Lifetime 48" Portable Strong Arm Basketball Hoop | Lifetime Assembly Video

[@yohage7454]

Once the assembly is complete, it’s perfect! My only concern is the adjuster the little blue lock thing does not hold firm, I think it may be because it’s lose and might be great once I fix that part.

[@MrD4SAC]

Thank you...Great video, an 11 year old girl followed it and built it without issues; except for that blue grip for the handle. 😅

[@RobynBowie]

Oh my goodness you’ve done an EXCELLENT JOB putting this goal together. The easiest way I’ve seen thank you so much .

[@LifetimeProductsAssembly]

You're welcome! Glad it was helpful!

[@kyoporich]

glad i found this.. all the negative reviews on these hoops were on the assembly and the instructions only being pictures. thanks for putting this out

[@tristantaumua9250]

Do you guys sell nuts and screw separately?

[@sincityquinn]

Had the same issue here. One of the screws in mine is defective.

[@LifetimeProductsAssembly]

If you are missing hardware, please contact our Customer Service Department. Our Customer Service Team can be reached at 800-225-3865 opt. 1 or by email at [e-mail]. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).

[@tewodrosworku6543]

How did you take out the rim from the base?

[@es5891]

The only issue I had was the bolts below the u-bolt the holes where too small and I had to drill them out

[@matthewadamson6231]

Outstanding 🎉

[@LifetimeProductsAssembly]

Thanks 🤗

[@calebgarcia5422]

What is the little blue piece called on 14:02?

[@LifetimeProductsAssembly]

In the instructions, it is referred to as the "plastic locking cam." The 3 letter ID is AQL.

[@aaroncookerly5766]

The right arm in step 2.1 is bent at the bottom and i cant screw it in... ugh.

[@xbrandon.223]

The back part where u can afjust the size of the hoop bent is there any way i can fix it?

[@LifetimeProductsAssembly]

That depends on how bent it is. Give our customer service team a call and we can see if you'll need to replace it or not. They can be reached at 800-225-3865 or by email at [e-mail]. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

[@jarvellwilson7394]

How did you get 4.4 ABS (x1) to fit ??????? Please lol

[@LifetimeProductsAssembly]

The trick is to only finger tighten the hardware connecting the backboard brackets to the backboard in step 3.3, then there is enough wiggle room to get ABS to fit between the brackets. Then in step 4.4, you can tighten that hardware that you left loose.

[@jarvellwilson7394]

I honestly used the other abs it fitted perfectly fine I couldn’t figure that out thank you! The Rim can adjust up and down perfectly

[@asua1977]

I followed every step exactly on the manual but my hoop will not engage the highest position hole to lock in place. Its about a half inch off.

[@ericalawson7247]

The goal will not extend past 9.5ft. Not going all the way to 10ft. What have I done wrong?

[@LifetimeProductsAssembly]

Try reaching out to our customer service experts. They can be reached at 800-225-3865 or by email at [e-mail]. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).

[@carleswalker7843]

Since so many pieces look alike. Maybe the instructor should hold them up visibly for the novice.

[@that_boy_jcobra7337]

it wont stay adjusted on 6.6

[@LifetimeProductsAssembly]

Is the cam lowered to lock the handle in place?

[@ChrisDelChris]

It’s a nice system but for the life of me I have no idea why the fill holes are so incredibly small for something that’s meant to be filled with sand. And of course that’s the part this video just skips.

[@LifetimeProductsAssembly]

We have a separate video for filling the base. Here's the link: kzbin.info/www/bejne/a4O0paSLaKyjhNk

[@ChrisDelChris]

@@LifetimeProductsAssembly yes thanks. I got it done but the holes in my base are smaller than what’s there and if there’s ANY moisture in the sand (which if you’re buying from a hardware store there almost always will be) it makes filling a massive pain. I just got done and it took me as long as building the rest of it. Now I know why so many people cut the hole bigger and buy a new plug.

[@redhoodcars]

Need this

[@Bugs320]

Step 1.2 is a pain I can’t get it to go on

[@beastoftheblocks]

The screw is too long for the top hole…

[@Sheek888]

Had to use a hammer for this

[@Owlsky-dp]

Stupid and complicated design

[@theone4321]

I’m lost

[@mikebrown6292]

ngl this instructor is terrible yall just jump so fast before explaining

[@Idkathings]

Where’s the boh

[@arthurshahverdian5987]

Broken part

[@LifetimeProductsAssembly]

Replacement parts are available and can be ordered through our Customer Service Department. Our Customer Service Team can be reached at 800-225-3865 opt. 1 or by email at [e-mail]. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).