I HAD TO CHANGE MY 7MGTE VALVE COVERS...

FOR ALL CAR PARTS, TOOLS ETC USED THROUGHOUT THE CHANNEL THEY CAN BE FOUND ON MY AMAZON STOREFRONT LINK BELOW!
DISCLOSURE: i often include links to products & services i regularly use on the youtube channel. This means that if you click on one of the links or the store front link in this description and make a purchase, the channel may receive a small commission, with no additional charge to you! Thank you for supporting LFATV so i can continue to provide you with free content.
*PARTS: amazon.com/shop...
Equipment:
canon 70D
Macbook Pro 2016 - amzn.to/2tAjgLc
Dji Phantom Standard - amzn.to/2uApHuM
Iphone 7 plus - amzn.to/2shg8jA
Cheap Tri Pod - amzn.to/2tgfUdH
Music by: @dcuttermusic / www.davidcutter...
Follow me on Social Media:
Facebook: / luis.arreaza.589
Instagram: @ LFATV

[@Stiefe300]

Hi, i also de debaffle my valve covers for a completely different reason. If you sand them down or sandblast them, debris clogs up behind the baffle. My engine builder (60+ years old) always tells every one not to paint their valve covers unless they are 1000% sure everything is completely clean, because the residue behinde the baffle kills a lot of engines. Better said it kills the oil pump first and then the Engine. He showed us every oil pump from every engine he rebuilded, which got killed by sand particles. Reason: The Oil filter just catches the particle which would be pumped to the bearings. But the oil pump has the Bypass for the oil regulation. So sand can travel a lot of times through the pump, also expecting the oil filter is perfect in doing its job. As you also noticed you should reinstall the baffle, that the cam shaft doesn´t thrown the oil out the PCV Hose. Drill and tap for little screws with loctite or weld a little hill back on it and press it down with a press like oem. If you don´t trust little screws in your engine, you should know that crank shaft oil channel endings also get tapped and secured with little m3 or m4 screws.

[@-LFATV]

Ima pin this

[@tonyhallakabajan2jzmk3]

The all black is cool, but that blue is beautiful

[@adriansupra91mk3dominguez7]

Thanks for shout out! Always bro , hey thanks for the adult beverages I had sweet time at BBQ

[@-LFATV]

Ha u got it brotha

[@sjh9812]

Looks great! Good luck with the clutch install. Just had to pull/reinstall my r154 twice. Hell of a job, both times I walked away sweaty and cursing. No fucking room in that trans tunnel!!

[@-LFATV]

Yea im not looking forward to it lol hopefully i can get some help

[@aislin9152]

I drilled out the rivets on my baffles and tapped the holes so I can remove them to clean and just bolt them back in (locktite for sure!). That way I was able to make sure there was no crap behind the plates and also can add some stainless scourer packing to aid in vapour condensation pre catch-can

[@-LFATV]

Thats a good idea, i didnt even think about that

[@jbrou76]

All black. But since the cover is winkled. Make the lettering a different finish black. high gloss, satin, etc.

[@-LFATV]

That’s a good idea

[@jbrou76]

I just bought a black 87 turbo. Got a deal I couldn’t pass up. I’ve binged watched your channel over the last few days while working a turnaround. I can’t wait to put another 7m back on the road! You’ve definitely earned this subscriber. Keep up the good work. Never stop learning.

[@bensupra28]

Def all black, with black cam gears and timing belt. 😉

[@-LFATV]

Not changing the timing belt 😅😅

[@shanejzx1002]

I was hyped when I noticed you dropped a video bro🔥

[@-LFATV]

Few for the past few weeks

[@bradjordan6984]

I'm thinking you should do the lettering and lines on the covers in the same body paint color. mmm mmm goodness just a little subtle touch to match

[@Bawkr]

I remember when you got that head, feels like 6months ago to me I did watch it fresh though. Time flys. Edit: I like the blue hints to it, looks good. Silver looks good too although just blue would work as well. Looks kinda lazy as is even though it's a bit more stealth I suppose.

[@-LFATV]

I might do gloss black lettering

[@Bawkr]

@@-LFATV my .02 on that maybe a midnight/navy satin/matte blue or a dark grey. I think the gloss might be a waste of time not really change it much. Course neither of those will match the cap or belt. That said though when I get a chance I'm going to start running timing covers when I can: 1. New radiator hose ate up in a wreck onto cam gear. 2. On my aveo spark plug cover bolts went into there while driving, nic'd my aftermarket belt. Both pretty fluke instances but they make me realize having the top open while the bottom is sealed acts as a container to hold debris.

[@adriansupra91mk3dominguez7]

So beautiful

[@kevinsouden7708]

Blue looks really good bro matches with the belt 👍

[@nikolaiylimys5250]

Always a pleasure to watch these. How about putting same color to the valve cover details as you have on your shock tops? Would match pretty nice together

[@-LFATV]

I actually dont like the color of the shock tops lol but good idea

[@justbeastit]

You should paint the lettering IMO.

[@-LFATV]

Yea mixed emotions lol

[@BPEKSupraInteractive]

I LOVE the blue accents on the valve cover. How do I start doing this for my supra?

[@-LFATV]

Its just blue oil based paint layered on it

[@bolivarharrigan6027]

Just watch his earlier videos, I remember watching it in detail.

[@alejandroibarra1652]

Somos pocos pero locos 😜 I like your videos, 👍

[@ismaelalvarado706]

Nice video. 👍👍 I have supra 1986 I would like to put something like that in the spark plug area but the throttle and the air intake hose is on top. Supra no turbo. Do you think it can be fixed..?? Thanks

[@-LFATV]

@@ismaelalvarado706 yes but you would have to change your entire setup to do so

[@ismaelalvarado706]

@@-LFATV Maybe you can help me through the process...😬😬 I'm not a mechanic but I like to get my hands dirty and I know it's long term project.

[@andrewweaver2893]

Gotta go back with the blue dude looks sick that way! The bump im running into right now is I’m trying to find yellow harness and ecu for mine. I got a motor with grey plug and harness and ecu sadly. Do you still need the regular ecu if you go the stand-alone route? I’m aiming for the 500+ hp route.

[@jacksonedward7245]

What was the brand name of that letter detail paint? I could get a good look in the vid.

[@Andrew-jh5uv]

The strut tower brace 👍 who makes it ?

[@AlfredoMartinez-tv1tx]

Wrinkle Black

[@rk__9204]

Hey I need help with my Supra wondering if I can talk to about it and my plans about since I’ve been trying build up my Supra out of being my daily. I want to go fast now with it

[@keven6691]

vintage white lettering ?

[@-LFATV]

Its nice but wouldnt go with the theme

[@Abi69ish]

We’re is your store front link?

[@-LFATV]

Its in the description 👍🏼

[@awsom0]

you still have any more shirts dude?

[@-LFATV]

I can make more! I should make some soon

[@elienaysantoro5063]

Do still use that clutch? Is it good? I have a w58 and I need a clutch

[@-LFATV]

This is a r154 not a w58

[@shyvillasenor5778]

Hello bro i live in idaho I have my 1990 supra 7M-GTE And I'm wondering if you know a good mechanic shop down there where I can take my supra to fix it

[@-LFATV]

Down were? In Idaho or Arizona

[@shyvillasenor5778]

@@-LFATV I live in Idaho

[@-LFATV]

@@shyvillasenor5778 ahh no sir i wouldnt know any shops in idaho

[@shyvillasenor5778]

I mean dow there were you live

[@-LFATV]

@@shyvillasenor5778 SR-FAB on Instagram hit him up

[@marvinjenkins9704]

Hey bro send your info I’m building a similar build using ecumasters classic

[@-LFATV]

For wat?? Just curious

[@marvinjenkins9704]

@@-LFATV just wanted to pick your brain about some of the tuning solutions or frustration you ran into

[@-LFATV]

@@marvinjenkins9704 i didnt do any tuning at all, it was all done by a friend who had more knowledge of it

[@marvinjenkins9704]

@@-LFATV ok thanks

[@BuiltByJalal]

Wanna buy my Supra? It’s got 57k miles on it. Clean title no accidents. I also have a 1jzgte that comes with it but is not in the vehicle. Lemme know

[@-LFATV]

I wish i had the money!