LIFT X 33 | A Mathews bow that TUNES ITSELF??? I can get behind this...

Рет қаралды 7,258

Average Jack Archery

Күн бұрын

Пікірлер: 39

@charleszielke2634 2 ай бұрын

Great breakdown on the new limb shift system. Glad to see it on the new bows.

@torreyintahoe 2 ай бұрын

This cam tuning system is awesome. I'm looking hard at upgrading to this bow.

@douglasbarton7440 Ай бұрын

I got to hold them today in at my local shop in Washington State. Very nice. I ordered a Darton 35 ST2 but now I may have to get the Mathews 33 for hunting. Can't go wrong with either bow.

@Terrydewayne-s2f 2 ай бұрын

Thank you PA !

@RodneyRegalbuto 2 ай бұрын

By moving the limb to the right, you’re effectively moving the cam to the left chasing your tear. When you were moving it to the left I was like no no no Lollol

@Gibsonlife573 4 күн бұрын

You know I think my biggest interest on all of the bows is how does it feel when it comes to that Valley does the bow Shake everywhere as you hit the back wall or does it just draw from point A to point B straight back I usually try to set mine up that way I like more of a Target Field in my hunting bows I guess

@Bryan-wc3et 2 ай бұрын

I shoot with anti slip tape on my grip for years. Just a single piece right down the middle of grip. I shoot with a glove on my bow hand year round. That raised part is actually a great idea, my opinion of course.

@ericc1599 2 ай бұрын

I finally upgraded to the Lift this July. This is my 3rd Mathews and might be my last! While I’ve shot it a lot and been hunting with it almost daily there’s issues! First these thin grips are horrible!! My last 2 had the wooden fat grip and fit so perfect with minimal hand torque. This lift will move all over the place with very little hand movement!! Also only had it 4 months and dang camo is wearing off arnd the grip area!! So disappointed in this bow!! For what these cost the paint/finish should last for years!!

@mididoctors 2 ай бұрын

@RodneyRegalbuto 2 ай бұрын

Try a total peep grip. I had the same issue with the stock grip. The total peep grip really changed how I was able to get a repeatable grip.

@jeffreyfred4817 2 ай бұрын

@@RodneyRegalbuto I was going to say the same thing, it’s a game changer for sure

@gynn4622 Ай бұрын

I’ve seen someone online get their riser replaced by Mathew’s for free since their camo started to wear off. Something you might want to look into if your are worried

@josephfolsom2030 2 ай бұрын

From other reviewers, you can leave the cover screws out on adjustment. It is a “dust cover”

@averagejackarchery 2 ай бұрын

Wish I was special enough to get any information ahead of time like they did!

@josephfolsom2030 2 ай бұрын

@@averagejackarchery Well, I can’t help you there

@juliusjames5577 2 ай бұрын

I think your special Jack.

@toddshumaker2715 Ай бұрын

Just to clarify - Mark Hayes said on a recent podcast that the limb technology is the same as the gen 2 limbs on the LIFT they just didn't rebrand them as the ARC 7.

@Scottyman99 Ай бұрын

Being left handed, hardly any bow shops carry bows I want to try out. Is the Lift X the safest gamble for me? Smooth, forgiving and quiet are my priorities w/o giving up too much speed. 28" draw. The 29.5" or 33"?

@dajahvue 2 ай бұрын

I really like that Verde camo reminds me alot of a Chinese dragon skin

@jeffreyfred4817 2 ай бұрын

My brain couldn’t take it I would have to start out with the limb shift marks in the same spot top and bottom 😂

@dbuckner902010 2 ай бұрын

😂😂 I have been watching for a while I never knew your name was Nate I thought it was Jack

@gregsido9235 2 ай бұрын

I would think that nock high tear would be because of the angle that shooting downward would cause! It looks like you are shooting downward at a pretty good angle!🤷‍♂️

@Angel.Custodio 2 ай бұрын

Forgive my newbie question, but could the nock high be affected by the angle of your shot?

@jordanpowell228 2 ай бұрын

Not like your thinking. You'd have to be at an extreme angle to really notice that

@williamcox7190 Ай бұрын

The new color is Shale, not slate.

@gus1881 2 ай бұрын

Is that the Lift XD in the background would love to see a video on this where someone is actually shooting it.

@averagejackarchery 2 ай бұрын

Give me another day to edit it up! Filmed and edited everything yesterday when the bows hit my store. I'm not special enough to get them early like other shops to have content ready the moment the bow launches.

@glovescork-n-animal7012 2 ай бұрын

grey color is called shale not slate on mathews web site..!

@gus1881 2 ай бұрын

@averagejackarchery thanks man! Looking forward to it

@davidknight1973 2 ай бұрын

Should I upgrade I have the lift 33 ???

@michaelvstheworld3680 2 ай бұрын

I would not. It is the same bow minus the limb shift technology. If your bow is tuned good, just stay with it. The Mathews top hat system is rock solid and holds a tune well. The only reason to upgrade is for the limb shift technology, which I am sure is rock solid. So unless you want to play around with a bunch of arrow systems and different weights this off season, just wait one more year.

@Gibsonlife573 4 күн бұрын

I feel like they shouldn't have shaved it out so much I feel like there's going to be a lot of flex in that riser maybe I'm wrong but I just feel like why change it just because people want to go lighter I know they got to follow the damn Trend but that boy being heavy like it was held Like a Rock I've never got along with their cam though the dump into the back wall has never really suited me I know they change their cam up just a little bit I heard

@mussersbowsboatsandscience6610 2 ай бұрын

This is first time realized your name was not Jack 😅

@averagejackarchery 2 ай бұрын

LOL All good!

@charlesbrown9147 2 ай бұрын

You say “massive issue” with limbs ……then continue to say that it was “as big as many made it out to be”…….the biggest Mathews dealers have publicly reaffirmed that it was less that 2-3% of bows sold. What have you seen as far as % of bows affected?

@averagejackarchery 2 ай бұрын

It was close to 7% for me and several other dealers I have spoken to. The biggest issue was when it would happen twice or more to the same customer. That's "the original limb batch was bad" that's a bad engineering designer that continues to fail for a customer.