NEW IMPROVED | HINDI | TAPPET ADJUSTMENT | Life of Pal

[@LifeofPal]

Hello my people. Now this is more detail oriented and improved version of before. I know tappet adjustment is complicated and risky and therefore require complete learning to reduce the risk. This will help for sure. Let me know what you think. All the best.

[@nisargpatel2575]

Mene meri fz 25 me notice kiya 5th gear me 87 pe halkasa taping noice start hota he kya is se damage hoga ya jaldi adjust karna padega???

[@LifeofPal]

@@nisargpatel2575 aisa kuch nai hai

[@SwapnilShreya]

Fz25 ka oil pump khrab ho gya, kya kre kahe mil v nhe raha, plz reply

[@shashankdeoghare7625]

Neat n clean content as always., i own fz 25 n feels confident to maintain it by myself because of you. Thank you

[@LifeofPal]

Thank you Shashank

[@pawanvishwakarma371]

Aapke videos ne bahut help ki hai fz25 ko maintain karne me. Thanks a lot for all your helpful fz25 videos.

[@ashishsolanki8726]

sir iss tappet jo apne define kea he vo lajvab he ek detail me knowledge bahut shi di bahut badea sir

[@LifeofPal]

Thank you Ashish

[@vr46_003]

What an awesome video!! Even words fall short to thank you.You really are a true saviour of the fz25 community.👌

[@LifeofPal]

Glad you liked it! Thanks a ton Saswat

[@vr46_003]

Bhai, I just tried adjusting the tappets..But I was unable to adjust the outlet one.. Accessibility was very much restricted. I was having problem in putting the feeler gauge let alone adjust the tappets.Did u also face that issue? Do u recommend any other way to do that?

[@ShashankKR]

Great video. Much more in depth than the previous one. My bike is still having the same problem. Clearances get tightened in just 700-1000kms. After trying many times, finally decided to give it to my mechanic friend. He replaced the tensioner, basically removed and put back the timing chain and adjusted the clearances. The bike was much better, but still not the same as other FZs. Unfortunately due to the pandemic, he had to shut and I couldn't collect my bike and test. Hopefully this issue is fixed, just waiting for the lockdown to end.

[@pratiktandel5706]

You also reported in xbhp right ? I was researching because i wanted to buy one.then I saw your video about the noise. A lot have complained the same. Please suggest me more about this. Is it livable or should i go for another options ?

[@ShashankKR]

@@pratiktandel5706 Hi, my bike has a different problem with the valves. I have uploaded a clip on KZbin comparing the sound of a normal FZ25 - kzbin.info/www/bejne/pZnWlaltq6d1osk. The whole thing with the tappet and coin rattling is exaggerated by most people. People expect something silent like a Honda in this bike, which isn't the case.

[@pratiktandel5706]

@@ShashankKR bro i saw your KZbin video.yes its a bit abnormal. Bdw i decided to buy the bike untill this tappet n coin noises issues filled my mind. How was your experience when u bought the bike ? Did you took proper care of drove it rash ? How are your friends fz25s performing ? Are they having the same issues(unlike yours) ? Any advice you want to give me ?

[@ShashankKR]

@@pratiktandel5706 I maintained it well, until the service centre adjusted my tappets during a service. After that, the bike started to become quite bad. I have ridden 10-15 FZ25s. None of them have the sound like mine. Most of them have minimal sound, are very smooth and accelerate very well unlike mine. Just one advice. Never allow the service centre to touch the tappets. In fact, don't bother about tappets at least for 10000kms. In the initial 4000-5000kms there may be a lot of noise (don't worry about the noise, just keep riding), but once the engine is set (may take around 7000kms), the sound will be minimal. Also, change yamalube every 2500kms. Gurpal has explained about the oil very well in a video, I suggest you watch that as well.

[@pratiktandel5706]

@@ShashankKR i am asking such questions because the prices have gone high up.i have to think before buying. Thanks for sharing valuable information. Do you think its an ideal bike for 60:40 city:touring usage ? Or u have other suggestions for that matter.

[@darreldsouza5200]

Yamaha service centers are very bad in their service, watching your videos gives us all the information, l also own a FZ25 thanks to your videos it's kept in good condition.

[@panky3156]

Nice gurpal... Good to see that u r utilising ur time during this pandemic situation

[@nurvousenergy7268]

Sir ,Inlet 0.07mm & outlet 0.10 mm Kya ye setting fzs v3 bs6 ke liye bhi same hoga ?

[@RidingSoulRV]

You work better than trained Yamaha service center mechanic

[@pratiktandel5706]

Because he owns the bike 😀

[@darreldsouza5200]

Very good video Gurpal, that's a very good thing to improve on your previous video which we teach in management schools double thumbs up for your video keep doing the good work.

[@itsAkshaySingh]

At TDC, tappet were not Loose. First time opened tappet cover since I bought bike. And how you set up exhaust side tappets. There isn't any space. Please reply. Need to set tappets but tappets were not loose.

[@LifeofPal]

I mentioned in the video. It can be BDC bottom dead. Roatate once again full 360 then check if they are loose. Yes gap is less you have to work anyway

[@shaktiprasadmishra1720]

Please help. I got tappet adjusted in this manner in service center but I'm getting coin rattling sound. Previously I was getting a different sound, so went to adjust tappet. What to do?

[@LifeofPal]

I don't know what they did, how they did it. If you think sound will not come thats not the case. Tappet adjustment is not a solution for sound, it is for performance only. If you think there is a issue get it adjusted outside.

[@Rithik_Rajan]

Good work man going to adjust for my fz25

[@LifeofPal]

Thanks man. Let me know.

[@praneet2987]

Very informative.. Keep up🔥 Your hardwork will pay off 🙏🏻

[@motobita]

Very informative Pal. Keep posting good work. 👌👍☺

[@mailvipinck]

When I adjusted to this spec (intake .07 exchaust .10) I had lots of handlebar vibrations at high rpm (above 4k) eventhough the performance is good

[@NoName-yf2cs]

All biker KZbinrs : nothing to do stay home stay safe . Life of pal : Yamaha fz 25 😁😁😁 ki postmartum Yamaha fz 25 : uttahle bhagvan mereko uppar uttahle Baba

[@pulkitrock]

Can explain more about TDC and crank ...what is the need to adjust them?

[@Rac.K1]

Good work and excellent explanation.

[@yogik3890]

You best mechanical man .super

[@dsc9298]

Nice video I am having Gixxer 250 if possible please make video on Gixxer

[@LifeofPal]

Hi, i make video on what i have

[@saiashish8802]

Great bhai. Easy understanding

[@aswanthashok7490]

There's coin rattling sound in my vehicle but the service center guy is saying that the sound is common.. am very confused now. pls help

[@LifeofPal]

Yes its common

[@adityaronanki]

Can u please upload regular bike serive maintanance of every 5000 kms

[@LifeofPal]

Do a service when its required. Wherever the attention is required fix it. Dont wait for 5000 or 10000. That's is company method not applicable for individuals

[@vijayanarunachalam4469]

Bro, can we change Instrument Cluster with r15 or Mt15 ? any idea bro regarding this.

[@LifeofPal]

You will need a r15 or mt15 for few days to check how the cluster is wired and check the orientation. Also need the wiring diagram. Once few whole days are spent on rnd then see if its possible to fit. Then use new connectors which would direct fit the stock wiring harness of fz25. Also figure out how to then bolt the cluster to fz25 using clamp or something. So for this a bike is needed, wiring diagram and an additional cluster which would come with order.

[@dhayatherider438]

Bro, I have doubt, both inlet and outlet adjustment set at the TDC position only

[@LifeofPal]

Yes

[@dhayatherider438]

@@LifeofPal how many km once we adjust it? Sry for too much questions. Because my fz is new one, only driven upto 2k kms. Actually I am character being of "I wish to know about my bike fully".

[@dhayatherider438]

I have more doubts on fog fixing wiring. I also saw your video too. if you don't mind can you give your contact.

[@BengaliTravelerSayan]

Why yamha bike always tappet sound when its set to yamaha recommend clearance pls reply

[@rajeshpaarakkal1390]

Bro....My FZS25 250 cc by bike , After tappet adjusting some burning fog observed on exhaust when bike is on. I am setting intake 0.07 & outlet in 0.10 ...What is the reason.. please reply

[@shivendrapaldabhi7012]

what is symptoms if tappet adjustment required.

[@LifeofPal]

Throttle heavyness, pull power, vibration

[@shivendrapaldabhi7012]

@@LifeofPal tnx

[@vnnavin]

Bro just superb 👌

[@mukeshpatel8616]

Sir Yamaha seuto 125cc ka valve clearance btaye pls sir

[@MOTOGENESIS_IND]

When you put the screwdriver in to check tdc. How do u know? What is supposed to happen. How to know if it's in tdc and how to tell if it's not (other than the loose tappets method)

[@LifeofPal]

Loose tappet method is the perfect one. I put screwdriver to check if piston is at top but this is not reliable as you may touch the open valve and it will feel like piston at top. Another method is to open right side timing chain cover, there will mark given on the sprocket and engine cover, match those and piston is at top.

[@srouth4201]

Hi there, I have bought a new FZS 25 , almost 1100km , milage 42.4 , giving a hisssinggg sound. My local mechanic suggest to adjust engine rocker tapper. What is your opinion. Please guide me. Thanks😊

[@LifeofPal]

Please what this kzbin.info/www/bejne/jWavgXhnjtydZpo

[@srouth4201]

@@LifeofPal thanks bro

[@NileshSomarde-qd1le]

Cone set par video lab ayga

[@RC_BLAZE_46]

Very informative video ❤️

[@LifeofPal]

Thanks Ritabrata

[@rockingroopesh6825]

Sir what is the clearance value for Aprilia sr 150 scotter ,plz do let us know ,no one knows i hve tappet prblm #gurupalsingh🙏💝

[@LifeofPal]

Dont know

[@rockingroopesh6825]

@@LifeofPal how to fix it bro

[@mariyamoptics5991]

High setting se keya hoga sir pls.

[@Sam-to1zg]

Ek No. Video

[@sabyasachichakraborty302]

Tyre pressure kitna rehna chahiye for better performance in fz25

[@LifeofPal]

I keep 25/35. Rear at 28 feel struggle to pull.

[@AmitKumar-nu4rt]

Simple but great

[@HashBrownTravels]

Apnar service center kothay ?

[@vinodveejay]

Thank for the info..great video.. My fz 25 exhaust pipe looks like very rusty..but yours looking better..is any way to clean this rust in exhaust pipe?

[@LifeofPal]

Soap and scrubber works best

[@nisargpatel2575]

@@LifeofPal which soap

[@LifeofPal]

@@nisargpatel2575 any soap

[@sudhirjoshi3115]

Is this problem in every fzs 250 if yes then I am cancelling to buy this bike

[@afraza5946]

No it's not with every bike. Fz 25 is a no nonsense 250cc commuter with understated handsome looks. I got it in 2019. Have zero regrets. If u dont like it, maybe try those bajaj 250cc bikes recently launched

[@sudhirjoshi3115]

@@afraza5946 I searched lot on KZbin all are saying heating issue, engine issue I am confused who is correct.i like bike look.please provide your review on FZS 25 it will helpfull for me

[@afraza5946]

@@sudhirjoshi3115 I would still say buy it eyes closed. No issues in my bike after 2+ yrs. Heating will go away after first service. The engine is a simple no nonsense machine that gives excellent city riding experience. Go for it eyes closed

[@Kratos7686]

Yes it's in all fz25, Fz25 is the least quality bike from Yamaha, assembled the scraps together and named it as Fz25

[@nisargpatel2575]

Mene 14/12/2020 ko hi fz 25 li second hand well maintained

[@sibunathduwara3106]

Kitne me

[@iamharunshaikh]

Mere bike ka tappet sound sirf Morning me aata hai first Start me thodi der k baad tappet ka aawaj nai aata hai

[@jgunmrtummuru6999]

What are the 3 marks on the magnet wheel? Are you sure we need match with the 3 rd mark ?

[@LifeofPal]

Yes third. Another is for timing

[@likecaferacer]

Thanks for precise explanation 👍

[@LifeofPal]

Glad it was helpful!

[@truth4766]

Very informative!

[@AkashDas-sc8vi]

How to identify inlet and outlet

[@LifeofPal]

Throttle body side IN Exhaust Out

[@syedqaiserabbas7319]

Best video ever

[@Anasharvi]

Bhai monocross suspension adjustment ka video bnao

[@nisargpatel2575]

Ha bhai

[@nettooraan9613]

I’m facing this issue on my fz25,2017. But I’m afraid to do this myself. When I went to three different workshops and service center, they said this sound is normal. 😞

[@hashimsaleh2684]

UM commando me tappet clearence kitna rakhna hai bhai ? detail kisi ki paas nahi...

[@LifeofPal]

Service center me ja k unse workshop manual mango aur usme dekho

[@hashimsaleh2684]

@@LifeofPal bhai service center aur show room india me bacha hi kaha hai ? isiliye to aapko puchha...sayad pata ho aapko. service center pe jo kaam karte the wo ab khud ghar se kaam karte hai par luchche log batate nahi hai.

[@prashanthm8895]

Hello Gurpal. Thanks for the very informative video. I am looking for immediate advice from you on the FZ 25 2019 engine noise which I feel very abnormal after using the vehicle for almost 2 years. My vehicle has run 15000 km. I got the vehicle checked at Yamaha authorized service and they say it is normal as they checked at idle condition. This abnormality is after 70 kmph speed.

[@LifeofPal]

It will be there. It is just the way it is with every fz25 kzbin.info/www/bejne/jWavgXhnjtydZpo

[@himanshusingh4092]

Bhi ns 160 dual disc mai ketna clearance rakna hai

[@LifeofPal]

Nahi pata bhai kisi mechanic ko pucho agar online nahi mil rha toh

[@suvobhattacharjee8227]

Superb 👏 👏

[@saketpatil1955]

Very Nice sir

[@muthuandmuthu1]

Hi, Please make video on how to check engin oil level using dip stick. Please let us know how much a dip stick will read for 1450 ml of oil.

[@LifeofPal]

Okay

[@Rajesh-ri8cl]

Hey bro ,Do you know part number of FZS V2 Front fork Cups ?

[@LifeofPal]

No bro

[@insidenil9144]

Good explainer..

[@Anonymous-z4m3l]

Hello sir ! I have Yamaha FZV3 BS6 2023 model bike runned only 4000kms, now I am getting the tick tick sound when bike is in less RPM what to do need to do tappet adjustment ?

[@LifeofPal]

noise will be there. if adjusted properly then ignore

[@technofun80]

​@@LifeofPal can we use inlet:0.07mm and exhaust: 0.10mm in FZ S V3?

[@krishnankarthikeyan6058]

Great work,but I can't do it for ever...poor my fz25

[@TechmartUnboxGaming]

Bohot badiya

[@abhirkonvict1]

What is best setting for no nosie ?

[@LifeofPal]

Keep the engine off.... Basically no setting for it

[@abhirkonvict1]

@@LifeofPal no bro I'm asking seriously i don't want that kit kit noise. 🥲

[@TharunGS]

Hii bro.. After adjusting the tappet clearance the engine vibration decreased and responsiveness increased. But there is a problem!! The ideal speed varies like 500 RPM range even on the move !! So the engine cut off automatically in lower RPM, i can't adjust it with ideal speed adjusting screw which is located in the throatle cable holder. Any solutions ?

[@LifeofPal]

You need to adjust the idle screw on the throttle body not on the throttle cable. Adjust that. Mine fluctuate too now and then. I think its normal. It gets out of adjustment very often.

[@nepalloft2685]

bro i need valve oil seal and tappet nut in nepal here in nepal i caN'T FINd it n my bike is sitting for 5 month in garrage can u help

[@LifeofPal]

Whatsapp me

[@nepalloft2685]

@@LifeofPal whats app number

[@hardikpanchal2324]

My same bike is heating too much which valve may cause this I had adjusted value 3000 kms before and now it is sounding tapet and low pickup & after heat it is not pooling bike on 1500 rpm

[@LifeofPal]

Readjust the tappets there must be some mistake kzbin.info/www/bejne/jWavgXhnjtydZpo

[@hardikpanchal2324]

@@LifeofPal does tapet cause heating issues

[@LifeofPal]

No effect performance

[@abhijeetghadshi4678]

hi bro mere pass bhi Fz 250 hai Uska Bhi typhoid ka hai vah ja raha hai Main Ek Bar service centre Mein pet kiya tha lekin aur successful Nahin Raha to aap mujhe kuchh madad kar sakte hain please reply ?

[@LifeofPal]

Kaisi help chahiye

[@abhijeetghadshi4678]

aap mujhe number send kar sakte hain Taki mein call kar sakta hun ? Pllz

[@hardikpanchal2324]

I have kept that downloaded in youtube

[@jayantahazarika6259]

It it mandatory for adjusting tappet

[@LifeofPal]

Adjust when required

[@jayantahazarika6259]

@@LifeofPal I m asking bcoz I didn't do it with my YAMAHA SZ-R WHICH I BOUGHT In 2012... Is running in perfect condition

[@aaravr7312]

Bhai noise ho toh koi problem hoga kay

[@LifeofPal]

Nahi hoga

[@nathanlopes6377]

Is Michelin pilot street good for fz25?

[@LifeofPal]

I dont have the answer

[@nisargpatel2575]

Mene vohi lagaye he city pro grip best he

[@ans512]

U deserve to be subscribed..... Which I did.

[@nxtbigbuzz]

new improved ? you missed the main precaution this time as well. tappet adjustment MUST be done in cold engine(best left overnight). plus the engine oil grade 15w50 or 10w50 is recommended by motul for fz250. i use 7100 10w50 myself and u will notice reduced tappet noise instantly. i hope you mention these points as well. 👌

[@pratiktandel5706]

I think everyone uses 10w40

[@gopinathkumaran7511]

ASC set exhaust valve to zero gap, Twice…!

[@bennyma4807]

Very good.. Explained every thing. already done this on my FZ150 V3... But not agree with keep more gap than recommended. Thanks

[@LifeofPal]

The gap is within the recommended range. Remember its a range not a fixed parameter.

[@technofun80]

Have u tried 0.07mm as inlet and 0.10mm as exhaust on FZ S V3?

[@RavalMrunalR]

perfect

[@pankajkumarkumar7203]

Inlet outlet

[@pankajkumarkumar7203]

Kay

[@sayedismail5736]

Thanks g

[@hungrybrother6336]

❤❤❤❤❤

[@hungrybrother6336]

I own fz 25

[@amogh5767]

Nice

[@Sehrawat0111]

👍

[@RazVlogsOfficial]

Areh bhai sound atleast sunadeta... clicking sound solve hua ki nahi

[@LifeofPal]

Bola hai video me clicking sound ka solution nai hai

[@RazVlogsOfficial]

@@LifeofPal bhai clicking sound ka issue k baree me kuch solution batado bhai

[@saiashish8802]

Bhai i use 1 rupee coin to open these two crank plastic covers

[@AkshayVarma.]

Yamaha should replace the present FZ 25 rockers arms with the roller bearing rocker arms 😭 waste of money FZ 25 ,4 years saving wasted various idiot noises from engine

[@pulkitrock]

I shifted from R15 to fz25......R15 engine is pretty much awesome when revving..but downside you had to revv it to be fast..... Fz25 in the other hand doesn't need to be revved hard ...you feel good punch after 4k rpm. I rode back to back fz25 and dominor and ktm 390....... you can't compare these with R15 smoothness....so don't expect smoothness ..!!

[@AkshayVarma.]

@@pulkitrock ARE YOU DUMB THATS WHAT IM TELLING IN MY COMMENT THAT YAMAHA SHOULD REPLACE CURRENT ROCKER ARMS WITH BEARING ROCKER ARMS PRESENT IN FZ 150 CC AND R15 MODEL , HEY HAVE YOU SEEN R15 AND FZ 25 ROCKER ARMS , BEARING ROCKERS ARMS GIVES A SMOOTHNESS TO ENGINE.

[@pratiktandel5706]

Yes my friend they needed to.do it but they didnt.arms with roller should work smoothly than this flat type one.

[@dTriX09]

cool

[@sapien9254]

Mary bike may 2nd time Loos ho gai 😭😭😩

[@sapien9254]

Yamaha ki service bohat kharab hai yaar 😭😭😭

[@LifeofPal]

Hahaha

[@sapien9254]

@@LifeofPal bhai ehasaan kar kay voh aisa behave kartay voh 🤦

[@sarthakshrestha2428]

$

[@rajestate4364]

Bhai, mera bike ka servicing plz kar doge❓❓Mera bike bahut jayda kharaab ho gaya hai!! Mere paas bhi Fz25 hai. Plz bro. Just give ur mobile no.