It is very kind of you to take the time to share with others, there is no doubt this will benefit many. The ceat tires are not as stiff compared to other manufacturers. Well done! Regards from maine USA.
@gudgengrebe4 ай бұрын
This was very well explained and demonstrated. It was very pleasing when the last bit of the tyre popped in! Thanks for sharing this. I feel a lot more confident about doing it properly now.
@leuheanrede4 ай бұрын
Glad you found this useful mate. Thanks and cheers🙂
@L--Z Жыл бұрын
This Seattle housewife and her Himalayan sure miss you and your content. Hopefully you are well...
@ianseddon93473 ай бұрын
Another very good video - in 50+ years riding I’ve done this many times, but it’s always good to watch someone else and pick up another tip! Changing tyres should hold no fears, but somehow there is always a little frisson when the tyre is on and the air stays in!!
@leuheanrede3 ай бұрын
Thanks mate, Have thus far stuck with changing tires myself, Keeps me trained, which has once come in handy while fixing a puncture in the middle of nowhere 😉
@ianseddon93473 ай бұрын
Exactly so - I could pay but somehow it feels lazy, and while 🤞 I haven’t fixed a puncture at the roadside for many years, there is great security in knowing I can (still) do it & of course I still have the £60 I didn’t pay the shop to do the job I can do myself! I see you have the new 450, they’re now in UK and a bit tempting, but how can I dump my faithful old friend? Well we’ll see in a while!
@Liam1304 Жыл бұрын
Thank you. You made it look so easy when I seem to have to fight it all the time!
@leuheanrede Жыл бұрын
Hey mate. Just one thing, bring the bead to the center of the rim, rest is easy 🙂 cheers
@henryxk Жыл бұрын
I would like to thank you immensely. I live in Brazil and I have a Himalayan. Your videos are very educational and important to me. They are enlightening and help a lot for basic maintenance. Again, thank you very much for your posts.
@markrobertson5305 Жыл бұрын
Thanks for sharing. It really helps to watch the first time, then do.
@leuheanrede Жыл бұрын
My pleasure mate, hope this helps, just remember the key to simply get it on is thin layer of oil on bead that is still out and bringing it to the center of the rim as we go along. Happy DIYing, cheers :)
@malcolmstone2841 Жыл бұрын
Thanks again you always make it look easy and you are so very patient with everything you do cheers mate
@dmagp Жыл бұрын
Just wanted to know you have inserted a bolt with the tube under the rim which may cause rust in winter seasons, alternative you would have choosen an aluminium washer kind which will have gap filler between the air inlet mouth nd the rim
@leuheanrede Жыл бұрын
Thanks mate. That is a great idea. Will try it next time thanks
Better to get it done through tyre change machine without scraches
@ameliacortez4510 Жыл бұрын
Hey i wanted to enquire about something..... So over time bits of dust and dirt obviously gets accumulated inside the interior of the silencer / exhaust.... So is there any way or technique to clean that out?
@danagerds Жыл бұрын
I'm Changning mine now, I'm putting on Mitas EO7's, very thick side walls. I'm struggling just to put the nozzle in place!
@leuheanrede Жыл бұрын
Hey mate, try putting in two tire irons where i have used one, that will give better clearance
@highhope4456 Жыл бұрын
Bro Can you tell me what you use for the lever damage areas?
@AnujSingh-pn7oj11 ай бұрын
Bro how do you deal with a puncture on the rear tyre of Himalayan? Do you carry your own puncture repairing tools or you use any type of anti puncture gel in your tyre?
@mosheadar Жыл бұрын
First of, Thank you so much for this knowledge you are sharing in your channel. I have a few questions regarding other videos - I have a royal Enfield scram 411 and wanted to make sure if some of your recommendations are still valid. I believe the engine is same as Himalayan BS-6. Is it still recommended to change the spark plugs into - CR8EIX - BY NGK? (the shops in the ciry I'm at in India don't have this specific model. do you know of a Bosch one that performs the same?) You recommended to change the relay for fuel pump into - Roots 12v 25 amp. I think it's a 5 pin micro relay but the one in the scram has 4 pins. Can you recommend the right model that would fit? (do you also recommend to change the other 4 relay to the same model?) Last question (apologies for the long message..) In your view, What are the most recommended (and not too complicated) upgrades one should make on the bike for better, smoother and enjoyable ride? Thanks again.
@asishm3703 Жыл бұрын
Hi. Any reason why havent you gotten any auxillary lights? Its terrifying to ride highways at night with stock lights for me.
@leuheanrede Жыл бұрын
Hey mate, I am not a big fan of auxiliary lamps and find them to be annoying and a nuisance for the on coming traffic. I have experimented with other bulbs and now running LED, will share a vid soon cheers
@markrobertson53056 ай бұрын
Hi. How are you doing. Long time and I just wondered if you're ok. Do you still have the old 411 Himalayan?
@leuheanrede6 ай бұрын
Hey mate, very kind of you 👍 Yes indeed. Still have it. Not gonna sell it even for a mill.... Just relocated to a new city, Thus that's the only hold up in vids. But will be addressing that shortly.. Thanks again, cheers🙂
@markrobertson53056 ай бұрын
@@leuheanrede Thanks. Good to know you've ok and I hope all has gone well.
@dmagp Жыл бұрын
The rim gets spoiled by using the lever
@leuheanrede Жыл бұрын
That is true.
@L--Z Жыл бұрын
Patina!
@dream_catch_r Жыл бұрын
Hey... I am also a himalayan user. My bike's abs are not working. Can you help me?
@danagerds Жыл бұрын
fuse??
@leuheanrede Жыл бұрын
Hey mate, indeed fuse would be the first place to look for, next would be the sensors on both front and back wheel and make sure the wiring is not damaged or cut. then check the wiring harness bracket that fits into the ABS module Cheers