honest review ben, 👍👍 you had some ASMR going on there whilst filling the organizer😉🤣👍👍👍 atb Kev
@BensWorkshop Жыл бұрын
True... Could do an ASMR doing that. Many thanks for watching!
@henrymurawskibigdogrepair Жыл бұрын
Two. Great minds think alike. I also use organizers like that for all my TIG welding parts.
@BensWorkshop Жыл бұрын
I will also have space for all sorts of other things! Many thanks for watching Henry, hope you are well!
@send2gl Жыл бұрын
Looks quite a neat place to keep the numerous odds and sods that one accumulates when one is needed but sold in packs of 10.
@BensWorkshop Жыл бұрын
Yes, but also for hobbies where small bits and bobs are needed. Many thanks for watching Geoff, hope you are well.
@prime553 Жыл бұрын
Those are handy Ben I must look out for them
@BensWorkshop Жыл бұрын
At that price (2 sets for £20) they are! Many thanks for watching!
@MarkMcCluney Жыл бұрын
For three quid-ish a shot I'd call those a nice bargain. One small tip - don't store them in anywhere that gets direct sunlight. The transparent plastic gets quite brittle after a while and I think it's sunlight (UV maybe?) that does it. Cheers Ben, thanks for that mate.
@BensWorkshop Жыл бұрын
Many thanks for the tip Mark, I will take that into account. Also many thanks for watching!
@fabrizioviscardi40 Жыл бұрын
Interesting and suitable organiser, cheers Fabrizio - L 4
@BensWorkshop Жыл бұрын
Certainly useful for me! Many thanks for watching!
@fabrizioviscardi40 Жыл бұрын
@@BensWorkshop Thanks for sharing my friend Ben!
@enginelover1 Жыл бұрын
Thanks for this review.
@BensWorkshop Жыл бұрын
You are welcome! Looking forward to your video from the show Saturday week. Many thanks for watching!
@enginelover1 Жыл бұрын
@@BensWorkshop It will be the weekend after next one. Hope I get a good video on Friday or possibly Thursday and upload it till Saturday. Right know I am uploading another engine video. New engine that never made it to youtube before, I filmed this one last week when I did the water pump test.
@BensWorkshop Жыл бұрын
Yes, the same weekend as the Sussex Steam weekend. I will be there hopefully and producing more videos. Looking forward to yours as well as the new engine.
@mr1pearl Жыл бұрын
Great for metal parts/bits/stuff I could use a few more 👍
@BensWorkshop Жыл бұрын
Absolutely. I think I have enough for now myself though. Many thanks for watching!
@KensSmallEngineRepair Жыл бұрын
What a bargain! Great for Carb parts!
@BensWorkshop Жыл бұрын
Absolutely! And I have lots of them! When are you doing the next Kohler K series video? Also, many thanks for watching!
@GrumpyTim Жыл бұрын
I bought a set of those when they were around last year (only three of them), and bizarrely I haven't used them yet, things are still rattling around in this box and that - project for a rainy day, IF I can get the bench clear, the last project is still very much filling up the bench!!!
@BensWorkshop Жыл бұрын
You might have noticed that my bench is not entirely clear too.... Many thanks for watching!
@GrumpyTim Жыл бұрын
@@BensWorkshop That's the sign of a bench that's being put to good use and not just there for decoration.
@BensWorkshop Жыл бұрын
At the moment it appears to be just holding stuff off the floor....
@Everythings_Adjustable Жыл бұрын
Those look good for the money Mate 🛠👍😊
@BensWorkshop Жыл бұрын
Reasonably good for the money if you buy 2 to get the offer, yes. Often they are expensive. I had looked on Amazon and decided to wait for Lidl and this offer. Many thanks for watching!
@turboconqueringmegaeagle9006 Жыл бұрын
Recently bought the Stanley "storemaster" equivalent, am finding the interlock a little tedious in the shed, ideal for what I'm assuming is their intended use for field repairs. At lidl prices I would have removed the latches by now. Thanks you as always Benedict.
@BensWorkshop Жыл бұрын
They don't get in the way not in use... But yes, you don't mind being a bit rough at those prices. Do let me know if there's any chance you might wants more Lister SR bits. I can easily get cylinder heads, barrel, pistons with rods etc. Many thanks for watching!
@turboconqueringmegaeagle9006 Жыл бұрын
@@BensWorkshopthat's very kind of you, I hate the idea of it being scrapped and encourage you to save it and stick it on marketplace but realistically I don't need it, I have one sr2 in good condition and 2 that sat exposed and will probably only be good for parts.
@BensWorkshop Жыл бұрын
If the crank is good, and the cam shaft is good, then I can get a complete top end. Suppose I could get the bits and stick them on market place.
@rainbow2710 Жыл бұрын
Hey! I think I'll get me one of those - or similar - and get rid of the boxes and jars. Great. Cheers.
@BensWorkshop Жыл бұрын
Not a bad plan! Bottles and jars can be useful particulalry for fluids but these are better for nuts, bolts and other odments. Many thans for watching!
@TheKnacklersWorkshop Жыл бұрын
Hello Ben, Not bad value if you need the 6 boxes... thanks for sharing... Cheers. Paul,,
@BensWorkshop Жыл бұрын
Not bad value at all. Many thanks for watching!
@michaelhutin5451 Жыл бұрын
Next purchase, a sticky label printer.
@BensWorkshop Жыл бұрын
I have access to one at wok... But yes, labeling the boxes is a good idea. Many thanks for watching! Please like, share and if you like the channel, subscribe!
@roystheboy Жыл бұрын
not bad for the money whats the sizes of the compartments when the spacers are in
@BensWorkshop Жыл бұрын
Certainly are! Good for what I need them for. Hope you are well Roy and thanks for watching!