Lesson 02/10 - Basic SIP Design and Engineering - BEST Program

[@konstantinegorov1776]

Спасибо за подробный урок)

[@SIPAvideo]

Спасибо за просмотр

[@davidparker2173]

I wonder if a SIPs factory could assemble something like Concave Mansard roof panels.They seem real good, and appear able to pinpoint anything. Keep amazing me.

[@Arthurmoodley]

Hi I'm based in the UK and need some advice, I have used a manufacturing company that had erected my sip man cave, roughly 6.7m (w) x 4.88m(d) and 2.5m high they used an eps system with 122mm panels, the flat roof uses 600 x 2400 panels however the company has joined these two panels with a 2x4 c16 timber, to span 4.88m for the roof the roof also has an openings for a 70kg skylight, I am worried once I put the skylight in the roof might not hold the skylight, as the max span of a 4x2 with a point load of 70kg is roughly 1.7m, can you advice please

[@andrewcook1258]

How did you get on with your build? Remember that the splines joining the panels are glue and screwed to form a composite structure much stronger than just the splines themselves. If you were talking about a joisted roof using 4"x2" joists then you would be correct, they would not be sufficiently strong but a SIPs roof is different! Happy to talk it over. (Sources: I work for a SIPs processor and housebuilder in Scotland)