[LG Dryers] Troubleshooting & Resolving LG Dryer Display Codes

[@mattr4886]

With our DLGX4001W we have the "CL" code showing along with a red backlit "clean filter". Lint is cleaned from the trap and there doesn't appear to be any buttons that say "child lock", to be able to reset. Just the CL code flashing. Holding down the start button doesn't do anything.

[@LGUSASupport]

The CL error message stands for control lock which is a safety feature that locks the function buttons of the dryer to prevent accidents or a child from controlling the dryer and causing a malfunction. Should this feature be active while the dryer is running, pressing other buttons won't work, and you need to disable the feature in order to continue to use the dryer as normal. In reading through the error codes in the manual, there is no mention of this CL error code for your washer model (DLGX4001) so we'll have to make proper adjustment. Please allow us a moment while we look into this if you don't mind. We'll keep you posted! In the meantime, the following is a link explaining this feature in our washers: ^Chris spr.ly/6051Puv05.

[@evelynscott6259]

@@LGUSASupport We followed your instructions and now there's a DRY light on the control panel. Dryer won't work.

[@deborahgiaquinto9826]

Should my new Front load DLE3600V Dryer had an internal light

[@LGUSASupport]

Hi there Deborah. Welcome to our Social Media page. Based on your recent post, we see that you may need support. Please send us a private message with your name and phone number, and we would be happy to investigate this further. ^Melvin

[@LGUSASupport]

Hello deborah, this specific unit model DLE3600V has only Intelligent Electronic Controls with LED Display, but unfortunately it doesn't have internal lights. ^Melvin

[@LGUSASupport]

If you have any question don't hesitate to reach out to us, and we will be more than happy to assist you. Keep us posted and let us know if you need anything else in the future. For now, I will go ahead and end this session. Thank you for being part of LG Family. Have a great day and be safe.^Melvin

[@LGUSASupport]

Remember that you can always reach back out to us if you need further help. We are here for you. If you don't mind, please take a moment to share your feedback regarding your social media experience by completing this survey on the following link: spr.ly/6008z0XPs. We look forward to hearing from you. Have a great day!

[@larryjordan6573]

Y fryer won't turn on . Lights come on nut won't fire I did just do 2 blanket s and there was water on v front of machine

[@LGUSASupport]

Hello, The best help, care, and resolution are what we deliver. So, we must switch to a platform that supports back-and-forth communication in order to better assist you. By using the handle @LGUSSupport, please send us a private message on social media, and we'll be eager to see what we can do to help. Best. ^Tanisha

[@2wheelpartsguy]

My unit says HU and makes a bad grind noise

[@LGUSASupport]

So we can better assist with your issue please contact LG Customer Support by any of the below options: Live Chat: www.lg.com/us/support/chatbot Email: www.lg.com/us/support/email-appointment Facebook Messenger: facebook.com/LGUSA/ Twitter: @LGUSSupport ^Diane

[@angeminc]

Pause button does no pause machine when I want to pause machine to take something out. Help!!!

[@LGUSASupport]

Hi there! That doesn't sound right! Let's have a closer look! If your pause button isn't working, let's try performing a hard reset first. To do so, unplug the dryer from the power source for about 1 minute. Reconnect it and press the pause button during a cycle to test it again. Please let us know if this helps! In the event it doesn't, we'd be happy to provide additional resolution options. Please provide us with any error codes you may be receiving. Also, be sure to include your dryer model number in your reply! ^Chris

[@angeminc]

@LGUSASupport Did not help. The dryer model is DLEX67000B, ABLEEUS. Any other suggestions????!

[@angeminc]

@LGUSASupport Did not Work. Model od Dryer is-DLEX6700B ABLEEUS

[@LGUSASupport]

Hello there. Thank you for reaching out to us. We understand that your DLEX6700B dryer is still having some issues after the initial troubleshooting. We would be more than happy to assist you in a way that we can. Please send a private message on Facebook or Twitter so we can proceed to next steps. ^Jolly

[@ericyoung3480]

Cool light comes on from the start and doesn't go off. I've checked the filter and connections for blockage.

[@LGUSASupport]

Welcome to our Social Media page. Please contact LG Customer Support by direct message via Twitter ( @LGUSSupport ) or Facebook Messenger ( facebook.com/LGUSA/ ), and we would be happy to assist you further. *Leah

[@paulwerner9182]

POS appliance. This failure is coded in and you can't fix it. LG ignores it and provides bad customer service. They will blame you.

[@LGUSASupport]

Hey there, Paul. We appreciate you bringing this to our attention. We want to ensure that you are getting the proper assistance in regards to your unit. Please send us a private message through our Facebook or Twitter platform using @LGUSSupport with your case/reference, model and serial number. ^Anthony

[@larryjordan6573]

Ble me for what

[@larryjordan6573]

Blame me for what

[@Alexugoma-xv6ff]

Cl

[@LGUSASupport]

Hey there. We appreciate your feedback with regard to the video. It sounds that you may be getting that as an error code on your unit. If that is the case, we'd be more than happy to further investigate the cause of the issue. If you haven't done so, please send us a private message include your contact details, model, and serial number of the unit. ^Anthony www.lg.com/us/support/help-library