www.mhornig.de Lenkererhöhung für BMW R1200RS by Hornig www.mhornig.com Handle Bar Risers for BMW R1200RS by Hornig
Пікірлер: 15
@MrHornig6 жыл бұрын
Deutscher Produktlink: www.motorradzubehoer-hornig.de/BMW-R-1200-RS-LC/Alu-Edelstahl/Lenkererhoehung.html English Product Link: www.motorcycleparts-hornig.com/BMW-R-1200-RS-LC/Alu-High-grade-Steel/Handlebar-risers.html
@bieexxx99292 ай бұрын
Please teach me, isn't it necesary air bleedig after disconnect and connect clutch hose from clutch lever ?
@MrHornig2 ай бұрын
Not if you do it correct, like shown in the video ... if you pull the clutch lever during the installation, you must of course bleed it. If you are not sure or don't know how to do, please get the job done in a professional repair shop.
@bieexxx99292 ай бұрын
@@MrHornig thankyou, i did it successfully.
@hagaxxx5 жыл бұрын
but I saw in another place that there is a adapter to enlarge the clutch line to avoid dismal tel half of the bike, right?
@MrHornig5 жыл бұрын
Article number 26865 is this adapter: www.motorcycleparts-hornig.com/BMW-R-1200-RS-LC/Alu-High-grade-Steel/Handlebar-Risers-with-offset.html
@rbnplgrm4 жыл бұрын
@@MrHornig Is the adapter mandatory or manage to loosen the clutch cable is possible?
@MrHornig4 жыл бұрын
@@rbnplgrm It is not mandatory, but it makes the installation much easier. In the video above you can see how you can reposition the clutch cable ... but this is some work and too easy (depends of course on your skills, knowledge and experience).
@rbnplgrm4 жыл бұрын
Motorradzubehör Hornig GmbH thanks for your feedback! Will order my handlebars soon
@LamontCranston2 жыл бұрын
So has anyone had to bleed the clutch line?
@MrHornig2 жыл бұрын
You don't have to bleed it, if you do the installation right.
@berras24 жыл бұрын
This job is not that easy, at 7:15 this guy get stuck in a cable tie or something on the inside of the frame. the video doesent show how to losen this so that you can pull out the cable. I can feel it with the top of my finger but there is not enough room to cut it of
@rbnplgrm4 жыл бұрын
Did you manage to loosen the cable in order to avoid installing the adapter? I'm willing to install these handlebar raisers but I hope without too much difficulty :)
@berras24 жыл бұрын
@@rbnplgrm Yes i bought an inspection mirror and a paper cutter knife and vas able to cut it from the right side of the big rubber hose. I had to puch away a plastic sheet so that i could get the knife in
@rbnplgrm4 жыл бұрын
berras2 wow, macgyver way it is! Thanks for your feedback sir