So many videos on how to level the deck on your mower, but I've only seen one or maybe two that recommend you check the air pressure in your tires PRIOR to doing anything. Make sure you have the recommended pressure in the tires first! Then do all the other stuff in the video.
@rogeremeadows2 ай бұрын
How can a person check to make sure I am getting the maximum blade height. I have leveled and tires are inflated properly but I would like to maximize the cutting height. It is about an inch off relative to the markings on the right height. handle guide
@ernestotrevino8712 ай бұрын
I have a mustang 50 zero turn how do I level mine. Cause it is different from your need your help. Thank you ahead
@LeeLafferty-q9j Жыл бұрын
Perfect, to the point and simple.
@Olaf2363 ай бұрын
Thanks for the tutorial…..
@DeanoOutDoors3 ай бұрын
Your welcome!
@EvanSarris2 ай бұрын
Maybe I missed it. I understand that the front bolt adjust the deck up and down but does it keep the deck level from front to back while you are adjusting it?
@DeanoOutDoors2 ай бұрын
Yes, the front adjustment is for leveling front to back, and the other is for side to side.
@TA-jm1hs5 ай бұрын
I bought one last night on FBM got home and realized that the deck is uneven. I was so mad at myself until i came across this video. I hope this fixes it! Thank you so much for the video
@DeanoOutDoors5 ай бұрын
Your welcome! I hope this does the trick for you as well.
@nannettenannettek95453 ай бұрын
I adjusted my deck, but there is something else wrong. It won't stay. There is something else that gets loose. When I lift the deck, it makes a loud "click" and then it's level, again. Do you have a suggestion?
@johnkeyte4076 ай бұрын
Thank you, I've watched a number of videos on this subject and yours is the simplist, clear and works !!!
@DeanoOutDoors5 ай бұрын
Your welcome!
@patrickponthieux393910 ай бұрын
This is a very poor shity design by xmark. They should have built something better than that something like the other xmark decks that have a pin you pull out on a bracket with adjustable settings. I have a 2015 quest by xmark and it is a bitch to get the deck set right. I have broken bolts and replaced bolts and nuts trying to figure it out and now I have to bring it to a xmark dealer because of I believe is junk. I wish I would have purchased another brand but my funds are limited. I been a auto mechanic for 17 years and I can't believe I have to bring it to a dealer.
@rowdy1271004 ай бұрын
Great video! Do you happen to have one to help the toro track atraight (mine pulls right when both levers are pushed all the way forwards)
@DeanoOutDoors4 ай бұрын
Thanks! I have that video on my to do list. Should be out soon.
@lawrencem30123 ай бұрын
Thanks, simple, easy and it worked. :)
@ottomolmen98624 ай бұрын
Didn't see you actually measure the height, how do you measure what you can't see or get a finger in?
@DeanoOutDoors4 ай бұрын
I wasn’t leveling my deck, it was already level. This was a tutorial on How To level your deck. Thanks for watching.
@kevinsimeon44473 ай бұрын
Quick, clear and simple! Thanks for sharing. BTW, I found uneven cut can also be cause by an underinflated tire. Be sure to check air tire pressure on both tires are equal so mower isn't leaning due to a soft tire.
@DeanoOutDoors3 ай бұрын
Yes, great tip. Many people never consider proper tire inflation, especially on a lawn mower.
@authorsauditions3 ай бұрын
Do you have leveling bar on the back? Is that what it is?
@DeanoOutDoors3 ай бұрын
Yes, you can level side to side with the leveling bracket on the rear left side of the deck. The front adjustment is for front to back.
@diellwood81975 ай бұрын
Thank u.
@DeanoOutDoors5 ай бұрын
Your welcome!
@rataelo19838 ай бұрын
How I check the hydraulic oil??
@JJ-np1ig5 ай бұрын
Excellent video. Simply and clearly explained. Thank you!
@DeanoOutDoors5 ай бұрын
Your welcome! I hope it was helpful.
@kbsquared6305 ай бұрын
Mine does not have that adjustment bracket. Can’t figure out how to level it.
@DeanoOutDoors5 ай бұрын
What year and model?
@kbsquared6305 ай бұрын
@@DeanoOutDoors model 75742. I think I finally found the correct manual. Thank you.