DIY BACKHOE / Excavator part: 1 BUILDING the BASE

[@VinyB57]

Link to website and plans: 57design.ca/

[@kevingrant2067]

It’s funny that I found your channel when I was pondering about maybe making a grass catcher for my lawnmower (which I never did), soon I subscribed and have been hooked ever since, pretty smart dude for a French-talking’ Canadian 😂

[@VinyB57]

Hey thanks Kevin...from a French-talking Canadian! 😅

[@htownblue11]

Impressive as always and thanks for the laughs Viny! Most under rated channel on the KZbin along with Ed Gasket.

[@VinyB57]

Hey thanks buddy!

[@farmertylerranch4399]

This was awesome Viny! Can’t wait to see it when it’s all done. You do outstanding work!

[@VinyB57]

Hey thanks buddy! 👍

[@timotysederstrom6649]

Amazing. I would love to be able to by this as a diy kit

[@ticurieux]

Really good video. Fireball tool have a good video comparing welding table

[@VinyB57]

Great suggestion! Thanks

[@hollandduck79]

Hello from the Netherlands. thanks for the video Viny . Sincerely Hollandduck

[@VinyB57]

Hello there! My pleasure!

[@hollandduck79]

@@VinyB57 👍

[@turboValmet]

I already have a 6 ton takeuchi excavator but im still gonna watch this build

[@VWJawbreaker]

Love the jokes and techy stuff! Excellent work!

[@VinyB57]

Thanks a ton!

[@VWJawbreaker]

@@VinyB57 907kg of thanks is a ton!! 😂

[@Dean2die4]

I have been waiting for this one!! Here for the jokes and technical stuff!! 😂

[@VinyB57]

😉👌

[@AustinCoulson]

Viny! Thanks for the shout out. I love this build series, I can't wait for the next episode. Have you posted a link to the digital angle finder you use? I want to get one.

[@VinyB57]

Got it a while ago from the wife! 😅 www.amazon.ca/XUNTOP-Stainless-360%C2%B0Digital-Protractor-Woodworking/dp/B09X2Z6NV3/ref=sr_1_17?crid=31IXDO85RTEBL&keywords=angle+finder&qid=1692625656&sprefix=angle+finder%2Caps%2C81&sr=8-17

[@JeffPedlow]

Spotted the cylinders from Princess Auto, and I know I'm in the right place to watch a build. Wishing you luck from the other side of the country. :)

[@VinyB57]

thanks Jeff! 🤙

[@fvpaquetqc]

Mechante belle job! C'est nice voir toute les pieces fitter ensemble comme un gros jeu de légo!

[@jmsq92]

Fantastic work Viny, thanks for the friday afternoon video. Looping forward for the next videos.

[@VinyB57]

Glad you enjoyed it

[@joblo24]

Lache pas ! Toujours de beau projets bien fait !

[@rockstarfan886]

He'll yes been waiting for this series it gonna be badass

[@VinyB57]

Hope so! 😉

[@aguywhodoesstuff]

This is just an amazing project, everything I would love to do and am capable of doing, but unless lotto happens this old nurse will just have to live vicariously

[@VinyB57]

I'm 100% with you!! 🤑

[@joshbolding4165]

Awesome work man. I love watching your videos! You and Colin Furze are my favorite. Keep it up and you will grow into a huge channel!

[@TheTrooper777]

Awesom, Vinny

[@VinyB57]

Thanks

[@alanharwood5966]

You are an amazing engineer 1000% but please watch some MIG welding tutorial. You are laying cold slugs with mig push forward to create full fusion and get fullpenation penitration . respect to you 👍👍👍👍

[@VinyB57]

I will!

[@soho5793]

So just wow😮 Nice job 👍

[@VinyB57]

Thank you so much 😀

[@richardculbertson8027]

Phil vandaley built one of those welding fixture tables on his channel and Jeremy schmitt built one on his channel both very good for reference viny

[@VinyB57]

Hey thanks buddy, I'll have a look!

[@EverythingDirtLateModel]

Awesome job with the video and build!!

[@VinyB57]

Thanks Jeff!

[@EverythingDirtLateModel]

bushing install was Perfect!! lol.

[@VinyB57]

😂 sure!

[@thisolesignguy2733]

Save your old broken end-mills. They make great dowel pins, drill centers, & tooling for the lathe when ground down. Saved me a bunch of $$ on buying tooling that i'd only use once!

[@stevescuba1978]

I made all sorts of special profile tools from old end mills. Chamfer bits, countersinks, you name it.

[@jasonnora372]

Nice work ❤

[@VinyB57]

Thanks

[@arimaoutdoors8255]

For welding over 1/4” plate switching from mig to dual shield (FCAW) would be a much easier process that is not prone to the issues with solid wire (lack of penetration). Or you could use pulse mig with a different gas combo assuming your machine has pulse capability. Cool build.

[@joeg7755]

Love the jokes and build!!

[@KnownSender1]

😂😂😂😂😂😂 great video man always a good time 💯👍

[@VinyB57]

Glad you enjoyed

[@philmecanique]

Super video. Pour la table de production d'assemblage verifie avec maker table. Ils ont des plans de dispo pour t'en fabriqué une sur mesure!

[@wadebrewer7212]

Subscribed. This is awesome.

[@jimysk8er]

you could always freeze the tools used to install the bushings too or carry them in a foam cup. Not sure if you did this too but you could heat up more of the structure where the bushings go since all your heat will soak into the metal by conduction faster than it will dissipate via radiation/convection to ambient.

[@MINItraktor196]

Оо привет. Как же круто что я попал на ваш канал. Хорошее видео. 👍👍👍

[@joeg7755]

Hey Viny, I really love that Fireball tooling but to expensive for me. I hope you will make that welding table and have plans available. Cheers :)

[@S-Lab52]

Как всегда великолепно и интересно! Продолжайте в том же духе.

[@humbucker0076]

While you're hammering in the Bushings the part jumps around the table and generally all the elasticity in the part absorbs a lot of energy from the blow by dampening it. A good way to mitigate that is holding a big sledgehammer on the other side of the object or in this case the housing for the bushing. Kind of works like an anvil then. The main downside is you need a second person, but your wife was there anyways. The far better solution would be to use a press or make a gear puller work. But the sledgehammer trick gets you a long ways.

[@mandeladams4793]

I purchased a laser cut welding table kit 2 feet by 4 feet, on casters. It is a good fit for my two car garage set up. Kinda light duty I believe it was rated to hold 800pounds or 1000 pounds. I bolted a 4 inch vice to the top( not even mass for a larger vice) i think it was 2" on center hole spacing with 5/8" holes in the 1/4" plate used for the top. The grid underneath the top reduces weight and adds strength, but sometimes land right where you need a clamp 🗜️. A thicker top plate would probably work better, especially wicking the heat from parts and resisting bending forces from your clamps holding it down to the table. Magnetic drill and go to town... 3"-4" hole centers are fine in most cases. As for flattening top, flame straightening or torch.

[@VinyB57]

Hey thanks for your comment, at first I was aiming for an 1/4'' top plate too, but now, after searcher a bit, I'm more looking to build one with an 1/2'' plate instead and your comment reinforces that too! 👍 If I was making money out of such a table, it would be an no brainer, but since it's to play around on week-ends, I'll have to save a bit of money so I can build such a large and thick table (8' x 3')

[@sametsefaeyigun7860]

I think you may consider buying one of fireball tools table because, if you don't have proper tool to make the table, your weldings or the parts you will produced on won't be consistent or straight.

[@VinyB57]

I agree with you, but, I'm gonna use laser cut plates and it should be way more precise then what I need! Plus I don't have the 5k$ for the smaller table....you may think I make big $$ with YT, but I'm making almost nothing (for real)...I think, I should start a OF...🤣

[@sametsefaeyigun7860]

@VinyB57 I am a mechanical engineering student, and I was thinking that I would be a corporate engineer on weekdays, and this would make enough money to my hobies even can afford a small budget race team, but after I saw you struggling with money I have started to think that I may not fulfill this dream

[@maxatherelaxer]

Great content and fantastic videography. But I would look for a new laser cutting supplier. The finish on those parts was more comparable to a decent plasma cut part than what I would expect from laser. Other than that great content all around.

[@nickgronendyke3902]

Your english is pretty good. Personally i like the live action audio better than the post production voice over. Thanks for the awesome content buddy

[@anywaythewindblows2357]

hell yeah

[@DavidShand-s6f]

Late comment but your English is way better than my French and sometimes better than my English. 🙂

[@VinyB57]

You should check my latest videos then! My English is getting even better-er...heeu...well never mind! 😅 (for real you should check my latest content, it's even better!)

[@davian157]

👍👍👍

[@VinyB57]

👌👌👌

[@drelaw2002]

Excellent video bro, ...what is the name of the 3D software you used before you sent the design parts to Conceptromec?

[@VinyB57]

Solidworks and conceptromec is just a sponsor, they didn't fabricated a single part on this project.

[@drelaw2002]

@@VinyB57 Thanks for the info

[@calebuilds7373]

what kind of program did you use to design the backhoe? some kind of cad or cam? i know nothing about that kind of stuff but wanting to learn

[@alexleblanc88]

tu as utilisé quel programme pour le dessin??

[@VinyB57]

Solidworks

[@alexleblanc88]

et par rapport a la force du tracteur/force du PTO

[@beingabdaal950]

You should make a tractor attachment for a forklift

[@VinyB57]

I know...probably next project ! 😉

[@tonyestvik7969]

Darn Canadians....😉... Yes that was cheating- you always cut your own metal......are you getting old...No muscles in your manbobs any more 🤔🤔🤔🤪.... No, sorry- looking really good, as I told you before - IS THERE ANYTHING YOU CANT MAKE? Great job- and 55000 subscribers - you getting closer to the plack...and a question my dear friend - is it still as fun to do this, if you think back... When I started following you, you had 1500 followers - and now 55000- its about a little bigger town in Sweden - witch are following your work.... Good job VinyB 😉

[@VinyB57]

Is it still as fun to do this, if you think back?: Yep! Still have a ton of fun editing the videos. I just wish that having a channel could help me ($$$) enough so I could cut on my day job hours, but it's not the case, so I'm just working my life off, which is kinda a paine...but you know, that's the path that I choosed I guess 🤷‍♂️

[@bancandoocurioso4357]

Onde consigo um projeto ou diagrama para eu poder fazer uma aqui no Brasil? Me ajuda aí colega? Me envia o projeto por favor?

[@user-fu1xy4hn2k]

Bonjour vous parlez français demeurez-vous au Québec dans le Canada ?

[@VinyB57]

Oui Québec!

[@yeensbeans]

Time for some dry ice next time

[@rjung_ch]

Hey Viny, love all your projects and no, I'm not only here for the d* jokes 🙂😂!!

[@VinyB57]

Yeah right! 😉

[@rjung_ch]

@@VinyB57 Learned a word on a French Rally channel. Sanglier!

[@79morgan]

challenge It just so happens that you can also build a rotor and tilt to the backhoe. Being able to rotate the bucket. Being able to angle the bucket. If you make one like that, my hotmail will ring and I will buy the drawing. Electric ore hydraulic 🤔 Its so easy to buy a drawing and DXF and its almost done..

[@adman6380]

Here as always for the amazing ideas/work but also for the dick jokes

[@VinyB57]

I knew it! 😉

[@TheOystei]

Fireball tools have a decent video on the process he went through for making his welding table since he wasn't happy with what he could find. might be informative

[@davearobb]

Hi there, I know Snowball engineering a UK channel built a welding table for his shop, maybe worth a view

[@VinyB57]

I'll have a look, thanks!

[@itsasinine3337]

Im only watching this to learn how to put hydraulic outriggers onto a harbor freight towable backhoe

[@VinyB57]

Okidou!

[@giv1191]

??Were is a smart

[@VinyB57]

In the other shop...in pieces...🙈🙊

[@MihkelKaselaid]

Nice project, but those parts 1/2´´ are not the best cut quality. Looks like focus was way too high and kerf too wide.

[@VinyB57]

Maybe, I don't really have a lot of experience comparing 1/2'' cuts by different suppliers!

[@wheellife]

Another great video Viny! Shame, not one dick joke though. 😂

[@VinyB57]

there was one.....😉

[@wheellife]

@@VinyB57 must have been a short one 🤣

[@hothotllywood4192]

On est pas là pour les blagues, on est pas comme ça. Enfin je suis déçu, j'ai pas vu de bite (bisoune?) sur tes plans. Super construction, bravo !

[@rjung_ch]

exactly right!

[@cecilandrews7479]

So if I got this straight, you copied other backhoe designs had the parts fabricated by someone else and you welded them together. I think it'd be cheaper just to buy a used backhoe attachment

[@VinyB57]

sure, if building it is not for you! But good luck finding one in good condition at a low price! Cause I checked in my area before ''copying'' other backhoes and it was either super old, or too expensive! But, there's always more than one way!

[@tonyjackson4099]

Dude thinks people will buy his plans to make their own…. He made a massive mistake in this project. Overestimating his audiences’ intelligence. Sometimes really, really smart people don’t know how smart they are and they think they’re normal. 😂

[@VinyB57]

I'm 100% normal...iissh..