HOW TO MAKE A 3D PRINTED R2-D2 | PART 1: THE DOME

[@MightyJabbasCollection]

I think I got some flashbacks from sanding my own dome watching this. Good luck with the rest of the project

[@LethalEngineering]

Thanks! I really enjoy your videos!

[@jeremycbarnhart2305]

Beautiful! Future reference for the blue painted pieces; Spray with metallic and dry forst, then apply the blue coats.

[@cocoweb2663]

Hello, just watched part 1 of your video, it's awesome. But were is part 2. I wan't the end of this project :) !!!

[@stumanson2730]

kzbin.info/www/bejne/npzOhJSdidh_jrs There is a list of ALL tutorials here

[@alsoabr]

Nice work man, thanks to share your knowledge, best regards from Brazil.

[@jamiepeterson1981]

I love your videos man, they are always really informative and easy to follow but also quickly paced and to the point. Perfect for someone with my attention span lol.

[@jakeyb]

When you gonna continue this project? I'm curious to see how it looks

[@djmikolajczak]

Any more vids to come? There's not to many r2 builds on KZbin that went in to the details you did. Nice job

[@LethalEngineering]

Yes...I just need to make it a priority. If I don't have a Part 2 video done within 2 months I'll pay you $100

[@SpencerPOsborn]

@@LethalEngineering Screenshotted this, printed it out and framed it on the wall to remind me to come back to this haha

[@Enembie]

@@LethalEngineering Thank god you're still active (or at least recently responding), i just found this channel...i just hope im not too late lol

[@MariusTC]

@@LethalEngineering , would you please add a link to the 2nd part? It's been more than 2 months since you wrote this. :D

[@Zoidd_Bergg]

Lethal Engineering you owe them $100 now 😂😂

[@a330turbinex7]

Any more videos about R2D2 ?

[@tricktreat6934]

Amazing! I can't wait to see this all come together!

[@brendanquinton762]

Why go to all that trouble and then do a terrible paint job with out even using high fill primer. Very weird

[@brodyfd]

@@brendanquinton762 yea lets just all start judging this guy! very cool stuff my G

[@mr.rajikon3911]

Did you ever finish the while R2D2?

[@radiorubbens]

What is the smaller r2d2 on the table in the corner. Made that yourself? Do you have videos?

[@LethalEngineering]

It's actually an R2D2 trash can that I got as a gift a long time ago. Just looked online to see if anyone still sells them and looks like their only on Ebay now, and pretty pricey.

[@radiorubbens]

@@LethalEngineering Thx for the swift reply!

[@moorhs69]

Great Video :) ... are you still going to make a Part 2?

[@LethalEngineering]

Yes! Just started on the dome Teeces lights yesterday

[@Jedi_Beasticles]

you should use a joining board to sand your edges. glue some sandpaper to a flat surface, it'll give you more square edges

[@josephcamden5964]

I have the same printer but what you do to make part stick so well mine are on glass with masking should I take masking ofc?

[@LethalEngineering]

I use aquanet hair spray to hold my prints down, but I think the biggest thing is printing with a brim (I use 10mm, I think). Maybe check the Facebook groups for your printer and see what other people have done.

[@josephcamden5964]

I use brim factory set sane printer as you have cr10. But I've been using a big piece of masking tape over the glass and it breaks free... so I'll try hairspray on the glass thank you

[@josephcamden5964]

Ok moved my setting for speed by mistake on the stand a lone machine...what speed should it be at...thanks

[@MeliodaStkz]

Could you do a video on the lazy Susan attachment process

[@dad9159]

Hope you're still around! Just watched part 1... Where's part 2?

[@LethalEngineering]

I know...I need to get building!

[@alvallac2171]

*you're (contraction of "YOU aRE") "Your" is for possession.

[@dad9159]

@@alvallac2171 LOL... The funny thing is I'm usually the one who points this out to others... What comes around, eh?

[@aaronm1855]

@@alvallac2171 I hope you're right, but you're not lol

[@israelpinedo2103]

I downloaded the "Michael Baddeley R2D2 Print Files" and the Dome is a single piece. How did you get the Dome- pieces?

[@trekker683]

Is printing in Pla really a good idea i heard that it starts decomposing when sunlight hits it and it melts very easily.

[@tomking2030]

that's very true. I printed out about 500 dollars worth of PLA over 5 years on Star Wars props. I'm now sold on ABS. You can sand it and from what I know it won't warp later on and costs about he same as pla does. With ABS. I just need to print at 250 from the extruder and 110 on the bed with tac and glue inclosed in a raise 3D printer never fails any print. I wish I knew about this shit 5 years ago because I have $200 more in PLA that will warp. That is useless in Arizona

[@MichaelBaddeley]

Great video!

[@jameswebb8162]

Awesome video, thanks for the info!! Can’t wait to get started!!

[@Mister_E.]

How does the wood filler hold up? I use auto body filler currently and if the wood filler doesn't crumble, I'd give it a shot. It's a lot less noxious and nasty to deal with anyway.

[@LethalEngineering]

It works well for me. All of my 3D prints are primarily for display, so I don't know what would happen with heavy use, but I've had no issues.

[@bearvassar6690]

Do u live in Nashville tn i would love to create my own astromechs what printer do u use how many reels of filament did u use and where did u say all the files where at

[@StarWarsTherapy]

This is an insane amount of work. Thank you for sharing with us!

[@Kaufman993]

Great job I might have to start working on my own R2D2 now!

[@jeffreypajela1724]

Was wondering what kind of filament are you using? Any suggestions were I can get a lot of filament at a good price, since this kind of project would use a lot of material.

[@LethalEngineering]

I tend to use Hatchbox PLA, which you can find on Amazon for about $20 per kg spool. Sometimes you can find multi-roll bundles and save maybe 20% per spool. There are some other highly rated manufacturer's (like Overture) which I haven't tried, but the ratings seems to like.

[@josephcamden5964]

What size screws to hold in lights in the logics?

[@sandragon2714]

Hi. Thanks for the video. Did you get to finish your project. I just started printing the dome. Wish me luck.

[@sandragon2714]

Hello, Thank you for your video. What percentage scale did you print it at? Thanks again.

[@LethalEngineering]

This is printed at 100% scale

[@donnhovis9276]

where dol i get the larger print of R2D2 I understand it`s in thingiverse but where at i can`t seem to find it

[@LethalEngineering]

See the onedrive link in the description. There might be a later set of file floating around. Michael Baddeley has a facebook group 'MrBaddeley Printed Droid' and a patreon where you should be able to find the latest version.

[@HarleyLittleHound]

Nice job! The dome is insane but it looks so good!

[@madballjs]

Did you complete the R2-D2 project watched you part 1 but don’t see any other videos on your channel for it.

[@LethalEngineering]

Still need to complete. On the goal list for this year!

[@ericlotz8752]

Very cool I think id like to build one, printers on the way

[@christopherjkringle8613]

Is it possible me to use a Creality Ender 3 Pro 3D printer to print the parts for R2? Looking at taking the plunge but not sure if this printer offers the necessary space. Appreciate your insight!

[@LethalEngineering]

I believe so. Take a look at the 'MrBaddeley Printed Droid' group on Facebook. I did a search on there and it appears people are making R2-D2s with the Ender 3.

[@christopherjkringle8613]

@@LethalEngineering awesome - will do! Just subscribed to you and will be watching! Thank you!

[@germinik]

Awesome video. I'm excited to see the rest.

[@stevenjones2371]

since i saw this and asked the how does one get the files i was new at the 3d printing i have all the g codes for a life size r2 i havent started this project yet i well soon i did start my first 3d project with a half size WALL-E its complete just gotta add the electronics i started with WALL-E cause its one of my daughters fav but thank you for helping me get into 3d printing i now own 2 printers and working on another

[@LethalEngineering]

That's awesome! Good work!

[@andrewpusey6339]

I know it's not clear from the instructions but have you put the upper ring upside down ? Just comparing to finished ones

[@aaronpmcbride]

Outstanding work.

[@stopmotionking49]

is that dome 12 inches

[@echo_9920]

Are u doing the scout trooper helmet ?

[@royaldarthvadersk3065]

I love R2D2 👍❤️❤️❤️ 🌹🌹🌹

[@cyborgbadger1015]

Thanks for the link to the 3d parts.

[@shaneiswhite123]

What grit sand paper?

[@gunnarbiker]

Did you ever finish R2?

[@blazing552]

Will you think of doing a BB8 in the future?

[@LethalEngineering]

Yes! But I better finish R2D2 first :)

[@adonian]

can this be converted to print on a creality 2 200mm

[@theGermanPrintingNerd]

Absolute cool , I´ve seen Models where the Dome is in several parts and about 4 rows on top of each other

[@echo_9920]

i have a question what kind of nozzle did you use for this print ??

[@echo_9920]

what size??

[@marvrich5785]

Pls Part 3 , 4 ,5 ,6 ................ we Need it 👍😁

[@rfengineer]

How much did it cost you in materials?

[@johnb89jb]

Would you still recommend CR-10 as a 3 d printers?

[@darthhonky88]

Absolutely. The only problems I've had with mine have been my fault. Once you get the hang of it, it's an amazing machine.

[@DH-fc2os]

How many rolls of filament did you use to complete him

[@LethalEngineering]

Haven't completed it yet, but I imagine the dome was maybe 1.5 rolls of filament

[@tomking2030]

I have built 2 astromechs. R5-D4 and R2-Q5. I have 5 different domes that can go on R2-Q5 for various imperial droids. Lethal Engin. I suggest you next print out the R0 dome. I printed out 2 of them full sized and they are solid domes to add to your collection. The R0 domes are seen allot in the Force Awakens in the rebel base.

[@MaximusTheChosenOne]

3D prints as well?

[@tomking2030]

@@MaximusTheChosenOne 2 Domes are 3D printed, a black Poe Damerson R0 (Now sold at Galaxy's Edge store) and a white R0 dome. The rest of my domes are resin or aluminum.

[@erickaufman1923]

The smoother you can get the dome, the better the metallic and sonic blue looks. Sanding the dome greeblies was more difficult for me than sanding the dome.

[@NICHOLASRGLORIOSO]

VERY COOL!!!

[@daveyleeth7982]

Is this project still going on?

[@LethalEngineering]

Yes! I have all the supplies just need to get to work.

[@jellyfishanimation]

How many reels did it take to print off one dome?

[@LethalEngineering]

I don't remember, maybe 2 to 3?

[@LethalEngineering]

I mean, I could probably just weight it and give you a ball park estimate

[@LethalEngineering]

It weighs 2 kg, with paint, so definitely 2 rolls

[@HighMountainStudios]

Loved the video! are you planning on doing Part 2 still? super excited to see!

[@LethalEngineering]

Yes! Part 2 will be the dome electronics. I have all the PCBs and circuit components, just need to assemble them.

[@lilbowwowy]

Would love to know the music you use in the background of your videos.

[@TheSearchForSigns]

I'm fascinated by this - is it a model designed to work with moving parts/robotics?

[@johnallen4030]

What was your later height?

[@gunnarbiker]

How many rolls of filament did this use?

[@LethalEngineering]

1 to 2...I think. I'll have to weigh it.

[@gunnarbiker]

@@LethalEngineering Thanks! I love it and gotta try it for myself!

[@Acedanger1974]

You doing part 2?

[@PaulA-sy1xl]

What type of glue do you use?

[@LethalEngineering]

Some super glue from the hardware store

[@KingNothing22]

i actually use 2 part epoxy, its stronger and wont fall apart.

[@DisgruntledPigumon]

Why does everyone seem to stop building their R2?

[@zombiehunter1152]

Did you actually finish the whole R2D2?

[@crayonopossum5831]

Your videos are so cool and informative! when will you be back?

[@LethalEngineering]

Ummmmm...I'm going to shoot for part two in a month...but that's what I said a year ago

[@roblanting2140]

@@LethalEngineering I hope to see it soon. Best video for building R2 yet.

[@sandragon2714]

Thank you will start mine in a few minutes. Are you planning on making more videos? I like the Kylo Ren helmet. Was hoping you would make a Captain Rex helmet. Thanks again have a good evening.

[@callamblake8804]

Can you 3D print the 2002 green goblin helmet from Spider-Man?

[@grasug8550]

I completely messed up the gluing of dome bits together - i am going to sand it until its round though. Might work.

[@grasug8550]

Turns out that 'sanding it round' means i get to see behind the wall of my print :( i reprinted the whole thing.

[@studionulzevenzeven5188]

Thank you for this video! its verry helpfull! Finaly a good video with good details!

[@alvallac2171]

*It's (contraction of "it is/has") its: for possession *very *helpful *Finally, a

[@bladyops9900]

At 10:18 I was getting changed and I looked at the screen right at this moment. I was very shocked to say the least 😂

[@stevenjones2371]

how would some one open the files once downloading the files of r2

[@LethalEngineering]

The .STL files? They can be opened in any 3d printer slicer software. I use Cura

[@stevenjones2371]

@@LethalEngineering ok ty so much

[@PestVic]

Wheres the next video??

[@johnallen4030]

And infill percentage?

[@pueblobeek]

I don't have a 3D printer. How much does it cost in materials to print out the parts like that? I'll be watching for future videos as you continue to build R2!

[@jestgrubo]

What kind of printer did you use to print R2-D2 ???

[@gunnarbiker]

He mentioned it being a Creality CR-10. they're about $399 on amazon (US).

[@foryouuugamingcoalition7110]

where you at man. you should do a lot more videos, I think your a likable dude.

[@UncleVim]

Love ur videos, i'm planning to do a 3d printed full iron man armor set.

[@JGUIJanuszGerszberg]

Did anyone calculated the weight of filament requested to print out?

[@LethalEngineering]

I think it was 1 kg?

[@zombiehunter1152]

Did you finish R2D2?

[@LethalEngineering]

No, actually just started back up yesterday working on the Teeces lights for the Dome

[@zombiehunter1152]

@@LethalEngineering ok nice

[@zombiehunter1152]

@@LethalEngineering have you finished the lights in the dome yet?

[@poooopiepie]

Really cool build. I would suggest using gloss black as a base coat before the silver. And then use the silver under that blue. Just my experience. Great job nevertheless

[@LethalEngineering]

Thanks for the tip! I'll give it a try on the rest of the build.

[@chrishechtl8330]

Not bad. You should have tested the lazy susan before you got to bolting things together. I have a 400mm and it sticks something fierce. Kyle Campbell had the same problem, (check out his channel) it is a pain in the butt to fix with the dremel and sanding paper. I haven't gotten into mine very far yet.Also, it is a good idea to hit the metal looking parts with a base coat of gloss (I'm planning to use high gloss) black paint, then the metal colors. I'm using aluminum for mine, with the rub and buff afterward. There is a trick of using translucent yellow as a base coat as well (I haven't tried it yet). I have the Sonic blue pearl coming in this weekend. I tried a blue metallic from Walmart and... yeah, no. You can find mods on Thingiverse including stuff for additional panels and such. I don't know when I'll get around to uploading my mods for the V2 utility arm bays or the extra arms I'm working on.www.thingiverse.com/Eebel/aboutwww.thingiverse.com/hammer32/aboutwww.thingiverse.com/Retrodalek/aboutwww.thingiverse.com/mascal/designsI just finished Mascal's fusion furnace, very cool.www.thingiverse.com/Rorlin/designsHe has a youtube channel explaining some of his work. I strongly suggest you look into the mods before you get too carried away printing the stock stuff. There might be something you want in there. I have multiple versions of the top of the periscope because I didn't know about 1 mod that has a detachable cover plate for instance. Having hidden vents in the battery covers for the motors to allow air flow to prevent overheating also makes sense. If you are doing the full build watch out for the nut capture system in the skirt. They are a pain in the rump! The small ones do not fit well, at least in my experience. I'm going to have to modify them in order to get them in. Watch out for the data door hinge too. It is flagged in the directions. There is a mod for it which replaces the plastic rod with a metal one. I agree with Mighty Jabba, boy do I have flashbacks of sanding! I was doing it last night with the skirt though! Good luck with that!

[@PokéGree]

Where are the updates to this? you have this video from 3 years ago but nothin since then? where you at???

[@LethalEngineering]

Good question. I soldered up the electronics for the dome lights, just need to attach them, and edit a video.

[@PokéGree]

@@LethalEngineering Gotta do an update video!

[@ИгорьРясков-е2э]

Отлично . Просто великолепная работа.

[@LethalEngineering]

En Ingles por favor

[@did3d523]

is it life scale? where is part2 ??

[@LethalEngineering]

Yep!

[@Gingy.Liftss]

wheres part two have been waiting for five months hurry up

[@JimmyJames420]

Where's part 2?

[@LethalEngineering]

In my basement collecting dust...but for real I need to get working on it!

[@ВасилийФ-х8и]

*Классно получилось!!!!* 🙂🇷🇺

[@m.032]

Make more videos 🙌

[@xxxxzorroxxxx]

More videos, been long long time.

[@aaronm1855]

April 2021...part 2? I've just finished printing all 6 dome pieces, plus the 2 upper pie. Have to wait until the weekend to start sanding and assembly. Don't make me learn how to upload videos to race you to the finish!!

[@MaxPlass]

No part 2. Damn.

[@xxxxzorroxxxx]

Are you staring from from bottom to top I hop. Can’t wait

[@xxxxzorroxxxx]

Great job.. love big fan with Mr Michael Baddeley and you . I building the R5- D4. Parent post with video to soon . Join him on Facebook.

[@OfficiallySanctionedKATG]

They should have hired you to play the younger Terminator in Terminator Dark Fate. Your mother didnt used to hang around with Arnie when she was younger did she?

[@The_MightyFrOg]

Okay but where's the other parts? Homie really just built an R2 helmet...

[@LethalEngineering]

Who you callin' homie, bro? ...just kidding, you're absolutely right! Need to get back on this project.

[@TienBuilds]

Make a clone helment

[@grenalis]

It looks like the legs on your R2 behind you, are are the wrong sides. The long rod should be on the back side and the 2 circles should be on the front side. Just a "I noticed it" , NOT A 'your a idiot", comment. Good work on the new dome. How many rolls of filament? 3?

[@irandom419]

Thanks for ruining my evening. I thought the biggest sticking point would be the dome acquisition. It sounds possible now.

[@bigbad_tanner]

Hi