How To Fix Android Tv Box Stuck On Red Light- Fix android Box not turning on

[@shaquuu]

Nice video. If you still have the original material, please upload that without music. It is REALLY hard to hear what you are saying.

[@Lenzwalters]

Sorry for that

[@tuckfrump849]

Your choice in background music is making it hard for me to push that subscribe button.

[@Lenzwalters]

how can I help ?

[@mudmagnet3249]

Analog rhythms man. Beanbag n acid music.

[@nohandleisavailable]

Good video, but holding the reset button is not nessecary, the pins being held while plugging in should be enough to get the device in loader mode. It's also good to mention that the tool doesnt work well on all ports, i tried two usb 2.0 ports and one 3.0 and got far only on the 3.0. The tool and drivers work well on windows 11 luckily.

[@francisdebellis7219]

I would really love to look at the entire video but I can not hear your voice for the James Bond music taking my full attention away from your content. LOWER IT PLEASE.

[@MaesterTasl]

Background music made it hard to hear you. Better without music so you can be better understood.

[@holivas2012]

Nevermind..I just slammed it against the wall!!

[@nathanielwoodewardantwigod5834]

Good morning Lenz Walters, I am glad for your help about re fixing the Android TV box red light stuck details. I am Nathaniel, based in Ghana. I have X88 pro 10 Android TV Box which Stuck at the red light. I need your help as how to fix it. What type of software and hardware tools will I need to resolve the issue with my box. Thank you for the help.

[@Lenzwalters]

hello. download the android flash tool and also the firmware for your box, normally the version is written some where on it most of the time.

[@nathanielwoodewardantwigod5834]

Thanks for the directive. Please can you send me the link to download the files, the android flash tool and the box firmware

[@nathanielwoodewardantwigod5834]

Good evening brother thanks a lot please can you please send me the link to download the Android flash tool and the USB cable drivers. Thanks once again.

[@Lenzwalters]

Subscribe To My Channel Full Tutorial How To Flash Your Box Here kzbin.info/www/bejne/Zn2lnnqpgp6sh68

[@colliscollis9150]

Thanks.. I got pass the errors via this video.

[@vinessensungaralingum5889]

My androidbox is Stuck on the blue light and it's not displaying anything (( need solution))

[@alexdavies7112]

Do I need to keep the reset button held AND the chip pins shorted while flashing?

[@leonardohill610]

you really need to turn down the music in your video s it is making it very hard to hear your voice clearly

[@mentarthaci4249]

my friend, how about the H96 max, cpu: RK3318, I have same problem with red light, can you tell me how to get starting that android box

[@arunbalukumar1982]

HI Lenz. i have got H96 Max+ recently. I have the same issue with the red light. when i connect the USB to the TV its working fine. But the wifi or hotspot is not connecting. please help me on this.

[@Lenzwalters]

hello did you try a factory reset

[@parthibratan9023]

Hi can you tell me which pin I have to short in x96mini box?

[@ZiyadMullick]

Hi bro..pehechana mujhe??😁😁

[@jagtapsantoshr]

*Sir, I have A95X A14K with Amlogic S905X Quard-core Cortex A-53 CPU, GPU Penta core mali-450 MP Ram 1 GB, Rom 8 GB No display and in dead condition what i can do for the same

[@gujarisantamanyugmai]

i am also looking for same processor.

[@modelbuilder68]

Mr Lenz Walters please tell me if i can use same process with box TX3 mini?

[@MarkCroft1975]

can you do a version with the 80s spectrum music i can't hear you? i am trying too root alfawise a8 tv box so i can edit system files that are read only

[@Lenzwalters]

Will do at some point subscribe for my latest video

[@caesarwafula8325]

NICE WORK BRO. HOW DO REVIVE X96 MINI WITH THE SAME ISSUE AS ON VIDEO. WHICH CHIP TO JUMP START?

[@TheSistu]

does it work on tx3 mini ? issue is that it doesnt turning on at all, only a red light at the back

[@omertalacosanostra2632]

Same here

[@kylenoel9307]

how about a TX3 PRO can i get assistance on that

[@nclrke]

I have a T95m android box and I'm hoping you can help me, do I need a certain software to do the process you did in the video

[@Lenzwalters]

email [e-mail] will see how i can help

[@paulrivas7453]

Hi Lenz nice video, do you know how to fix this same issue with the formuler z8 box can not find any info my remote does not work on the box so I used an other remote but without luck I also tried another power supply but nothing

[@abccbusinessdepartment2821]

Hey buddy...I hava a tx 3 mini where its getting power red light but not booting...not coming on at all....this happen after the nox frozw and i unplugged and plugged back in...i tried flashing but it only goes to 7 % and then gives a failure error....would your video with shorting out the pins work?

[@galamgamfamilytv2536]

Hi, do you have fix for MXQ Pro 4K which is stuck at RocketChip logo? Thanks in advanced.

[@nicholacaddick5861]

Me to

[@RICH78UK]

Hello m8 , You know how to unbrick A95X R2, red led on only. regards Richard from UK.

[@Lenzwalters]

Hi Richard I would try to do a tutorial on it.

[@martinward6422]

cool video friend do you still got the firmware for v88 box many thanks

[@Lenzwalters]

yes i think so its online as well

[@keithdavison7357]

Hi. I have the opposite problem. I have a h96 pro plus. That was bricked I believe. I got it booted back up with usb burning tool . My issue is now it won't go into standby, red light. When I hit the power button it shuts completely down and reboots from the start. I guess it's not a huge deal but I have other boxes that go into standby with just a touch of the power button. If I hold the power button I get the option to shut down. But both options are shutting down. Any idea thx

[@junardquinto2537]

what pin should i push in the a95x f3 air, amlogic processor

[@colliscollis9150]

Thanks... it worked... I got passed the errors via this video.

[@Lenzwalters]

you're welcome

[@chillouthere4056]

Thanks dear I’ve A5x max Do you got any idea how to unbrick !?

[@hgunawan]

Sir, i have MXQ PRO 4K with RK3229, stuck with android logo and can not be reset with toothpick whatsoever. Only red light is appeared no blue light. Any advise to hard reset? Thank you

[@Lenzwalters]

Did you try flashing it ? did you install the drivers ? Did it detect on your computer ?

[@hgunawan]

It detected with Androidtool v2.35 and RockChip_Batch_Tool_v1.8. However, i did not do flashing or other action as I am not familiar or understand how it work. Perhaps you may guide step by steps to flashing? Thank in advance

[@Lenzwalters]

I have a video on my channel its pin in the comment, that's a step by step video..

[@calebskeels5329]

Same here

[@paulg7392]

I have a MXQ PRO 4K , but there is no reset button. Even if I find the firmware that I am looking do you think that it will be possible to make it working again? Thanks

[@narflexel]

Will this work for superbox elite plus?

[@sinisajelovcic9104]

Hello can you please tell me if I should fight with my windows 10 to recognize scishion miniIII android box. Because I can enter recovery mode, but my problem is that box is overheating and goes from blue light to red after maybe 40 seconds after i connect to pc with usb cabel, just go to red and the red also vanish and shout down. I try to change the termal past but this past dont hold -stick- maybe i need to put another one. even if pc recognize android box overheating will shout down the box before flash finished. What do you think i should do, because i waist lots of time on this and thinking of giving up?

[@Lenzwalters]

is your box coming on the tv ? these boxes don't overheat the easily

[@afsanapatel4636]

This did not work for me. After downloading all the things needed on my laptop ie. android tool, ram etc. I was unable to get a firmware to be placed as a link on the android tool but it did not allow me to do so for my w95 box. Need more explanation. Thanks

[@latashabrown8399]

I have mxq pro 4K and it's stuck on the red light can you give me tips on how to reboot so blue light can come back on nothing and the machine is not burnt out I was told by technician

[@Lenzwalters]

I will be doing a tutorial soon on that box. Its maybe want to flash using firmware file

[@skyemoja6959]

mx10 pro 6k also stuck pls.. help me

[@CompassBD]

My Tanix TX6 wont power on. But the board is different. please help

[@travelvelogs991]

Helo sir i have x96 mani and i have same problam but my box show red light i conect the computer but the divice is not conectd .sir plz tell me wich pin s shoot in borad plz replie

[@9M2PJU]

Hi. Do you know how to fix bricked tx3 mini-A ?

[@modelbuilder68]

Did You find The solution? I have box TX3 mini,please help me if You can

[@9M2PJU]

@@modelbuilder68 I throwed it away and bought MI box s

[@techrevel5445]

In my tv box recovery mode is not sown and stock in dim blue led while pressing rest butten will this method work in such condition???

[@AkshayTanted]

Thanks a ton. It worked for my mxq pro 4k box

[@mellaneygoh3024]

Hi, just wanted to ask if your chip is 1644 (like in the video), because I have the same box but my chip is 1826 instead and this method didn't work for me :( Thank you!

[@AkshayTanted]

@@mellaneygoh3024 who is the maker of the chip I.e. is it rock chip, amlogic or all winner?

[@mellaneygoh3024]

Akshay Tanted I really don’t know how to tell ahaha, not a tech person, just desperate to fix the box

[@AkshayTanted]

@@mellaneygoh3024 mail me a picture of your box pcb. I will check that and tell you.

[@awordstephens936]

Good morning, I have listened to your instructions,,and am curious,,I have two boxes, one is an mxq -4k blue lights no picture and the other is a t95x only red light

[@Lenzwalters]

you can try flashing the one with red light and see if the one with no picture detect via pc and can flash

[@awordstephens936]

@@Lenzwalters how to flash it?

[@heartsoulcarclubgueroperez4689]

Having the same problem but on a superbox 2 pro. Do you know how to do it.Stuck on Lego

[@CristianGonzalez-ly8nu]

It’s easy to do the shortcut in this type of device “memory “ but my question is, if you know the way to doing on specific eMMC memory devices?

[@klsstephenson8492]

Do i have to have that software to help fixing the box

[@cibercafely5767]

GOOD WORK BRO, IN XT-MX4VR V01 PINS IS EQUAL, TAKE MY LIKE

[@tomaszdabrowski5087]

I have straight the same android box but my chipset is PFF58-10AL1706. Question is, the procedur is the same and pins the same?

[@TheRealKitWalker]

My h96 max+ started looping a couple of days ago, I wiped out its cache and did a factory reset, worked for sometime and the next day it wont turn on(red light). I am able to connect to pc without pushing the reset button, since I found out its in maskmode (all by itself). I've had success flashing the firmware however it's loader is somehow out of the picture that is, after successful firmware flashing, it stays in maskmode, that is if I try to connect to my tv, the red light stays on. If I try to flash via rockchip batch tool, it gets stuck and fails after "start loader fail". I'm guessing it's loader (kzbin.info/www/bejne/pIrXnJ2Ch7WkfdE this video gave me a hint) is bricked/fried, I can't seem to find loader/bootloader for h96 max+ 64gb version. I've also tried flashing via sd card, stays undetected. Have you or anybody got any idea for this situation? Any help will be highly appreciated :) Many Thanks.

[@nickwalsham91]

Would this work with my zgemma star s2 box its stuck on red light wont bootload or flash ?

[@harveysingh8690]

You didn't explain properly, how to link to the PC. My mbox don't do anything when I try to reboot with the pin.

[@terrywilliams605]

Yes, how to connect to PC and where do you find the software or firmware that you have on the screen. I understand the rest but you didn't describe the setup??

[@gustavolopez4676]

I was trying but I get this error = wait for loader star wait for loader fail someone knows help me

[@alimuddinsaifi4942]

i have MXQ PRO 4k 5G box with 2gb ram and 16gb memory. it was working good but sudden it stuck on blue light and android boot screen only. i tried to do hard reset but seems that reset button which is available inside AV slot is also not working. i have downloaded latest firmware and uploaded the same on my sd card with Burn Card Maker and then i tried to upgrade firmware with sd card after connecting my sd card into USB card reader and then to MXQ Box. but still it shows only android on screen and blue light in box. Any advise or suggestion please....????????? its Rockchip RK3066 . please help me. also my box do not connect to Laptop (window 10) i think this is due to reset pin not working.

[@sampoong7233]

Hi Lenz, i have a T9, its not booting up after a power trip, windows still detect it as unknown device but the AndroidTool doesn't detect it, can help ? I have tried pushed the reset button while plugging in power or usb cable, didn't work.

[@Lenzwalters]

unplug cable and try again

[@-JayHenry-]

Which pins do you short for Mecool M8S Pro L and M8S+??

[@Lenzwalters]

send me a picture of the board [e-mail]

[@kevinnivek6344]

I accidentally put 17V transformer on my H96 Pro. Now only red light. I cannot get androidtool to download. Can you provide instructions. Will greatly appreciate. Kevin

[@وحوشالعالم-ق4ب]

Hello my friend need the firmware for the m96x mini device. Many people are looking for a firmware program and have not found it if it can be answered by a fixed program and posted by KZbin and thanked

[@PankajDusad]

Can You please solve the same problem with H96 max .. I can't found that same components on my device..😭😭😭😭

[@johnnys25s]

Hy. Nice video. I have a T96_H58 and a Samsung eMMC board with a RK3229 chip. Can you please help me with those pins? Thanks.

[@brandon7037]

hi do you maybe have software for the MXQ PRO 5G 4k ZQ01-V1.3

[@Subway-st3vb]

hi lenz I havent try with the pc only with the tv. I let you know thanks!

[@Lenzwalters]

ok nice

[@jerryhill5134]

I have a T95Z Plus that will not boot, I have tried the hard reset holding down the reset button while plugging up with no luck. Any suggestions?

[@shamskt]

helpful...having same issue on Measy B4A S802, any advice

[@vaughnheynes5844]

I Have the same problem, with mygica atv495max, can you assist with it ?

[@MrPopinomandas]

Hallo. It still not Working. I had done the same thing which you explained with my tvbox V88 and still not working Any solution?

[@Subway-st3vb]

hi lenz if is no light at all the box is not good anymore? y dropp it accidentaly and the red light is gone it was conected when it fall from my hands

[@Lenzwalters]

is it detecting by the pc ?

[@nagarajuc6591]

Can you tell me how to add mic by soldering in this board

[@djdeethekingoffire4408]

What about the ones that don't come with a reset button on the box I have imperial box an the power light is just blinking

[@bswierko]

Hi, I have Transpeed T98 6K box bricked after SD card update during boot which was prepared with PhoenixCard. The box has no reaction at this time for power up. During trying to flash firmware with PhoenixUSB Pro it start flashing but stops at 62% with error couldn't download boot1 :( The question is: in my Transpeed T98 6K box is there the same chip and is there a way to connect pins to pass the whole flashing process to the end??? Waiting for your response my friend...

[@Lenzwalters]

Make sure you flashing with the correct version rom if you still get error send me a picture of the board i would see if i can help you out.

[@bswierko]

@@Lenzwalters yes I tried all available firmwares from 4pda.ru topic about my box. Could you give me email to send you photo?

[@tarunnagpal4778]

Sir, i have MXQ PRO 4K, stuck with android logo. Only red light is appeared no blue light. Any advise to hard reset? Thank you

[@alexandermacapagal2907]

How about my MI BOX no power at all?how to fix thanks

[@SobatBisnis]

Hello Sir, please help me, my own (Mxq Pro 4k 5G) with type: R29 mxQ 221 v2.2 blank screen. Red light. What should I do? Where can I find the firmware? Thx a lot..

[@andrelo87]

Hi. Can i do this if My TV box is in a bootloop. I can't Enter in recovery mode..

[@oktagonbthelyricalfarmer]

whats the software you used on the PC

[@Lenzwalters]

Check my video description. Android tool

[@Lenzwalters]

Here you go kzbin.info/www/bejne/Zn2lnnqpgp6sh68

[@klsstephenson8492]

Hi Lenz, how do i get that software, please help me my box is not turning on

[@poetrabetawy9982]

great jobbb...thankyou verry much,,,

[@doylanalexander1572]

I have a tx3 mini do you know how to fix those?

[@Vidya1939]

Hi what R U doing with pin 29/30 ,r u shorting them????. And What app u r using ( android tools)???? Pse give link. Tell me after doing this box will work here after???

[@Lenzwalters]

Hi using the 29 and 30 to get the box detected, if your box is bricked. download Android tool release v2.3 software

[@meganrouscc1947]

@@Lenzwalters If i have the IDB FAIL. i need to use the same pins ? the 29 and 30 to continue

[@meganrouscc1947]

​@@Lenzwalters Nice music, by the way

[@elextroman]

Hi Lenz , i have Android Box V88 4k (with chip SanDisk SDTNSGAMA-008GM) , it stuck at the red light and won't turn on. Is the procedure the same?Thanks.

[@Lenzwalters]

Yes. if its not turning on and the light is not so bright yes.

[@elextroman]

@@Lenzwalters I tried but nothing. It won't turn on and the red light is still bright..

[@SB-ok9yu]

Hey man, how about H96 Pro+, can you help with that

[@notpossible100]

Hi sir I want to know shortcut pin of alfawise a8 pro tv box. Can you help me please.

[@Lenzwalters]

Hi I am not sure if that box have the same chip. However this would be helpful www.gearbest.com/blog/download/alfawise-a8-tv-box-upgrade-firmware-pack-2965

[@frijj2000]

What software is it and does it still work? Thanks

[@Lenzwalters]

android tool release. yes

[@chitranshgoud]

hey.. nice!! I am faacing same red light problem in H96 Max RK3318 Can you tell me this problem's solution ? please

[@ayrtopend]

hi chitransh goud same here i have been at it for days trying to sort the same problem with but cant it seems to be a big problem with the h96 max .

[@chitranshgoud]

@@ayrtopend yes. Please tell me if you get something

[@cross7144]

Hi where can I download the Android tool?

[@mrcoolandroid]

Can you help me with a Noga PC Live TV box? I installed CoreELEC on it but when I tried to back to Android i get red light, can you help me?

[@hserg]

Please, I've the same problem with a MX10 box stuck on red light. Did you have a solution . Thanks

[@Lenzwalters]

Hi i have never came across this box. But if i do i will do a video on it

[@GranwillSmart]

Hi my tv android box was showing there is a update available so I updated it after update finished the box reboot and switch off , from then it's not going back on only showing the red light but not going back on

[@franciscoloera5235]

Will this work for a smart box s2pro? Stuck on the red light also...t.i.a

[@ayadcomedylovly]

Please have a problem with Android M96XMINI Do not know how to define it on the USB_Burning_Tool program Is there a way to set a reply please help

[@Lenzwalters]

yes i will be doing a tutorial soon subscribe

[@ayadcomedylovly]

Lenz Walters ok very thanks am waiting soon

[@micropopkiller9648]

Hello same problem here please share the link my tv box name mxq pro 5g please help me

[@ahmadal.aboodi156]

I have a H96max receiver and it's stuck on the red light how can I do like you did Can you help me

[@Umair_Qureshi_1]

Hi I have 96 Mini TV Box with same problem, plz guide me regarding the pin numbers...

[@TheOffGridTinyHouse]

what does it mean when the box is flashing red and blue ?

[@mcsascsu]

Hi, I have tried your methode and the device has found but it does not turn in green, it is blue in the tool the device port. It says: "Download Boot Start", then it´s flashing yellow and after a few seconds it´s turned red and in the window is fallowing: "Download Boot Fail" ********Upgrade Done Success fail Time ms******** Do you have an idea, what can I do? Oh by the way. My device is an MXQ 4K Thank you

[@andrewwhitfield5480]

This is for Rockchip only and I dont recomend doing this. If you have a reset button use by its self. If not or reset button is not functional then short the nand flash pins. There is a lot of important info missing from this video. Google Rockchip for tool and proper procedure. Amlogic devices are different.

[@Lenzwalters]

Bro some of the device have there differences. But if your V88 not turning on nor detecting and is bricked this is a method that can be done. Don't make sense do this method with a good android box.

[@tulkz]

@andrew whitfield: would you happen to know the solution to my tanix tx 5 pro, s905 box? It's blinking red light, then I use the usb burning tool to reinstall the firmware. It says sucessfull. But then it's still blinking red light.

[@shortbossent]

I have a MX PRO 4k box that is bricked how can I fix it?

[@bswierko]

You are saying that this is for rockchip only solution. Does the H6 SoC (in my Transpeed T98 6K TV Box) has it's own pins combination to fix flashing problem that stops at 62% in a bricked device ???

[@chrisgilchrist7214]

I have a m8s that the red light won't go off...my daughter plug the wrong adapter in it and I think it burnt out sum. How To fix it?

[@marto336]

Please I'm having same issues with my H96 Max+ (4K 64GB RK3328). Please what the the short cut pin? Thank you.

[@ajemayowa9317]

Were you able to rectify? Having same issue.

[@charlesfuentes6809]

"...you're going to need 3 hands to do this..." How many brains will it take to put the phone down?

[@frakenfish1]

Where did you get the android tool????

[@Lenzwalters]

google

[@howardbowen7086]

I have a h96 pro. Same problem, will not turn on Red light on in the back but will nor tun on. Any help

[@mudathirabubakare9226]

Please can u I send my A95xmax box pictures to I can figure out which chip to bridge

[@sinisajel7441]

Problem no. 1 is that box shout down after less than one minute, so its maybe not enough time to flash. Problem no. 2 is that windows 10 dont recognize box, so i can flash with this program.