LIEBHERR LTM1750 - 9.1 with 56m Luffing Jib Setup

LIEBHERR LTM1750 - 9.1 with 56m Luffing Jib Setup | Part One

Рет қаралды 178,923

11 ай бұрын

Here is the LIEBHERR LTM1750 - 9.1 from Peck Tiong Choon being rigged with 56m of Luffing Jib on a closed road of Singapore. It's being used for the dismantling of a tower crane.
CAMERA GEARS I USED:
=================================================
CAMERA:
Canon EOS R50 - amzn.to/3KWhgn3
Canon RF 24 - 105 f/4L - amzn.to/47J8IK9
Mic:
RODE VideoMicro - amzn.to/3OYxqNU
=================================================
Like my video? Please give a like and subscribe to my channel!
/ sgheavyvehicles
To see more photos of such heavy cranes in action, please visit my good friend’s page on Flickr too!
flickr.com/photos/30298424@N0...
-Find Me On-
Tiktok: www.tiktok.com/@sgheavyvehicles
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product with the links that I provided, I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel!
#mobilecrane #crane

Пікірлер: 31

@RcNutchareeCranes 11 ай бұрын

LTM 1750-9.1 is really amazing crane..Love that❤ Great job👏👏👏

@SGHeavyVehicles 11 ай бұрын

Thanks a lot!

@colelje 11 ай бұрын

Wah. Can't wait for part 2! Side note.. Would it be possible to add in a comment to show what the crew is doing at a particular point in the video? Like extending outriggers, adding counterweight base plate etc

@SGHeavyVehicles 11 ай бұрын

Sure! Thanks for the feedback!

@shabirleila5877 27 күн бұрын

Power lah shawn and chester!

@Squirrel_101 10 ай бұрын

Super cool video! Not sure why KZbin sent me to this, but I sure do love it

@SGHeavyVehicles 10 ай бұрын

Thanks for watching!

@wayneinnc5379 10 ай бұрын

Excellent!

@SGHeavyVehicles 10 ай бұрын

Many thanks!

@paulbell1835 11 ай бұрын

I thank it’s very interesting that they put on fall protection and then don’t use it but once or twice

@kcnmsepognln 9 ай бұрын

Yes, exactly! They have 2 clips so should be attaching to a second point, before detaching from the first. But working in a harness is awkward enough without being clipped-on, so some workers become relaxed about it... until they have a fall. Supervisors should be pulling them up on it, there seem to be enough of them. Not sure fall arrestors are appropriate anyway, as they are working at different heights: too low and they hit the deck before it fully deploys. Looks like a job better done out of a MEWP as far as possible and if someone has to be on the crane, then an inertia reel or airbags (or possibly a fall restraint) would be preferable.

@user-so8yg6yn6r 9 ай бұрын

ما شاء الله..تبارك الله..

@ridhobaihaqi144 11 ай бұрын

An entertainment fo lunch break

@jeritupang.jt.6259 8 ай бұрын

Luar biasa..mantap

@user-pw7ik1lm7i 11 ай бұрын

So huge crane😮😮😮

@jeritupang.jt.6259 8 ай бұрын

Alat yang cukup canggih

@harryscott9533 11 ай бұрын

Great video 🤓🙋‍♂️👍

@SGHeavyVehicles 11 ай бұрын

Thank you 👍

@karmakanal466 10 ай бұрын

👍👍👍👍

@jeritupang.jt.6259 8 ай бұрын

Indonesia.❤❤❤❤❤❤

@josland703 10 ай бұрын

wow

@khtan7491 8 ай бұрын

Consider speeding up the video. As in most construction worksites in Singapore, one worker will do the work and several other will hang around, watching but not doing very much. Good to add the basis why this crane was selected.

@SGHeavyVehicles 8 ай бұрын

I did consider speeding up before, but i feel it affects the overall mood because it can feel like im rushing through. Would you prefer short snippets kind of video?

@_S7R4N63R 9 ай бұрын

Why are ballast/flatbed trailers in Singapore all tilted like that, higher near the fifth wheel of the tractor but becomes lower towards the rear

@SGHeavyVehicles 9 ай бұрын

Because the suspension height plus height of the fifth wheel of the tractor is higher than the trailer’s suspension 😁 There are some tractors where it’s chassis height is the same height as the fifth wheel, then you wont see this tilting effect