We Finished The Audi RS4 Rescue In 5 Days! Car Perfection Unlocked!

[@LegitStreetCars]

Restore your leather seats today with Clyde's! clydesleathercompany.com/products/balm?Legitstreetcars&YT&AUG Use Code LEGIT10 for 10% off and save 40% when you buy the 4-Step Kit & Use That code!

[@gs1100ed]

Where is that link for the rubber wheel that removes 2 sided tape?

[@thekoofello]

Shout out from a Polish in UK!!

[@timothymclaughlin3273]

Neither

[@TravisLeaver-lx2ve]

Can u turn and re drill the rotors

[@davebusk3159]

Audi all the way

[@alk3myst]

The fuel filter screw restoration changed my life!

[@theraf8100]

The screw.....did in fact..............not come out again.

[@andrewthomason3857]

I will always remember where I was when I witnessed it.

[@zollotech]

Those Tail light engineers should get together with the engine designers. Imagine the repairability. 😀

[@juhopeltonen1531]

1 huge thumb screw, transmission clips in place and one big wiring harness plug and the engine is out.

[@Liam19831]

Hi Aaron!

[@albertalmo9306]

Hey Alex, long time subscriber and first time commenter. I'm a 68 year old Italian man (Papa) living in New England and am a care enthusiast (fanatic). I have to thank you for your awesome videos for not only their entertainment value but more importantly the educational value. You have a great way of connecting with your audience. I can only speak for myself but your genuineness and down to earth way that you present your material is so instructional on a level that even a novice or someone that's never worked on cars can understand. I also think you have a great family and I appreciate that you are a devoted Husband and Father. I love your stories of Mom and Italy. I wish I lived closer, I'd love to come and meet you and see your shop and cars in person. Thanks for what you do and how you do it. Al

[@MattsOrdinaryLife]

Sadly i could only like your comment because they don't have a love it reaction.

[@quintusvanzyl5081]

Awesome

[@PowerSportsQuebec]

Totally agree with your comment Sir!

[@brandonb88]

Go write a book somewhere dude 🙄

[@cs0654]

​@brandonb88 why? You don't like it, don't read it.

[@theParticleGod]

Those rotors aren't in two pieces to allow the pieces to be replaced separately, they're floating brake rotors. Floating brake rotors can reach higher temperatures without warping because they are not directly bound to the center. Normally, warping from overheating happens because the rotors are hot and the center is not, at high temperatures the expanded and softer metal of the rotor loses the battle with the stronger, colder centre and buckles where the metal is hottest. Floating rotors are attached in a way that allows this to happen without stressing either the center or the rotor. An added bonus of floating rotors is that the rotor and center can be made of different materials, allowing the brakes to be lighter.

[@392Cherokee]

I’m 100% Polish…live just south of Milwaukee…..those guys at the Collision center are amazing!! Like you, I could watch it all day….pure talent! Love the Audi 🙌🏻

[@cubegears]

Kurwaaaa

[@chiefrocka8604]

Yak Tak

[@darrelhandgraaf7708]

It's Saturday morning. I just cut the grass and now I'm sitting down, drinking a cold bottle of water, and watching my favorite automotive KZbin channel. I always look forward to watching Alex on Saturday mornings.

[@Tig-Wan]

It’s not cut the grass. It’s mowed the lawn. Wow!

[@technerdy]

oddly enough i had the same routine today 😂😋

[@slickcarpenter4501]

@@Tig-Wan well, what if he cut it ?

[@renaissanceman2868]

Those who mow the lawn are fun at parties

[@Hammerback0]

Saturday 3:27P.M. just started cutting grass. Hungry now that Alex mentioned food. 😂

[@bennybando2233]

I'm Polish from Rockford, Illinois. Tons of Polish and Italian migrated here back in the day, including Chicago. Love your channel brother.

[@dsauce2864]

It makes my heart full knowing someone is giving this legendary Audi the attention it deserves. One of the greatest cars ever made IMO.

[@comfort_in_discomfort]

When this vehicle was first released, I was working at Automobile Magazine in Ann Arbor, MI. I had the pleasure of sitting in the passenger seat while it was being flung around the Waterford Hills race track that Automobile Mag would rent for their Top10. I was taking voice notes while talented race drivers on staff would wring every little bit out of it. Nice to see it rescued.

[@kubarkrun]

I'll tell you what I enjoy the most about you and your channel. And it is how meticulous you are about doing the most perfect job possible. The cleaning is unbelievable. No left over screws, no scratches, obvious ones anyway. It should be how everyone works on anything. You just excel at it naturally. Love your channel, you make it awesome.

[@smwsmwsmw]

There's something very satisfying about watching experienced craftspeople making their difficult work look effortless.

[@HALDikopter]

Hey! The headliner! No cheating here! It's not finished.

[@hogwild5844]

I was gonna say. Is no one gonna mention the headliner!!

[@jrgenlund1300]

Preach! It really lets the car down. It hurts my OCD badly to look at..

[@christianslense455]

I was watching it as he drove. As a tall guy I cringe at the thought of static cling dropped headliner on my hair. Glad some one else caught it too

[@p-townshankzilla2654]

It's, not his car, so it's probably not part of the budget. The owner is probably going to have it done on his own.

[@jrgenlund1300]

@@p-townshankzilla2654 maybe so.. But it's neither "Finished" nor "Car Perfection" ;)

[@Nolepower]

Man between you and Chris Sullivan, you two have the absolute best car channels. We appreciate you guys!!!

[@Tig-Wan]

Who’s Chris Sullivan?

[@Laffs23]

Chris Sullivan is awesome and super underrated as well. A lot of crossover as well both have built a Lightning, Cobra, AMG, and Corvette.

[@charlesenyeart5421]

@@Tig-Wan Chris is worth checking out for sure.

[@jessecoram7453]

@@Tig-Wan@ChrisSullivan69 has one the best car channels! Very underrated

[@edwardmtl]

+1 here for Chris :)

[@erikroutson9306]

Sikkens paint was by far my favorite back when I was spraying. Good to see proper PPE being used in the booth! I lost a co-worker to polyisocyanate sensitization. Beautiful work!

[@frogger1580]

I appreciate you highlighting all these wonderful tradesmen. Please continue to do so. It's nice to see more of the side cast of characters.

[@jim8800]

I am from Poland and I live in Poland. I have been watching you for a long time. I had a feeling that the painter is Polish.

[@p.k.7111]

Same here!

[@maciejotorowski2818]

Me too! 😂

[@Lipik15]

Ja tak samo 🤣

[@harleyleeps6696]

Sealer is basically thinner primer that doesn’t build like primer. Primer needs sanded before painting on it if you want it to look really good because it goes on fat and makes waves. Sealer is ready to paint because it goes on thing and smooth.

[@davidpage8728]

I always wanted to know how to restore a fuel filter screw. This channel is so educational! 😀

[@gagamba9198]

You've unlocked the first achievement of becoming a fuel filter screw aficionado.

[@jacob.s3619]

Sunday morning in Australia (when Alex's videos come out). Just made the kids breakfast and now sitting on the lounge with them watching our weekly dose of LSC🎉

[@Ace_Savage246]

Absolutely love this rebuild! I have such an emotional attachment to this car. I had an 2006 a4 as my first car had it for several years and absolutely broke the bank… but all that money was totally worth the experience of the 6speed manual Quattro. I’ve had several Audi’s after my a4 but nothing compares to this chassis and year of the car! honestly I’ve been wanting to find an b7 rs4 that was needing some live like this one. So happy to see you put this back on the road!

[@cwheeler42]

I had an '06 A4 as well. B7 was the best generation.

[@nonyanks2510]

So refreshing to see tradesmen that clearly know what they are doing, the painter can make or break a bodyshop, Lupe is solid gold!

[@Kenny.Le2006]

Hi Alex, can you give us a rough cost of the repaint job? You used to give us cost break down in old videos which I really like.

[@Patrick94GSR]

That’s anywhere from $3k-$4k I’ll bet.

[@AlbertoGomezSE3P]

@@Patrick94GSR It’s way more than that, trust. I would say double that amount.

[@Patrick94GSR]

@@AlbertoGomezSE3P I wouldn’t doubt it. It’s why I’ll probably have to learn to paint myself to repaint my old Integra GSR one of these days, when I get a bigger place.

[@dogger37JC]

@@AlbertoGomezSE3PI was going to agree but then I realized they only painted the rear of the car. Sikkens is expensive but I don’t think it should have been $6k-$8k for what they did.

[@moxiboxi]

​@@AlbertoGomezSE3Pno it wouldn't be double. If he's used them Before, they would offer cheap service rates. My painter would charged $800 to do that work.

[@dawnotemuwchinach]

Looks like the headliner needs a bit of touch. Easy job with a spray glue and a bit of fabric (black alcantara - maybe 🤔). Greetings from Poland to all fans of this channel 🙏

[@dogger37JC]

Every video it drives my OCD crazy seeing that headliner. 😂 It’s definitely one of those things where you should use the correct adhesive because it sucks having to do it over again.

[@aadamk5159]

I own a rs4 convertible it’s been awesome to watch you working / restoring this one. From the factory it has a valve controlled exhaust so when you push the sports button it open the valves on the muffler and the car runs at full power

[@darronsanders2237]

Arizona student auto tech here. Love the content...been watching for years. Your vids help me with my schooling... extra study material 😂. Thanks Alex

[@MsAntiflo]

Good morning from Regina, Saskatchewan. We started our day with everything bagels with garlic herb cream cheese. Legit Street Cars is a part of every Saturday morning.

[@jmaxim80]

My great grandfather came over from Poland during WW1 and fought for the US. So I'm 3rd generation and very proud of my heritage. Thanks for the shout-out. Those gentlemen do some damn fine work, it sucks they are getting towards the end of their careers. Hopefully they pass their knowledge on to someone.

[@harleyleeps6696]

I love the Astro eraser wheels. FYI I once learned the hard way on a fiberglass spoiler that it will eat right through if it’s not metal. Luckily it was the mating surface and not where someone would see my mistake!

[@southmaplegarage]

3m has a multi layer rubber eraser wheel. Its like 5 1/16 thick rubber disks, you can use it on fiberglass and plastic. Also a new rubber valve stem and drill works on fiberglass hatches.

[@dogger37JC]

I also learned the hard way on a plastic rear bumper 😂

[@bigsarge8795]

I want an RS4. This is the definition of a street beast. Those new brake discs are absolutely gorgeous

[@lancegallant3647]

get one they fucking tule ❤ my rs4 would never sell it unless I had 2

[@michaelcorneliussen9994]

As a detailer i am absolutely into that high gloss polished look 🤩

[@driven5729]

Perfect way to start any Saturday

[@ginols68]

dude i just had breakfast and your video gets me ready to work in the garage on saturdays lets gooooo

[@michaelbolton1090]

Man that rs4 is absolutely beautiful! Perfect wheel choice! Those wheels look like they should have been put on that car from the factory. Also a HUGE fan of blues on cars. So cool!

[@dogger37JC]

Can’t go wrong with BBS CHR’s on an RS4.

[@marcdavis2840]

Gloss - is the answer 👍 I have watched Alex from way back when he first started and nobody does this stuff better. Thanks for keeping it real.

[@andrewjackson8401]

Great episode.. shout out to ohare for allowing you to record and be involved in everything with body work and painting!!!!!

[@shakedown067]

I almost always watch around 5:30-6am Sunday morning. So I sit back and drink a cup of coffee or two while I take in the latest build.

[@sok_pomaranczowy]

I'm polish from Poland and I am watching your channel since garage videos! I love your content and you are my favourite mechanical youtuber :D I am always waiting for the new uploads. Cheers 😎

[@VeltyGames]

Mam tak samo

[@oszkere7887]

ja tez

[@Romanu_Geoge]

Alex have you ever thought on buying a Volvo wagon, fixing it, detailing it and give it more power? I would love to see some Volvo content on the Channel and I'm sure you would love to hear the Volvo 5 cylinder roar!

[@Masterplan15]

An 850R would be awesome

[@Romanu_Geoge]

@@Masterplan15 it would be cool, but they are expensive 😭, it would be better for Alex to buy a P2 Volvo with a T5 engine, they are more plentiful than a 850R especially because they make the same amount of power, yes the 850 is more simple, but the P2 looks better in my opinion and are cheaper

[@Romanu_Geoge]

@@Masterplan15 well, Alex will choose anyway, but lets hope he gets a Volvo wagon in the meanwhile

[@wb5859]

Yes they came from the factory with the active exhaust. Theres a “sport” button that would open and close the valves and in the euro spec version the bucket seats would tighten around your body as well when pushing the sport button. Ive owned 2 of these already… after watching your videos im itching for a third. Just started watching this. Great videos

[@officialfinndevlin]

I am a professional paint mixer currently like Lupe, it’s a very satisfying job. We use spectrophotometers to colour match customers cars which allows us to use a paint system to find best matches for paint across different brands, it’s great for matching paint on older cars as with common colours will have had multiple shades while coming off of different production lines.

[@LegitStreetCars]

What's your favorite Audi of all time?

[@fredshanks2240]

The old 5000 Quattro with the BBS . 007 drive one (Timothy Dalton)

[@natetrombley9488]

I daily a 500hp S5. And would only change it for a 5 cylinder. Quattro life.

[@KhethoM]

This one funny enough.

[@joeltgordon]

I’ve always loved the look of the S7.

[@Dirtyz1234]

I really like the RS3

[@dbusby77]

Awesome video Alex! That body shop is so much better than 90-95% of most body shops that I have seen around me. Top end repair, no doubt!!

[@dogger37JC]

Considering they use Sikkens they definitely are.

[@LegitStreetCars]

Would you rather drive an Audi, Mercedes or BMW?

[@hibye3178]

Bmw on top

[@botshelogonyane]

Mercedes

[@sleepysamk1400]

Non Toyota celica as advertised by Scotty Kilmer 🤣🤣🤣

[@darinsmith.]

Mercedes 100%

[@carlmoore2774]

😂​@@sleepysamk1400

[@JACKArduino]

Don’t know if someone already said it, but the exhaust was active. You pushed the sport button on the steering wheel or on the central console and it would open up a flap in the exhaust to make it sound better. Also the sport button changed the way the accelerator requested torque to the engine. I found some documents regarding this car and the engine and I’m really glad I did because I love this car

[@dustypoe394]

Alex, I love your channel. There have been more car channels than I can count that I have followed since inception (for years) and recently they have all taken huge branding/marketing changes. Their channels are trash now. You're killing it! Your taste in cars is great, your content is always interesting, and there is a TON to be learned from your videos. Keep crushing it and providing the content that you enjoy and your fans love.

[@LegitStreetCars]

Thanks brother! Appreciate you watching!

[@cammmy]

If you are using body filler with hardener containing isocyanates, please, please, please don't smell it. It should be treated like 2k paint as the hardener is toxic

[@rafaelthomas4174]

Headliner???

[@jasonh8470]

To answer your question….I would rather crawl on my hands and knees over tacks than drive any of them.

[@Oo-IIII-oO]

He said drive not own.

[@jasonh8470]

@@Oo-IIII-oO Apparently you didn’t bother to read my post entirely. I also said drive…🤷🏼🤷🏼🤷🏼

[@GoldenCroc]

Somewhat funny answer I guess, if a bit predictable.

[@nicholaskapuscinski4026]

Polish for the win! Love the videos. It's always a highlight to my day when I see a new video posted. Inspires me when I watch to get a project of my own and start tackling things I haven't done before.

[@shaunbaxter83]

Hi Alex, my step-sons paternal great grandfather was Polish and actually flew with the RAF during the Battle of britain as part of 303sqn, so thats a great honour for him, I also have alot of friends whom I have worked with over the years in the UK that are Polish, they are great ppl, very hard working

[@danielklinner8522]

Cool video, very entertaining. Just want to add that the split piece brake discs in my understanding are split to improve heat dissipation, less heat is being transferred to the hub and that in turn helps the bearings under lets call it more spirited driving.

[@Theshitboxtech]

I watch your videos because you're a real tech. I have been a tech for 20 years. From some of you videos you mentioned your age so we are the same age. ( don't forget to stretch and take your ibuprofen and hydrate). Many moons ago when I worked at a European specialty shop, I was told that the grey coating was an anti corrosion and break in coating for when you bed the pads.

[@MLMaffyou1985]

One of the best restoration series around. Absolutely loved watching this. Mad to think that someone gave up on it when it was in reasonable condition apart from the engine gremlins early on. Great work from you guys. Oh and I’m eating ginger nut biscuits with a nice cup of tea, I’m English obviously.

[@auxientius]

REALLY well done Alex. Love the car, love the colour, and love your work. So good to see the end of a miniseries.

[@johntreloar8203]

Nice mini-series Alex, your video's always drop late Saturday night here in Sydney Australia, so I always watch them first thing Sunday morning, great way to start my Sundays, and the meal of choice is breakfast...

[@Jon-ug3le]

I had a 2008 RS4 in D Grey but always loved SB. This channel is woefully under subscribed, should be 5M subs! Love it.

[@viper33182]

As an RS4 guy I loved seeing you rescue this car! You should buy it!!!! Thanks to your inspiration I took my RS4 Cab out for some top down driving today!

[@hillconnor13]

Mechanic from the uk here those fuel filters have pressure regulators in them hence a great idea to change it and I only use MANN filters as they are OE and made in Germany also noticed you didn’t show removing the rear carrier bolts they aren’t exactly fun great work buddy do most of these type of vag cars daily and drive one my self

[@Viking8888]

I usually think Audi’s are nice but not as stylish as a Beemer, but this RS4 is beyond gorgeous! That blue is just stunning. I would LOVE to have that car. Nice job Alex!

[@philippschneidenbach]

Alex, from what i have learned the 2 pc Rotor Concept is not regarding replaceability of the ring, but because of the different expansion of the ring under heat/load compared to the hub element. Different materials, more of a lose coupling.

[@dogger37JC]

They’re suppose to dissipate heat better.

[@TheKaroIisK]

He got some sweet volvos there. Always love to see US spec 740s

[@cs0654]

The RS4 was an aspirational car for me, early in my career. Had a buddy with this exact blue in South Africa, so this restoration's been quite personal Alex. And honestly, including the body work and wheel resto - just loved it! Great vid, even if I'm biased!

[@joemaggio6806]

Appreciate you still doing long form content that I can enjoy at work without flipping videos every 20 mins. Awesome car brother!

[@lschmitt]

Beautiful car, I love the color. ❤ Sad we ain't see it anymore. 😢

[@mpwr321bhp]

Great quick turn around, love the RS4, Glad you didn't have to sort the DRC or the Oil Cooler lines, as they are not fun, and like you said, Chain at the back of the engine is not a fun job. Sure you have been told, but you have had many many comments, as you are a popular man lol, the exhaust vacuum lines are there from the standard Audi Sport backbox, when working the vacuum holds one exhaust flap in each tail pipe open, and when you hit sport, it closes the valve, most get stuck over time if not maintained, so its a mute point, but if you want a choice, a bit of oil and patience can free them, but from time dot, in UK in any Avent, Milltek was the way to do to release the V8s full sound. Keep up the great content. Been following since the high mileage M5, and still loving the content.

[@FanofLexus]

Alex i have been a painter for 20 years and i also use the sikkens paint line. Always a prefect color match. Loved this video

[@danielklinner8522]

Also seen in the last video that you questioned the exhaust. Milltek is an aftermarket exhaust maker for mainly VAG models. The manifolds and downpipes look stock but the cat's look race type.

Hi I’m Polish 🇵🇱 but permanently living in central Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 from 2010 I’m watching your videos from E55 series starting. And yes I am that guy who asked you few times for metrics measurements like Nm, crank HP 😁 best regards from Bydgoszcz Poland where I actually am on my holiday 👋

[@youtubechannel8854]

Coffee and biscotti, excited for this video as I just dont know much about audi/vw. I enjoy your content more than most because it's sort of a tutorial, like i could swap out those pads with the information given. Love your content 💯💯

[@MariuszZieliński-o3x]

Hello from Poland. I have been watching your chanel for two years by now, absolutley love it. It is treue that there is many poles in Chicago area. There is even polish quater in the city (Polish hill). I also had somebody from my family living there (my granddad's brother).

[@awakeadventurer9198]

I really enjoy your videos and appreciate what you do. I aspire do the same thing and more. I have a lot to learn but im excited to do that! I absolutely love cars and bikes. Ive been a professional detailer for decades, but ready to evolve into more of my true passions. Thanks again for sharing your knowledge and doing it with a sense of humor!

[@BrianWood74]

Just a heads up, the 3M eraser wheel will probably be cheaper, found on Amazon. I detail cara for a dealership and that's what I use. They are awesome!

[@Connie-Rad]

Man I love your work! I'm so glad I found your channel! Not only it's fun to watch but also learn so much about the cars from you. Honestly love your energy love your work, keep it up!

[@Connie-Rad]

And also watching you with some coffee and almond croissants

[@cjmyers41]

Alex, man you in a paint booth brought back so many memories for me as a kid. My dad was a painter for 40+ years and I remember watching him outside the booth painting cars. I even have his old paint jacket that he won in a paint competition. If you ever see this message I would love to send you a picture of it.

[@colmart1973]

Great vid Alex, love the acknowledgment the staff got in body repair shop, Lucas is top guy, large polish community here in Ireland for a number of years now, RS4 looks amazing!👍🇮🇪

[@Loxter123]

In the north of west australia the mining Toyota hiluxes used to get very dusty MAF sensors. Always throwing p2006 manifold runner stuck closed. The hot wire ones we used contact cleaner and the newer style MAFs required short but several bursts of compressed air only. Very cool to see explanations in your videos now Alex.

[@Far2hip]

We did a color science workshop and it was some seriously interesting stuff!! Like you said Alex, the colors that you would never think of to make shade variations and adjustments would end up nailing these environmental stage changes spot on. What was even more interesting was depending on the tone of metal flake, it could be an entirely different color combo to achieve the same exact shade adjustment. There is a very cool science to it and there are some paint folks out there that this stuff just makes complete sense just the same way a gifts mathematician can just see the solutions as if they were picture images. Awesome stuff. 👍🏻😎👍🏻

[@djlien16]

Audi B7 RS4 owner here. The stock exhaust is valved. Pressing the S button opens the valves and I believe improves throttle response.

[@chunkbessmer8917]

I own a b6 s4 that’s in a very similar color with rotiform wheels! It is my first manual and first v8! It is timeless and gets heads turning anywhere I go! Great videos!

[@tomfrank2707]

Thanks, Alex for the videos on this Audi. The car turned out beautifully and yes, I'm a big fan of the color. I hope this beauty goes to a good home. Phenomenal job by you and the body shop. This awesome 2007 car looks better than some of the 2024's that are rolling around on the streets these days.

[@dmacarthur5356]

LSC is my favorite car KZbinr because he cleans everything he takes off.

[@Chupacabra2019]

@LegitStreetCars Factory mufflers have a valve that opens with the S button, hence the air lines in the bumper, that is why you didn't notice any difference when you hit the button in the last video. S button changes the sound of the exhaust to a much deeper tone, uses more aggressive fuel maps from ECU and on some models pumps air into the driver seat side bolsters to pump them, up for a tighter seat feel.

[@mwest3583]

You can find the same discs with Brembo parts code for like $450 each. Also if/when it needs a throttle body, it's the same part on the Z06 corvette. "Silver blade" corvette throttle body. Get the GM part number and save $800-$1000. Also, half polish here. Fond memories as a kid visiting relatives in Berwyn. Little old ladies wearing babushkas towing their carts around.

[@shaunmaxwell2745]

Nothing is more fun than watching someone that is amazing at their craft.

[@WayFastWhitey02]

Thank you for saving this beauty! Has always been one of my dream cars!

[@ronsloan7662]

Hey Alex, that is such a beautiful car. I've always liked them particularly in that color. The interior is gorgeous with the blue leather seats. It'll be a great car for whoever buys it. Thanks for the body shop tour of the repair work. It was really interesting. Cheers!

[@sethgreaves3345]

so glad you decided to make a video on this car such a beautiful car whenever i have some time later this week im watching this episode!

[@ronnieboucherthecrystalcraftsm]

all your work = is like german factory trained = in America = 100% total top quality !

[@robbertmadden1386]

Great video Alex, a nice change of pace, refresh everything that I thought I knew about body work. Thanks

[@boredom.victim]

I have the same caliper compressor tool, got the whole kit on Prime Day ❤ it already came in handy even.

[@johnymst]

That's funny I'm Polish and been watching you for years living from Australia and the minute I seen this guy I was 100% sure he's Polish haha! They are really solid with their work! Pozdrawiam!

[@hansbartenopavis2305]

Follow many car channels but your videos are the best👌 really love this audi content. Hope you do more (older) vag cars!!!

[@vee4410]

This is one of the best looking Audi's ever made, seeing it on camera doesn't do it justice💯

[@lancegallant3647]

Fucking right it is love mine brother very $$$ to maintain but man what an epic sedan :-)

[@SHWELL11]

The RS4 is prob the only thing I'd trade my B7 A4 Avant for.. What a wonderful car.

[@lancegallant3647]

100% love my rs4 awsome car

[@jamesf8864]

I absolutely love these cars in Sprint Blue. Utter perfection! Great work by the bodyshop crew here 👏

[@AronBuilds]

I've ALWAYS loved these RS4's! What an amazing daily for the midwest too!

[@CdrMadDog]

we use these rubber wheels to get rid of the glue when removing the balance weights on wheels as well. works like a charm

[@YogisGarage]

So glad this car is in your hands, Alex. I’m always in the market for a sprint blue B7 RS4.

[@kvirk7583]

That's 1 of the best audis ever made my cousin brought 1 bk in 2007 and I loved it ever since amazing car