Levelling up your Speedo and GPS T7 World Raid install

Putting a GPS on your motorcycle handlebars is a bad move. Check out our GPS and Speedo mounting solution for the Yamaha T7 / World Raid and see why levelling up these two instruments is the best way to set-up your adventure bike dashboard. Purchase the unit here: motologyfilms.com/product/tft...
🔔 Hit the Subscribe button and become part of our growing community for more of our thrilling off-road adventures and valuable riding insights.
Join this channel to get access to perks:
/ @motologyfilms
Subscribe to Motology Films on KZbin: / ariemann1
Visit our website: motologyfilms.com/
Purchase Our Feature Films here: gumroad.com/ariemann1
Follow us on Social Media
Instagram - / motology_films
Facebook - / motologyar
TikTok - / ariemann1

[@MotologyFilms]

Hey guys, one final detail on Installation - put a small blob of silicone, or rubber tape on the aluminium crossbar to complete the stabilising. The tension between this bar and the curled tabs can vary, given the combined movement of the rubber grommets and tab profile. Cheers AR

[@monsieurg9252]

Hello ! Not afraid about the speedo plug not being protected against water now ?

[@Bonanno13]

​@@monsieurg9252 That is a valid question. I am thinking to give mine a few wraps with electrical tape. Everything on a moto is water resistant though. Usually the plastic housings are to keep things tidy and not full of dirt.

[@screaminR6]

How man people here like Adam's content so much you hit the like button before the advert is even done playing and the video hasn't even begun. :)

[@MotologyFilms]

Thanks mate ✊️

[@Gravelcruiser]

Yeah, guilty. 😎

[@Corey-pd3mi]

Oh FFS, that’s why there’s so many ads, people like you liking the ads 🤪

[@screaminR6]

@@Corey-pd3mi doesn’t change a thing. Ads are based on your Google algorithm not the actions of others watching or even the content of the video. Try using a VPN and run ad blocker in your browser. 👍🏽

[@mj_aussie_coaster_travels8310]

Premium…. No ads here.

[@BikerBondRavi]

Your 7 days Australia Dirt tour was awesome sir. Loved every minute of it 😊

[@Bonanno13]

Just installed the ralley dash on my US model and it is flawless!!! Thank you for making it internationally available!! CHEERS.

[@snozed9994]

Mate, this is so neat, very well done! I mean, how amazing are you, the riding, the narrating and now the building! Truly awesome mate!! You make me want to get a T7 haha ;)

[@user-co4ey6mm3e]

thanks for another great video - im now at the point of purchasing a new T7 - its great to see your videos - everything i need to know from a down to earth - no bullshit guy - THANKS

[@taswr]

I run on my world raid the Garmin Montana 750i, but I mounted above my speedometer and sideways on the crossbar. I did this as I find the Montana has better usable display sideways, i can also adjust the angle with help with glare. I also incorporated a quad lock dampener in the mount. I then just use the usb cable to bike socket for lower. Works perfect.

[@PK-71]

Hi, got my stabilizer mount today. Took one week to get from Australia to Finland, super fast delivery... took one week to get Ktech springs from Sweden to Finland. Product looks great! Looking forward to getting it mounted.

[@John-cg1sx]

Hey there ! Are there any cool places to ride an adv bike in Finland ?

[@Gravelcruiser]

I dont have a T7, but if i get ine, this will probably be my first purchase for it. Great design

[@DavidGibson-se1ev]

Nice bit of gear Adam well done Thanks Dave

[@stevedehe6519]

Can you get this for the warhorse as well? Your movies inspired me and I bought mine last week.. mine, as well as your yours have the inner beauty and character demanding respect and admiration.. love it so much 😅

[@bretthawton]

Elegantly simple solution.

[@fikramkajilijili]

good product with good information

[@Grazzo77]

Good stuff! Almost makes me wat to get a T7. ;)

[@truthbomb1809]

awesome dude! The ducati desert x could use one of these brackets.

[@samhill3496]

Good product and vid. Now when USA gets World Raid if ever I'll have one.

[@retiredwaterdoctor]

grear product....thanks

[@MartinHubbard1]

Fantastic looking product, wish it would fit my Tiger 900 RP..lol

[@Ryzza5]

Bro is a professional massuer.

[@tompahamilton]

Throwing in my enquiry for a camera gear episode. What you're using to film, how you pack it and things to think about while filming these kind of adventures like "The Warhorse". Sincerely yours, a fellow Enduro/Adventure rider.

[@WikstromADV]

Looks reel good 👍🏻

[@Trails07]

Nice mount

[@Kelly-oq9nh]

Would love to see you acquire a 701 and go through a building process.

Installing now and seeing a bit of contact between the speed and the tower. Hopefully nothing to worry about? Can’t get it to sit any lower.

[@paulchristensen6722]

Would be good to find a mounting platform for the Desert X

[@ParallelTwinWings]

wanna hear your opinion on the transalp.

[@milosbosnjak4278]

Isn't easier to mount something like this "r12-bar-clamp-amps" It will raise the device towards your point of view a little bit more, than the regular t7 display height.

[@Whiachy]

Did you put anything on the backside of the screws holding the GPS mount in place to prevent them from backing out or are the bare tips just poking out?

[@Real1198]

Hey, does it work with the Garmin Zumo XT ? My T3 is a base, so its the other stabiliser plate. Did you tried with the Zumo ? Thanks

[@dalehatton6965]

If only we could get the speedo and the GPS reading to be the same! 😂 10% out at 100kph is pretty annoying when on the road.

[@ellerdschippers]

You can put an other abs ring on your front wheel hub to get that problem solved.

[@dalehatton6965]

@ellerdschippers No you can't, I tried that, and you need both front and rear, but even then that doesn't work as there is a gear reading that throws faults and confuses the computer when to go into eco-mode, it dramatically increases fuel consumption as it makes the bike run rich.

[@cryptocalypse6969]

My option is the small rugged tablet with the Osmand app.

[@felixrembold1859]

Can you do wheelies with the warhorse too? Jump over trunks like with the T7?

[@MotologyFilms]

The Warhorse can be forced to do all of those things, but I don't want to hurt her ... so I've stopped that kind of behaviour when riding the old girl. That doesn't mean I don't let her eat. I love revving the motor through the gears on epic dirt roads. Never gets old.

[@gregbrown5473]

Awesome mount Adam all I need now is a T7 to fit it to and do you know if it will work with BarkBusters ..

[@captain_bretzel]

Same question from my side. I know it's impossible to test with all aftermarket handguards but the Barkbusters are so popular, I wonder if anyone has a clue if the mount would fit with them?

[@OAK_MTN]

Does anyone know if it fits with barkbuster handguards?

[@smacnee3278]

Nice piece of kit. Do you run a wired amp clamp that powers your Montana? Or how are you powering the 700i? Thanks

[@MotologyFilms]

Yeah mate, that GPS bracket runs power cable back through the TFT hole and then down direct to battery 👍

[@marcomancarella6551]

Sorry Adam...what's the name of God bracket? Thanks for all💪👍

[@nwbasson]

Is the instrument loom just too short to run the cluster ti the right side?

[@bryansuperduke1290r]

Need one for the older T7 but been out of stock on website, are you going to make them again.

[@MotologyFilms]

They are in stock ready to ship mate.

[@adamlee581]

Were they tech screws? Mate

[@Bovrinox]

thats insane to me, only ever spannered old bikes. like my trusty 98 rd07a africa twin, that speedo is like an ipad or something!

[@ericunderwing]

Clean as fuck.... 😅 Really like that. Would be nice for a phone mount there as it's about the same size as the screen. Do you have more plans for add on bits?

[@John-bx8iz]

Hey adam, does this work with barkbusters? Id get it then, but having it sent here to germany without knowing is a bit of a risk... Hipe you can help. If barkbusters fot, all others should fot too, ghey are the bulkiest handguardss i know

[@John-bx8iz]

Wow, sorry Guys for my horrible spelling. Must have been drunk or sth. Anyways, I ordered the Product and I have barkbusters fitted. There ist enough space, so all good!

[@yatu1crissdeusername]

@@John-bx8iz Hi. I just saw your question after posting the same one. How close is your bark buster guard from the TFT display? Thanks

[@John-bx8iz]

Hey Phil, it's pretty close (about 2mm) , but it won't ever hit as long as the barkbusters don't move. So make sure they stay solid. Even if the bars bend, I think there is enough clearance.

[@yatu1crissdeusername]

Hi Guys, does anyone run this upgrade with bark buster guard? It’s does seem that it will clear with the new display position. Cheers

[@hartingtonlad]

All good with bark buster vps hand guards fitted. Plenty of clearance

[@anthonyhorgos7070]

Hi Adam, really interested in one of these for my World Raid, ive got the bar mounts spun around to open up the cockpit (im a tall long unit) so the bars are closer to the dash, do you think there would be clearance issue with this setup? Cheers

[@MotologyFilms]

Hi mate, even with the bar clamps spun, The handlebars themselves should be well clear. However, I suspect whatever hand guards you are running may contact. In my experience, most handguard mounting brackets are way longer than they need to be and hang off your handlebars like bull bars. Plenty of people have purchased our mount and modified their handguards to suit.

[@anthonyhorgos7070]

@@MotologyFilms excellent thanks mate, im just running the factory hanguards so it shouldnt be a factor, ill do a couple checks and pop an order in.

[@timbrownridge5022]

I’m running barkbusters and wonder if enough clearance

[@MotologyFilms]

The TFT is much thinner than the original version. You have to shorten the inside barclamps of the barkbusters, as they are very long.

[@TheRiderGuider]

kzbin.info/www/bejne/mZ2tZpd_YqZnrpYsi=CcjAtrWFHpa3Szqg this shows what you can do to fit with Barkbusters 👍🏼

[@patrick87100]

MORE WARHORSE PLEASE⚠️

[@bartoszjanota9962]

But what's the problem with the wobbly speedo? Isn't it that it's done this way by purpose? Otherwise, Yamaha would have done it differently and made it stiffer? I'm riding mine Tenere, speedo is shaking, true, but it's all fine. I agree with the GPS position, I mount mine on the bar on the tower and it's even higher.

[@dirtysv]

You say the word “legend “ a lot to describe wonders of the adventure world…. Have you read the Alchemist!

[@pedrofernando176]

👍🤙

[@lukimy2704]

Not going to work with Tusk hand guards, unfortunately.

[@argentum_on_glass]

my comments never pop up.. strange....

[@MotologyFilms]

I hope you're seeing this comment you left? Thanks for the subscribe mate

[@argentum_on_glass]

i did . did you saw the link i posted? it's about an aluminium rally tower for the t7 and W-raid...?@@MotologyFilms

[@LMO169]

Somehow you have a familiar face, but I couldn't designate it to somebody. Now it made click. Are you by any chance the son of Chuck Norris?