Lifts & Levels: Chevy Avalanche 2001-2006 Leveling Kit

Subscribe now to stay up to date on all videos coming out from Custom Offsets! : goo.gl/P71pkN
Want this setup?!?!
Parts mentioned in this video can be found at CustomOffsets.com, the links have been provided!
Shop Leveling Kits here!
www.customwheeloffset.com/cus...
Shop Suspension Lifts Here!
www.customwheeloffset.com/cus...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Intro Song:
Flex’d by Handz Onn
therealhandzonn.com
Download now at:
IOS: goo.gl/oPb8of
Android: goo.gl/xQGqay
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[@elmeromero2500]

Awesome video, it shows and you explain the reality of up grading a vehicle, it shows the hassle and extra work it requires to replace aged parts, not like other shows where they tell you what bolts to remove, show the old part on the floor and the new one installed, making the average do-it -yourselfers try it and fail and show up at a professional shop with their vehicle on a flat bed and a box of parts.

[@banga8080]

No eye protection he's gangsta af The Avalanche is my fav truck

[@kevingray5224]

That was a great video. I did my 03 Avalanche and yeah bud-dy those bars were stuck but the air hammer knocked them right out. Good job guys.👍

[@80elko]

I LOVE THESE VIDEOS!!..NOBODY Showing all this work especially this detailed and clear..explained really good too!!!..THANK YOU!!

[@6bolt_Z]

Props for actually showing how much of a pain it can be getting torsion keys and bars apart. Especially up here in Wisconsin, that stuff will NEVER come apart easy. You will be cutting keys off the bars as well as cutting apart the lower control arms to remove the torsion bars if necessary.

[@matthewjensen9550]

That’s a very clean avalanche for a truck in the rust belt

[@happytrails1963]

Thanks for video!, he's done so many those keys practically just fall out now. Would love a 4" lift and 33's but then I can't park in a garage.

[@davidcox1828]

Hey thanks a lot man really been looking at doing this now I can see the difference

[@ethanschulz2067]

I have a 2001 Silverado z71 I am looking into putting a leveling kit on and hopefully fitting 33's on it but I was wondering what you guys do as far as the speedometer and how to adjust it so it is still reading the right speed. Do you happen to have a video on that. Also what has to be done with it as far as an alignment, will it need a new alignment done when I do that.

[@jackqwerty3277]

Well thanks! I understand it now sort of lol!! Hopefully will be doin this to my truck in the future

[@LuisTorres-em9kx]

Great!! Hello excuse me; for the rear suspension, how would the work to lift it be done?

[@jonathanhogan5263]

Realized I was watching so much that I seen an f250 with 14 wides and went damn that's a fat lip 😂😂😂

[@mobilemowers]

What lifted the rear up ?? Nice to see real work torison key removal. Oddly never showed how he got the bar out of the control arms. On my 94 k1500 I had to take the control arms out with the bars, keys and crossmember into the shop for them to heat them up. Took them a while. Just had the trans held up my jack. Soaking them for weeks with pb blaster and hammering them back and forth weeks at time while in the air never helped one bit.

[@m.7n6]

I like leveling kits, it's perfect it just levels your Front with your rear.

[@JohnnyChingasloco]

nice video it's hard to find videos that show 2002 2005 torsion key install on avalanches I purchased Pro Comp torsion keys and the shocks to go with it and I'm very disappointed that there's still a rake on my truck like I never installed anything but I saw your video that you put a longer bolts I had to use the OEM and I think it's bottoming out do you guys sell the extended bolts thanks

[@carpet180]

Thanks for sharing. Waiting patiently for that ram 2500 video .

[@carpet180]

Custom Offsets Sweet sweet sweet . Thanks

[@northwestsuburbs20]

How are you going about correcting front CV axle angle. My boot keeps leaking on front axles replaced them once already

[@Jason-ul1so]

Do the offset make that much difference my 02 has same size tire not leveled but factory 20s with 0 offset

[@getpeko54]

A 2 1/2" lift brought it level? On my 04 Avalanche the rear bumper is 8 1/2 in. higher than the front one. It's all stock as far as I know but the rear coil springs appear new. Any idea of the rake on your project before leveling kit install? Can you recommend a leveling kit for me?

[@Victorychamp2817]

Can you please do a tire wheel setup on a 20x12 -44 wheel on a 33/12.50

[@user-sn5on4dv3h]

I just did one of these and the crossmember looks like it’s at a crazy angle now. I don’t know if the bushings are work or what? Is it normal for it to flex a lot?

[@carolinacollector3513]

Thanks man cause some days i will hear it and others nothing just bugging me cause i cant figure it out

[@blasaviles5337]

When you installed the level kit you have to redo it alignment?

[@CustomOffsetsTV]

Anything steering/suspension related you do!

[@cooterbrown7681]

Is that a 24in rim???

[@DeereBoy95]

can you do one for a 35x12.5 on a silverado 2500 99-07?

[@jasongraves9581]

Doesn't it damage the cv axles if the factory ones are turned all the way up and you didn't mention you have a alignment it changes the camber

[@faintestlemon1]

I have a 2003 Avalanche 1500 with a lift on it. I think the lift is 4 or 5 inches but not sure because I bought it used and the dealer wasn't sure. How can I find out how high the lift is? I need new shocks

[@faintestlemon1]

Custom Offsets Cool thank you!

[@johnpiunno2008]

would like to do this my 03 avalanche do you have to do any with the rear coils, the truck was lowered but do not know what size coils were put on what do you recommend i replace them with

[@CustomOffsetsTV]

Its a stock coil, leveling kit just brings the front up to match the rear!

[@chrislo914]

I have a 05 avalanche and got that same look just by tightening the factory keys on the bottom

[@Trd2020]

Riced Civics is that safe?

[@chrislo914]

avalanche I’ve did it 10 months ago and it hasn’t given me any problems what so ever.

[@lezlethal]

I cranked out my factory 04 keys and I did notice a difference in the ride quality. I brought them down a bit and it felt much better. I'm thinking of getting some new keys for a little more height.

[@kevingray5224]

Yeah don't crank the factory keys as they aren't meant to be pushed. You'll only cause fatigue on your torsion bars and end up replacing them down the road.

[@osmanvasquez11]

Did you have to cut out the stops to prevent the upper control arm from bottoming out? Local shop in Houston has recommended cutting those off the frame just wanted to see if anyone had come across that suggestion.

[@CustomOffsetsTV]

Kits call for different things Osman, best bet is to go off the lift kit instructions

[@jacobn3160]

Osman Vasquez yeah cut em, you'll have a better ride and can crank them more

[@michaelbauerle9182]

Yes go a head and cut them and then you will buy ball joints ore often. You never fully crank torsion bars

[@Trd2020]

Will that eat up your cv axles?

[@user-zf2jm8uk1x]

How far do you need to put those bolts back in the support bracket? I saw he undid the clamp and it came down. But then he ran the key back up with that bolt. Do you just run the bolt till you can’t go any further?

[@CustomOffsetsTV]

That bolt is height adjustment. Typically run it 1/2 - 3/4 of the way in but total depends on what height is needed to level the vehicle. -Banker

[@user-zf2jm8uk1x]

Custom Offsets I gotcha! Thanks for the info!

[@randyvallejo4377]

can you do a lifts on an obs ford?

[@80KG_Costco_Chicken]

That is way difficult than I thought lol. I just gave up this project.

[@miguell101010]

I have a 2002 avalanche and I want to do the same thing you just did to this truck how can I contact to you guys

[@CustomOffsetsTV]

Shoot us an email to [e-mail]!

[@Ramonmendez56]

Can you do the lift with the stock keys if there still in good condition? If yes what are some cons on doing a lift like this ?

[@CustomOffsetsTV]

We recommend replacing the keys if the kit you get comes with aftermarket keys.

[@AlexRuiz-cu1rx]

wht size wheel and tires are those

[@bobbybennett1572]

What's your guys opinion on supreme suspensions? I

[@ButterNoToast]

My keys came off like nothing. I live in Florida so no rust! Not even stuck lol. Yay

[@KaneTownBeats]

how many inches is this. 6 or 4?

[@aj2vic1]

What's the size on those tires and rims?

[@jaysantiago4074]

What lip is that on the front bumper?

[@charlyzahn5963]

Hi I have 2005 Chevy avalanche Z. I am saving money for the pro ryde leveling kit. But i love the look of those tires and wheels on the video. Could you tell me make and size of the exact wheels and tires on the video?

[@CustomOffsetsTV]

Those are Fuel Maverick wheels wrapped in a Toyo Open country M/T tire! Check out this setup here: www.customwheeloffset.com/buy-wheel-offset2/D61020009847/360670/fuel-maverick-black-milled-20x10-18-toyo-open-country-mt-lt275-55r20

[@charlyzahn5963]

Thanks. Love this look. My avalanche is black too. Well I am going to have to start working OT or get a second job. LOL

[@markrmgliberia4548]

the front lift 2.5 in and the back is stock? correct?

[@xssgt]

I have a 02 Av 220000 mi, I have 1 1/2" Chevy sag on the left rear, shocks aren't that old and thinking about putting in a 1 1/2" spacer for the leak before leveling the front. is this fine to do.

[@CustomOffsetsTV]

That should be fine for a temporary fix

[@caseysherrill7282]

Quick question the kit I found has 2” cups for back and 3 in keys would that level my 02 avalanche?

[@CustomOffsetsTV]

Casey, please send an email to [e-mail] and they should be able to let you know what would work best for your 02 Avalanche!

[@jesusvasquez7432]

Don’t put the cups on the back I did and had to take them of to level again smh

[@zeefranx4509]

which leveling kit is this? i need one for my avy

[@theflyestfella9832]

Just got 2005 I wanna do the same

[@jayejaye9760]

I'm buying an 02 avalanche for cheap and I wanna level it. Can yall advise me on what to do? And what type of tires/wheels will work?

[@CustomOffsetsTV]

Check our gallery out for fitment help Joe- customoffsets.com/gallery And our leveling kits here- bit.ly/2rWP3Uo

[@jayejaye9760]

@@CustomOffsetsTV I want this setup exactly. I'll check out the gallery too though

[@Fasteddiesinhomerepair]

thank you

[@mendozahugoalberto]

Would these keys also apply to an Escalade Ext or what are some options for leveling the Escalade??

[@kcroc44]

HUGO ALBERTO MENDOZA should be exact same year for year

[@4paulseyes]

Yes. Go to Pro Ryde's page for fitment. I just purchased the key set for my 04 Avalanche and the Escalade is in the spec too.

[@LandoSEA33]

What wheels are those?

[@ramrodforlife8943]

Ok I have a 04 avalanche z71 w/o cladding. What I’m wanting to do is put 3” rough country leveling kit with hostile switch blade 20x12 -44 undecided on what tire I want to go with but most definitely 33x12.50 is this possible? How much cutting? Full not cal mod? What am I going to have to do? Need advice!!

[@CustomOffsetsTV]

Check out our gallery for a ton of information and pictures/ knowledge! bit.ly/2DgLW0N

[@jacobn3160]

RAMROD FORLIFE trim bumper (Plastic and some metal) and NorCal

[@hectorpaz4701]

looking for a nice wheel set up for a 10 tahoe z71 with level kit

[@hectorpaz4701]

can you recommend a set

[@franciscorodriguez6024]

What's the name of the color of the truck

[@jerrylittle2726]

I got 03 need it to go way lower

[@arod21194]

What size are those wheel and tires ?

[@CustomOffsetsTV]

20x10s on 275/55R20! Check them out here! bit.ly/2YSnda8

[@JoseLuisGarcia-cq1by]

where i can't buy your hat?

[@zachary666655]

I have 275/60/20r Cooper discoverer on a stock 03 avalanche

[@josephanderson3551]

Yuck

[@germandeltoro1839]

How much is that part on average

[@CustomOffsetsTV]

Check out this leveling kit here! www.customwheeloffset.com/store/347/proryde-chevrolet-gm-1-2-ton-ld-1988-2006-6-lug-duck-head-torsion-key-leveling-systems?year=2004&make=Chevrolet&model=Avalanche

[@pearldadon6068]

How can you lift it more ?

[@CustomOffsetsTV]

You could get a body lift!

[@CobHes]

I like but too much wheel not enough tire for me but looks good

[@nicholasruiz4464]

what the heck does a torsion key do?

[@nicholasruiz4464]

this is completely new to me lol had to go find out more. My f-250 had a twin I beam front suspension, my expedition is IFS with no torsion bars or keys, but I peaked under the tahoe I just bought 3 weeks ago and there they are

[@BigDaddy-is4iv]

Shop wants to charge me $897 dollars to level my 04 avalanche i is that a fair price or nah??

[@RG-sk5en]

Mighy as well buy a lift kit

[@Trd2020]

Great video

[@crazyantny9161]

Biggest tires that I've been able to get away with. And no trimming are a 33×11.5.Not with inset wheels

[@crazyantny9161]

Just to elaborate, thats pretty much the best fit according to most of the guys selling 3 inch kits. That or about a 290/70 give or take. One nice thing about you tube is we get to share. I learned a trick by notching those dam pesky keys. They call my the guy who tough MacGyver and couldnt come up wit the hack

[@jasonmarquez5953]

What size rims

[@CustomOffsetsTV]

20x10s on 275/55R20! Check them out here! bit.ly/2YSnda8

[@burntsilverado]

How's the alignment after that?

[@CustomOffsetsTV]

You should always get an alignment after installing new suspension

[@andrewwoodall9119]

Where is the shop located

[@CustomOffsetsTV]

We are located in Appleton WI! 🤘

[@andrewwoodall9119]

@@CustomOffsetsTV long drive but will be worth it

[@jburk21]

so 20x9 +0 with 275/55/20 should fit OK on leveled 03 z71 avalanche with little to no trimming?

[@chrisquas4113]

John Burk I have 275/55/20 on my stock suspension 2005 avalanche

[@kcroc44]

Have you ever run into the issue of the control arm bottoming out with a torsion lift of any of the avalanches

[@codybersicc7939]

*is he really wearing nike shox lmao*

[@bigchungus7720]

That new intro tho 👍🙂

[@Rockdaground]

Is 275 tires ok to run on 10 inch wheels? Is the wheel sticking out past the tire much? Asking because I'm looking on the manufacturer website and it says up to 9.5 wide wheels.

[@carolinacollector3513]

Got a 03 avalanche and hearing a clunking sound ever so often 6 inch lift think i may be the shocks going out

[@enjoylife7030]

Check the end links on your front sway bar. One of them may be loose.

[@tupapi818247]

This is BS . You don’t need a leveling kit to fit 275-55-20 . Stock is fine! I have an 02 tahoe sitting on 20X10 wheels wrapped in 275-60-20’s! And all I did was trim the front inner well .

[@jasonrogers143]

Enjoy crap in your eyes? Put on some glasses dah

[@twc20031985]

5 years ago we leveled them, now we are surrounded by Super Squatters with open headers and cb antennas with no CB.

[@user-sn5on4dv3h]

I just did one of these and the crossmember looks like it’s at a crazy angle now. I don’t know if the bushings are work or what? Is it normal for it to flex a lot?