LEVEL5 Compound Mud Mixer in Action

🛍️ SHOP LEVEL5 Drywall Tools Online: level5.tools/shop-KZbin
🔴 Subscribe to our Channel: www.level5.tools/youtube-subs...
👷‍♂️👷🏽👷‍♀️ Join Our VIP Club: www.level5.tools/vip
📺 LEVEL5 Drywall Mud Mixer Features & Overview Video
• Drywall Mixer Mud Comp...
❔❓❔ Do you have a question about something not covered in this video? Let us know in the comments.
🚚 👉 Check out the full line up of our drywall taping and finishing tools as well as our best-selling hand tools at www.level5tools.com or on our Amazon Store: level5.tools/yt-amazon
Follow us on Facebook: / level5tools
Follow us on Instagram: / level5tools
#drywall #tools #level5tools
__________________________________________________________________________
Watch Scott Murray, President of LEVEL5 Tools, show the patented L5 drywall mud mixer in action as it effortlessly whips through a fresh batch of drywall joint compound.
As one of the most widely used drywall tools in every finisher’s toolbox, the mud mixer is objectively one of the most integral drywall tools out there. As a company that is driven to innovate and make the lives of drywall finishers easier, LEVEL5 took on the challenge of completely rethinking the traditional, outdated mud mixer design. Through years of development and listening to the feedback of the skilled tradespeople on the job, LEVEL5 was able to release a game changing mud mixer to it’s already vast range of drywall tools.
So, what’s so special about this drywall mud mixer? A lot. For starters, its patented design reduces the wear on your power drill by up to 20% which not only adds years of life to your drill but makes every use that much easier on your body as the curved blades work through even the thickest of mud with ease. Speaking of blades, we took notes from finishers that were tired of getting plastic chips in their compound from their mixer making contact with the bucket so we designed the blades and filed their edges in a way that ensures the prevention of any bucket chipping. We have also made mud mixing more comfortable than ever by increasing the length of the shaft to prevent the user from having to stoop over the bucket as they work. If the shaft is too long for you, no problem, just cut it down to suit your height and work needs or pick up one of our shorter variants. Added benefits aside, good drywall tools should do what they are designed to, and do it well! With that in mind, we designed this mixer to keep mud directly in the middle of the bucket while preventing the formation of air pockets to provide the smoothest and most consistent drywall mud possible. Lastly, to fit jobs of all sizes and descriptions we have created three sizes of mixer: 32”, 28” and 13” tall.
Make sure to watch the full video to see the L5 mud mixer in action and if you have any questions make sure to let us know in the comments!
Welcome to the Red Zone! 🔥

[@SuperUncleRyan]

I bought this mixer on the advice of other experienced finishers, who said to get a four bladed mixer. I bought the Level 5 because it looked good and was available on Amazon. I am very happy with it. It does exactly what he is explaining. The shaft is a bit long but I can easily fix that, of course that would be a plus for a taller person. Another Level 5 tool that I am very happy with. I really want to try the taper (Bazooka) but I'm poor. LOL

[@wemcal]

Great video and great information

[@LEVEL5Tools]

Thanks for the feedback! We appreciate your support. 🙌

[@davidgrza]

Will it scrape the bottom or sides of the bucket?

[@LEVEL5Tools]

Nope! It has been specifically designed to not scrape or damage the bucket.

[@normanknoodle7267]

How much water should I add to plus 3 for the Mud Shot?

[@LEVEL5Tools]

This is a difficult question to answer because there is really no set amount of water to put into the mud since it's never the same consistency. It's generally something you have to do by feel.

[@normanknoodle7267]

LEVEL5 Tools thank for replying.

[@LEVEL5Tools]

No problem! Please let us know if you have any other questions.

[@igorverdes]

what's the tallest size?

[@CakesBerry]

This one in the video, 32" costs $38 CAD plus tax.

[@yasserabdelghafar9193]

is there any way to reduce noise result? can we lubricate the motor??

[@LEVEL5Tools]

Please contact our support team at 866.562.4229. They'll get you sorted out!