LG washing machine error TE

Error code fix for the LG washing machines

[@valery4872]

Hi, informative video, thanks. The tE error code may be just due to a broken conductor to the two upper terrmistors, as it was in my case. So, it is good to see if there is weak cable at the connector - -due to large RPMs of the machine cables get broken. This may spare few bucks.

[@gbandyno]

yes...this video shows you how to pinpoint the fault.then you have to decide what to do

[@user-sw8os2bu2e]

Большое спасибо. Посмотрел и разобрался сам . )

[@HaroldJackson]

Great video! Thank you.

[@tanhiennguyen1284]

Tan Nguyen Hi thanks your video very good

[@ofzzzzzzz]

gracias! muy bien tu vídeo!!!

[@nicaher]

Osbaldo me podría hacer un fa me podrías traducir o indicar la solución que pena

[@gbandyno]

20,000 views 53likes and 3 dislikes so far should say it all: this help a lot of people and I am happy with it

[@priyopw]

Thanks 👍

[@OBE4KA]

I have got the same washing machine :(, and it does not heat water. The thermistor shows 60kOhm, and the thermostat shows about 32 Ohm. While machine was operating i tried to measure AC bias between thermostat therminals, and it appered that its 0. Where should i search the break in circuit. I've heared about relay, but i didn't find it :(.

[@bettyvegas3265]

I also bought this part and I have an LG Tromm. I opened the top and found what I think is the right part. It still gives me the tE error code. Is it in the front of the washer? Or up on top?? Thank you!

[@gbandyno]

Betty Vegas as far as I aware this model had 2 sensors on the top and one at the back.use multimeter to check resistance on all of them

[@gbandyno]

To fix this problem you have to buy new heating element what has build in thermostat.many thx

[@paulkaruri5368]

I have error tE even after replacing the thermistor.The heater element is ok.What should i do?

[@jeffersondiego8]

Hello! Do you have the thermister thermostat part number?

[@gbandyno]

I have the top one spare somewhere around..

[@andrewfava693]

I eliminated the tumble dry thermistor and giving me a te error what can I do please to fix problem.

[@gbandyno]

You can not eliminate it. The system has to read certain resistance in the circuit. If the resistance is none, too high or too low the TE error comes up to prevent any kind of damage to the other components

[@MajiAnsiMaziMaiz]

What's the IE code

[@gbandyno]

majeed mudigere Majeed IE error is no water coming into the washing machine.(I think)

[@valentkusuma8514]

How HE ERROR PROBLEM