LG TV Magic Remote Cursor Not Working / Pointer Not Working? Do This...

[@techtests]

See the full guide: www.lapseoftheshutter.com/lg-magic-remote-cursor-not-working/

[@brettgrove1224]

Lost the remote that came with my LG OLED and bought an OEM replacement one for it. COULD NOT get the pointer to work. Resetting the Magic remote fixed it! Thank you so much !!!

[@heisobi4555]

Thank you so much sir re-registering my remote worked for me ❤. Your still saving lives in 2023❤❤❤

[@UltimateKaycee]

Hey man. I just want to specially thank you for this video. Even before the end, I solved a magic remote issue that has been given me serious concerns with my new TV. The pointer wasn't showing and as soon as I followed one of your instructions, BAAM! The tiny pointer showed up. Thank you so much. This was so helpful.

[@SaveThyPlanet]

Re-registrating remote worked for me. ❤ Thank you so much!!

[@WeAreLegion-]

How though? 😂

[@twona.]

thank you so much, was literally using the cursor then boom it stopped working. was about to lose my mind😂

[@bledardmexhiti8705]

The software update worked for me, thank you. Wish I saw this video before heading to buy new batteries for nothing 😂

[@DanielNuske]

for me the poiner was not appearing when shaking the remote, but the cursor and other buttons worked fine. Your solution of de-registering and registering the remote back again worked out for me . Thanks !

[@bloodstriker6382]

Mine's not registering back What's the solution?

[@WpnHex]

holding the home & power button saved me! thank you king!!!

[@michaellawrence1322]

Thanks. Worked. Wand not working, so moved wheel up and down then pressed the wheel down and wand appeared. Saved me buying a new one. Cheers.

[@mistert4772]

If you've tried everything to get your pointer back, and you're ready to throw the remote through the window, do the following: Go to SETTINGS (gear shaped button on the remote). Select GENERAL. Select ACCESSIBILITY. Turn AUDIO GUIDANCE Off. You're welcome.

[@WeAreLegion-]

Didn't work

[@shainester]

That worked perfectly for me. Thank you!! In-laws were house sitting, we came back to hear the audio guidance on, but the pointer / mouse wouldn’t show on the tv. As soon as I turned the audio guidance off, the pointer reappeared. Just like magic. 🙂

[@abeck78]

Holding down the power button for 10 seconds worked for me!

[@SC-101]

Thank you! I got my Tv only 2 weeks and this happened! A hard reset - tv helped it.

[@dannypr6708]

Thanks man holding the two buttons was the trick

[@techtests]

Good to hear

[@icephoenix3565]

Same with me

[@alixander_22]

Reseting the remote worked for me, thanks a bunch.

[@God_Guns_Texas]

Quick re-register worked. Seems like that’s the most common issue. Thank you.

[@Wolly333]

Thanks. The re-registering fixed my remote.

[@mjalondon413]

First suggestion to scroll worked immediately !! Thanks so much !

[@anshumankumar9661]

Thank you so very much, resetting the remote using Home + Back button helped fix the pointer problem.

[@tink22-ep5lz]

Thanks so much for this! Mine worked after the soft reset on the lg tv. Your awesome!

[@poopscoop2000]

Thank you! Reregistering the remote sorted it out for me. Huge thanks.

[@techtests]

Great!

[@lakota398]

I discovered by turning off quick start+ my pointer returned after trying so many other things. I think it kept saving the same settings by not turning completely off and staying in standby mode. It seemed to reset the tv, or perhaps just dumb luck. 😂 Maybe it will work for someone else!!

[@arunrawal3029]

Re-registering the remote solved the pointer issue. Thanks for information. 😊

[@techtests]

Great 👍

[@ladylov3lace435]

Same 😃👍

[@sulavshakya4157]

I just removed the batteries and put those back, it worked. Thanks

[@NaveenSaga]

Thank buddy. Option 4 worked

[@Cutie-pie-chandu]

Home and back button worked perfectly 👌 Thanks a lot dude❤

[@olatunjiolaoluwa]

Thank you.. i got it resolved

[@_.Egor._]

Thanks! Re-registering helped me.

[@Personal-be3vc]

Thanks man the remote reset work for me. 😅

[@ronny1012]

Your Step 1.2.2. Worked. Thanks

[@techtests]

Thanks

[@leighmonty13]

Tried new batteries didn't work but re registering remote worked thanks

[@thegatorjules]

Thank you! Re-registering fixed it

[@Dboy-96]

Respect mate got there at step 4

[@alvarogoubaud6729]

Registering the controller worked for only 2 mins, then I stopped using the controller for 30 seconds and the pointer didn't worked again.. I've also changed the batteries to make sure..

[@igorssinukovs9591]

Thank you reset helped i was using the tv without the pointer and my second tv with old magic remote was working fine,until now i use to hate the new magic controller but now it works

[@ChoroTesla]

factoe resetting of remote is the best to me thanks so much brother.

[@techtests]

Thanks

[@equalitypeace1695]

How do you make the pointer align to the centre of the tv ?

[@fairyvictory]

Thank you! Deregistering it worked for me 👍🏼

[@emilkalinov]

1000 благодарности ! рестарт на ТВ и се оправи !

[@pallavivig1437]

Thanku ,re registering remote worked. 🙏🏻 N i was charging the remote batteries from 2 weeks😂

[@JF098]

Wish re-registering it worked for me like it did for everyone else. De-registered it. The remote still worked but I kept seeing "Registration failed" and the sensor + wheel scroll still do not work. Now home + back don't even work. Had to hard factory reset and now my app can't even connect to my TV anymore, but the remote works fully.

[@mohammedsadath7399]

Resetting the TV worked successfully

[@techtests]

Thanks

[@zainbsr5544]

Thank you very much i doing reset control and it work❤

[@rufascar9512]

The “OK” button on my magic remote stoped working., but the pointer was still working. The only thing that was not working was the ok button so I could not select anything. So I de-registered my remote by holding the home and back buttons until the power button flashed three times. However it flashed more than three time and now the pointer no long appears. End result OK butting and pointer not working and can’t even complete de-register the magic remote.

[@mikeopcgate7]

Hello!!Just came the remote.i've re registered it with the tv and.the only buttons that don't work with my CX are Disney,Rakutten buttons .. should i do anything else or there's no way to function those 2 buttons?

[@greekgod2332]

You're a life saver!

[@amjadoh]

Thank you, reset magic remote worked with me

[@techtests]

Glad it helped

[@evelyn23462]

This totally worked…… Thanks 🎉

[@techtests]

You're welcome!

[@Macintosch1000]

THANKS BROO!!! i was come crazy with remote conrtol.. and i was must reset tv.. later i sworking..

[@techtests]

No problem 👍

[@iamblind253]

Thanks man

[@pietergroenewald9664]

Your reset instructions did the trick... Thank you so much...

[@techtests]

Thanks

[@Spanish_Bhaai]

Thankyou this really help me

[@user-eg6pw9cy5j]

Thank you brother (tuch maza bhau) ❤

[@foneyboy01]

Thank you sir the two button reset done the trick

[@marie-christineribe7277]

Thank you. It is working now👍

[@techtests]

Thanks

[@ineshianewton7740]

Thank you

[@pepepotamo5772]

This remote would work for the TV model UM7600PLB? Gracias

[@user-kq3ht4nd9y]

Hey my main select button is broken. Can I use any other button for alternative for ok?? Is there any such option. Alternative button for select/ok button?

[@techtests]

I can't find any other button, unfortunately.

[@alltheboost5363]

the tv lg c2 says the remote is not supported by this tv

[@laurissacail1231]

Thank you so much!!! 🎉

[@techtests]

You're welcome

[@ArnarYngvason]

nr.4 worked

[@DEVENDERKUMAR-cn8yt]

Thanks sir

[@techtests]

You're welcome

[@zapify6999]

love you so mucy

[@jerimcmakin6154]

Mine is not working only in KZbin

[@Nikhilsingh-it6hj]

Thankyou 👍🏻

[@techtests]

You're welcome

[@emilkalinov]

Когато е включена функцията - гласово показване на командите - тя е за слепи , и тогава курсорът автоматично изчезва . след малко време .

[@Mine_Crab]

I think i slapped my remote to hard and now it doesnt work

[@BLIND82]

How can you update your TV if the remote ain't working and usb ain't an option 🤦🤦 these are not tips it's common bloody sense.

[@dp1983]

This remote eats batteries within days after that pointer stops working

[@techtests]

The pointer uses Bluetooth while the buttons mostly use Infrared. Bluetooth needs more power so you would expect that to fail first when the batteries are running low.

[@joeking433]

I WISH my pointer didn't work! It sucks!

[@davidfouche2392]

Reregistering the remote worked thanks og stackadolla