Lg 50PS3000 Repair

[@ThePHILALLENSHOW]

Reading some of the comments on here i am a TV repairman of over 40 years. I think your doing a great job troubleshooting and your 16years old that's amazing i was like 13 opened my first Black and white tv that was in the 1960s lol found a broken tube.Anyways i enjoy your tips on your channel.Take Care

[@MrReeceyburger123]

+ThePHILALLENSHOW Hi Allen thanks for the comment I appreciate it buddy :)

[@adrinathegreat3095]

my 4 year old lg 3000 packed up last week, it was about 4 years old, just bought a replacement 50 inch Lcd with built in wifi for half the price I paid for the LG 50 inch and had a 2 year warranty, if it only lasts 2 years I'll be happy. first vcr I bought cost £499 and the first dvd recorder I bought cost £399, both these units lasted 5 or 6 years, a replacement dvd recorder cost £129 with built in hard drive, something the original didn't have. not that it's used anymore, dvd is obsolete now what with big memory sticks, which drop by 50% in cost with every passing year

[@MrReeceyburger123]

Cool, tech nower days just doesn't last these plasma are the best imo :)

[@ИванТютюник-ч5у]

good afternoon I have a problem with the lg50ps-3000 that shows the upper part of the screen then not, what could be the reason?

[@shaun1neo]

I have an LG 50PS3000 plasma TV with the common Red Haze issue. Can tell me if I replace the ZUSU board, this should resolve the issue? I see some ZUSU boards for sale on eBay, but they look different to yours (and assuming mine is the same as yours) would a different model ZUSU board fit/work? They advertise them as 50PS3000 parts.

[@MrReeceyburger123]

Sorry for slow reply yes should fix it.

[@shaun1neo]

+MrReeceyburger123 thanks for the reply. I tried a new ZSUS (white) board that was advertised for LG 50PS3000 but 1 connection was the wrong size, so I had to send it back. You mention the Red Haze issue in this video. I don't suppose you have or could do a detailed Red Haze repair video? 😊 Thanks again, shaun.

[@kenroper68]

hi my lg50ps3000 has good picture but 2 very thin blue lines in centre of screen

[@MrReeceyburger123]

Hi that sounds like the address drivers have failed. This is not fixable the panel Is junk.

[@kenroper68]

Ok thank you

[@tosk3]

Hi, I have the same tv but my problem is kinda like a vertical double image. Do you know how I can fix it ? Would greatly appreciate the help! Thanks!

[@MrReeceyburger123]

+Vylius Antanas Leonavicius Sorry for slow reply, head over to badcaps.net I will help you there.

[@tcstupachidenaddress]

thx very much i have repair with succes my 50pq3000 with your advice ... now i have the 50ps problem .. the tv turn on with remote controll the blue led stay on for 10 15 sec and go orange i don't recive no image mainboard or something else ?

[@tcstupachidenaddress]

+tcstupac hidenaddress and i must say now once in every 2 3 minutes on my 50pq3000 i hear like a plastic crack in the left or right side of the tv i don't know how to explain its like you try to pick up a tv from the ground and the plastic cracks but it dosen't hear so loud its a low sound ... any ideea ?

[@MrReeceyburger123]

+tcstupac hidenaddress Hi mate great news :) Try unplugging the Ymain and Xmain common failure on these sets they could be dragging down the Psu.

[@MrReeceyburger123]

+tcstupac hidenaddress Speakers plugged in properly and what input does it do it on ?

[@tcstupachidenaddress]

+MrReeceyburger123 and for what exactly should i look when unplugging Y and Z board ? because the only thing this tv dose is turn off and on from remote but the screen remains black is not showing the "no signal" text or something ...

[@MrReeceyburger123]

+tcstupac hidenaddress If one of the boards is shorted unplugging one should keep the tv on.

[@rubyx8740]

I have this TV exactly the same and the screen won't come on do you no how I can fix it? X

[@djstifler1985]

Hi any idea what could be wrong when this tv goasting ? Thank you so much

[@garrygemmell5676]

Might be goats in the machine! >;o)

[@mandeepchohan3474]

hi mrreecyburger123 I've got the same TV and recently the top half of the screen blacks out. I've tried replacing the top Y board, to no success. Put the old Y board back in and not the image comes back on after a few minutes, stays and then flickers off again from time to time. any suggestions? It's very frustrating trying to find an answer to this already frustrating problem

[@MrReeceyburger123]

Hello firstly have you ran the test patterns, if not head over to badcaps.net and find out how to do so. Sounds to me like the Ysustain is failed the address buffers on it seem to mess up causing half screen issues. These are rubbish tbh.

[@mandeepchohan3474]

+MrReeceyburger123 I'm trying to find out how to do the test patterns. There are moments where the full image does appear a few minutes from a cold start. Then it's intermittent with some pixilated lines when it does go black again

[@MrReeceyburger123]

Ok start a thread on badcpas.net and I will help you there.

[@antodenn381]

hi i have lg 42 with no sound from hdmi but sound with all of the rest can you help plz

[@MrReeceyburger123]

Post on badcaps.net will help there.

[@kenroper68]

hi added pressure to screen ribbons and line disappeared. run for about 20minutes then went to standby. use remote to turn back on goes from red to blue flashes 8 times then back to red.

[@MrReeceyburger123]

Yeah its a fault with the screen, you might have shorted Va to ground by putting pressure on it. My mate also did that, I did say its not fixable sorry Ken :(

[@kenroper68]

+MrReeceyburger123 that's ok I appreciate your help.

[@MrReeceyburger123]

No worries.

[@samanthaflynn5461]

i v seen your videos on youtube on another channel your information is good but video is very poor you can do with stand for your camara.nice work though

[@MrReeceyburger123]

+Samantha Flynn Thank you :) I have been saying that I need to invest in a stand for about 6 months now just keep putting it a-side what other channel as well I only upload videos to this one ?

[@MrReeceyburger123]

lol

[@massimoalessandroni6144]

en français SVP