Let's Spray - Rustoleum (True Navy) Paint using an Automotive Spray Gun

Intercoat Clear
autopainthq.com/products/inte...
AIZOME Blue
eyecandypigments.com/products...
Platinum Clear
www.ebay.com/itm/266740774402... Clear
autopainthq.com/products/inte...

[@GTsPerformance]

If you're looking for pearls, flakes, or colorshift pigments for your next project, be sure to stop by eyecandypigments.com?sca_ref=6309977.8iGKD4as0o

[@00giftOfgame00]

Quick tip; you’re suppose to turn your gun upside down before you spray. You pull the trigger until the liner crinkles up. That way if you spray upside you’ll have no issues. The 3M guy came to our AutoBody class to show us how to use the PPS. Almost 20 years of painting experience here. Also you turn the spray can upside down and spray until nothing comes out, they punch a hole in it. OG showed me that in the 90’s. Love the vids man! Respect from Southwest Texas🤙🏽

[@GenuineRage]

rustoleum 2x/painter's touch use an any-angle spray tip that doesn't let you tilt the can upside down to clean the tip. the idea is that you can be underneath something and keep spraying or use the can in hard-to-reach areas. the only way to keep the tips clean is to remove them and clean them by hand/soak them.

[@ericlomax5135]

True true 30 years here and I always turn my pressure to 26 to 30 and turn my gun upside down to spray at first gets all the extra air out

[@00giftOfgame00]

@@GenuineRage thanks for the pro- tip bro!🤙🏽

[@00giftOfgame00]

@@ericlomax5135 yeah I also spray at about 2 bar. That PPS also saves alot of material, you’re just about able to spray every drop!

[@SteadyWorksGarage]

Bro you got some bob ross vibes going on

[@barnes29510]

We used to do this in the 80s.... Turn the can upside down to release all the pressure from the can....then puncture the can to make a hole + another hole. This way you can pour the paint out with no need to spray....

[@patrickisswayze3446]

Been doing this since the mid 2000s. Especially with things like pb blaster cause the aerosol would always run out before the can was half empty. Saved a lot of money and have a whole pile of marbles lol

[@wesleypulkka7447]

GT, beautiful color and great outcome! Thanks for showing the way to lower cost auto painting!

[@donnamoll3159]

Impressive skills and results in the paint.

[@Jack_Ratchet]

Great color choices

[@gregturnbow7089]

That was a great color, I'm partial to blues and deep reds but that blue was awesome!!

[@stevec5657]

I've been emptying old spray cans into my PPS cups to use on practice panels for almost a year now. Cheap, works great and it's fun to blend some of them. Thanks for the video 👍

[@-MacCat-]

Nice job! Thanks for sharing it.

[@DoesItTho]

Dude! Looks great, thanks for the experimentation for us beginners! Cheers

[@CraigFize]

That is awesome. Great job

[@mustangnotch]

Looks amazing!

[@davidniebeling77]

Great video. Your work has really inspired me!

[@terrormisu]

Makes me want to paint now 😄

[@bolingray]

Great work my friend, love your videos

[@johnwerner7194]

Beautiful job

[@iownalawnmower4942]

Wow that looks really good 👍

[@goochi5544]

Good work. Beauty comes out of the end of the spray gun.

[@BigBlueMotors]

Thanks for doing a pearl with the intercoat. It came out great. It looks like Lemans Blue that Chevy used on many models. I am looking at something similar, but adding very fine silver flake to the pearl for my Isuzu Pup.

[@tommyrod2011]

Looks great!

[@branchesofYAH]

You always do nice work, it's inspiring me to paint my own car.

[@davidaguilar5070]

Real nice for spray paint

[@martymcfly3986]

great video man, you really know your stuff

[@ericlomax5135]

Looks good my guy looks amazing great work bro

[@streamlobby2341]

You are awesome keep up the good work. I love your content

[@shaineriches4369]

A great video brother ! Thankyou 🙏🏻🙏🏻

[@RobertFredman-ld6kc]

Looks great

[@bowtiebum82]

Love it it looks like lemans blue by Chevy in the late 60s early 70s

[@i8ntnuts]

That’s exactly what I was thinking. One of my favorite colors. I’m thinking I might wanna get some of that blue pearl

[@wjye]

That color is great. It’s really close to the metallic blue that Ford specifically made for the NY state police Crown Vic’s. Love it.

[@whois8042]

Hey man thanks bro!

[@Mytriumph650pre-unit]

Looks great and its economical especially when doing a small job such as a motorcycle,

[@Etron49]

Nice job,I preferred it on the black base,bu the blue is great too.

[@charlesgraham9954]

back in the 80s we would turn the can upside down and just let out all the air, these new cans are on another level, my point is we just drill a hole in the can after the air was gone. now they have tips on the cans that lay a wider path. the gun still is better. thank u for the video, i know the time it takes to film and edit.

[@lamartaylor8922]

That came out nice 4sho that looks 🔥

[@dbc105]

Man that is nice with that pearl over it.

[@AlxJrz401]

enjoyed the upload bro! great video!

[@dougking7331]

Killer Dude! Nice!

[@kennymcquinkiss8292]

I've used that can paint in my spray gun before I set the can up in a vise and poked a tiny little hole in it with a nail in the top. I poke one on each side let all the aerosol out and then the paint flows out nicely. Another way to do it would be just turn the can completely upside down and spray all the heirs all out without losing any paint and then poked a couple holes in it when it doesn't have any pressure and then it dumps out really nice

[@terrysibley9636]

Very cool.

[@85candanoza]

Awesome. I'm about to spray a similar set up. But on a Honda blue with AOI HI BLUE from eye candy pearls .

[@totallybonkers]

Wow, that ultra flat looks like it laid down really good for being from a rattle can. Sprey paints are getting good now days.

[@shannanbegley8189]

I’d love that look on my Tacoma!

[@My-Nickel]

AWESOME THANKS

[@rayrobinson3015]

Nice!

[@brokentoolgarage8609]

Nice job! I like the technique to use the spray can in a paint gun. There are times where I can only find a color in the spray can.

[@Greybuiltracing]

You got my subscription . And a like for this informative video . Ty

[@inthelandofmorethansmall7582]

I had NO IDEA this was even possible! I had wondered before, but I figured I'd be laughed at if I asked. Wow! Just wow... Thank you for teaching me something new today!❤

[@rickmorgan4323]

There are videos on decanting aerosol spray paint. Works great I use mine all the time.

[@samuelfoote9135]

I swear this fender will now last a thousand years 😂, how many layers does it have

[@laurensiemens1436]

That is so cool. I didn't think you could do that. Thanks for sharing Can you do the same thing with clear coats

[@jonelliott4985]

Olla mi amigo. Bro that paint looks good not over the top laity just subtle colour blend I like it.. tip for future reference if u gonna use a rattle can debase the can first then cut it and pour the contents into your sprayer cup of done it a few times when I only need to do a small section saves buying a whole lot and mixing it with the thinner an what not cos it's already mixed into a very thin paint... but again awesome job I love the subtle colour gradient light to dark stay blessed bro

[@roadkillstash3974]

Im here to learn. I'm horrible at body work and I'm on a tight budget. Haters gonna hate. Arc orange and a 👻 gold or red might be a nice combo. I used your code btw. Thanks

[@roberthaslip]

Galactic ghost blue over a bright white Rustoleum, would love to see that!

[@aaronfuksa2047]

Rusto Bright white?...well matte white is not bright...a off white. Looking for a new bright white,

[@i8ntnuts]

GM had a white white on their older Corvette

[@asusreviews]

Nice job. The cans of spray paint are like 2/3 propellant so you are not left with much paint after that.

[@Richardskull]

Love to see results spraying over primer! Grey,red,black! Would be super helpful to do a small panel! Primer then clear coat with a few different shades! Set out for several months! See how it holds up! I’m thinking the clear will make primer hold up fine! Why spend hundreds of dollars for paint? If not needed!

[@ericlomax5135]

I have 3 Sata 90s and i prefer the habor freight guns to be honest. The spectrum kicks ass

[@DannyRayburn-mn3tx]

Dang man, you are a legend! Such a gorgeous blue! I have a 92 Lumina that is gray, faded with minimal clear coat. I wonder how it would do to sand the remaining clearcoat and respray it with the eye candy and the clear. Or would I need to do a base coat like you did here?

[@lawerancelanham]

Idk how I got to watching this. 😂 But...as I do I keep looking over my shoulder at my 05 Ram. That blue looks a lot like the Atlantic Blue Pearl that's on it.

[@EddyB78]

I like the blue. But thinking of something a lot darker. Almost black and in the sun blue.

[@spotthedogg]

I think one of the design advantages that you’re missing is that the cup liner is supposed to shrink down giving you no interruption in paint supply when the gun is inverted or semi-inverted ✌🏻 I’m also wondering if you pull the paint out of the gun between coats if it’s not drying in the tip

[@ulichy5]

Drill a small hole on top of the can to release the pressure it’ll be easier to fill up the cup

[@user-fh9ul7bk4b]

It will let out the propelant

[@motov8-garage832]

As soon as you puncture a hole in a new spray paint can it will explode paint everywhere .. done it a few times myself. ..😅. But you can just turn the can upside down and spray out all the pressurized gas then drill a hole. Same process as clearing the spray paint tip but just totally emptying the propellant.

[@Whatsthedill_ENT]

​@@motov8-garage832 facts! I have tries the same thing

[@mxfalcon5321588]

Dam bro it looks bad ass. Can you do a black base with dark charcoal gray

[@bobbyc13]

I wonder how turbo black paint would do as a base since it already has that wide fan.

[@jims812]

I like black base best.

[@MaXpeedingRodsCoop]

cool

[@javierochoa432]

Can you please do a white with a blue pearl?

[@Hanky_Bannist8r]

It's really eye opening to see how much paint we get for 8-10 bucks per can, it's hardly any. Have you tried another brand like vht or Duplicolor ?

[@beethao5578]

U should add a little purple in it

[@Spiritof_76]

That spray paint is an enamel, correct? All of it is either enamel or lacquer unless it has the button to push and release an activator as far as I know. Do you know if (besides the propellant) spray can paint has anything in it that makes it any different than cans of inexpensive enamel or lacquer? Is it just pre-reduced? I also don't understand if some is labeled "oil-based" enamel whether that is different than any other.

[@chrispete9355]

Nice what size compressor do you use with the hte spectrum spray gun?

[@glennkimsey3957]

I got a question wat happens if you put the eyecandy in the paint as well as the clear

[@barnes29510]

..,.by the way, has anyone seen the new color "luscious blue". It's expensive but omg it's beautiful!

[@BOOSTJUNKY]

Why not just buy the rustoleum quarts and dilute it with spirits or thinner whichever one it is

[@Pallidus_Rider]

👍 😎 🤙

[@ray6808]

What type of set up did you use? As far as compressor size? Psi? And air hose size ? Regulator

[@user-ml4up3ri2j]

Hey buddy that blue is nice would you do my 66 Chevelle?

[@3gcraftsman]

How long does the rustoleum base coat have to dry before you clear over? Thanks

[@mattcasoni]

I would wait two weeks but who knows. Spray paint off gases for a long time

[@gladememmott3001]

Within 12 hours... Any longer then it needs to be sanded or scuffed.

[@mattcasoni]

@@gladememmott3001 thank you

[@DURRIESVISION]

Eye Candy has a new blue called 'Umi Blue' can you show the effect please

[@gatblau1]

Is that car damaged by dogs the same one I saw a video on KZbin about? Two pit bulls chasing a cat and they tore up the front left fender of a car. Maybe that happens more often than I thought.

[@TheVillainsProjects]

Have you ever tried adding Mica powder or eye candy to base coat in order to change the color a bit, or is it STRICTLY for clear coat?

[@GTsPerformance]

Have you seen the gold video? kzbin.info/www/bejne/ppzOkmyjg7uKes0 I added some pigment to the rustoleum base (5 grams to 7oz.), but it didn't seem to make a difference. Maybe the colors? or just needed more?.. 🤷‍♂️ I'll try again. The pigment is best used in an intercoat or a clearcoat, so it floats on top of the base. Adding it to the basecoat will lose a lot of effect because the basecoat coverage is too thick and covers the pigments. You could try as a control coat. After the panel has a wet coat, continue spraying at a distance so the pigment has a longer time to land on top of the paint. But then you're wasting a bit more material. I recommend an intercoat and then clear for the best results!

[@johnkirchner]

When using just spray paint you should really get un adapter and a chisel tip instead of the stock tip.

[@shannisgeorge]

Better over black

[@anisabdelmalekelosmani1143]

Please ! Bro help me try ro get the color of the porsche 992 shark edition 2022 its like a two tone white / navy blue and ghost blue pearls over it but id like you to try it

[@sshyshy6097]

hey where are you located and how much do you charge for a paint job

[@glowstone9848]

Chester ????😮

[@tossedsalad5532]

I wish you would ask a auto qrecker to Donate a small truck lid to use as a paint canvas

[@budzz90]

kind of similar to subaru world rally blue paint

[@rudyflores9395]

Where do you get the cups for the spray gun ??

[@GTsPerformance]

Harbor freight has refills.

[@rudyflores9395]

@@GTsPerformance kool thanks he comes fathers day if I'm lucky lol

[@GARAGE_VLOG]

Mano deberias hacer videos en español , me encanta tus videos pero son ingles

[@CarMotiveYT]

what kinda of compressor do you use?

[@GTsPerformance]

I'm using a 29-gallon central pneumatic from Harbor Freight

[@MrSticks9999]

All these videos like this are ridiculous. The "base" you are using is not a quality base to put clear over, or spend teh time you are spending here.. Show me what it looks like 1 year later after being in the sun.

[@stevewayne3676]

Why you watch them if you have such destain for the way he chose to paint? Having a bad day need to be a keyboard warrior because in real life you don't have the big boy needed to do so 😅

[@ledheadkustomplastic3442]

HOW MUCH MONEY IS RUST-OLEUM PAYING ALL THESE KZbin CHANNEL TO TELL LIE'S ABOUT THEIR PRODUCTS?? IT'S GARBAGE AND GOING TO MAKE THE NEXT PERSON WHO PAINTS THAT VEHICLE HAVE TO DO 5 TIME'S THE WORK JUST TO GET THAT 💩 OFF AND BE ABLE TO PUT A GOOD PAINT JOB ON 🤬. WTF? SORRY but someone has to tell the truth!!!!

[@GTsPerformance]

I'm not sponsored by rustoleum! 😂 It's just a good paint for people on a budget. I'm not saying to spray it on a late model car, either. But there are lots of people who find great cars on the marketplace that could use a hand. Why take it to a bodyshop that'll charge you over $3k when you could do it yourself under $100? Real question? Rustoleum is good paint, I recommend it!

[@hswing11]

DENT SHOWS POOR BODY WORK AND DIRT IN THE FINISH