Lexus IS200 - IS300 Toyota Altezza -- customize Headlights - How make it Black

[@timocallaghan4408]

Awsome that the projectors and indicator are separate, perfect headlight to do this.. no masking required!

[@Danzely]

thanks a lot g, if someone wondering i puted lamp in the heated oven, 150 celcius for 6 minutes

[@Grubczyk]

Yup, I tried it like he says and it worked for both headlights

[@sergeyandreev2599]

Very helpful for my 3d project. This 1 video beats all photo references

[@monkeyhighRTD]

how did u seal those headlights back together? any sort of sealant used

[@aoug1595]

He re-used the original one by putting it in the oven to make the glue stick to the front

[@rhubarbpie2027]

Please update and denote the oven temperature in degress Fahrenheit or Celsius/ Centigrade so people don't burn their house down.

[@typesgsr]

Beautiful video man. So at the end you placed them in the oven. What exact steps did you take? Are you using more glue? Were they together or separate?

[@clov3zz860]

200c or 200f?

[@monkeyhighRTD]

200 Celsius or Fahrenheit? I melted my lights with 200c

[@hanavaclub8069]

Hey hat das schon einer mit den Xenon‘s gemacht und kann mir mit Rat und Tat zur Seite stehen?

[@Qwertyuiop-123]

Where to get original IS200 lamps? Please HELP!!! Your headlights is in perfect condition! I am looking for a left pre-lift to the EU and i can't find it and if they do it they cost 1/5 the price of my car.

[@theogrobler1347]

200 degrees celcius or ferenhite ?

[@LordToxygene]

If that was celcius that would be almost 400 degrees Fahrenheit and I don't think you'd want the headlights to be baked at that temperature. Doubt they could handle that heat. Remember you're just making the adhesive soften.

[@mr.warhead9166]

Bake at 160 degrees celcius at roughly 7-10 minutes👌

[@dealonmatthew1928]

Worked for me...looking great

[@brentstrong2568]

You cracked the lense??

[@dascentlounge8763]

Brent Strong yup he did, I’d suggest a heat gun around the edge rather than baking it 🙌🏻

[@clov3zz860]

@@johnmendoza9906 he cracked it

[@johnmendoza9906]

@@clov3zz860 it was sealant that got onto the lens. When he cleaned it, it came off.

[@5theshortone]

watch the whole video before commenting

[@lencsesdavid419]

Hi! Where you bought the clear turn signal lens?

[@shizukesajdm]

He didn't buy a clear one, he just removed the old one and left it empty.

[@lencsesdavid419]

@@shizukesajdm Thanks. 🙂

[@CreativeMindz240]

What grit of sand paper did you use ?

[@typesgsr]

It’s a steel wool.

[@shizukesajdm]

@@typesgsr It's not, it's scotch-brite.

[@c33jp]

Thank you legend!!!!

[@godzillanismo4892]

The bake cracked the lense

[@Crazy65pt]

I think its melted glue that run down the lens. Because in the end there are no cracks in the lens.

[@mursone]

you cracked the lense :(

[@306s16]

it looks like the sealant glue has got on the front from his gloves id say.