Checked power and grounds to ECM and everything checked. Was able to communicate with airbag and ABS modules with scan tool. Just had nothing from the engine control module. Hope this helps anyone else stuck on a real mind bender.
Пікірлер: 37
@justincase91738 ай бұрын
Man you saved me alot of money. Lexus quoted me $2000 to fix it on my gs350. I found a new OEM sensor on ebay for $148. Less than an hour to replace. Good stuff...many thanks!
@SkillCollectors8 ай бұрын
That’s awesome dude. I’m really glad this short was able to help out!
@WRECK756 ай бұрын
Gratzie!!! Gratzie!!!
@user-ge1yv5dm9b7 ай бұрын
Thank you bro ❤
@ImranSheikh-uc1wc3 ай бұрын
Unplugged it, still no crank. Any advice?
@bigredfubar7 ай бұрын
Dealing with the exact thing right now.
@lloydharry5 ай бұрын
what is I already replaced the FPS and the problem is same? any sugg. ??
@jorgemoore64714 ай бұрын
Did you ever figure out I have same issue I replaced it already and nothing happened
@jaimerivera25459 ай бұрын
I have a 2007 is 250, every time I try to start it after a fill up, it will crack bot won’t start, I have to wait for about 10 minutes to try it again and then it will fire up. It only happens every time a fill it up. Could it be something related to the fuel pressure sensor? I already replaced the canister purge valve. It wasn’t doing it for sometime after replacement, but it started doing it again.
@SkillCollectors9 ай бұрын
Hmm, odd problem, I don’t think it’s this sensor as this is on the high pressure rail. Do you have codes?
@user-gw8ve8uj2w8 ай бұрын
My Mini Cooper did similar thing. Wouldn't turn on after it ran for 10-20min. Had to wait for it to cool. Then it ran again for 10min. Turned out to be the high fuel pressure pump. Which idk if your car has one. But I would make sure that's not it. Good luck
@justincase91738 ай бұрын
That definitely sounds like an evap problem.
@desireehutchison11 ай бұрын
My car will crank but won’t start could it still have something to do with the sensor
@SkillCollectors10 ай бұрын
Most likely not, this sensor will usually cause it not to crank at all.
@user-gw8ve8uj2w8 ай бұрын
Can you test the fuel sensor without removing it?
@SkillCollectors8 ай бұрын
Not that I'm aware of, maybe someone else can chime in.
@MontyGS3016 ай бұрын
Literally dealing with this right now. Did you have to take off intake manifold to unplug or only to remove? (2007 gs350 awd)
@SkillCollectors6 ай бұрын
I was able to unplug without removing the manifold, it was a PITA to get to the plug though. Just gotta be patient and cool down when you start getting mad hah.
@mikemartin342510 ай бұрын
Quick question were is the transmission dipstick localed because i cant find it ?
@SkillCollectors10 ай бұрын
No dipstick on that car. Has a procedure using a level check plug on the transmission oil pan.
@awgericardo53148 ай бұрын
I have a 04 gs300 , I changed coils but the coil wiring was messed up on the first pack , so me and my friends tried rewiring it and it won’t start anymore , is it fixable ?
@jessitrd471829 күн бұрын
Did you end up fixing it?
@RenaeE354 ай бұрын
My es350 won’t start or crank I replaced the battery and starter could this be the issue
@JohnnyPadilla-dp4bfАй бұрын
Any luck ?
@vainanthony98944 ай бұрын
My gs is doing the same thing, only difference is my car cranks no start. I was driving slow and engine shuts off no warning of any kind.
@SkillCollectors4 ай бұрын
If it’s cranking it’s going to be something else. You gotta check for fuel and spark to rule those out.
@bigdogsgarage5 ай бұрын
Can you unplug it without removing intake to test it?
@SkillCollectors5 ай бұрын
Yes, it's not the easiest thing to get to but it can be done, it's sandwiched against the firewall.
@Koala_z06 Жыл бұрын
How do you diagnose that random problem.
@SkillCollectors Жыл бұрын
If you have these symptoms, then you unplug the sensor and all of a sudden it will crank and you can connect a scan tool.
@betoskickz Жыл бұрын
I tried this last week on my is250 and didn’t work I think my problem maybe the fuel pimp.
@Drewski009 Жыл бұрын
@@SkillCollectors think I have this issue but my scanner now keeps reading 0 code. My engine almost catches a start but the lights in the car flicker or dim if the radio is on or the dashboard light is brightened. I sprayed starter fluid in the intake still no start . My battery died so I bought a new one and within an hour that new battery died as well.
@terrymorton3218 Жыл бұрын
Yeah my car too
@gabegarcia777911 ай бұрын
@@betoskickzdid you have symptoms before hand? What we’re they?