When I discovered blueprints existed in factorio it blew my mind. Can't express how excited I am to get them in satisfactory too ❤️
@DrLootCrate Жыл бұрын
I should probably go back and try factorial at some point…but I still have plenty of satisfactory left in me
@joshuachong5204 Жыл бұрын
One cool way I can think of using this blueprints is to make a 10 foundation circle, and only blueprinting the edges, so you always have a useful circle edge to build off.
@DrLootCrate Жыл бұрын
I have never actually finished building something circular. It was so fiddly that I lost interest in doing it, so maybe blueprints will finally get me going round?
@khaos298 Жыл бұрын
I cant wait for this, cause the way I now build is literally like building layers of a factory at a time so having them be kinda cookie cutter BP's, it makes it so much easy.
@DrLootCrate Жыл бұрын
It will definitely be a big time saver for a lot of us and I am looking forward to it too!
@touchthesun Жыл бұрын
Blueprints were a complete gamechanger in Oxygen Not Included and Dyson Sphere Program, my other favorite factory sims before Satisfactory. I'm excited for blueprints, and I really REALLY hope they introduce automation signals after this
@DrLootCrate Жыл бұрын
I really need to try out those games. I am sure that I would love them.
@touchthesun Жыл бұрын
@@DrLootCrate Oh yeah, prepare to lose a week or three if you start playing them. Those 2 plus Satisfactory are easily the Top 3 factory automation sims in existence right now.
@bndoug6672 Жыл бұрын
DrLootCrate, once again another excellent, informative, and inspiring video. Thank you for the great ideas and designs. Keep it up!
@DrLootCrate Жыл бұрын
Thanks my friend! Always good to hear that you liked it.
@BananaNationTV Жыл бұрын
to be even more efficient, make a blueprint of the first layer and use that blueprint to make more layers in another blueprint!
@DrLootCrate Жыл бұрын
Dude! I hadn’t thought of that. Infinite stacks! Sounds like I have a good idea for another video
@martinspukitis5059 Жыл бұрын
I tried something like this and the game immediately crashed. Twice.
@DrLootCrate Жыл бұрын
@@martinspukitis5059 in my latest video, I successfully used a blueprint in a blueprint design, but it was only a 4x4 foundation platform
@blind8478 Жыл бұрын
Concerning the Smelter Setup: I did almost the same thing but with 26 Smelters (8 bottom, 8 middle, 10 top) Having only 4 on each side bottom and middle leaves you with enough space to bring down all the ingots to the bottom again. This way I can put 780 ore in and get all 780 ingots out on one output, a perfect MK 5 belt setup
@DrLootCrate Жыл бұрын
Very nice! I actually did this video before the blueprint machine was out, so I wasn’t totally sure where we would be able to place things on the edge. I couldn’t test it. Your setup sounds awesome. If I make another one, I will do it that way
@mywrld1517 Жыл бұрын
I have always loved your vids 😊good job getting to 1k+ subs!
@DrLootCrate Жыл бұрын
Thanks Worldie. Cheers! 🍻
@cranberrysauce61 Жыл бұрын
probably should of put a merger on the output of the manufacturer for expansion reasons, but all in all, blueprints like these will really help me since i have a tendency to not really utilize vertical space in designs.
@DrLootCrate Жыл бұрын
Yep. Don’t tell anyone, but I actually forgot to do the output of the manufacturers. 🤐 I agree that this will encourage a bit more verticality. I am looking forward to making some more designs with this in mind
@MyFuzzyAfterlife Жыл бұрын
Your vertical smelter and assemblies are fantastic, built both in my world today ❤
@DrLootCrate Жыл бұрын
Thanks Fuzz. Glad you liked those designs and there is more where that came from on the way!
@MindResonator Жыл бұрын
Great video. Nice concepts and designs in prep for update 7 release on Tuesday. Have you thought about input and output pass throughs both vertically and horizontally at the exterior of blueprints for expandability? -Like Snutt did in the demo. I'm considering having input mergers and output splitters on corners of my blueprints for universal connectivity. Looking forward to seeing what else you come up with 👍
@DrLootCrate Жыл бұрын
I am digging the idea of the a fully universal modular design. If you have been watching some of my other vids, you know that I like to build vertically from time to time and I am looking forward to making vertically stackable tiles. You will have to sacrifice raw output capacity to be more flexible but that is definitely ok. I am sure that most of my blueprints will be used for convenience or aesthetics anyway.
@internetbard4384 Жыл бұрын
My only worry is that you won’t be able to modularly overlap previous blueprints, like if I wanted to lay all machines and splitters first and then put all the belting in over the top. I wonder just how cookie cutter these chunks of factory will have to be.
@DrLootCrate Жыл бұрын
@@internetbard4384 it will be interesting to see the nitty gritty on how it all works tomorrow
@CTGaming306 Жыл бұрын
Great videos. Keep up the great work. Can you boost your audio a little your videos are a little too quiet and hard to hear without headphones.
@DrLootCrate Жыл бұрын
Sure! Thanks for the feedback
@DrLootCrate Жыл бұрын
If there are any other of my videos where it is loud enough for you, let me know with a comment there. It will help me check my levels
@Tyuyamunite Жыл бұрын
Awesome video and designs! Perhaps a good incentive for future patrons would be to provide your blueprint files for download on patreon. Looking forward to more!
@DrLootCrate Жыл бұрын
Thanks buddy! I was thinking the same thing re: Patreon, but keep it cheap as possible
@cdm96247 Жыл бұрын
On the Manufacturer build you could put 4 floor holes on the m levels for feeding and have lifts attached to feed the inputs and do the same on the second floor as the first with the stacked belts just reversed to feed back to the same location as the first floor started at, then when pasting the blue print you could just lay the next level foundations and the floor holes would line up to have a serpentine config for every 2 levels. Does that make sense? Just paste as high as you can support with feeders. Excellent ideas loving the content.
@DrLootCrate Жыл бұрын
I think I get it and could possibly make something like that work. I have definitely been trying to wrap my mind around vertical designs that will stack nicely and will probably be trying to get there in a near future video
@cdm96247 Жыл бұрын
@@DrLootCrate Looking forward to it. The way you set them up gave me some ideas as well. Gotta back up the save and re add experimental.
@Fieldsonyoutube Жыл бұрын
I appriciate you squeezing the layers to get max production however I think even one level with lots of detail would be far better just my thoughts great ideas though
@DrLootCrate Жыл бұрын
I think I agree with you. Once I am done with work (darn these full time jobs!) I am going to get on experiment with the actual machine. I think individual stackable layers will be a way to go
@zazethe6553 Жыл бұрын
I'm more interested in blueprints for road designs, complete road section with street lights,rails, markings and railings. or comolex railroad junctions and roundabouts. Or curved road blueprints.
@DrLootCrate Жыл бұрын
I think you should be able to pull this off for some extent. I think there is enough room for the road stuff at least. The rail stuff will mostly be too big - a 4 way train intersection is 6 by 6 I think and wouldn't fit in the cube.
@justafactoryworker2543 Жыл бұрын
The one thing I wish Coffee Stain would do is make the BP thing 5x5x5 instead of 4x4x4 Would make a lot more possible
@DrLootCrate Жыл бұрын
It definitely would increase possibilities by a lot, but I don’t mind the current size. I think it is a good balance to make you think a little bit about squeezing it in.
@oswynfaux Жыл бұрын
Nice video, worth a subscribe
@DrLootCrate Жыл бұрын
Thanks and much appreciated!
@sijam2m59 Жыл бұрын
Cool
@DrLootCrate Жыл бұрын
Thanks bud
@TSPxEclipse Жыл бұрын
I feel like you could easily fit another 3 assemblers in there if you kinda zig-zag them.
@DrLootCrate Жыл бұрын
I had the same feeling. I screwed around for a while and couldn't find a way to do it without clipping. It is a little tougher than it looks with the light sticking way out of the top of the machine if you don't want to clip (which doesn't really matter, but I like to not do it) I haven't tried again since, but I almost guarantee that you could fit more in there somehow
@mortenlundorff-hansen1843 Жыл бұрын
I simply can't wrap my head around nuclear power. Can you make a dummy tut that is easy to follow, Which explains in detail what to do please. 🙂
@DrLootCrate Жыл бұрын
I’m right with you Morten. It is a pretty daunting process. I am planning on a nuclear video, but Coffee Stain was talking about changing a key alternate recipe (removing beacons) so I was holding off until they did it. But it has been a while with no update and I need some power!
@mortenlundorff-hansen1843 Жыл бұрын
@@DrLootCrate I'll look forward to that 🙂
@briankerr4490 Жыл бұрын
Are you able to make a blueprint file to download. great video
@DrLootCrate Жыл бұрын
Thanks Brian! My saves and blueprints are available to my Patreon supporters. Check out the link on my channel page if you are interested. If you aren’t, you just got free step by step instructions!
@JDobermann Жыл бұрын
Can you put machines head down from the ceiling?
@DrLootCrate Жыл бұрын
Wouldn’t that be sick Dobes? Sadly you can’t, but there are ceiling mounts for belts as of today
@khazul0 Жыл бұрын
Really looking forward to blueprints, but 32x32 is FAR too small. Lets hope a mod will change it to actually be a useful size so it can be used for refineries, coal, oil gens, rectors etc.
@DrLootCrate Жыл бұрын
You can actually fit 3 refineries in there because it is only 31m tall and 10m wide, but I understand your point. One of the most tedious things to build is a huge fuel plant, and this won’t help at all
@Locomotor1979 Жыл бұрын
max layer is 3smelter layers whit a total income of 900Iron ingots pm
@DrLootCrate Жыл бұрын
Yep. Up to 2250 with overclocking if you have a lifetime supply of power shards
@BobBob-it7tp Жыл бұрын
first!! woohooo!!!!!
@DrLootCrate Жыл бұрын
Quick on the trigger Bobby! Just like I was making a video about blueprints!
@MetalKid007 Жыл бұрын
Except if you want maximum efficiency, you should be using refineries for pure ingots...
@DrLootCrate Жыл бұрын
Max output in terms of what you can fit in a blueprint…and output per ore isn’t the only measure of efficiency. Using fewer machines and saving setup time is efficient in my book. But if you are trying to max out the map, that is a different story.