Lexus IS250 Engine Overhaul (ZLA)

Performed by Robert Nitzky (Lexus Master Level Technician) at Lexus of Atlantic City

[@fast987779]

The V6 engine of is250 is an amazing artwork and I am so pleased to own an is250.

[@gabrielfranco9786]

Same, I just bought a 2006 IS250 6spd manual. The body is 👌🏻😘🤌🏻 both underneath and outer. Interior looks complete but if you look closely it does need reupholstering but it can get away with out it. I’m so happy to own this car because these are becoming rare to find. Especially in good conditions.

[@leonel9110]

@@gabrielfranco9786I got one too recently with a lot of miles but still drives like a dream just wished it had a little more power

[@king_phantomprojex]

@@leonel9110 tune it

[@Driving_Somewhere]

Just such a liquid smooth motor isn't it.

[@gabrielfranco9786]

​@leonel9110 I agree, I also wish it had more power. It takes forever to get to 75mph on the interstate. I'm thinking about swapping a Lexus 5.0 V8 engine in it. It'll cost me a bit, but it'll be cheaper than buying a whole Lexus RCF in good condition. Plus it's something I can say I built.

[@tomelsasser9648]

This is beyond comprehension for most and I'm not totally convinced you're not an Alien! Thanks for sharing!

[@tonycaputo2966]

This so cool, I am a Lexus Master Technician up here in Canada. I just performed this exact job 3 weeks ago and I wanted to record it like you did, but I didn't take the video. So thank you very much.

[@MrUnknown747]

Tony Caputo you in toronto?

[@tonycaputo2966]

Ponyboy glad to hear from you, not Toronto but Close enough I'm in Ottawa

[@jeffgrant7113]

What would you change for a service like this?

[@avneetnarayan2006]

Hi, would you have any idea why the IS250 Engine would make tapping noise ? It’s not from the injectors tho

[@tonycaputo2966]

Avneet Narayan what year is the IS250, is the tapping at idle or under slight load

[@xlex.the.menxce]

Epic video! Thanks for sharing. Tech skills 10/10.

[@adeelcyril3339]

Simply awesome dude! The way your working on this car...you could work on any engine. Meticulous craftsmanship! Next a 458 Italia!

[@tumbadevitarte24]

Very well done. Congratulations, very professional and clean

[@BiddieBoi]

Having done this myself you make it look like art!

[@Robstruct]

Thanks man! I'm uploading some recall vids soon

[@subiebui]

Robert Nitzky i've done a bunch of these and my bay is always a mess when im done. i dont know how you keep it so clean lol

[@TheGambinoo]

Robert where is your shop located?

[@rm1179]

Robert Nitzky I need you for an is250 misfire lol.. wish I could hire you 👍🏼

[@matthewlee4999]

I remember when this stuff was called industrial arts.

[@mrredpill3121]

That's working in a shop, the challenge for the people do it at home.

[@asmongoldsmouth9839]

Beautiful work. Over the last 25 years I have rebuilt MANY engines from 1.3L 3 cyl petrol to 351, 454, 572 cid to 16L i6 diesel Cummins, Detroit, CAT. You did an AMAZING job. Tbh while the engine was stripped down, it should've gotten performance parts 😉 LoL

[@andresalejandroperez7863]

I have an is250 2006 with 203k miles on it and it is a very smooth engine, its 0-60 is performed in 7 seconds and no engine problems that all

[@besticio9552]

I own a Lexus IS200, it is certainly not a 250, but the engine, although it has 420,000 km, still works, and I must say, it has been used to the limit day after day, with several drifting sessions... excellent

[@villainsneverdie5160]

most cleanest video ever seen. its like an art

[@msarte5661]

This guy work like a machine

[@kalindambozi2356]

nice video. i love doing this job

[@tintohizzie6482]

Damnnnnnnnnnnnnnnn! bro you dudes rock!!! I've had this done to my car under recall.. WTF.... bad a$$.. I hope you guys are getting paid up in tha 6 digits!!!

[@notorioussouljur]

Mad skills right there, great job

[@Robstruct]

Thanks!

[@hamskyxxx]

This video gave me goosebumps.....

[@matthew999c]

appreciated, very professional

[@nicaman96]

beautiful job

[@borawang008]

so clean!

[@harborareatech310]

Great video hope your still wrenching just did this on LS500 AWD.

[@wiel-spin]

That's an AWD if anybody was wondering. I noticed because on mine the motor mounts need replacing and on the AWD's these are different from RWD models.

[@kathmandun8749]

you are a beast, amazing

[@bosmanragga51]

What a great job

[@skbenergy]

impressive i love this video....am from the Caribbean i have a Toyota Mark X 2008 that uses the same engine the 4GR FSE that's in the IS 250's ..i would love a tear down like this on my engine for good maintenance :) !!

[@TheBignasty32]

Man, that is crazy. I didn’t realize how big this engines are for a small car. Well, midsize.

[@darrenteoh1880]

i like this skill and guys..fabulous

[@Rudovic100]

Respect. I'm driving the GS450h 2006. For six months, I have a car problem, and no master can find me a problem. He does not report any mistakes, but he has a problem. It's about when I drive it a little faster, after 30-40 kilometers, the car starts to lose power at the moment when I add it to the gas. This power loss is felt in the first 2-3 seconds, or until it reaches 150 kw, then it has total power. At that moment, it started to empty my hybrid battery and pulled it to the last dash, and it is very hard to charge. I have to stop, to turn off the car to cool down a little and then everything works normally, until I come back again. 30-40 kilometers. The battery is new, I changed the pump in the changer, lots of things that I thought I should replace, and again I have the same problem.

[@skengman]

shop floor immaculate ...god tier technicians.

[@neilfreytag9166]

I've done a lot of these ZLA's. I enjoyed doing them but I don't miss the warranty pay.

[@Bilalnwo]

I have the same car. Almost 90k miles. Carbon build on engine valves is my concern. Currently installing an oil catch can as preventative maintenance

[@sebasgutposada6959]

Beautifull!

[@danielortega1803]

I just want to say absolutely cool video amazing work now I remember why I stay to my simple caveman ls1 🤦‍♂️

[@tomas93120]

Tres bonne video

[@idaman71044]

I've done a few of these at my dealer. i wish we had that eng/trans dolly u have. i like doing them, but I can't beat the time, especially since they lowered it.

[@raider762]

Clever using what looks like an A4 filter case to hold the valves, I will have to use that trick later.

[@andrewvillanueva4222]

l just brought a used lexus ls460l 2007 and it is a beast and smooth running car!

[@madbald4635]

Such a luxury to have an open stall/space for jobs like these

[@andrewvillanueva4222]

my lexus ls430 2001 has 266000 miles. original starter and alternator. just replaced the radiator it was leaking. regular oil changes fluid changes, new brakes regularly, spark plugs and new belts and water pump every 100000 miles. it should last over 300000 miles.

[@besticio9552]

I own a Lexus IS200, it is certainly not a 250, but the engine, although it has 420,000 km, still works, and I must say, it has been used to the limit day after day, with several drifting sessions... excellent

[@SantoshThakur-fh8kx]

Very nice wark

[@georgemwangi2617]

love it love the music too, who did that song?

[@bitdigital8052]

True Master Tech.

[@onyedikachioko2488]

So much for a rack time! good job, how much does this overhaul cost and where can one get this service in houston texas, my 18 ghibli is about to die just 40k miles, need to save the engine and not deal with the cost of a new drop.

[@ZeVillain]

FULLLY SICKKK, that is all

[@charlesbullock6541]

Wish you could give me connecting rod bolt torque specs for this engine. No one seems to know . Nice job on overhaul!!

[@munsurahmed5585]

Tht rebuild was quick

[@nathanield.4527]

I envy your skills! Bad ass!

[@caspermayne]

So precise work, but I ask this: Why? It looked alright to me

[@recarmotors2842]

Hello, how are you. I'm about to make a 3.5 v6 camry engine, can you tell me if you use struts under the swings, or if they go straight into the valves. thank you

[@austonlewis9574]

What all did you do? It was so fast. Like did u just rebuild it or do upgrades as well?

[@NCLme]

How many hours was that homes....that was amazing

[@TBAGGZ1]

Excellent work Robert. Question for a potential buyer of a used 2012 IS250 with 88k is this a good time to overhaul or should I wait till 115-120k? I'm thinking I should ask them to perform the service as part of the deal to buy.

[@ddpp3492]

This is the stupidest question I have seen on KZbin ever.

[@kathmandun8749]

You are a beast, amazing

[@ndrsg3013]

What are the cost and benefits of an overhaul? Which milage is it recommended to do? and the main reason to overhaul an IS250? I have one 2007 IS250, and might possibly do it one day if it is worth doing

[@rusgoverment]

зачет профессионалам

[@MonochromeParadox]

So cool...

[@HANGLAROMA]

oh god u the real beast ):!!!

[@princeraja]

What’s the secret to get the timing cover off? I’ve got all the bolts off but it won’t budge from near the bottom.

[@face08012]

More videos !!!

[@Robstruct]

I'm working on them now!!!

[@adrianmacias3992]

How long did it take you to get to where you are now?

[@jernejkos6593]

Awesome! But how much did this all cost? :D

[@angelwalker.]

How many hours of labor you think its to do what you did but instead of taking the motor apart. just swapping with one that will also come with all the same parts on it. Because my is350 engine locked up and the engines come with everything like the intake makifold already on them. Looks like they just drop them and disconnect whatever is connected to it

[@honestycounts9352]

Just pull the hose off of the Positive Crankcase Ventilation 'PCV' valve, and leave both of those OPEN, that way you don't get oil vapors from the crankcase sucked into the intake tract. That is what is getting deposited on the intake valves.

[@Robstruct]

First of all, the PCV system is necessary, and as a professional I would never just "pull off hoses" and leave it that way. That is no solution. You are correct that some of the valve deposits are from the PCV system. However, the new pistons and rings are redesigned to have less blow by, therefore causing less crankcase pressure. Inevitably leading to less valve deposits. It's also important to know that any direct injection engine (without port injection) will have valve deposits, that is unavoidable. The valves need to regularly cleaned and maintained with upper engine cleaning services.

[@MrKaaz]

I have a 2007 gs350 with the 2grfse engine 134k. It runs wonderfully still zero issues. Except, it does have a knocking sound like a worn rod bearing knock sound. I found that listening with a long screwdriver at the valve cover area near the high pressure fuel pump is the loudest knocking by far so not actually sure it's a rod bearing. Do these fuel pumps knock? Do these lifters or rockers go bad and knock? Thx community.

[@laserbeam1k]

Is this for the CSP or Recall? Top engine cleaning ect? I took my car in for this after awhile the transmission started acting up. It wasnt noticebale at first then it got serious. with a torque converter problem. Many users have reported the same issue. At about 150K now.

[@mingstersol]

NIce, well this is a lot of work for a IS250. I have brand 4GR-FSE new long block direct from Toyota for sale if anyone needs one. 4 available and very well priced. Fraction of what the dealer will charge for a rebuild.

[@thanhthanhnguyen5738]

haha , My IS 350 got a broken valve, Lexus Corp took care that prob for me when it was 140K now 275K the car is still running smoothly, Thanks for Mechanics Tony B. at Escondido CA

[@spectrumlightpvp9214]

I know this is a 7 year old video, I am also in the process of swapping out my motor 2GR, by any chance did you leave the wiring harness connected? I don’t know what else I need to do to drop the motor, currently took off the front wiring but I haven’t touched the back so I don’t know if I can simply disconnect it from the main box and drop it with the motor

[@DJ12Ema]

Excelente video man, is this engine reliable? I just bought a is250 2007 with 145k miles on it and so far a love it really smooth engine

[@MrUnknown747]

DJ12Ema hows your car been?

[@MandusahRamirez]

I have a 2006 is250 with 219k so yeah it is lol

[@wiel-spin]

Bought an is250 with 265000km. Only replaced the oil and i think i need to swap motor mounts soon. Other than that it's running strong.

[@libertatusinperpetuum2046]

These engines, provided the owner follows the proper mileage/maintenance schedules will last a LONG LONG time. Remember, its a Lexus. The Japanese are very careful when they build an engine and they want the customer to be happy with the product. Unlike so many US manufacturers who want you to buy their cars made with mexican/chinese made parts in their cars and after you leave the dealership, they forget about you but are awfully glad you left your money with them!

[@user-di2op3uw4r]

Круто 👍🏻

[@RaneMP2016]

Womder if this was the same type of repair as the recall for rough idling issue on my 2009 is250

[@MrChrisproductions]

Any advise on how to go about overhauling an 08 ISF?

[@khairolizzan1195]

how much does it cost to rebuild that engine plus labor work ? just wanted to know 😅.

[@honk3x]

Say if you want to do this to your car do you just take it to a mechanic place an tell them ?an how much would you say the price will be?

[@gerardodonaire699]

Nice video. Can anyone tell where I can find some torque specifications i have a 2007 lexus is250 for example valve cover torque specifications i can't find any info.thanks

[@omargutierrez1109]

I have a doubt. The VVTi engine 2GRFSE is the same VVTi at engine 4GRFSE? The mine is damage and i want to know if compatible. Thank you

[@jefferysimpkins1553]

Hopefully the driveshaft flange bolts were properly tourqed this time.

[@woloszyk3]

what was the course. had crashes? Replacing only the piston rings

[@JVBL1]

My head gasket blew and the motor won't start. What should I do?

[@arilin1445]

Can this be done without pulling out the engine? Just take off the heads and oil pan?

[@slowcaddy7914]

so the best way to get the engine out is from the bottom ?

[@stardust-rd6mr]

It will be cool is port and polish. Higher compression pistons. If possible

[@inthetoilet4456]

I have a question. If you went to college what did you major in? My dream is to be in the automotive field; preferably a technician like yourself.

[@1974lakers]

Engine Overhaul what is the cost ????

[@jonienglish3231]

why the the engine need work how many flat rate hours did it pay , 20 hrs

[@ndrsg3013]

Brand new now.

[@rickgonzalez7558]

Can a motor from a Lexus is250 2 wheel drive go on an all wheel drive ?

[@dustin6114]

How do you like your job? Is it worth being a tech for this company?

[@jasonablah7702]

Labor costs have to be worth more than a brand new engine I'm guessing? Great video.

[@raymondcruz2000]

I was thinking the same thing. Doing a cost analysis would show what is more cost effective. Either way it should have had a long block put in or if they wanted to stay with that motor send it to the machine shop. I didn't see any measurements being taken. They didn't lap the valves. At least it's not in the video. I would have asked for a factory long block. Other than that, I would have brought a new car

[@hjunnaid]

How many nuts and bolts were extra then?😉👍

[@ginaghgfysfghbg7044]

How much did this particular overhaul cost?

[@lucpoi6094]

Hi Robert I think my low mileage with short distance is probably considered as severe. I own an is250awd 2009, and I have only 55k KM (34.4K miles). I am living in canada with temperature ranging from -30C (-22F) to +38C (100F). Most of my rides are less than 5 miles each, mostly city driving (50%). What do you recommend for warming time in winter before moving the car ? What oil change schedule should I follow ( I use Penzoil synthetic oil twice a year) ? What are your driving and maintenance recommendations.? Should I expect a shorter engine life before a rebuild is required ? regards

[@fahhad17]

use regular thick oil, 5w30, always use 91 gas,

[@adolfdiaz7019]

What is the cost of that whole work being done

[@evertonb3031]

Hey what’s the cylinder head torque specs?

[@angelwalker.]

How long to drop engine and put back together without opening the engine? Just swapping another engine.

[@alejandrosalazar1897]

16 hrs

[@Lexusofatlanticcity]

AWESOME VIDEO!!!! CAN WE POST IT ON OUR SITES AND TAG YOU???

[@Robstruct]

Go for it!

[@scottymsu6063]

Won't it be better to go for the 3.5l v6?

[@dennissellsdfw4268]

I think the IS 350 is also affected by faulty rings Issue & possibly carbon buildup as well...Started noticing some oil consumption at 65,000 miles adding 1 qt after 2500 miles. Gradual increase worsening over time...Now at 3 qts after 1100 miles. Vehicle at 150k. Lexus working with dealer to participate in repair, though major portion of estimated repair would be paid by owner. Seems as though there is enough support, as noted via this website, that Lexus should be more receptive to covering major portion of repair costs. Suggestion to all IS 350 Owners, start checking your oil levels. Don't wait for low oil light...Mine never came on during entire Consumption study.

[@neilfreytag9166]

I have never seen a carbon issue on the IS350.

[@alb12345672]

@@neilfreytag9166 Not carbon, but the rings start to stick. I used penzoil platnium, it is supposed to prevent that.

[@neilfreytag9166]

@@alb12345672 The ten years I was at Lexus (2007-2017) I didn't see that issue on the IS350 or GS 350(direct and port injected). I'm not saying it's impossible I just didn't see it. I did see clogged and stuck rings on the IS250 and 2006 GS300(both direct injected only). The oil control ring on the IS250 and 2006 GS300 would be completely filled with carbon which would cause excessive oil consumption and misfires. Not to mention the carbon issues on the intake and exhaust valves.

[@alb12345672]

@@neilfreytag9166 Thanks, So I guess my 11 GS 350 is safe. But the dipstick is about 1/2 down at the 5K interval. about 100k miles.

[@neilfreytag9166]

@@alb12345672 Do you change your own oil? Most dealers won't fill the engine to the full mark. The oil usually ends up between the lower dot and half full. If you are starting with your oil level at the full mark then you are only loosing .5 qt every 5k which is normal. Driving conditions will change oil consumption. City driving in my experience consumes noticeably more oil than highway driving. Also don't baby that engine. WOT once in a while is good for it.

[@Studio57production]

Which state are you located in?

[@aljan5047]

I want you guys to do the same on my 06 lexus IS350. How much?

[@Bilalnwo]

How much would this service cost roughly?