Lenovo M720q + RX6500: 140mm ARGB Fan Noise and Heat Gone, But Can It Game?

[@infocoreBR]

Ok, now I need a 3D printer...Nice work!

[@ll_spud]

Beautiful! I have same m720q and just ordered a rx6500. Looks like i have to get some rgb fans and a new pc case printed. 😂 Keep up the great work. The mini pc obsession is real. P.s why no Ai voice over with this video. I think it was good

[@septianindrastyawan2874]

@@ll_spud Can a Lenovo M720Q Core i7 8700T be paired with an RTX 3050 low profile?

[@PrinceGeorgeBCiRL]

the ram snapping in sound is very soothing, maybe a market for asmr pc building idk

[@TeajM1510]

masterfully executed (even if i didnt get everything) ! !!! greetz from germany

[@markusi.1927]

Just amazing work! i follow you now for a while and realized now my M920 with a RTX3050. The last think i want is an 140mm Fan and a housing for it. i try a USB Version it is not so much complicated ;) You are realy an inspiration!

[@GilbertTowers357]

Love your vids. Keep it up!

[@itggear]

Appreciate it!

[@davidmurray7038]

Great job there! I recently picked up a Dell Precision 3240 sff. Would love to see someone do a similar mod

[@johnathansmith1003]

I can't seem to find the STL file links under you video.

[@itggear]

I've only made a small adjustment to the 3D case from my previous video. However, I will post the remixed 3D file soon. Thank you.

[@comosehace2767]

could you please share the 3d printed gpu bracket? Thanks in advance, keep it up.

[@amirthry]

Hi where i can buy the case ?

[@H22aPrelude510]

Thats super nice good job

[@itggear]

Appreciate the support!

[@jorgeemilianodiazfuentes148]

I just made the same remix with a 120mm fan , nice

[@StanisawSwierczynski]

remove the fan from the graphics card and see how the temperatures will bebed?

[@itggear]

I planned to do so, but on the first try with the GPU fan, the GPU temperature only reached around 65°C while gaming, so I decided to keep it as is. I recently damaged my RX6400 when a component got knocked off the board, and now it only runs at PCIe x2. With this setup, it is good enough already, and I think I should avoid risking further damage to this GPU. Thank you.

[@MrGeo044]

Hello ITG - Are you going to post these 3 print files on printables?

[@itggear]

I've only made a small adjustment to the 3D case from my previous video. However, I will post the remixed 3D file soon. Thank you.

[@septianindrastyawan2874]

I also have a lenovo m720q core i7 8700T with 32 Giga Ram..Can I install an Rtx 3050 LP on the M720q with 70 watt gpu power

[@itggear]

It should work with some modifications, as I demonstrated in my previous video. You might need to use ThrottleStop to stop the CPU power limit. If you really want to set it up like that, be aware that the PC might not run stably-it may shut down during gaming or under heavy load, and the CPU fan will be very loud. You can undervolt the GPU to 80% power limit to make your PC run more stably. Also, you need the original Lenovo charger, at least 230W, to ensure the PC won't crash often. Thank you.

[@restubryanr1384]

​@@itggeari have same setup with him. But i would like to ask whether a Zotac RTX 3050 can fit into the case, or if all low-profile RTX 3050 models are compatible with the Lenovo M720q? Local stores here only sell Zotac, Gigabyte, and Asus RTX 3050 low-profile models, not MSI. Thanks

[@itggear]

@@restubryanr1384 The PC's depth is 182.9mm, and the space for the GPU is about 172mm. Please check whether the GPU will exceed this length or not. Thank you.

[@kamm3021]

Looks amazing Well done 👍🏻 Is 300W the minimum power supply for that gpu ?

[@itggear]

You can go with the 135W original Lenovo AC adapter with this setup.

[@Hawk3r]

I have a 90w with the rx6500 and it seems like I'm being throttled. I'm going to source a higher wattage adapter

[@AnonIllumi]

@@itggear question are the 3D print fliles available coz, if not selling this as a kit. take my dollars XD

[@FSK1138]

what about a usb fan?

[@QUANZALA]

how much does it cost to print out this

[@itggear]

Filament costs $15 per kilogram. Using approximately 200 grams would incur an electricity cost of about $2. Thank you.

[@nightwishm24]

i have the same model with a lower cpu. if i put a Gpu in it, i have no signal. tried all pci gens in the bios. nothings works and with a another 135w ac is the same dont know what it is

[@fatihozis]

Original ram already 8gb . Why you take and add 2x8 instead 1x8gb ?

[@itggear]

The 8GB RAM that came with the PC is 2666 MHz, and I don't have another 8GB DDR4-2666 RAM stick. However, I do have 2x8GB DDR4-3200 RAM sticks, so I replaced the original RAM with the paired 3200 RAM modules to enable the PC to run in dual-channel mode. Thank you.

[@bighousemusic628]

what a great content now you need to start making these to ship they will sell like hot cake i hope dell amd and intel and nvidia take note in these for the new designs tiny pc is the future even with amd's NEW STRIX HALO APU and nvidia's new upcomming apu

[@itggear]

Asus has now released the NUC Mini PC with an LED screen on the case. I think the 3D printed case is not durable enough to sell since we just use household 3D printers to print that case. Some small parts could crack during installation, such as when tightening screws, so let's just share the 3D file for everyone to try. Okay?

[@bighousemusic628]

@@itggear great bro bro i looove cheap pc from ebay i have a lenovo mini a dell optiplex mini a hp mini and a custom ryzen gaming pc thanks to share your knowledge with us

[@utrippin7486]

is this gpu better than a gtx 1050ti?

[@fdgdfgdfgdfg3811]

yes its better

[@Spikyzzzz]

This channel is way better than ETA prime. +2 subs

[@worldexplorewithutsas5787]

i have same total brand soldaring iron

[@ABMgaming1000]

Bring back the dell optiplex 7060

[@KuanyshAmangos]

First

[@danielhulan3058]

Hey itg gear, do you have a discord group or is there a way i could contact you on discord?

[@danielhulan3058]

It would be about what we've previously discussed with the cad files and such. For the pc I'm creating.