LG TV Blinking Codes: How to Solve Red Light Issue?

LG TV blinking codes are a bit complicated to understand!
Yet with a little patience and the right guide, you can decode these blinking codes. Because these are basically the secret indications of the actual problem.
In this video, I tried to break down the blinking codes of your LG TV and how you can solve if your LG TV's standby light is flashing red.

[@jmservis2370]

Thank you for sharing, the knowledge is very useful

[@home_spoiler]

My pleasure

[@Vivoxd-b6g]

Whats if one blink only ?

[@belindavanommering7842]

I have a Panasonic tv which stopped on the Utube channel and I can’t stop the red flashing light I cannot get it back to a channel or use dvd and I have to use the back to try and resume my tv programs HELP

[@home_spoiler]

Try this basic thing first: 1) Unplug your TV from the power outlet. 2) Press and hold the physical power button on the TV itself for 30 seconds to drain residual power. 3) Leave the TV unplugged for at least 5 minutes. 4) After that, Plug the TV back in and power it on. Please, let me know what happens....

[@belindavanommering7842]

@@home_spoiler I cannot get it back to tv or the AV. I hear sound and the screen just flashes and goes back to the blank screen. I just brought the 6 plug board but it made no difference. I’m still stuck and I did what you told me but to no avail

[@MTAURUSSMYTH]

Mine blinks red on the LG Sound Bar non stop when the TV is on.

[@home_spoiler]

The blinking red light on your LG soundbar's wireless subwoofer typically indicates a connection issue or a problem with the subwoofer itself. First of all, try manual pairing. To do this, turn off the soundbar, hold the pairing button on the back of the subwoofer until it starts flashing green, then turn the soundbar back on. If pairing is successful, the light on the back of the subwoofer will turn solid green. If this doesn't work, check the 'Auto Power On' feature and make sure it's turned on. If it still doesn't work, factory reset your soundbar.

[@kellihogston1646]

What is 2 blinks thanks

[@home_spoiler]

Two blinks mainly caused by faulty LED backlight or T-con Board. If your TV blinks red twice, then it's probebly either due to faulty backlight strip or T-con board

[@fammazlan781]

3 blinks brother?

[@home_spoiler]

The most likely cause is the power supply, but it could also be the main board.

[@resourcesff3733]

Tie bhi pehn lete coat ke sath