✨ LG OVEN - (F11 ERROR ) - EASY FIX - DIY - SAVE $$$ ✨

[@ericcampbell9470]

Good video, helped me out. Thank you!

[@QuickAndEasy5MinuteAppliance]

Thanks Eric😊

[@daviddickason6729]

Many thanks. I have been unable to find anyone in my area who is willing to work on LG ranges, so when my oven would not light, I was beginning to believe I would have to bite the bullet and buy a new range, then my wife found your video. I ordered the part, had it three days later and fixed the oven in less than an hour. You rock!

[@QuickAndEasy5MinuteAppliance]

Awesome job 😊👍

[@bridgetregan3916]

yourselves! We just followed your directions including buying the electrolux part thru Amazon. It went beautifully...took about 45 minutes. Your video instructions saved us $hundreds!!!!! Thank you!

[@QuickAndEasy5MinuteAppliance]

Thanks so much Bridget❤️😊

[@southernroots2229]

All I can say is thank you so much for this video. we ordered the part and my husband just fixed our oven and that did the trick. Thank you so much again!! That sure saved us tons of money.

[@QuickAndEasy5MinuteAppliance]

Awesome, Thanks so much Linda❤️😊👍

[@mattlafever9776]

You the best man! Got my oven fixed up. Ran into a snag at the end when the hinge got stuck in the door and I couldn't get it back on, but you had a fix video for that too and I got it squared away. So glad to not need to replace the oven

[@QuickAndEasy5MinuteAppliance]

Thanks so much Matt😊

[@sharpieconverse]

The modular connector can also be reached by pulling the warming drawer out and getting to it from underneath. For my oven there wasn't enough slack on the other end to pull the connector through the hole so I had to pull the drawer out and access it that way. Excellent video my friend, thank you!!!

[@QuickAndEasy5MinuteAppliance]

Great info. Thank you 😊

[@Heleenajoy1]

Thank you so much!!! I have had the F11 issue for a couple of months. It didn’t happen very often and then it got worse. I ordered the part from Amazon and my husband and I fixed it in about 30 minutes. The video was perfect! I almost bought a new oven. You saved us hundreds of dollars!

[@CarolinePedersen]

Thank you so much for this video! I bought a different part on Amazon that was labeled as working for my LG oven because I couldn't find the Electrolux one.and it clipped right in. It feels good to have fixed it myself (with your help!)

[@QuickAndEasy5MinuteAppliance]

Awesome job Caroline😊😊😊

[@jamesbishop6873]

Thank you sir! You saved me almost 200 dollars. Also, FYI the screws on the heat diffuser plate also have bolt heads. I stripped one of the screws - last one of course - but then just a socket to unbolt it.

[@MichaelinMD75]

I just followed your step by step instructions and the problem was solved flawlessly! Thank you! Thanksgiving was saved!

[@QuickAndEasy5MinuteAppliance]

I love it😊😊😊 Happy Thanksgiving 👍

[@McStullian33]

Thank you so much for making this video! Such a simple fix that saved us so much time and money! I’m also amazed at how clean this oven is… 😂 One word of caution to anyone looking to replicate the steps in this video, my connector to my igniter fell back into the oven once I disconnected it. I had to fish it out with measuring tape which cost me more time than the rest of the job. So my advice is to PULL THE CONNECTOR OUT AS FAR AS YOU CAN AND SECURE IT before unclipping the old igniter. Thank you again for this video! Felt good to do the job myself. 😊

[@QuickAndEasy5MinuteAppliance]

Great info. Thank you😊

[@godboltfamily8996]

IT WORKED!! I fixed the thermostat first, that wasn't it. I broke the first replacement igniter getting clumsy with the screw closest to the pan that was so difficult. But the NEXT igniter arrived today and it works!!! 350* in 8 minutes!! ❤

[@Christian-arby]

After 5 years had the same problem and I made it!!!!! Thank You 🙏

[@QuickAndEasy5MinuteAppliance]

Great job Christian😊

[@rebeccasluss2188]

Thank you so much for your easy-to-follow instructions. I can't fix anything, but I fixed my oven tonight. Thank you thank you thank you!

[@Coffeelvrrr]

Excellent vid - THANK YOU! So much better than many of the bogus videos on here - those with bad lighting, bad sound, and hard-to-follow instructions. Yours was the complete opposite.

[@QuickAndEasy5MinuteAppliance]

Thanks so much Sam😊

[@michaelhulen4576]

AWESOME!!! Thank you for the quick fix, saved me a $100 deductible and time to have a repair person come out. Now on to my tankless water heat.

[@QuickAndEasy5MinuteAppliance]

That’s excellent news😊👍

[@gordlarose4324]

Great info thanks, I did this repair myself in under an hour. I especially appreciate specifics like part numbers and pointing out that there is no polarity on the electrical connection. Keep it up!

[@QuickAndEasy5MinuteAppliance]

Thanks so much Gord👍

[@Mariodbs62]

Thanks to your video and recommendations I was able to save $$ replace my LG oven heating element within 20minutes.

[@QuickAndEasy5MinuteAppliance]

Awesome, Thank you

[@JustBreatheN]

It worked! Thanks for saving me from having to pay for a new oven or even just to have a technician come out and look at it.

[@QuickAndEasy5MinuteAppliance]

Nice job, Thank you

[@beckymockelmankilpatrick5138]

Thank you! I have used this twice now, so helpful!

[@QuickAndEasy5MinuteAppliance]

Thanks so much Becky❤️😊👍

[@TheAustinPiper]

Great instructions. Easy and worked like a charm. Thank you.

[@QuickAndEasy5MinuteAppliance]

Very cool, Thanks Todd👍

[@Violet_Lotus_]

I will fix this myself, but I'm now remembering that I just did it 2 years ago! (for the tenant) and no one has used the oven that much, in that amount of time. I mean light use. Are these igniters cheap or something? I don't recall that the last one was an Electrolux (which tends to be a good brand) so I'll get one this time and hope that it'll carry me through more than 2 years, sheesh!

[@SRR03]

Thank you, this repair worked well for me! Certainly more cost effective than buying a new range...

[@QuickAndEasy5MinuteAppliance]

Very good. Thank you

[@narmen1984]

Thank you thank you thank you thank you!!!! My LG oven (your exact one) has been doing the F11 error since I bought my house THREE YEARS AGO. . It would come and go and I could get past it by cycling bake on and off OR using the warming function to get the heat up. But this always wasted time and was becoming less reliable as a workaround. . I think the ignitor was just so old and weak that it couldn't always heat up FAST enough and it would trip the sensor saying there was a heating error. Like the oven would just give up and say, "Nope it took too long" sort of a fail-safe so it wouldn't fail to ignite gas maybe? . Anyway I got the ignitor for cheaper than a new temp sensor so I replaced it first and the ignitor WAS the issue. Took all of 30 minutes maybe. . Can't thank you enough for your video!!! (Just wish I would've found it sooner!) . Best wishes

[@QuickAndEasy5MinuteAppliance]

Awesome, Thanks so much for the update😊

[@leecast]

THANK YOU!!! Solved my problem and was the same oven. Totally easy to follow!!!

[@QuickAndEasy5MinuteAppliance]

Thanks so much Lee😊

[@MJEdwards409]

Worked perfectly! Thank you!

[@bennis414]

Thank you very much. It worked. We had to endure tough time because of this issue... 👍🏼👍🏼👍🏼

[@QuickAndEasy5MinuteAppliance]

Awesome, thank you

[@cjbkab]

Thank you! This helped me fix my oven.

[@QuickAndEasy5MinuteAppliance]

Thank you👍

[@Neo__-tz5lf]

Thank you! The instructions were spot on. Great video!

[@QuickAndEasy5MinuteAppliance]

Awesome, Thanks for the follow up👍

[@lacerlace]

The only thing I would say is, cushion the igniter while stripping the wires. You must be so careful not to bump the new igniter due to them being so fragile or you'll be replacing them again sooner rather than later.

[@QuickAndEasy5MinuteAppliance]

Good point😊

[@momnson001]

Very very helpful, I followed your steps and fixed our oven, thank you very much.

[@livinthegreatlakesbaylife9188]

From seeing the video and comments below the video, we felt that our F11 code LG oven error was most likely the ignitor. Another sign that we were seeing that others have not commented on yet, was that our oven was igniting more quickly if the stove top burners were also operating. We were able to “limp along” with F11 errors for about 6 months, but they were becoming more frequent. My husband has some experience repairing old clothes washers and dryers, but no experience with oven repairs. But we watched the video and felt it was a job that he could take on. After completing this job, we have the following comments to pass on: --The toughest part of the job for him, was removing the oven door. We have lived in several other houses over the years, and had not had an LG brand oven before. This oven door was different than doors we have removed in the past. So just re-watch that part of the video, take a deep breath, and know that you will figure out how to get the oven door off. --We used the circuit breaker box to de-power the oven, so that we did not have to pull out the oven to unplug it from the wall. --We did not have a screwdriver with a 90 deg. bend attachment as was shown in the video. My husband ended up using a screwdriver or a socket with an extension for all of the various screws. He took his time and ended up being able to get all of the screws loose. -- We bought the ignitor recommended in the video link. However, our ignitor only had one ceramic wire connector in the box, and not two connectors. Unfortunately, we realized this after the return window was over for the part. We ended up being able to purchase another ceramic wire connector at a local store. However, we strongly encourage people to inspect the box for the wire connectors when you first get the part. We saw in some of the other comments that at least 2 others also did not get two ceramic wire connectors in their boxes. --Luckily our ignitor wires were like in the video, they moved freely and we were able to pull the wires and get to the plastic connector to disconnect the LG part. We had plenty of slack to get the new part connected with the ceramic wire connectors and then put everything back behind the firewall as was shown in the video. We have now used our oven with new ignitor about 15 times now. Wow, it ignites so quickly! I think with this model LG oven the ignitor performance slowly gets worse over time, and eventually the F11 errors start. We bought this house 4 years ago and I have always thought that this oven took a long time to heat up compared to our gas oven in our previous home. Now the heat time is about the same as our gas oven in the previous home. Thank you to the creator of this video for helping us fix this problem!

[@QuickAndEasy5MinuteAppliance]

That is excellent news and good advice😊

[@s20dbond]

Great video. I'm going to order the part today and try to fix my oven. Do you have a source for good replacement burner knobs and a screen for that exact oven?

[@QuickAndEasy5MinuteAppliance]

Great Question👍 Click Here to Get Live Expert Help From Me For Just $5.00: kzbin.info/door/GpInAejvpfVVE4FHB_L-Dgjoin

[@sstone6563]

After watching your video, I decided to tackle this repair on my own. Thank you for saving me the money and time from having to have a technician come out. I did run into a couple of issues. Getting to the screws that hold the ignition switch was difficult. I had to buy a 90 degree manual screwdriver. After struggling with the first screw, I decided to try a socket wrench, which went a little easier. It is such a tight space though, very frustrating. My second issue was pulling the ignitor cord out. I could not get it to come up out of the hole like your video shows. It must have been caught on something underneath. So I just spliced it onto the new switch in the oven, versus unplugging the connector and doing it in more light with more room. I was nervous about buying the Electrolux part, as some reviews on Amazon said it wasn't compatible with LG. So I did spend $10.00 more to get the LG compatible part. Other than that, it went great, and we can cook again! Thank you!!

[@QuickAndEasy5MinuteAppliance]

Nice job, Thanks for the great update

[@andyharris7401]

Great video, thank you!

[@QuickAndEasy5MinuteAppliance]

Thanks Andy😊

[@aaronborden9143]

Thanks!!

[@lllogman]

This was most helpful. Thank You.

[@QuickAndEasy5MinuteAppliance]

You’re welcome😊

[@josephmoy3158]

Hey Scott ... is there a way in which I can determine if my F11 issue is due to the igniter or oven sensor? And do you have a video on replacing the oven sensor? Thank you for this video by the way!

[@erikkornfeld785]

I am not a pro buy I figured it was the ignitor for mine because I smelled gas and felt no heat from the oven. If the ignitor turns on and lights the gas but the sensor just doesn't work than I figure it would act like an oven for 5 minutes until the control panel shuts it down for safety. If anyone sees any issues with my logic please feel free to comment. Also, it could be the control panel too... But I have no idea how to determine that one except replacing everything else.

[@kristophercaesar371]

Thank you Scott, I am not sure if it is my igniter as when I try and heat my oven I get a slight temp rise and after 10……to 15 try’s it works. Could it be that the igniter is heating but not hot enough to trigger the the gas safety or could it be something with the safety by itself?

[@QuickAndEasy5MinuteAppliance]

Definitely the igniter👍

[@amalal-hashimi2473]

Thanks so much..

[@QuickAndEasy5MinuteAppliance]

Thank’s So Much, I’m so glad it worked and saved you time and money 😊 I hope you’ll click here to support us by joining our Channel: kzbin.info/door/GpInAejvpfVVE4FHB_L-Dgjoin You’ll get Live Appliance help when ever you need it. It’s just $5.00

[@dmt66]

Interested in difference between sensor and igniter issues also! I noticed the error, smelled gas, and then saw moments later that the oven eventually kicked on. The gas smell was obviously alarming, should I replace both?

[@QuickAndEasy5MinuteAppliance]

Good question , just need a new igniter😊

[@hollerusc]

What is the part number for the sensor??

[@lostriverjones1586]

Thanks, worked like a charm!

[@QuickAndEasy5MinuteAppliance]

You’re welcome😊

[@carsten4594]

Good video. I've advised others to try replacing the ignitor but in every case was met with resistance because of what the code implies. The local appliance repair usually suggest replacing the computer. Go figure.

[@QuickAndEasy5MinuteAppliance]

A new igniter makes the most sense to try first👍

[@JamesCA]

thank you! you saved me a ton of money!

[@QuickAndEasy5MinuteAppliance]

Thanks James😊

[@jenc.1433]

We have already replaced our igniter a couple years back, but f-11 code is showing up again and oven isn’t heating all the way most times. We bought a sensor thinking it might be that….do you think we’re on the right track? Thank you!! Appreciate what you do👍😁

[@QuickAndEasy5MinuteAppliance]

Thanks Jen, I would replace the igniter again.

[@jenc.1433]

@@QuickAndEasy5MinuteAppliance ugh ok, I'll order the part. Doesnt it seem weird that these new ovens of our time have so many issues? It's started having problems at two years old, and now again at 5. Things are not made to last I guess. Thank you:)

[@QuickAndEasy5MinuteAppliance]

So true👍

[@karao7831]

So this happened to me a few years back and I replaced the ignitor. But now it’s doing it again. Why would this keep happening ?

[@QuickAndEasy5MinuteAppliance]

Good question. Do you do a lot of baking? Might have just burned out again.

[@robertmaimone8733]

Thanks for sharing! Did you replace the ignitor with the oven pluged in, just checking, and what size is that ignitor screw,5/16, thanks for sharing, good job.

[@QuickAndEasy5MinuteAppliance]

Better to unplug it👍

[@libbiemorin2555]

Thank you Scott! I have a 10 year old LG gas stove but no where to get parts but shipped across country from Nova Scotia: you mentioned amazon.etc for purchasing parts (this case the Electrolux part you put in). Can we order these parts from Amazon to Canada? yes.. newbie to repair talking. Thanks again. Great instructions.

[@williamwatson4180]

Hey, so we got the F11 error and followed the video. Are purchasing the igniter but I noticed comments mentioning the gas but ours isn’t doing anything with the gas either. The igniter is definitely busted because it’s not getting red but a little worried more is going on. Any ideas?

[@QuickAndEasy5MinuteAppliance]

Thanks William, The new igniter will cure the problem. The oven will not let gas come in until the glow igniter is glowing white hot.

[@executorvs]

I have this oven (lg branding LRG3095ST) and am struggling to figure out an intermittent f11 no heat error that sometimes occurs while the oven is running OR sometimes occurs if you try to restart the oven if it is hot from a previous use OR very infrequently will fault at cold start. Both igniters test properly for resistance and draw, the gas safety valve test properly, temperature sensor tests properly for the ambient temp at time of test, the onboard diagnostic function appears to tests correctly, and the control board has no visible damage under 10X magnification. I'm not a service tech, but am fairly handy, however I'm at a loss on where to go from here. is there any advice on next steps?

[@QuickAndEasy5MinuteAppliance]

I would install 2 new igniters. Nice testing👍

[@graceomalleygrimm9776]

I love that you are doing this is dress pants and shoes. I wish I could that, without ruing them. Lol

[@ytfabulous23]

Hello ! Thank you for that ! The igniter costs now 40$, is there cheaper ou the quality of this one is particulary good ? Thanks !

[@joshymcdaniel9233]

If $40 part fixes your oven not only did u save $700-1000 buying a new one you saved easily $300 in labor charges’ Buy the $40 part lol’ When it comes to electrical and water aka sink faucets connecters etc NEVER CHEAP OUT! Water easily will cause thousands in damages’ Cheap electrical items easily burn down your house’ Just my 2 cents 🙃

[@Blessedbloodlinekennels]

Does it come with the ceramic wire nuts ?

[@QuickAndEasy5MinuteAppliance]

It does👍

[@karao7831]

Me again , so I’m going to do this again and for some reason the connecting cord deep inside the oven is sticks dna won’t pull up enough for me to remove the connector . I wiggled it a bunch and doesn’t feel like it’s stuck on anything . My husband wanted to take the whole pot Tom of the stove apart

[@QuickAndEasy5MinuteAppliance]

Can you pull the stove away from the wall and unplug it and then remove the back panel and then you’ll be able to get to that wire in the back a lot easier.

[@sporcello7360]

What do you do if the ignition doesn’t properly light after changing?

[@QuickAndEasy5MinuteAppliance]

What do you notice when it’s supposed to ignite?

[@shottyshot]

U the man! Thanks brother!!

[@QuickAndEasy5MinuteAppliance]

Glad to help😊👍

[@elizaaajane]

If I replaced the ignitor about two years ago, should I presume it's the sensor that's gone bad?

[@QuickAndEasy5MinuteAppliance]

You’re right. I’d say oven temp sensor 👍

[@elizaaajane]

@@QuickAndEasy5MinuteAppliance thank you so very much!

[@123MSNETTA]

What was that on the drill to get close to igniter...to put the screws in

[@graceomalleygrimm9776]

123MSNETTA, it is an extension for the drill, that gives it a curve. They come in kind of handy.

[@barbarabonanno1879]

I need to know...if I don't fix the igniter is it okay to use the oven? My oven will beep and show the F-11 on the display. Then I hit OFF. Then I ask it to bake again and set the temp. After this it works fine. Is that okay?

[@QuickAndEasy5MinuteAppliance]

Yep, you found a way to make it work 😊😊

[@scottcraig177]

My LG gas range just stopped working. BOTH the oven and the top burners - at the same time. There is power to the range because the clock, etc. work. The igniter in the oven glows when the range is turned on, so there is power to the oven. But the top burners do not make the "clicking" sound when turned on (but gas DOES come out). So I see solutions online for EITHER the oven or the top burners not working, but what could be the problem if BOTH are not working? Thank you!

[@QuickAndEasy5MinuteAppliance]

I bet the oven just needs a new bake igniter. The burners not sparking is probably due to a faulty spark module.

[@hollerusc]

Hi! Our oven broiler works but we get the F11 code when we turn on the oven or self clean option. LG Model LRG3095ST/00...does it sound like the igniter or the sensor?

[@QuickAndEasy5MinuteAppliance]

I’d say it’s time for a new bake igniter👍

[@hollerusc]

@@QuickAndEasy5MinuteAppliance awesome, thank you! Do the aftermarket parts seem to work fine or do you only recommend those manufactured by LG/ Electrolux?

[@QuickAndEasy5MinuteAppliance]

I would buy the 20.00 Electrolux igniter from Amazon

[@gingereaves4097]

I replaced my igniter 3 years ago after getting F11 code; recently got it again and replaced it and it worked 2 days and now I get the F11 again. Any ideas?

[@QuickAndEasy5MinuteAppliance]

Must need a new temperature sensor 👍

[@paulsenjhealey]

Awesome thanks! Super helpful!!!

[@QuickAndEasy5MinuteAppliance]

Glad it helped!😊👍

[@madonnahagedorn5649]

I have the same oven and the F-11 signal is going on again. My husband pulls the oven out and unplugs it for 5 minutes, plugs it back in and it will somehow reset. It's worked. That's what the manual tells you to do.

[@QuickAndEasy5MinuteAppliance]

Thanks for sharing, I think it just needs a new temperature sensor.

[@shakos4105]

Do I need a drill to do this or can I just use a screwdriver?

[@QuickAndEasy5MinuteAppliance]

A screw driver is fine

[@OlderPilgrim]

Hi, I have an "F5" error code, seems related to ignition - my wife told me abvout it, I have not seen it. what is an F5 for a gas range?" LRG4115ST/00, thanks

[@GFDthatsMe]

New oem igniter and temperature sensor. Still f11. Any ideas? Broil and top stove work.

[@QuickAndEasy5MinuteAppliance]

You’re doing really good. You’ve done everything correctly but sometimes there is a third thing that Hass to be replaced and that’s called the relay board. It’s pretty easy to do and you can find it by checking your model number in a Google search along with the word relay board.

[@GFDthatsMe]

I found the culprit. We had mice a few years back and one of the wires was completely cut and both in bad shape of the female plug. Surprised igniter worked at all. It was a female to female that ran from the igniter to the back of the oven. I depinned the plugs and soldered new 18gauge wire to it and works perfect

[@heliumburrito]

I have the same exact oven and it said f11 heating error when preheating oven i clicked clear/off button and clicked bake button back to 350 nothing happened so far

[@graceomalleygrimm9776]

Hey Scott, do you know would make the entire oven range to just stop working? We, of course checked the fuses, and the outlet, but it acts as though it is not getting any power. Could you please tell me where to start my search for issues? We were in the middle of making pizza and the whole thing just shut off, as if it were a blown fuse. This was not the issue.

[@QuickAndEasy5MinuteAppliance]

Thanks Grace, Is it connected to the large 220 volt power cable? Could be one of the two breakers dedicated to the range tripped. Do you see any lights or hear any sound when you start it up?

[@graceomalleygrimm9776]

@@QuickAndEasy5MinuteAppliance it is on fuses, and my husband did check those first. Yes, he does have it on a 220v outlet. He even redid that in case that went bad, but it didn't help. And nothing happens when we plug it in. The display is blank, and I don't remember anything when we plugged it in. I am really hoping that you aren't going to tell me it is the control for the display. I saw the price on those, $160!😱

[@bedshapd]

I have the f11 error code but my igniter works and so do all burners… the temp will not go above 380F and it takes a long time to get there

[@QuickAndEasy5MinuteAppliance]

Yep, the igniter is just getting weak. A new igniter will fix it👍😊

[@bedshapd]

@@QuickAndEasy5MinuteAppliance thanks for the response.... i thought the igniter was only at task during initial oven start....does the igniter stay on during the entire time and is responsible for heating the oven or is it the burners that do that?..... when i start the oven the i see a bright orange light under the panel and then the ignition kicks off a minute later...i was under the impression that was the "igniter" and it turns off after the burners start...thanks for the help

[@bedshapd]

@@QuickAndEasy5MinuteAppliance the igniter was the culprit. I changed the fan motor too and now convection works again after many years….gonna send the new range back to depot and get my 2K back….thanks for the video..🙏👊🫵

[@chrismcneil859]

Help! I accidentally disposed of the old igniter before cutting off the modular connector. Anybody know if it’s ok to just connect using ceramic wire nuts and bypass the connector?

[@QuickAndEasy5MinuteAppliance]

Hi Chris, The wire nuts work great😊 Either igniter wire to either oven wire👍

[@chrismcneil859]

@@QuickAndEasy5MinuteAppliance Awesome, just hooked it up and it works great. Thanks so much!😃

[@dorislovern9133]

Is this part compatible with LG MEE63084901?

[@QuickAndEasy5MinuteAppliance]

Hi Doris, That should work fine

[@dorislovern9133]

@@QuickAndEasy5MinuteAppliance thank you!

[@gregkuhlman2705]

Cant see the complete part number, plez help!

[@QuickAndEasy5MinuteAppliance]

There’s a link in the description for the igniter.

[@sergiomagana2062]

I replaced the sensor and igniter but still getting the error code

[@QuickAndEasy5MinuteAppliance]

Gotcha, Replacing the relay board will fix it.

[@richardlawson6787]

seems like there is always one screw that strips out....must be a fundamental law of nature

[@odannyboy000]

This video was perfect for my LG mbm61893513

[@QuickAndEasy5MinuteAppliance]

Thanks so much😊

[@ChrisCoulson777]

Thanks!

[@QuickAndEasy5MinuteAppliance]

You’re welcome 👍😊