How to wire up a smartphone app or an rf kit to your Fortin evo-all

[@Doc832]

I got my Evo All and T Harness for the 2022 F150, But the T Harness doesn't have the black 4 pin with locking tab so I am dead in the water. The video was excellent, to the point and sharp video. Thanks for the tutorial and workshop. Now it get a different T Harness for the application with all the leads. Thanks Again

[@deborinquen13]

May I ask where I can find the video on adding the diode so I can use RF kit and the Link-R together?

[@B1NARYP0Ny]

Do you have any videos that show how to add both a Fortin 2 way RF kit and a Linker-LT1 on a EVO-ONE?

[@Hector-cn3rv]

Honestly, Id rather just plug as instructions say. Not being lazy just that all wires will be hidden anyway and alot faster hook up. But great video nonetheless!

[@robertdrinnon4969]

i have a direct remote start on a 2012 f150 can I put a longer range separate remote or add it to my cell phone I appreciate the help jus let me know

[@soldier42mp92]

Very straight forward .. it really cleans up everything

[@Hector-cn3rv]

What are the programming steps from linkr-LT2 to Fortin Eval-All? I have GPS and Battery meter but cant START - STOP - UNLOCK OR LOCK

[@adamjensen6376]

I have evo one and I want to have a antenna onto it for long range so that I can do auto start which one should I get.

[@artramirez3506]

Man, thanks so much for this video. I have had a Start-X Evo-All that I added both the RF remotes (single button) and the Linkr LTE device to it and could not get both to work. Thanks.

[@artramirez3506]

Whelp, I tried installing the diode in the white line with the band facing the antenna on my windshield. Still no luck getting the factory fob, RF remotes, and LINKR unit to all work. I decided to just disconnect the RF remotes and keep the factory fobs with LINKR LTE unit working. I have my phone with me when out and about anyway so this will work just fine.

[@joshymcdaniel9233]

@@artramirez3506 u can buy an additional harness that acts as a y allowing u to hook up all’ but u r correct if u have factory key and cell phone app why would u want or need to carry an extra remote’ cell phone is an unlimited range “remote” u could open or start car from 1000k miles away honesty it’s pretty amazing and only $40 a year’ An upgraded key fob remote maybe goes 1k feet’ Get the linker kit if u have forton EVO one’ hands down so worth it! Got mine on Amazon for $100 ish dollars for a 2016 mazda b4 pandimic think it’s like $150 now but hands down so worth it’ u can unlock/ start car from anywhere and other uses such as with mazda smart key u can’t “lock car doors” while engine running’ In 2 years its only not worked 1 time’ due to towers being down 100% an awesome plug and play option for EVO one remote start U can but it’s a pain u open driver door roll down window shut door reach in hit lock auto roll up window lol’ but now u have to take the key out of the fob and unlock keyhole to open door….. Unless u have linker app boom hit unlock and open’ i bro g my dog everywhere so leave car running so linker app makes it 100x easier than digging for key fob’ I was nervous it would be crap but hands down again I’ll say it was worth the $100 add on and its $40 a year or like $99 for 3 years

[@perrygoutsos8068]

@@joshymcdaniel9233 have a link to where I can get this harness?

[@TruckDriver326]

I'm using a Excalibur AL18703DB. I'm trying figuring out the remote start on a manual truck. International 9400 I. it a starter solenoid on fire wall.

[@robertdrinnon4969]

I have a 2012 Ford F-150 it has a direct start system on it now can I buy a Evo all with everything I already wired together in it the phone app everything will that work on my truck

[@aldee3018]

i saw your video and i figured you're the man to ask. i have a prestige 997z alarm installed with a FlashLogic (FLCAN) bypass. i just ordered the CARLINK6 (ASCL6) 4G version. it came with 4 wire harnesses 3 short and one long. my question is do i need the 3 short wires to make the system work?

[@2gunslefty]

What are the yellow and red wires for if the car link gets power from the remote start? Do I still have to ground it? Thanks

[@aldee3018]

just a quick question had the carlink6 added to my prestige 997z alarm system but it doesn't let me know when the doors are opened or when the car gets hit, any help will be highly welcomed.

[@kingjpl]

Does the fortin evo one work with linkr 2g (I'm in the uk)

[@jefferysteinborn]

In this video you bring up the "hideous adapter" but when I purchased a kit from you it comes with this "hideous adapter"!!! confusing a bit much.

[@EarlSaunders-eh2th]

Very confusing I'm so frustrated as well it makes no sense.

[@nickerisman2715]

can I have the link to LOCK, Lock, LOCK , RF and Mycar all in one

[@MrAldrin120878]

How can I get one for my Honda Pilot 2011

[@cruzenforabruisen6368]

Hello. I have the Crimestopper SP-502 in my car and I was wondering which one, between the Linkr LT2 and the Car link ASCL6 would be better. By the way, I was looking at that 01 harness wondering if there was a way to cut away the unnecessary wires... Thanks to your video I know how to do it... Thanks!!

[@Dj1Kreationz]

Either one will do...they are the same

[@Pedro_Martinez83]

Will This method work on a 2019 Camry LE? I am using an evo?

[@TruckDriver326]

I look to hook up remot start on a manual transmission truck. You have any videos on that.

[@Lesscoelectronics]

yes, search manual in my channel's videos.

[@wilsonguzman9382]

hello friend I would like to know if that module takes a sim car

[@EarlSaunders-eh2th]

Hello I have the Fortin evo all and the linkr lt2 can I follow the instructions on this video to install my kits.

[@EarlSaunders-eh2th]

Gimme a thumbs up if yes you don't have to write anything it will let me know I'm good to go please and thanks.

[@gregorycampbell8101]

Could you just swap blue with white by re pinning at the connector instead of cutting the wires?

[@Lesscoelectronics]

I guess so, but its so small, youll probably spend more time poking yourself to death

[@mcelvnm]

Can a LINKR module be plugged into a Flashlogic FLRSBA?

[@Lesscoelectronics]

yes

[@HAMMER_2.2]

Do you know if Excalibur has any updated remotes coming out soon? My build is about 6 months away from when ill actually buy the alarm system, but i have to choose one now due to what i am currently wiring uo. The Excalibur works with my push button start kit, because it doesnt require stepping on the brake for remote start takeover. But if something new will be out in 6 .months, i would rather take the newer product, if that makes sense. Thanks man,

[@Lesscoelectronics]

The new stuff is all coming out this month, it's always this time of year.

[@HAMMER_2.2]

@@Lesscoelectronics thanks! Ill keep an eye out!!

[@masterofnone7846]

Where is video on how to add diode to this project?

[@salsa5115]

I have an Evo one with rf kit what do I need to connect a LinkR with the rf kit together?

[@Lesscoelectronics]

get this: www.ebay.com/itm/362204149215?hash=item54550cb5df:g:f7UAAOSw8w1X4vAk

[@Dj1Kreationz]

Tried this method but not sure why the evo all will not accept or recognize ascl6....H2 - fortin 2 is selected as well....🤷

[@Dj1Kreationz]

Just to confirm...you will need the 1 pin to 3 pin harness that comes with the ascl6 in order for evo all to recognize when pairing..like said in other video the 1 pin to 3 pin harness steps down the voltage to 3v...from doing whats demonstrated on this video will have no transformer to step down voltage, in my case the evo all was not able to recognize the ascl6 👍