Didn’t even need the paper instructions with this video. Thank you!
@LifetimeProductsAssembly8 ай бұрын
Glad it helped!
@frusciantegeartone2 ай бұрын
I have a wife, 5 kids, own my own business (hair salon), a 2 story home in which I have gutted and remodeled hardwood floors, tile in kitchen and bathrooms, retextured ceilings, repainting, replaced ceiling fans in each room and replaced bathroom vanity lights, as well as a tiled walk in shower with a glass door…. All this to say, this basketball goal was MUCH harder to do than any of those things. And no offense to his instructions, but wow… just wow… Cheers to those of you who actually finished this thing properly 😂 🙏
@ddh199595Ай бұрын
Amen Brotha 🙏🏾 fr 🤣 I said the same exact thing!
@frusciantegeartoneАй бұрын
@@ddh199595 😂
@prokyle117 Жыл бұрын
This video is mostly helpful, but definitely missing some detail. For example the possible use of a rubber mallet to push through the large bolts. They will not go in by hand and not everyone has an impact or drill to use. The book even says rubber mallet.
@juliusmanalo9645 Жыл бұрын
He uses the driver to push those large bolts thru in the video. I thought that was obvious that he couldn't do it by hand.
@aracelisolorzano282610 ай бұрын
You did guided me exactly the way i needed ❤ thanks
@michaelfanara97205 ай бұрын
“Line up this hole with this hole and connect it with this bolt but make sure it lines up with that hole” yea that’s amazing bro thanks. Terrible instructions
@cuteboyed4 ай бұрын
Type shift
@ericksalazar643628 күн бұрын
You just suck at paying attention. There's literally a video for visuals....nerd.
@agreatplace8 ай бұрын
2:20 Previewing the instructions before getting started and I wonder how to decide how tall or short to screw in at this point, there looks to be ~2 inch variance in how long or short you make the connecting poles EDIT : never mind I see at 3:14 to strike the pole to the ground to shorten it :)
@HahaHaha-km4sm4 ай бұрын
Messed up that smaller long bolt and the big bolts but I switch them right and realized I needed my hammer to put the nigglet bolts in 💪🏿 video very helpful
@Maab323 ай бұрын
Same. I did a couple things backwards. Esp with the backboard bracket liner thing.
@MIGUELANGELQUIT4 ай бұрын
It was so useful 10/10
@ericksalazar643628 күн бұрын
I followed these instructions and they were great. However, I am having issues with keeping my rim up, in the 2-months I've had it, the pins have somehow lost their place, making the rim tip over. Any idea what I could have missed?
@LifetimeProductsAssembly27 күн бұрын
Please give our customer service team a call and we can troubleshoot the issue with you and see if we can figure out what is happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).
@awesomejumps9099 Жыл бұрын
Thank you for the video
@MrDane6345 ай бұрын
Step 1 - have tools that you don’t have
@joshuasmith79899 ай бұрын
Can you put a slam it rim on a 46 in lifetime fusion basketball goal?
@LifetimeProductsAssembly9 ай бұрын
Yes, the Slam It rim is compatible with the Fusion backboard. You will need to make sure you get the correct hardware. Both the rim and hardware can be purchased through our Customer Service department. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).
@Iehoopshow5 ай бұрын
Easy to follow instructions. Thank you, bro 🤙
@TheTony0245 ай бұрын
How do I tighten without a power drill? That what is eating into my time
@YourNeighborhoodJackass19175 ай бұрын
Uh, i’d use a torque wrench.
@gabrielstinson7359 ай бұрын
I can't extend my rim up to 10ft. Pretty sure everything is put together correctly.
@LifetimeProductsAssembly9 ай бұрын
Give our customer service team a call and we can trouble shoot the issue with you and see if we can help figure out what's happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).
@henrymillwood3635 Жыл бұрын
You need more detail to this video,I have had to turn around to fix problems because Y’all failed to explain in detail
@juliusmanalo9645 Жыл бұрын
Seems pretty straight forward to me. He even mentions right at the beginning that this video is to supplement the instructions, not replace them. Just bought this. Gonna give it a go this afternoon.
@bigbelafonte823711 ай бұрын
You might need to go back to school my guy…
@suedeB057 ай бұрын
That's weird, nobody else seemed to have any issues. I guess it's you.
@srry7650Ай бұрын
What is the piece on the drill I’m putting one together my drill doesn’t fit any of the bolts
@LifetimeProductsAssemblyАй бұрын
In this video, on the drill we use a socket set, socket adapter, and a Phillips bit.
@srry7650Ай бұрын
@@LifetimeProductsAssembly ok
@srry7650Ай бұрын
@@LifetimeProductsAssembly ok because I bought a drill and some bets none of them is working to tighten everything up so I can connect the hoop ti the backboard
@Slimwasd11 ай бұрын
How do I lift the rim up in height ?
@LifetimeProductsAssembly11 ай бұрын
Check out this video on how to raise and lower a Quick Adjust Basketball System: kzbin.info/www/bejne/fYjcm3SefNd7ZpI
@curatedbyeriq5 ай бұрын
How did you get the backboard bracket to bend like that?
@LifetimeProductsAssembly5 ай бұрын
You'll just need to gently pull outward on the backboard brackets to get them to bend.
@angelastacy364 ай бұрын
Down to the last screw and it wont go through the last hole on the pole. It's like the hole is too small.
@LifetimeProductsAssembly4 ай бұрын
If the screw is not going through the holes, it could be excess powder coating. One thing you could try is using the threads on the bolt to ream out the excess powder coating in the hole. Sometimes the large bolts won't go in by hand and you may need to use a drill to push them in. If you still have troubles after trying both of these suggestions, please contact our Customer Service Department. Our Customer Service Team can be reached at 800-225-3865 opt. 1 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).
@Learsi764 ай бұрын
And the sand how much is good?
@LifetimeProductsAssembly4 ай бұрын
You will need 310 lbs of sand for the base.
@marsinbako84917 ай бұрын
Why this one doesn’t have the springs attached to the rim
@shivamgandhi57797 ай бұрын
Because it’s not a breakaway rim
@_4eva.z10 ай бұрын
How do I adjust the height?
@LifetimeProductsAssembly10 ай бұрын
To Raise the Hoop: • Place the end of a long object, such as a broom handle, under the rim and push upward. To Lower the Hoop: • Place the broom handle behind the backboard and push upward into the release box. Carefully support the weight as you lower the system. Here's a link to a video to show how to adjust the height on a Quick Adjust system: kzbin.info/www/bejne/fYjcm3SefNd7ZpIsi=4YzMhDcQaQTp1u3l
@stacymanos989510 ай бұрын
Need more detail you don't even tell us what package is what
@LifetimeProductsAssembly10 ай бұрын
The assembly video is meant to by used as a companion to the assembly manual and not a direct replacement. We recommend having the assembly manual on hand while building. The assembly manual shows a lot more detail and can show you exactly what hardware is needed for the step.
@eesmith9873 ай бұрын
Way over complicated product…
@iso.azymxc10 ай бұрын
the abp are hard to put in on the last part
@LifetimeProductsAssembly10 ай бұрын
Are you having a hard time getting them on the bolts or with getting the holes to line up?
@user_lrw12247 ай бұрын
Can this hoop go to ten feet because mines feels lower
@LifetimeProductsAssembly7 ай бұрын
Yes it can be adjusted from 8 to 10 feet.
@user_lrw12247 ай бұрын
@@LifetimeProductsAssembly ok thank you
@angelpena73058 ай бұрын
How do you move the back bord down
@LifetimeProductsAssembly8 ай бұрын
Check out this video on how to raise and lower a Quick Adjust Basketball System: kzbin.info/www/bejne/fYjcm3SefNd7ZpI
@sagedropemoff11 ай бұрын
how many holes is 10ft
@LifetimeProductsAssembly11 ай бұрын
10' is the bottom slot on the adjustment latch. The rim would be at 10' when the fully extended.
@jflag19852 ай бұрын
Man slow down
@AmirShearin3 ай бұрын
BRO WHAT. IS THIS THIS DON’T HELP WE WAS CONFUSED AT THE HAVE OF IT IS NOT HELPING NOBODY THIS WAS A WASTE OF TIME
@jahmariwilliams79548 ай бұрын
whats the piece on the drill called
@LifetimeProductsAssembly8 ай бұрын
In this video, we use a socket set and socket adapter on the drill.