Liebherr R974 Documentary

  Рет қаралды 12,983

PAmining

PAmining

Күн бұрын

Пікірлер: 49
@Oliver66FarmBoy
@Oliver66FarmBoy 3 жыл бұрын
Boy, its been to long since I got my dose of Mine Iron. Been watching some of your older stuff to get me through. lol Im impressed for the size of that machine how much room there is inside the house. Looks like a mechanics dream in there. Also surprised for a German Machine they were running a Cummins. Figured for sure it would be Deutz or M.A.N powered. Hope everything is still going in your neck of the woods. Stay safe man.
@PAmining
@PAmining 3 жыл бұрын
I know the engine house was nice and spacious! The older big Liebherrs opted for Cummins power before many switched to Liebherr engines. Thanks!
@airbats801
@airbats801 3 жыл бұрын
beautiful old machine, thanks for sharing this with us!
@PAmining
@PAmining 3 жыл бұрын
Glad you enjoyed it! Thanks!
@KCIREDERF10
@KCIREDERF10 3 жыл бұрын
You got this one out just in time - Weather has to be bad down by You. Very well put together as always. Thanks for the post Justin. Take care - Fred.
@BeytekinConstructionMachinery
@BeytekinConstructionMachinery 3 жыл бұрын
Thx for that review. It has a very long boom n' stick and a very strange bucket. What did they done there? In that configuration the 974 looks more like an aqua digger.
@theinterestbox8608
@theinterestbox8608 3 жыл бұрын
nice to see another Liebherr on channel especially older one
@PAmining
@PAmining 3 жыл бұрын
Thanks glad you enjoyed it!
@S70AMG
@S70AMG 3 жыл бұрын
I really like them in front shovel config
@MrMan5014
@MrMan5014 Жыл бұрын
I’ve never ran a Liebherr before but I have heard mixed reviews about them…I would love to stack it up against a 245 cat or better yet a 375..I ran lots of 375 Cats and they were extremely good machines!!..
@abdulsingati1511
@abdulsingati1511 3 жыл бұрын
Do you work in the mine that has all of these machines you post? Very informative video, thank you.
@PAmining
@PAmining 3 жыл бұрын
I work for a mine but the equipment I film if from many mines haha. Thank you!
@ivoryjohnson4662
@ivoryjohnson4662 3 жыл бұрын
Always look forward to your excellent videos
@PAmining
@PAmining 3 жыл бұрын
I appreciate it; thank you for the support!
@benzman113
@benzman113 3 жыл бұрын
watch all you videos & must say they are brilliant. what you do is very important for information on the machinery for historic porpoises i really enjoy all keep up the good work it would be nice to know at times how long these machine have been stood, the best one was the Euclid six wheeler super rare truck
@PAmining
@PAmining 3 жыл бұрын
Well thank you! I enjoy making them as much as you enjoy viewing them :) cheers. J
@ΔΗΜΗΤΡΙΟΣΚΑΡΑΝΙΚΟΛΑΣ-σ8ζ
@ΔΗΜΗΤΡΙΟΣΚΑΡΑΝΙΚΟΛΑΣ-σ8ζ 4 ай бұрын
HELLO MY FRIEND GREETINGS FROM GREECE TO AMERICA I HAVE MACHINE AND A LIEBHERR 932 1992 MODEL WITH ROADS I WATCH ALL YOUR VIDEOS I HOPE ONE TIME TO COME TO PENSYLVANIA!
@ChuckWilsonWilsonsStudio
@ChuckWilsonWilsonsStudio 3 жыл бұрын
I like how your feet found those pedals out of habit :)
@PAmining
@PAmining 3 жыл бұрын
Haha well thank you! I've done so mbybif these videos that it's all out of habit anymore
@wesleywright6484
@wesleywright6484 3 жыл бұрын
Thanks! Very interesting! I'm assuming the machines you've shown us are all out of use ! As I find out about these machines! What about the working ones? Would love to see them at work!
@CarlHargreavesRustyRelicsUK
@CarlHargreavesRustyRelicsUK 3 жыл бұрын
my era this 👍🏻
@JHaggis
@JHaggis 3 жыл бұрын
It has seen better days. Very christal view when not windows!
@scotttaylor8498
@scotttaylor8498 3 жыл бұрын
I'm a bricklayer and I find myself on all kinds of construction sites commercial residential doesn't matter either or every once in a while you come across properties that have junk on them but I will say this leihber komatsu caterpillar they are all very reliable tough strong going to get the job done you know you're going to be able to turn that key that things going to start it's going to do what it's supposed to do more than likely and if it's not it's because it's been so neglected and it's still wanted to start every day even though you kept neglected it you finally got to the point where just couldn't do it no more and it took years of you have beaten it and just abusing it for it to finally fail so you really have to abuse those machines and put them through the roughness to get them to fail you just take care of them and do what they're supposed to do they run and they will not stop running
@tonyozimek2116
@tonyozimek2116 3 жыл бұрын
Go you know the history of that machine? Where was it purchased.
@hectortorres352
@hectortorres352 2 жыл бұрын
i like buy one. Any available
@aaronjarvenpa1743
@aaronjarvenpa1743 3 жыл бұрын
That machine looks like it’s been sitting for more than a few years .
@KarelON
@KarelON 3 жыл бұрын
*Nice* 👍👍👍
@scruffy6151
@scruffy6151 3 жыл бұрын
👍👍
@lobostang1
@lobostang1 3 жыл бұрын
Notice the 4x4 in front of the track to stop motion in case it rolls.
@mikeolcott7557
@mikeolcott7557 3 жыл бұрын
I've booked alot of hours on this machine in duluth, mn.
@schneiderexc3557
@schneiderexc3557 3 жыл бұрын
Looks like a sand bucket on this machine, must of originally came from Minnesota?
@scottmellum750
@scottmellum750 3 жыл бұрын
an old barbarossa machine? pretty sure ive run this machine before- she dug sewer /water most of her life
@schneiderexc3557
@schneiderexc3557 3 жыл бұрын
@@scottmellum750 I know a guy that ran this hoe also, I’m, not sure how many they had? I’ve seen a picture of him with a 974 from Barbarossa
@complexgrafix
@complexgrafix 3 жыл бұрын
Start her up
@williammain3247
@williammain3247 2 жыл бұрын
Why would anyone order narrow track shoes? I guess it is cheaper, but do narrow track shoes afford any ability over wide shoes on hard ground? Over the life of the machine it just might work in softer ground.
@jamielacourse7578
@jamielacourse7578 2 жыл бұрын
Nice old gal.
@chejohnny3706
@chejohnny3706 3 жыл бұрын
catwalks sure r narrow. must b pain in weather or repairs
@donmotes5853
@donmotes5853 3 жыл бұрын
Ran one for years it had nice wide catwalks.
@rynobub
@rynobub 3 жыл бұрын
They sure didn't make it easy to get into cab.
@PAmining
@PAmining 3 жыл бұрын
Actually that machine was very easy unlike some designs I've seen. The engine compartment impressed me the most with the amount of space.
Terex | O&K RH120E Documentary
20:00
PAmining
Рет қаралды 21 М.
Happy birthday to you by Secret Vlog
00:12
Secret Vlog
Рет қаралды 6 МЛН
When u fight over the armrest
00:41
Adam W
Рет қаралды 24 МЛН
Human vs Jet Engine
00:19
MrBeast
Рет қаралды 201 МЛН
Demag H185S Documentary
16:30
PAmining
Рет қаралды 4,9 М.
Bucyrus-Erie 480-W Documentary
11:30
PAmining
Рет қаралды 4,9 М.
This Tiny Engine Growls like a Beast (assembly & test run)
12:01
DIY Garage
Рет қаралды 4,2 МЛН
Hitachi UH-801 Documentary
17:00
PAmining
Рет қаралды 4,6 М.
Komatsu-Demag H285S HEAR ME ROAR!!
9:25
PAmining
Рет қаралды 10 М.
Manitowoc 4600 Slinging Boulders
8:00
PAmining
Рет қаралды 9 М.
Happy birthday to you by Secret Vlog
00:12
Secret Vlog
Рет қаралды 6 МЛН