions okay I understand that I have truthful exhaust with Brian Hart slip-on mufflers so I'm not changing that okay so the 13-in would be the way to go. 10-4 thank you very much
@ronaldlsmith12 жыл бұрын
I'm all ears I have the 12 inch revos
@chaseabrams95662 жыл бұрын
I bought 12in revo shocks for road glide. I've noticed stiff shocks not necessarily a smooth ride. I weight 170lbs and I have a tuff time getting 1/5 in sag. I barely get those shocks to sag I'm close to the 1/5 sag. I have one thread leftshowing on the shocks
@golfnutbigd20012 жыл бұрын
What should a person do if you set the sag to the 1" and you bottom out all the time on the Revo A's?
@LegendSuspensions2 жыл бұрын
Hey thanks for reaching out. You shouldn't be bottoming out if you have the sag set correctly. Would you please email service@legendsuspensions.com and make sure we get you set up correctly. Thank you!
@timothychmura80432 жыл бұрын
What if you turn the rebound adjustment too far
@ranasajay2 жыл бұрын
Can i get these type of suspension for my royal Enfield meteor 350?
@LegendSuspensions2 жыл бұрын
Unfortunately our suspension is made for Harley-Davidsons and a few Indian models.
@ranasajay2 жыл бұрын
@@LegendSuspensions could you please suggest any other suspensions for my meteor 350 please....
@Tom-jw1pe Жыл бұрын
Why would a person get the 13” vs the 14”
@LegendSuspensions Жыл бұрын
Tom, Good question, we do have a video that talks about this. But in most cases something like the 14" shocks can be a bit of a special fitment, most of the time you need a shorter exhaust to fit 14" shocks, or some mild alterations. We also do not recommend the 14" shocks on bikes without a taller front end, this requires replacing fork tubes in most cases so it is quite a bit more complete upgrade where front and rear are being done at the same time. Where as something like a 13" shock fits a lot more exhausts, including factory, does not require changing the front tubes or front end. with 13" shocks they have the ability to to sit right about 12" so they can even fit stock street glides. The main things you gain with taller shocks is another 1/2" or travel. 13" have 3-1/2" where 14" have 4" of travel. An you gain some additional ground clearance. We hope this answers your questions.
@FLHXSE_HD8 ай бұрын
Hi, what is the SAG?
@LegendSuspensions8 ай бұрын
Sag is referring to how much the suspension sags when you sit on the bike. from a 13" shock length, if you were to install it and sit down on the bike and measure from the center of the top shock bolt to the center of the bottom shock bolt and read 12" this would mean you have 1" of sag.
@FLHXSE_HD8 ай бұрын
@@LegendSuspensions so, when I choose a shock, do I have to choose a long sag to get a comfort ride feeling?
@LegendSuspensions8 ай бұрын
Our 12" 13" or 14" will all be comfortable and far better performing than stock suspension by a long shot. If you have 12" shocks on your bike and like how it looks and do not wish to change the length, you will absolutely find more comfort in our 12" shocks over stock. When it comes to different lengths here is how it really shakes out. 12" shocks will have 2" of suspension travel. They get a max of 1/2" sag, this would have you sitting right in the 11-1/2" range while seated on the bike. 13" shocks will have 3" of suspension travel and will get a max of 1" of sag, this would mean you are sitting at 12" while seated on the bike. The overall difference is sitting at 11-1/2" with 2" of travel or sitting at 12" with 3" of travel, the main change there is 1/2" is height difference but you are gaining 1" of additional travel on the 13" Again, if you absolutely do not wish to alter height at all then 12" would be the choice, if you are fine with 1/2" difference then 13" would be a great choice because of the additional travel gain, most people would not notice 1/2" difference in appearance but would feel the 1" additional travel. The good thing is our shocks length can be changed, if you get 12" and decide you want 13", we can get them in for a conversion and that goes the same for the other direction as well. So, you will never be stuck with something that truly doesn't work for you.
@FLHXSE_HD8 ай бұрын
@@LegendSuspensions Thanks a lot for your clear explanation. I'd like to buy the specific product among Revo, Revo A. 1) Revo has a funciton to adjust the preload(in Your homepage's pic for Revo doesn't show a function of adjustment) 2) Revo can be used with rear shock lowering block like Advandblack because 12" for me would be uncomfortable footing ground firmly so I'd like to use a lowering block. 3) Can I just get a more comfort and performance rather than stock shock with Revo even if I don't choose a Revo ARC among the coil suspecsion 'cause of price.
@LegendSuspensions8 ай бұрын
There are 3 Revo options. 1) Revo will have preload adjustment (turning the coil) 2) Revo-A will have preload adjustment and 6 position rebound adjustment. 3) Revo-ARC will have preload adjustment, Rebound adjustment and compression adjustment. We have videos on all of those shocks as well as comparison videos. You can absolutely get comfort and performance out of any of them, and they will all perform beyond your expectations. If you are concerned with height, we recommend getting a 12" instead of 13", the 12" will sit at 11-1/2" while seated and this will be the lowest sitting coil shock we offer, we do not recommend the use of lowering blocks with our suspension as this will alter geometry and make them harder to adjust correctly as well. If you desire a shock lower than 11-1/2" then we recommend you take a look at our AIR suspension as this will allow you to have ride height when needed, on the fly height adjustment, and the shocks will compress to 10-1/4" when aired all the way down.
@cathyfields4 жыл бұрын
I have a question would the Revo A's be better than the stock air shocks that I have on my 2010 Street Glide
@wb45144 ай бұрын
Can you provide me with a coupon code ?
@LegendSuspensions4 ай бұрын
Hello, thank you for the comment. Legend Suspensions products are MAP Policy so you will generally find them the same price everywhere. The only on-going discount we at Legend Suspensions offer year 'round is a 10% Military, Law Enforcement and First Responder Discount. which would need to be obtained from Customer Service. To qualifying individuals. Or you can also check with your local shop to see about that same discount if you happen to be any of those things. Thank you.
@zorro37024 жыл бұрын
Can you please do the front end set up as well. I purchased the whole package revo-a and www.legendsuspensions.com/product/axeo21-flh-front-end-suspension-2014-20/. The front end seems to hit very hard, it rides worse than the stock set up did. What I mean is the front end seems to bottom out over any bump or rut I ride over. The garage that installed them said he left the set up at 0. Please help, the rears are a dream but I am very disappointed in the front. Thank you.
@extremebaggers78172 жыл бұрын
Ok is it 12/34” or 12&1/4” you measured.
@raydelfa11252 жыл бұрын
Ya don't need 1" sag on a 13" shock if you ride 2 up all the time. Because the rider is 160 extra pounds on the back.
@LegendSuspensions2 жыл бұрын
Hey Ray, thanks for reaching out. We recommend setting the sag for 2 up riding. This allows the shock to work properly with the amount of weight that is on the bike. Our 13" shocks are designed to be ridden with 1" of sag.
@raydelfa1125 Жыл бұрын
I have the 13" ones, I'm 215 and my wife is 160 and our tour pack we install is very heavy with our gear in it, so your saying I still need a 1" sag?
@Chrisbea3981 Жыл бұрын
Yes no matter how much weight you add 1 inch of sag is Ideal.