Hi Ben. We share a lot of common interests. Unfortunately
@BensWorkshop17 сағат бұрын
Unfortunately? Many thanks for watching, please like, share and if you like the channel, subscribe!
@Andrewlone1743 күн бұрын
wheel nuts is nothing, better rusted suspension bolt
@BensWorkshop3 күн бұрын
Oddly I did use that one on suspension bolts. However the battery one is better. Many thanks for watching, please like, share and subscribe!
@Mrremusakajack6 күн бұрын
How many CC??
@BensWorkshop6 күн бұрын
I don't know where I am but it is either 1.5 or 2 HP so is quite powerful. Many thanks for watching, please like, share and if you like the channel, subscribe!
@sealslayer7 күн бұрын
I look forward to Lidl restocking these, I went today to check the stock in store but no joy.
@BensWorkshop7 күн бұрын
They are quite handy! Many thanks for watching, please like, share and if you like the channel, subscribe!
@kenpeek43807 күн бұрын
Would lubrication solve that problem from happening again in the near future?
@chezburger178111 күн бұрын
helpful guide, nice engine!
@BensWorkshop11 күн бұрын
Many thanks, I am pleased it as useful! Please like, share an if you like the channel, subscribe!
@chezburger178111 күн бұрын
@@BensWorkshop course!
@BensWorkshop11 күн бұрын
@@chezburger1781 Thank you.
@ginomestria11 күн бұрын
Traduzione in Italiano? GRAZIE
@BensWorkshop11 күн бұрын
La traduzione italiana è grazie a KZbin. Di niente! Grazie mille per aver guardato, per favore metti mi piace, condividi e se ti piace il canale, iscriviti The Italian translation is thanks to KZbin. You are welcome! Many thanks for watching, please like, share and if you like the channel, subscribe
@daveduznotrull12 күн бұрын
another one for you with these bad nuts that are the same as ford nuts the tops snap off if you get this get a 20mm hole saw from bosch with the auger bit take out the pilot drill bit and drill to the back washer and they come striegt off takes a few minuits per nut no damage to wheel or stud take your time rund drill slow and keep it cool or as best you can then you get the bit thats left on the stud off with a paire of mol grips easy lernt this from an aa guy in uk and i work in a garage
@daveduznotrull12 күн бұрын
nice try but surgest you get an impact gun air or electric buz them off also to get them horiblle nuta off your socket stick the socket in a vice not stupid tight but just griping it and tap a small drift pin that will fit throught the center of the socket god bless. always use 6 point sockets with stuff like this too
@BensWorkshop12 күн бұрын
At that time I did not have one, besides which you would need to hammer the socket on. Many thanks for watching, please like, share and if you like the channel, subscribe!
@rinaanderton532220 күн бұрын
Just improve your camera focusing
@daveallen256521 күн бұрын
This is a joke in it ? Lol
@goddlediddles22 күн бұрын
You've done 4 great videos, Ben. Many thanks - all were extremely helpful. I wonder could you tell me where I can get a new strimmer head - my own hit a tree and the eyelets and spring went for a flying journey into the long grass. The Komparnass website sells one for a similar model, designated PBK 4 A2. It looks nearly the same but a little different all the same. I can find no mention of spare parts for mine/your model PBK 4 B3 anywhere on the internet. Any help would be most gratefully received. Godfrey.
@BensWorkshop22 күн бұрын
It takes a standard M10 left hand threaded head. For example: www.amazon.co.uk/dp/B089NQBMNN/?coliid=IEYAQAEUZ3PIY&colid=5X5HSLDJMO93&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it Many thanks for watching, please like, share and if you like the channel, subscribe!
@goddlediddles22 күн бұрын
@@BensWorkshop Many thanks, Ben. That's great. Just now liked and subscribed.
@BensWorkshop22 күн бұрын
Many thanks.
@camilocuervo604625 күн бұрын
No seat belts no ulez where in the uk is that wonderful place 😀
@AngbisayasaAlemanya25 күн бұрын
Cool 😎
@oli23026 күн бұрын
I bought one ofvthese a while ago and knew it would come in handy for something one day. I got it out today not knowing how to use it, so thank you for this video.
@BensWorkshop25 күн бұрын
You are very welcome! Many thanks for watching! Please like, share and if you like the channel, subscribe!
@user-zl2ny8uj7q28 күн бұрын
True beast machine. I bought one of this Parkside chainsaw 20v PKSA20-LIC3 Mid May 2024, luckily the one I bought was the last one in my local Lydl. I think Lydl stopped selling this series. but there's a new one but it's smaller. There are also some others from Parkside called Pruner for long reach branch cuts. They are good stuff the product items made by Parkside.
@BensWorkshop28 күн бұрын
Certainly a good useful machine. Many thanks for watching, please like share and subscribe!
@OldskoolK31Ай бұрын
Thank you, very helpful indeed
@BensWorkshopАй бұрын
I am pleased it was helpful. Many thanks for watching, please like, share and if you like the channel, subscribe!
@MarkWalker-on2feАй бұрын
Thanks for the vid - so useful. I have the same mower and did what you showed here when wouldn't start. Found the main jet had jellified fuel hanging from it. Washed the carb in petrol and used a brush to clean out. I was so happy when it started! Will now always run the tank dry before storing! Thank you!
@BensWorkshopАй бұрын
I am pleased it helped! Many thanks for watching, please like, share and if you like the channel, subscribe!
@timtaylor1365Ай бұрын
The power of steam well demonstrated. Also diesel traction . What was the British tank named "Bulldog"?
@BensWorkshopАй бұрын
I do not recall the name of the tank. Many thanks for watching! Please like, share and if you like the channel, subscribe!
@BensWorkshopАй бұрын
Also hope to go to the same show next weekend.
@jamesbockman4360Ай бұрын
That shop is a fire hazard
@BensWorkshopАй бұрын
No. The stuff that actually catches fire easily is not close by.
@MoranguinhodoNordeste500Ай бұрын
boa tarde passando para fortalecer
@soulmaster-7Ай бұрын
Ging sofort zurück, nichts funktionierte.
@soulmaster-7Ай бұрын
Ging sofort zurück, nichts funktionierte.
@BigRedPropFromHellАй бұрын
Thanks for these, very helpful. What oil should you buy if you run out of what has been supplied?
@BensWorkshopАй бұрын
Oil for which part? The chainsaw bar takes chain saw bar oil, which is about as much as I look in to it. I use general purpose 2 stroke for the fuel oil. Many thanks for watching please like, share and if you like the channel, subscribe!
@georgiojansen7758Ай бұрын
reopening lidl shop , bought it for 29.95€ included battery and charger, perhaps they sell it again. 5 June 2024 in City EDE ,netherlands
@BensWorkshopАй бұрын
That is a good price. Many thanks for watching. Please like, share and if you like the channel, subscribe!
@georgewilliams2121Ай бұрын
Brilliant, same mower, same issue, followed your video and now works perfectly. Thank you very much
@BensWorkshopАй бұрын
You are very welcome. I am pleased it helped! Many thanks for watching, please like, share and if you like the channel, subscribe!
@roberthanson5488Ай бұрын
Great video. I had a bit stuck solidly in the chuck of my DeWalt dw996 drill. After looking at the video, l placed the drill bit in the vise, sprayed some Kroil on it, tapped the chuck with a hammer, and off it came. Thank you !!!
@BensWorkshopАй бұрын
You are very welcome! I am pleased it helped. Many thanks for watching, please like, share and if you like the channel, subscribe!
@KAISERDJGАй бұрын
Bens workshop is full of things he will definitely use ... one day!
@BensWorkshopАй бұрын
One day.... Many thanks for watching, please like, share and if you like the channel, subscribe!
@paulcarroll1545Ай бұрын
Is there any disadvantage to using the rotating blade as a strimmer for soft weeds?
@BensWorkshopАй бұрын
Not particularly. Depends on what else is around it. It is not good to use it where it might knock into brick or concrete. If you are away from hard things, fill your boots. Again, many thanks for watching.
@paulcarroll1545Ай бұрын
I have one of these, found your videos today, much better for me to watch your videos than read that manual, I just wish I had 4 arms when putting it together !!! Thank you for the easy to follow videos.
@BensWorkshopАй бұрын
You are very welcome. I am pleased they helped. Many thanks for watching, please like, share and if you like the channel, subscribe!
@jimervlogАй бұрын
Wow nice watching here done connect with you my friend ❤
@timerb3487Ай бұрын
I don't like beating on my power tools, but it worked! And the drill still works. Thanks for the info
@BensWorkshopАй бұрын
You are very welcome. I don't recommend beating on power tools for no reason! Many thanks for watching, please like, share and if you like the channel, subscribe!
@Apostate-51Ай бұрын
I haven't actually powered up mine yet, just tried it out for handling familiarity. The bit sticking out of the fore-handle kept poking me in the thigh and crotch. I can't see the point in it, what's that bit for? Is it ok to use the tool having reversed that handle with the sticky-outy bit on the other side?
@BensWorkshopАй бұрын
I am not sure which part you mean. I carry mine on my right hand side where it is not a problem. Also maybe your harness is carrying it too low. Many thanks for watching please like, share and if you like the channel, subscribe!
@mcgeoughseph2 ай бұрын
Great video. Help me loads
@BensWorkshop2 ай бұрын
You are welcome. I am pleased it helped! Many thanks for watching, please like, share and if you like the channel, subscribe!
@collumward1152 ай бұрын
Had the same issue with the strimmer head. If you bend the tabs outward it catches fine. Never had a. Issue since
@BensWorkshop2 ай бұрын
I expect that would do it. Not had it myself though. Many thanks for watching, please like, share and if you like the channel, subscribe!
@anthonykandes96832 ай бұрын
Good on you 👍
@BensWorkshop2 ай бұрын
Many thanks. Glad you liked it. Please like, share and if you like the channel, subscribe!
@nigelstarnes32562 ай бұрын
Had the same problem with my Champion mower - would start on full choke , but stalled as soon as you backed the choke off ...... This video gave me a good idea of what to expect as I took the carb off & how to clean it out . Put everything back together & now it runs 100% 👍🏻 Result !!!
@BensWorkshop2 ай бұрын
Most of the time it is a dirty carburettor! Well done. (I have another I must fix which isn't.... Though the carb will need cleaning too). Many thanks for watching, please like, share and if you like the channel, subscribe!
@adakt122 ай бұрын
Really thanks.The string is 2.4mm can I use 3.4mm?
@BensWorkshop2 ай бұрын
You can always try but may run into issues with feeding the thread. If you can, buy some 2.4mm thread. Many thanks for watching, please like, share and if you like the channel, subscribe!
@adakt122 ай бұрын
@@BensWorkshop Really thanks I will buy 2.4mn.All the best from Greece.
@BensWorkshop2 ай бұрын
You are welcome and many thanks! May God bless your day.
@BjørjaBear2 ай бұрын
I used a 210 all winter for hiking and backpacking here in Norway this year. Very reliable stove if you've done due maintenance. The Optimus 111 is often hailed as bombproof, but the 210 has less parts and is in my opinion more reliable.
@BensWorkshop2 ай бұрын
I use them for making tea and get to carry it by car to where I am going so use the large one. If I was hiking I'd probably take my Primus No 96 which is very small, cute and sits in a tiny box. Many thanks for watching, please like, share and if you like the channel, subscribe!
@chrisyboy2192 ай бұрын
What's with the weird 500nm extract but only 100nm tighten? Is there any way around that? Any modification could be performed?
@BensWorkshop2 ай бұрын
It is so you could not possibly over tighten. Not as far as I am aware. The battery one does up to 500 both ways so I prefer it. Also means I do not have to run a main lead out to the car which is where I mostly use it. Many thanks for watching. Please like, share and if you like the channel subscribe.
@andrewjackson44222 ай бұрын
Your video has been really helpful but I need help with the actual wires of my Brook Gryphon motor. A1 is a unsheafed wire Z2 is a red wire. Z1 is a red wire A2 is the same as A1 unsheafed.
@BensWorkshop2 ай бұрын
Basically you have an A coil and a coil. You should see resistance on the A coil of between 3 and 10 ohms depending on the power output of the motor. You might not see any across the Z coil due to the capacitor. However you can check by opening up where the capacitor is checking continuity to one end of the Z coil you should then find the resistance between the other end of the capacitor and the other Z lead. Should be greater than the resistance of the A coil. Once you have confirmed this, put mains across the A coil, and jumper the Z coil across the A coil coil. To reverse the motor try swapping the z coils relationship to the A coil. When testing, wear gloves and plug the motor in via a switched outlet you can easily reach. Hope that helps. Please like, share and if you like the channel, subscribe!
@BensWorkshop2 ай бұрын
Can you let me know how you get on?
@AlessandroAngotzi2 ай бұрын
Any tip on how to fix the choke lever if the spring jumped off? Bought one last week and that's the first thing that happened!
@BensWorkshop2 ай бұрын
Odd. Short answer is not because it has not happened to mine. However you can just get it changed for a new one at Lidl. Many thanks for watching, please like, share and if you like the channel, subscribe!
@garynoakes6762 ай бұрын
Thanks Ben. Just bought one it's awesome but instructions could be better so your videos did help. Have you thought about making a montage of all the dropping items! made me smile haha, thanks again.
@BensWorkshop2 ай бұрын
I am pleased that you found my video helpful! I had not thought of making such a video.... Would take a lot to go through all my videos getting them. Many thanks for watching! Please like, share and if you like the channel, subscribe!
@garynoakes6762 ай бұрын
@@BensWorkshop Will do! keep up the good work Ben.
@BensWorkshop2 ай бұрын
@@garynoakes676 Many thanks and will do.
@hairycanary32382 ай бұрын
Thank you so much. Now I know what the water drips are, I can fix it. Many thanks 👍💯
@BensWorkshop2 ай бұрын
You are very welcome! Many thanks for watching please like, share and if you like the channel, subscribe!
@PASHUR2CC2 ай бұрын
This guy is idiot: watch 30 minutes for unboxing ? Is handicap guy ...
@johnnystromberg2 ай бұрын
Very useful... The manual isn't very clear on the assembly 😅 cheers
@BensWorkshop2 ай бұрын
You are very welcome! I am pleased my video was helpful. Many thanks for watching, please like, share and if you like the channel, subscribe!
@henribroekmans31872 ай бұрын
Hello ben, thank you very much! You helped me a lot. Greetings from the Netherlands
@BensWorkshop2 ай бұрын
You are welcome! Many thanks for watching, please like, share and if you like the channel, subscribe!
@chucky23162 ай бұрын
You in devon brother
@BensWorkshop2 ай бұрын
No, I am in the middle of Sussex. I presume you are in Devon though. Many thanks for watching please like share and if you like the channel subscribe!
@chucky23162 ай бұрын
@BensWorkshop yeah I'm down here in sunny Devon. thanks for the videos i purchased one of these machines yesterday they look good is youres still going strong sorry I meant the lidil 4 in 1 petrol machine
@BensWorkshop2 ай бұрын
Ah. I have a follow up video of getting it running better. In this video it was slow. I have got it running faster.
@BensWorkshop2 ай бұрын
Just re read your comment. Yes the 4 in 1 is still going strong!
@chucky23162 ай бұрын
@BensWorkshop good to hear thanks I might have to re watch the videos if i get stuck
@pauleades90372 ай бұрын
I use Aspen 4 naptha (UK), in my 8R, which is cheaper than Colemans. I also purchased a 1L stainless steel camping kettle, which works a treat!
@BensWorkshop2 ай бұрын
If it works for you that is fantastic! Many thanks for watching, please like, share and if you like the channel subscribe!
@enginelover12 ай бұрын
Recently I teared up a trousers and a sawing machine came to mind to try repair it, but unfortunately time is always against me
@BensWorkshop2 ай бұрын
Yes. There are many things that press on our time!