Lian Li Galahad 2 LCD Infinity wiring guide and setup walkthrough

[@TheProvokedPrawn]

Note this is available to buy from the 18th October 2023. Specs of this build: (note this includes affiliate links that earn me a commission at no extra cost to you) Motherboard - Asus ROG STRIX Z790-A GAMING WIFI D4 motherboard (kzbin.info/www/bejne/aHq0dKGhr7CnptU) CPU - Intel Core i9-13900K (amzn.to/3RWvGrQ) Case - Lian Li Dynamic Evo XL - kzbin.info/www/bejne/iJu4qIWva6uCqZo Fans - Lian Li SL-INF 140 kzbin.info/www/bejne/bHm4oYtsq5akiqc And Lian Li SL-INF fans (kzbin.info/www/bejne/jZCkoZyElLyom8k) (120mm) CPU cooler - Lian Li Galahad 2 LCD kzbin.info/www/bejne/g6nQkGVvorylb7s RAM - Kingston FURY Beast RGB SE 64GB (amzn.to/3NPEuvD) NVMEs - Crucial T700 (Two 2TB kzbin.info/www/bejne/eGGbdKluhcdspKs) Crucial P5 Plus 2 TB(kzbin.info/www/bejne/j5uyqnZ4bLukoNk) Crucial P3 Plus 2TB (kzbin.info/www/bejne/j4G2n6GBfL6fa5Y) PSU - Corsair HX1500i PSU (kzbin.info/www/bejne/oaKVc2V-gLOdiLs) GPU - Asus ROG Strix RTX 4090 OC White Edition (amzn.to/3tr1nzc) RGB - Lian Li Strimer Plus V2 (kzbin.info/www/bejne/hYXRq6ttasiqadU) RGB GPU - 600Watt Strimer (kzbin.info/www/bejne/iZuyqqJofZtsrNk)

[@Notpropianist]

Can you help me by reviewing my parts for a future build By the way I’m subbed

[@hellcatpekes8974]

For those of you watching this with LGA 1700 sockets it's the NON dotted screws you have to use. Just FYI!

[@RichardHollowayGaming]

Thats just what I was about to say

[@_CaptainOres_]

Yeah same here, saw conflicting info to this video when reading online. Was just looking for this comment to double check lol!

[@TimboSlice083]

Dude, thanks for this video. And your others. Showing all these different scenarios, etc. I just ordered the long screws you linked. I have a similar build I’m attempting to do. Still waiting on more parts.

[@a-droid6806]

1:12 Are the fans actually set up as an exhaust? Just wanna make sure I heard it right because they look like intake setup to me…

[@710shawn3]

I just spent 45 minutes tearing my room apart looking for that "missing cable". The relief when you said its not needed lmao

[@TheProvokedPrawn]

👍🏼

[@MrGrim-oo5bq]

First I'd like to say how much your vids have helped me in my Lian Li EVO XL build. Everything was coming together until I got the Lian LI LCD cooler installed, I have had a not so user friendly experience with this and L-Connect3 working the way it is supposed to. After two very frustrating weeks of trying everything that I read from other people having the same problem and watching a zillion KZbin vids I finally got everything working the way it was supposed to, ( the LCD Block was the main culprit, not working with the software). Anyhow, I finally got almost everything working with the exception of one thing that I hope that you might be able to help me with. My setup is the LL Lcd cooler in a push pull configuration attached to top, three 120mm fans attached to side, three 140mm fans attached to bottom and two 120mm fans attached to back. I have the two series of fans from cooler attached to the controller that came with aio. I also have the three side fans and the 3 bottom fans connected to the same controller. This fills up the controller, so I used the other controller that came with the 3 pack to hook up the two back fans to it. My problem is when I go into L-Connect3 to set up the fans in a rgb lighting configuration all of the rgb lighting effect that I chose works on all of the fans except the two back fans that are hooked up to the controller that came with the 3 pack. I'm sure it is some sort of connection that I haven't done right, but at this point I'm so frustrated with this cooler and software I can't even think about what to connect or disconnect! If you have any suggestions or if you need more info from me about set up I would GREATLY appreciate it! I really enjoy your vids, it's the voice monotone and the Shrimp! We love our SHRUMMPS here in the Lowcountry!! Thanks again. Ciao

[@TheProvokedPrawn]

Assuming both controllers are connected via USB, can you see them separately in l connect? You should be able to cycle through them left to right. The lighting sync options in l connect should make all the fans automatically change even if they're on different controllers. The other thing to check is in the settings of l connect, look for a firmware update for the controller.

[@MrGrim-oo5bq]

@@TheProvokedPrawn Thanks for a response, yes they are both connected via USB and I can see them separately. It lets me set a color combo, (I have orange and the light blue) for each fan set on runway, but the two fans in back stay dark blue and red on the strip of mirrors effect and the lighting around the two fans. I have the latest firmware installed, 0.9 I think it is. The 2 fans in back have the wide connection inserted in the controller that came with the 3 pack and the USB connection is hooked up, also the 2 sata connections coming off the controller are hooked up. Is there anything else that should be connected to or coming off of that controller? The only other thing is, since I had so many USB 2.0 connections to be made, (have strimmer too), I have the NZXT USB adapter for all of the USB connections from the controllers. Thanks again!

[@asunainori6475]

I was told when doing PC research that the way you have the AIO is actually better then on top but not by a lot but still better that most people just put it on top for aesthetic looks.

[@TheProvokedPrawn]

kzbin.info/www/bejne/p4LGqox-fNl0qNU

[@MrVoayer]

A life saver video !!! Well worth repeated viewing ! Great job !!! Just one more thing: please, show us how to manage two fan controllers through LianLi Connetct-3 software ! If it is possible, at all?

[@Blackmagic662]

I would like to see this too. Curious.

[@shuurajou]

Superb guide. Can’t fault it at all. Really appreciate the detail you went to. Covered all the bases.

[@TheProvokedPrawn]

Glad it was helpful! Thanks for watching

[@TPA_JW]

At 2:14 you mention the cable is plugged into the AIO pump on the motherboard. If you motherboard does not have that connector, what do I use instead? I have a Gigabyte A520M-ds4h v1 and it only has 4 pin CPU fan and 4 pin Sys fan connectors. Not sure which one to use with which plug.

[@TheProvokedPrawn]

CPU fan

[@TPA_JW]

Thank you. And then the rest of the fan controls are plugged in via the hub, correct? I am connecting (2) additional 3 fan infinity segments and they will also plug into the hub as well correct? I don’t have any interest in controlling fans from the motherboard, only through the L connect 3 software.

[@caput84]

Thanks a million for that video mate, spot on! Just received the exact same product in white but didn’t get far with installing it. One thing that might turn out differently with an AM5 system is the standoff screws. My manual says LGA 1700 requires the screws without the dots. I’ll know for sure tomorrow 😎😅

[@dexxxter6007]

Hi, "after the screws with the dots" you use a LGA1700 then it should be exactly the other screws according to the instructions I am a bit confused

[@TheProvokedPrawn]

I'm a human that makes mistakes apparently

[@ABS_guy]

I'm confused at the step 4:48. I don't have the individual fan controller you have the tutorial with. My separate triple fan has the connection as shown before but how do you connect the AIO separate two pins to the standard controller that has four 7-pin inputs and two rgb connections?? I connected the RGB but the fan power has the ground on the opposite end of the power connections as the AIO Pump power does so I can't connect it to the normal CPU fan slots.

[@fabricioruediger]

The video help me build my setup.... tks...very detail!!! On thing that I cant make work, is that setup of 360 aio lcd galaga 2 with new model device and setup with 3 x triple packs inf 120mm device... For some reason the wire ship it tougher with lcd aio wont conect half of the 2nd fan and dont light up the 3rd. in the radiator. Do you have any ideas? suggestion? this video has the cable at 0:25sec,

[@haies09]

Can you connect 13 fans to the AIO controller? Running side, bottom, push/pull and a single exhaust on the back. Can’t figure out how to connect the back fan, and would rather to have one controller instead of two 😊

[@BOT-xt8pu]

Best video ever for anyone who plans to build a computer😀 I am not a newbie but these tutorial videos are always welcome because new stuff come along all the time Thank you for the effort you put into this

[@TheProvokedPrawn]

Glad it helped!

[@putindolbaeb9646]

can i replace these two wires from the water cooling outlet fans with one wire and connect it to a normal inf fan hub?

[@brehidk]

how can I connect the single pack sl inf fans to the controller the aio comes with since the rgb cable for single pack is for motherboard and I want to connect to the aio fan controller. (Im trying to connect three more groups of fans)

[@rowentw]

Can you show the process on how to use these fans with the Galahad II infinity 360 LCD and the Strimer plus v2 etc. As this video is still confusing

[@keithglanz7534]

Absolutely the best most detailed depiction of the install steps and potential headaches for the Lian Li Galahad 2 LCD AIO. This AIO (and the rest of your build) matches very closely what will be my first PC build. So it's VERY helpful. Thanks! I have a question about the cabling issue you mentioned when deciding to use 6 fans in a push/pull AIO arrangement: You said the supplied three fans come with a two header connector cable that fits the supplied controller. You mention that a three unit SL Infinity fan addition comes with a one header connector that must utilize a different controller (That Lian Li does this is enough to make you question their sanity.) Did you say that if three fans are bought individually rather than as a unit, the supplied cables wlll match the two header variety that comes with the AIO? Is there another work around that would be to purchase a separate two header cable for a three unit SL Infinity fan? This assumes that the connector at the end of the daisy chained 3 fan unit is the same as the connectors on individual fans. Just trying to write this down in an intelligible way makes me want to give up living and go shopping instead. But your reply would be greatly appreciated.

[@iipyro6202]

If I have the galahad 2 lcd and two triple packs can I make it all work or do I need single packs?

[@einfachNURsteve1]

Is it possible to connect an AL 120 V2 (with the wire from the single pack) on the controller from the Gallahad? The plugs fit in but I’m not sure if it works.

[@LordOcelot]

Nope, it is an SL controller, unfortunately.

[@delothh]

Hello! I have some questions about fan cabling. Did you use the controller that came with the 3-pack fans to connect the fans on the top and on the bottom? If yes, why not use the same controller that came with the AIO, since the 3 pack fans also come with a fan+rgb standard cable? If you were to connect the bottom and top fans along with the pump fans in the same AIO controller, would all of them be binded to the cpu fan speed curve? I am trying to figure out if I'll need to use another controller other than the one that comes the AIO, and what the drawbacks of using only that one would be. Thank you!

[@TheProvokedPrawn]

You could use the one that comes with the controller just fine. Though obviously only up to four groups. So you only have three spare when you've connected the fans from the rad. But that's fine

[@trevor759]

Can I know what software version you are on? I can’t get the LCD to display or show up in my L connect?

[@World_Shaper]

Really good video. I just have a question about the screws. Why can’t I just use the regular screws that come with the fans for the push fans? Wouldn’t longer screws puncture the rad?

[@TheProvokedPrawn]

I don't understand the question. How would you use standard fan screws to mount on a rad?

[@World_Shaper]

@ idk I just ordered mine and waiting on it come in. This will be my first time using one.

[@World_Shaper]

Oh I’m dumb nvm

[@World_Shaper]

@ i forgot how short those screws are

[@305gangsta777]

24:15 can you show how the other fans are controlled by same controller because i cant seem to figure it out

[@MrCrazyhack3r]

So if I buy the cooler and buy six infinity reversed blade fans and one standard infinityfan, does it bring the correct cables to daisy chain them to the aio controller ? @TheProvokedPrawn

[@emelloul]

Thank you so much for putting these videos together - it really helped a ton! There's one part that I'm confused about though because I bought the Gallahad-II SL-INF version and 3 more SL-INF-120's for push/pull - however, the cables that I got with my 3 pack to connect into the controller are the 6 pin version and not the one that splits out like yours and what comes with the AIO cooler. Where did you get the cables? I can't find them anywhere.

[@silhxuette3164]

On 2:01 do you need that the one next to the usb c or no?

[@TheProvokedPrawn]

Not with this cooler.

[@cemsengul16]

Do we have to use remoo fan control to make a fan curve based on Coolant Temp? I can't believe Lconnect 3 doesn't have coolant sensor as an option.

[@sekosis]

Could you use the v2 controller to control the pump

[@Gfrmbk]

Im guessing it’s possible to connect 3 reverse blade fans and the 3 pack infinity fans along with the Galahad 2 sl inf in the same connector? Preferably the one that coolers with the 3 pack?

[@progamingsmurf]

Can i use the control for the infinity fans instead of the galahad lcd controller. The connectors for infinity are thinner and are not split.

[@RathalosEmperor]

Did you ever figure this out?

[@kuzou3200]

wait so does the Lian Li Galahad II Trinity 360 come with a fan controller ?

[@joshgodwin55]

Hey I can’t find the part where you solve the problem of having the triple pack of fans work with the aio? Is there a time stamp?

[@joshuacollins789]

So do I just need to use the usb c connection on the pump and not the other one that uses a sata connection too?

[@JustAverageLarry]

So hypothetically.. if I got this AIO.. 6 single packs of reverse fans.. and 1 single regular fan.. I could technically group them all onto the one controller that comes with the radiator right? 3 groups of 3 which includes top side and bottom.. and the the last port for the single rear exhaust fan. Is that right? Would be a total of ten fans but 9 of them grouped in 3 and 1 solo

[@TheProvokedPrawn]

Yes I think so

[@JustAverageLarry]

@@TheProvokedPrawn sweet!

[@mika_97]

@@JustAverageLarry I was also planning on doing this, got all my parts but i found out that the single fan adapter cables have 1 cable that doesnt fit into the controller. Did you also run into this issue? If so what did you do to make it work?

[@maddmarkmusic]

I have the same AIO. My question is. Is that aio's controller enought for.the 7 reverse blade i bought? They dont have reverse.infinity pack in here. Please answer. ❤❤❤❤

[@asrai1013]

I’m just so confused, I have the GA trinity 2 with the SL-INF fans and all of my actual fan RGBs work but my top fan on that was with the AIO only the outer ring RGB won’t work. I bought a single fan to replace it thinking it was the fan and it’s still doing it. I have messed with the settings with the software and noticed when I’m clicking what I think was showing the positions of what fan was what, and the outer ring would light up blue; then it would go back to the setting I had it on and turn directly back off. So it shows the lights laughing up if that makes sense but they won’t stay on. Someone pls help 😭

[@tbanger9153]

Do you have a video woth how to connect the case fans I have the starter pack for the SL120 infinity and 6x reverse blade fans and the galahad LCD SL 120 infinity. Do I need to run two controllers as well?

[@TheProvokedPrawn]

kzbin.info/www/bejne/hmLCaYBsiJ6LgJI

[@idkman4211]

Wait so im planning on getting this aio and more inf fans do i need the extra controller or should i use the one from the aio

[@ChrisMSepulveda]

Do you connect the CASE fans on the aio controller as well? or just the aio fans? basically im asking is do you connect all fans to the aio controller...

[@Gfrmbk]

U can yes

[@mgmmotorz5004]

I have bought this cooler and also three to lcd fans love the way this looks and thanks for the help setting it all up with an easy guide to follow. Small issue I have is after the pc sleeps or is powered off the screen never returns to what it was set to display. Would appreciate any hints you might have to sort this. Thanks again

[@MistaKb808]

So I have to buy a bunch of single fans and not the triple pack for it to work with the aio control box?

[@TheProvokedPrawn]

You can use the triple pack controller instead if you like

[@RidgeKinney]

So you said that all of your non radiator fans are controlled by a separate lian-li fan hub, but that you could plug case fans into the same hub used for the radiator fans. But you plugged the radiator fan controller into the cpu fan header on the motherboard, so if you plugged them into that controller, wouldnt the motherboard then control all of your case fans based on cpu temp? If you adjust the curve in the Lian-Li software, does it take precedence over the motherboard controlling the speed?

[@Naeromusic]

So I found out my lian li o11 evo has slight clearance issue for the bracket so you CAN'T just open the back and take the old and put the new in...

[@TheOriginalShooter]

I have my cooler setup like yours but someone told me it’s wrong is that bad ? I don’t have fans on the back of my radiator

[@TheProvokedPrawn]

They're wrong. The only thing that you might want to consider is thermal throttling and whether the fans need flipping or if you have enough intake. kzbin.info/www/bejne/qYeoiZdjjNVrfLs

[@franciscofranco5739]

So I take it the infinity hub that comes in triple pack or as a kit is the best way to go for the wiring? (The ones with the flat connectors). My question is can you plug in the dynamic evo xl case rgb into those controllers? Like in the sync 1 and sync 2 ports?

[@TheProvokedPrawn]

yes and yes

[@franciscofranco5739]

@@TheProvokedPrawn btw for the record, I have used your videos exclusively to build my computer (always wanted to build a computer since the 00s but could never justify the expenditure). Your instruction in these videos has been instrumental in helping me. For what it’s worth, from a stranger on the internet, thanks for all the great content and help!

[@Ahzxi]

This is a silly question, but does the push pull config mean that the radiator fans are set to intake?

[@sjewkes1]

Excellent and detailed video as usual. I do have a slightly insane question: if one were to, theoretically, run 15-18 fans including the 3 on the AIO, is it possible to use the regular controller that comes with a 3-pack to do all of that, or would it make more sense to run the exhausts off the AIO controller and the intakes on the other controller? I assume they have the ability to sync up in the software with each other? This is purely theoretical and not the growing insanity of a madman wanting to build a completely unnecessary but beautifully mad build in an Enthoo Elite and just wanting to make sure there's a way to make it all work.

[@TheProvokedPrawn]

You can only run 16 fans max on the standard controller. If I recall correctly. 4 per port

[@sjewkes1]

@@TheProvokedPrawn Right, but the connectors for the AIO fans are a slight hiccup it would seem, since they have what amounts to the single-pack connector that the 3-pack control box doesn't seem to have a slot for, nor does it have the ports for the fan control since that's all on the one cable from the 3-pack sets. I assume the easiest solution is to use both control boxes in this instance, both because of the quantity of the fans and because of the needed fan control connectors, since the AIO itself plugs directly into the motherboard anyway.

[@isaacmorales5402]

i'm not sure, but why wee can't use the standar controller of triple pack fans insteand of this new controller for AIO?

[@TheProvokedPrawn]

Sure

[@isaacmorales5402]

@@TheProvokedPrawn I'm sorry, I write can instead of can't. How wee can connect AIO fans and case fans to the same controller?

[@Daniel-ur3mw]

If I want to use TL fans I would just be connecting the pump header and USB for the screen on the cooler and then rolling with the TL fan installation as nornal right ? One controller that comes with the LCD 3 pack and then single fans daisy chained, correct ? This is the same AIO that comes with the INF or Regular fans right ? So since I'm planning on swapping out fans no sense in spending the extra for the INF fans.

[@TheProvokedPrawn]

For the first part of your question the answer is yes. I didn't understand the second question.

[@NL_Python]

THANK YOU, so very much for showing the difference between the two L-Connect devices because I was very confused and still am a little bit… So if I have two extra reverse SL INF fans and one SL INF exhaust fan (all going in the (Lian Li 216) I would just have to plug them up separately and not with the daisy chain?? Also, does the L-Connect software not work when the fans aren’t connect to a L-Connect Hub???? First time builder and I’m so confused. All this stuff arrives on Wednesday and I won’t have the extra L-Connect hub if I will need it

[@rowentw]

Is there any way to switch the BLACK Cable of the single Fan on the backside to a White Color? I want to re-create this system but this cable color is ruining the whole build for me...

[@danielbaxmytov6664]

I have a question and could really use some help. I’m planning to install 5 Lian Li Uni Fan TL LCD fans in a Lian Li case, and I’m looking to get the LIAN LI GALAHAD II LCD 360 White liquid cooler for my CPU. The issue is, the fans that come with the cooler use a different connector that won’t fit the TL series. Is it possible to connect two different Lian Li fan hubs in the same system? Or maybe there’s a way to link them together? My motherboard has 2 USB headers, 1 JRGB, 2 SYS_FAN, and 1 CPU_FAN.

[@XeqtrM1]

I was wondering is it possible to switch out the fans with other fans?

[@TheProvokedPrawn]

You can remove them. I just swapped them for reverse fans

[@XeqtrM1]

@@TheProvokedPrawn thanks so much and sorry for bothering you:)

[@TheProvokedPrawn]

@@XeqtrM1 no need to apologise

[@Pfeiffer-fp2se]

boy oh boy did I get lucky! I bought 6 single reverse blades because I couldnt find a 3 pack of them anywhere and i ordered those 6 with this aio not knowing the 3 packs wouldnt be able to hook up to the singles. But if im understanding this correctly I can have 4 groups of single fans hooked up to the specific controller? It would be 3 groups of 3 fans top, side, and bottom, and a single fan in the back as its own group.

[@Eric-uk8oe]

Question what powers the pump to spin I was also using a sata power but this video says its not needed

[@TheProvokedPrawn]

The connection to the motherboard AIO pump or CPU header

[@ricardoalvarez6401]

Can i connect the fans directly to the mobo or i need the hub? I realy would prefere not to use the hub if possible....

[@ErnestoComignani]

I have a question, i seem to have gotten the 280mm with 2 fans .I cant seem to get the computer to detect the fans , doesn't show me the rpms or nothing but it does light up along with the lcd . What would be the reason for everything to work but the fans function. This model didn't come with a controller so i assume it should work with out or do i need the controller for it to be functionable ?

[@Siddiqimus]

Can you use the old l-connect hub for the aio radiator fans, or is it incompatible?

[@krreepp]

are the tubes quick disconnect? cause it had me confused how the final product tubes were arrange in a way where you must need the tubes to be disconnected and reoriented to have that clean run.

[@jollygreen68]

I just purchased this unit, as well as 9 UNI Fans (7 120 TL's and 2 140 LCD TL's). I don't like to use my motherboard software to control any of this stuff, I just want to use L-Connect to control the RGB and fan speed. So do which cables do I need to plug in and which ones do I NOT need to worry about, if that's all I want to do? Thanks

[@TheProvokedPrawn]

Don't need to worry about the 5v RGB connector but do use pcie power and usb connections

[@Sgv76]

Idk if I’m doing something wrong, but I checked my connections and they should be good, when I turn on my pc the lcd screen turns on and does the intro but it turns back off. I downloaded the software but for the fans and it doesn’t show the other program for the ga 2 lcd sl inf 360

[@TheProvokedPrawn]

Make sure the USB connection is fully plugged in on the display. It's really easy for that to be slightly loose.

[@danielhunter6431]

I got the non infinity version but i want to use my sl v2s. Im assuming i just dont use the large plug on the pump? Im just going to let l connect control the fans like it already was.

[@rickandrewdellosa6637]

Sorry for the noob question. But can the lian li Hydroshift be set up the same way you did here? :)

[@TheProvokedPrawn]

kzbin.info/www/bejne/e5mke5-HhrKDnKc

[@frixion4847]

Aio is plugged in correct fan is plugged int fan header correct. Everything works. Bios doesn’t recognize cpu fan. What is the fix

[@TheOnlyEpisode]

I have a question about that new L-Connect controller. So I initially purchased 2 of the Infinity 3 packs as well as a single for the exhaust fan at the back. But as you know, the infinity mirror only shows up in the exhaust position and you lose that if you flip them. And the reverse blade intake model only comes in singles, not a 3 pack. So I was thinking of exchanging them and instead buying 6 single reverse blade Infinity fans, so that I can properly exhaust and intake the way I want to, and still keep the mirror effect. However, the singles don’t come with an L-Connect controller like the triple pack does, so I would lose that and would instead have to use the controller that comes with the new Galahad. That’s fine by me, but I’m just curious if this controller would support that set-up? It looks like this supports up to 4 full sets of 3. So I would have 3 sets of 3 plus the singular exhaust fan. Would the single fan plug into this? It’s only the 3 packs that use the 2 plug setup, correct?

[@AytacYildirim]

Hello what did you do about this ? Having similar problem

[@ImgCrisp]

Can you make it display cpu temp?

[@s_w_a_t_9115]

Can 3 140mm fans fits on the bottom of the nzxt h9 elite

[@BWILL10]

Anyone know if I can daisy chain two 3pks and a single infinity fan into the AIO cooler? Or is there not enough ports on the AIO controller?

[@vincentnicholas64]

what adapter do i need to connect Lian Li UNI FAN SL-INF 120 Reverse Blade to this controller? specifically the rgb pins.

[@vincentnicholas64]

since Lian Li UNI FAN SL-INF 120 ARGB Reverse Blade comes with a 5v rgb cable

[@mika_97]

@@vincentnicholas64 what did you end up doing? i just opened my fan boxes and saw this too

[@donovanwalker7908]

Great video. I am building a new PC with the GA II lcd sl-inf 360 and the sl-inf 120 gans for the case. What i need to know is which way the air flows through the fans. Last PC i built, my case fans all had an arrow on them to show air flow direction through the fan. On these fans, there is the mirror side and the side with the design.

[@TheProvokedPrawn]

The mirror side is the pull side (intake)

[@BlackOut300FPS]

So the AIO Pump will run just by the PWM connector and the LCD/rgb stuff is controllable via L-connect by just plugging the USB cable to the motherboard?

[@mightyakkylex]

Do I need the controller if I take the fans off and swap them out for something else?

[@aerobiker8230]

Question, if i use the AIO controller, can i plug there also other case fans? and if from the controller i plug directly on the mobo do i still need to use the Usb connector?

[@PandaManFPS]

So if I’m planning on using the L connect software to control all the fans and rgb, I don’t need that additional split rgb/pwm fan cable in the controller right? Just the usb? I also plan on having 4 groups of fans on this one controller, will all the fans be controlled with the l connect software without the need to plug into a fan header ? Any help would be greatly appreciated. Trying to figure this out for like a week now

[@Trystan_Rose]

So if I want the galahad 2 lcd and 4 additional uni fan sl-140s, and 3 additional sl-120s, I have to buy the sl-140s individually and a 3pk of 120s, and run both L-connect controllers in my case?

[@bluextv1882]

Please help me, i’ve a GALAHAD ii inf radiator, 3 pack sl inf and 1 fan sl inf. if I use only the aio controller, i havent got an adapter to Connect the single fan to the aio controller, but i just cant set up a second controller (the one who came with the 3 pack) because i’ve only 2 usb ports on my mobo. What can i do?

[@TheProvokedPrawn]

kzbin.info/www/bejne/mmnZdn-YjLyUebM

[@xsistlol]

my manual saying that using the wrong screws for the pumphead. LGA1700 is the screws without dots.

[@walterwilmoth8390]

Ypur videos on lian li are awesome. But im in the situation where the connectors are differnt from the aio controler so i have 2 controllers but you mentioned you were going to cover that but i didnt see it or missed it. Im kind of stuck with differnt connectors and not sure what to do

[@medvezhon_ok]

I can connect ARGB, fans directly to the motherboard?

[@FredGuidi]

my LCD keeps disconnecting and connecting again and it does the sound like if you were pulling out an flash usb, every cable is clicked and secured in place but i wonder if i should also connect the cable on that port next to the usb type c

[@TheProvokedPrawn]

are you sure the LCD's USB-C cable is fully plugged in? it seems very easy to not fully seat (I made that mistake). Also check for firmware updates as Lian Li has released several since.

[@MitchDavid]

Great description! Thank you,. Wish I would have found this before I spent about 45 mins trying to understand the wring, and the manual. That plug that is not needed for the Infinity version was baffling me. >

[@aglancy17]

I have a question on the fan setup. First off thank you so much for your videos, you have helped me tremendously in my first build. Cheers to you mate. Anyway, i have am building my first computer and have gotten everything else working correctly.. except my AIO and 3 vertical fan stack. I'm using the Lian Li Galahad 2 LCD Infinity + all Lian Li Infinity Fans. I have all of the fans connected to the AIO controller with the 2 power cords (compared to the thinner flat single power cord alternative). My fan sets are: 1. 2 140 fans daisychained on bottom of case 2. 3 120 fans daisychained vertically 3. AIO 3 120 fans mounted on the radiator (default) 4. 1 120 fan solo on back of case When all are plugged in, i get the AIO screen to turn on, but otherwise no power/RGB to the AIO fans. Also the 3 120 vertical fans are off and no RGB. But the 1 120 fan and the 2 140 fans turn on fine. First build so I'm not super experienced. The only thing i can think of from watching your videos is I'm potentially overloading the AIO controller? i need to use the 3 stack fan controller as well with most of the other system fans potentially with the single flat thin power cable feeding into it to lessen whats put into the AIO controller? Which that may fix my problem there, but i still havent been able to get the AIO fans on/RGB even when it's the only thing plugged into the AIO controller. Super confused on what my issue could be. Any further clarification needed please let me know. Thanks for all that you do!

[@kosukaa3080]

J’ai une question je peux connecter mon watercooling galahad 360 sur le splitter des ventilos ?

[@Mohamed-aliB.-fw9vg]

where do we get those lightning cables ? are they also from lian li ?

[@TheProvokedPrawn]

kzbin.info/www/bejne/iZuyqqJofZtsrNk

[@Mohamed-aliB.-fw9vg]

@TheProvokedPrawn Thanks you really are the best when it comes to help peoples build pc

[@dozilla77]

Prawn, question, what position in the EVO XL do you recommend installing the Motherboard when using this AIO with 420mm fans along the bottom and side panel of the case as well as 2 EA 120mm SL Uni's back? Should I go for the middle position (I see there are 3 choices?)? I'm assuming the cables will be long enough to route them behind the mobo and into the USB 2.0 header.

[@Let_The_World_Burn]

These fans may be a bigger headache than they are worth. So I bout 3 single pack 120mm reverse SL infinity fans and 2 140mm reverse Sl infinity fans. I then bought the UNi fan Sl infinity controller which uses the wide flat connectors.....but the Aio comes with a different controller and wires....what in the world do I do with all of this ?

[@TheProvokedPrawn]

Just ditch the AIO controller and use the standard one

[@Let_The_World_Burn]

@@TheProvokedPrawn Is it possible to use the controller that come with the AIO just for the AIO and use the standard controller with the case fans ? I am out of 7 pin connectors so just wanted to check

[@johnnyklassicz]

Pc part picker flags a disclaimer on the clearance of this pump with the ram on the z790a Maximus 1700 motherboard, why?

[@young-j731]

Hey you can put 2 fan on the rear

[@TheProvokedPrawn]

If you mean in the case, yes kzbin.info/www/bejne/e17XaaCKYs6KlaM

[@1HerculePoirot]

Quick question. What is the default behavior of the LCD screen, if not using the L-connect software? Are all settings only in the software, or are any actually stored in the pump head head?

[@ChoZeke01]

This Video is amazing first of all, helped me build my first pc perfectly. but i have an issue where all my fans spin and all the rbg works on all my fans spin, however only the Fans on my AIO cooler actually change color within L connect 3. would you happen to know why? i cant find anything on it

[@TheProvokedPrawn]

kzbin.info/www/bejne/kIOuiHWrhZWAaLs

[@cldunkin8145]

I do appreciate your methods of teaching, I have learned a lot. I do wish you could show how to do this without "a dozen" fans and the controller. I have a matx case, one 360 aio, one in end and two on the bottom daisy-chained together. Now do I connect them to the board or the pump?

[@allenaraujo4473]

Ahh so i got the infinity LCD and bought a triple pack of infinity fans so i gotta use both controllers correct? Theres no other way to connect them to one controller?

[@TheProvokedPrawn]

You can use just one, that's fine

[@allenaraujo4473]

@@TheProvokedPrawnyea but the galad infinity controller is different from the infinity controller that comes in the triple pack

[@aytacercen944]

Instructions that came with my Galahad II LCD S-INF 360 show the screws to mount the pump head for 1700 to be the screws that had no markings on top, The ones WITH the four dots are supposed to be for LGA115x, 1200 and AM4. They show the LGA 1700 and AM5 should use the four screw that had no markings. I thought you may want to know.

[@jackrattray8837]

Can you use this AIO in the Evo Dynamic case I see almost no builds with this aio and using the evo dynamic

[@TheProvokedPrawn]

Yes of course. I used it in the RGB version which is newer but it would fit in the Dynamic Evo and other cases that can handle a 360mm rad. kzbin.info/www/bejne/mV6TiIptbMSZg5o

[@jackrattray8837]

@@TheProvokedPrawn thanks a lot

[@CreepperReaper]

I wonder if it fits a Lian Li Lancool II Mesh ATX Mid Tower Case

[@hollisnelson5925]

Hello Provoked Prawn. Can you help me with how to setup the Lian Li GA II LCD 360 (non infinity fans version) with the Uni Fan SL 120 V2 fans. I want to use the controller that comes with the 3 Pack of the SL 120 V2's, but I cannot find how to properly wire the GA II LCD 360 with these fans and the controller that comes with them. If you good help me with a guide or point me to where I could find one for this combination I would really appreciate it.

[@kky7537]

Aio include controller?