Next time you’re trying to run wire thru the firewall. Tape the wire to a coat hanger. It’ll be stiff enough to push thru that rubber hole for the manual clutch pedal. And it’s easier to grab and pull from the other side as well. And it allows you to run wire fairly efficiently thru the dash to the switch mounting spots.
@markc62076 жыл бұрын
for safety reasons she should be wearing a bikini. loose clothing could get snagged on things.
@liogonzalez88136 жыл бұрын
Very good point! Safety first always.👍😂
@ryswyk58945 жыл бұрын
Fucking creep.
@arielgladd20465 жыл бұрын
Creep
@roderickclerk59044 жыл бұрын
@@ryswyk5894 simp
@jeremy7825 жыл бұрын
The "Howling" fins are for cooling knucklehead, thats how heat dissipates from the heat source, i.e. The light, way to ruin it. Kinda like putting HUMMER on a jeep hood.
@FreedomCrawler5 жыл бұрын
Yes we know they are. This didn’t effect the cooling at all. Works just fine and is quiet. Hummer on a Jeep hood just bothers the people who take it to seriously lol
@jeremy7825 жыл бұрын
@@FreedomCrawler So I think as a white male U should get a Black Pride tattoo... Ya know, just ta see. Lol
@FreedomCrawler5 жыл бұрын
Lol I’m not much of a tattoo guy but my friends would appreciate the hell out of that
@jeremy7825 жыл бұрын
@@FreedomCrawler rawk on man!
@CRAWLTV8 жыл бұрын
Hey guys! Always love to see another Jeep couple getting involved together! My husband and I have been building Jeeps (XJ, JK now JKU) for a few years and it's amazing to have your best friend also interested in your favorite hobbies! If you guys plan on continuing to add lights (KC, more light bars) or other electrical components, I'd suggest investing in an S-Pod. We'll be doing a build-it-yourself video of one here soon, but it really cleans up the interior of that "3.6L V8 Diesel Supercharged" (LOL! too funny) area beneath the hood and waterproofs all of your circuits and connections if y'all do take that rig offroad. Keep On Jeepin' On, friends!
@FreedomCrawler8 жыл бұрын
We really appreciate that. Our Hybrid doesn't make much power but we do what we can. lol. We are definitely going to spend some time surfing your channel now. Have a great weekend!
@你們是-w7p6 жыл бұрын
Jeep_ Noob if it was rude im soooo sorry
@JaxWatchesandEDC8 жыл бұрын
The only thing I would have changed is, I would have put heat shrink on those connections behind the a pillar mount.
@Manny922848 жыл бұрын
Great install video! I wouldn't recommend putting anything in between the fins on the light. They are used to dissipate heat created by the light when turned on. Unless you are not planning to use it and just have it for looks. Again thanks for the video.
@jeffgodsey28752 жыл бұрын
my kit came with longer bolts for the bar using factory bolts was not enough threads to hold them on
@brianbridges64677 жыл бұрын
Can I get a thumbs up from any 80s babies who were diggin' the nostalgic playlist in the background? I swear I was instantly taken back to high school with all the great music playing in the background! A time when life was much more simple and all your problems could be fixed by staring at a lake. le sigh
@FreedomCrawler7 жыл бұрын
+Brian Bridges you already know it! Life was so easy in high school lol
@awdsie99027 жыл бұрын
You can hide the wires with the existing plastic tube, the one you zip tied it to,that thing opens up, you will find more wires inside it. You could also but a smaller tube and put the wires in that and zip tie it like you have it, just to make it look better and cleaner, but you guys did great!
@FreedomCrawler7 жыл бұрын
+Awdsie thank you, we cleaned it up more later but just wanted to use this as a basic reference. We obviously mix humor with seriousness in hopes that most people understand he differences lol thanks for replying and have a great week
@skulledmonte848 жыл бұрын
i only click on the video to see the "thumb nail" heck with the light bar :)
@3AcesFilms8 жыл бұрын
those fins on the back of the light bar are heat sinks... basically to help dissipate heat when it gets hot. Isn't covering them with window seal or whatever a bad idea? Good informative video though. Thumbs up PS: and yes i also thought the hummer sticker was wack...before I read about the parody videos. Keep it up.
@garrisonaw7 жыл бұрын
I was going to say the same thing about the fins. Packing insulation between them totally defeats their purpose. You say you're doing it because of the noise, but then you have big mudder tires on the Jeep that make more noise than the light bar would.
@suburbanhobbyist27527 жыл бұрын
Agreed, the fins are there for a reason. Light bars with the massive amount of LEDS, especially cheap ones like this, create a lot of heat and need to dissipate that heat or from what I've read, it will severely shorten the lifespan of the LEDs.
@shark_zombie Жыл бұрын
When you are adding anything to a vehicles power supply always + positive first then negative. when taking something off always take the - negative off first then the positive. It's like adding + first and subtracting - first . Hope that helps so you don't get hurt or burn your system up or mess something up.
@FreedomCrawler Жыл бұрын
^ good advice.
@ceaser41065 жыл бұрын
'The jeeps a looker but the view ain't bad.' Lol agreed.
@FreedomCrawler5 жыл бұрын
Lol you feel me
@ceaser41065 жыл бұрын
@@FreedomCrawler 😂😂😂
@marklafollett62663 жыл бұрын
I think it’s awesome that you so much together and it looks great.
@FreedomCrawler3 жыл бұрын
Thanks, we have a good time
@weyrunner28387 жыл бұрын
Great vid. I like your "Hummer" decals, what a joke! I had a hummer H-2 for 5 years. I sold it to buy my JK Unlimited! I fell back in love with Jeep when they came out with the unlimited 4 door with sick insulated roll bar with speakers and unlike the H-2, I could take the top-off! I'm still tricking it out and taking the top off................
@FreedomCrawler7 жыл бұрын
Thank you for understanding the humor behind them lol. HUMMERs are great rigs also but Jeeps are just so much easier to work with when it comes to aftermarket support. Sounds like you have a sweet setup going on.
@Pincheemoska4 жыл бұрын
I need more Jeep girl and whatever she was installing
@FreedomCrawler4 жыл бұрын
You’re telling me lol
@dillonwells56498 жыл бұрын
we all know why we clicked on this video lol
@robertallen56868 жыл бұрын
duh..
@nickc88197 жыл бұрын
Duh, Light Bar for vehicle
@brewse647 жыл бұрын
yeeeeeeup
@daviddowling98307 жыл бұрын
Hoping for a tank top,no bra.
@daviddowling98307 жыл бұрын
What's with the hummer decal unless it refers to her
@Se7vinDeadlySins7 жыл бұрын
Pretty good video, I would liked to have seen what you did to the back of the light bar and the new switch.
@FreedomCrawler7 жыл бұрын
+Se7vinDeadlySins we go over a bit more detail in our how to get rid of Lightbar wind noise. Much improved over what I mentioned here
@Se7vinDeadlySins7 жыл бұрын
Jeep_ Noob thanks. I will check that out.
@rceETR8 жыл бұрын
nice video.... I just ordered my 30" light bar for my hood. I have no use for a 50" living in NY so i went with the 30" witch is 1/3 of the price and just as much fun. who knows maybe ill still add the 50". As for your stickers getting stolen i use to live in TX what i use to do was take a razor blade and cut them once placed where i wanted them. No one will notice it and if some one decides to take it well then they can have pieces of the sticker.
@jaysonm.36607 жыл бұрын
Not sure if you've found this out since this video, but you should move the wire connections to one of the other terminals on the battery. The one you hooked it to has a special nut on it that is rounded on the bottom and is used to tension the battery cable clamp. Becaues of this, I ran into an issue where my clamp wouldn't tighten fully and the cable worked its way off the terminal over the period of about 18 months. On the positive side, you have 3 terminals that you can use. On the negative side, you have a stud but no nut so you'll have to get a nut that works.
@lennymartelli515010 ай бұрын
Exactly!
@appstate19967 жыл бұрын
That looks like the Yitomotor light bar I just received. I'm on here because there was NO INSTRUCTIONS! This video was real helpful. I would have liked to see more detail of the actual install and tightening of the light bar to the mount. On mine there is a gap between the mounts and the bar. I dont know if I've left something off the end of the bar or what? its a 52" bar but there is about 2" of gap. Also, I would really had liked to see where the switch wire was run through the firewall after you had it installed. I couldn't see where you were showing from inside the engine bay and I cant see where to run the wire on mine either. Overall, this is a helpful video! Jeep girl is very cute and seems very sweet. Treat her right !
@FreedomCrawler7 жыл бұрын
+Pete Minter I really appreciate that. If you can send me a picture of the gap you're referring to on Instagram. Search for: Jeep_Noob We ran it through a rubber grommet plug near the gas pedal. You have to punch a hole in it. If you pull the carpet back a bit from the gas/brake pedal area you should see a black rubber plug that can be used to drain water that I'm referring to.
@MFG7628 жыл бұрын
She did that and didnt even break a nail. LEVEL: MASTER... COMPLETE.
@FreedomCrawler8 жыл бұрын
+MFG762 Shes got some serious skills. Lol
@coryh61258 жыл бұрын
I love that Dashboard is playing in the background!!
@coryh61258 жыл бұрын
oops I mean Secondhand Serenade! my bad couldn't really hear it over the dude talking
@FreedomCrawler8 жыл бұрын
+Cory Henrickson lol we try and find a happy median between background music and talking but its difficult. the music is often more entertaining. lol
@JB-kf3yb8 жыл бұрын
Thanks for the video guys. I plan to do the same with mine soon.
@FreedomCrawler8 жыл бұрын
+Jon B I appreciate that. Easy installation for sure
@tedwoe7 жыл бұрын
"The Jeeps a looker, but the view ain't bad!" LOL
@FreedomCrawler7 жыл бұрын
+tedwoe You get it. Lol
@rjdatdude238 жыл бұрын
nice jeep bro. also its your jeep so if you want hummer stickers on it have keep em on and don't stress over the negative comments
@ryanimboden53327 жыл бұрын
Light bar looks great! I love that you guys get down to Tom Delonge. Nobody where I live really seems to get it.. Unless you were just listening to random shuffle on Pandora and have no idea what Im talking about :p looking to install a light bar of my own in the not so distant future. Take care there.
@FreedomCrawler7 жыл бұрын
+ryan imboden you already know! lol I appreciate the reply.
@joewilkerson34446 жыл бұрын
Way to go girl. You did great.
@MR707263 жыл бұрын
You sure she didn't just over tighten that Bolt with the drill
@mck31316 жыл бұрын
how has the bar held up since install? have you had any electric issues?
@rodriguezalbert55ar8 жыл бұрын
a girl that can actually turn a rachet properly and not look like a 5 yr old doing it is awesome
@FreedomCrawler8 жыл бұрын
+arod55 Agreed.
@Mike_hocksbig696 жыл бұрын
She can't do shit.. that dude is mansplaining everything to her.. She's literally only doing it for the views.
@MicahMcdowellSRT6 жыл бұрын
She is turning the ratchet like a 5 yr old. There’s also no need for that extension on the ratchet. Also she only needs to break those screw loose and they’ll come out by hand the rest of the way
@kipper70595 жыл бұрын
@@Mike_hocksbig69 ...As she hits the "Wrangler/Hummer" with the ratchet and scratches the paint.
@bashman378 жыл бұрын
Hey guys/gals, Thank you for the great in depth vid tutorial. Seriously it's probably the best vid I've seen as of 72116, and I've watched a bunch. Great job. As for the haters, forget about em. They just slam other people because it makes them feel better about their pathetic worthless lives. Oh yeah, i was going to ask Jeep girl how many scratches she has aquired on the face of her watch? Get Your Mod On!
@FreedomCrawler8 жыл бұрын
Thank you so much Jeff. She said 2! lol.
@thewhitebatman46358 жыл бұрын
5:15 IM DONE I was laughing so hard when she agreed with the Diesel Hybrid V8
@FreedomCrawler8 жыл бұрын
Lol we try and add as much humor as we can in. Have you checked out the parodys?
@thewhitebatman46358 жыл бұрын
I've seen the dangerous Jeep one, I just turned 16 and got a 2004 TJ, so I was looking for an install vid on a $80 LIght Bar... Keep up the good work!
@FreedomCrawler8 жыл бұрын
+The White Batman Thank you. Great pick, those TJ's are awesome to build
@josephtyburski94227 жыл бұрын
I like the freedom crawlers decal
@FreedomCrawler7 жыл бұрын
Joseph Tyburski thank you, that's our jeep club
@josephtyburski94227 жыл бұрын
Jeep_ Noob yeah I kinda figured....great name for a jeep club
@robertcecil68804 жыл бұрын
Thank you guys, especially once again the “Jeep Girl” for the really very good and informative installation video👍🏻❗️ Oh, and by the was in spite of the fact that I surely am old enough to be your Grandpa, you are as cute as a button and you sincerely do Add a lot to an otherwise sorta dull topic🥴👍🏻. Post Script...I did have a couple of questions pondered which you nicely answered, so my appreciative statements are not to be mistaken As light.
@JMAKUS5 жыл бұрын
Just subscribed to you guys!!!! And yall from texas too!!! Great.. im in the clear lake area... houston!! Im gonna do the light bar as well.. just got my 1st jeep in april.... its completely stock...sucks but ok.. love my jeep.. what size lift do you have!???
@FreedomCrawler5 жыл бұрын
Thanks for touching base and subscribing! We do 3.5” lifts on our JKU’s starting a new build right now actually in our most recent videos
@FreedomCrawler5 жыл бұрын
Stock will get you all over the place too. We will be doing a few stock runs to help show that to people
@thesentinel89747 жыл бұрын
You made a nice video. Pretty informative
@FreedomCrawler7 жыл бұрын
+James Lonergan we really appreciate that. It's not all perfect. We get that, just trying to help out and add a bit of humor. I hope you have a great weekend
@thesentinel89747 жыл бұрын
Thank You, keep on doing your videos, very enjoyable. You both the type of special people I hope to meet along life's trails.
@Phat_Panda-uq7yq8 жыл бұрын
Why in the hell would u put a hummer sticker on a jeep. Hummer impersonator
@FreedomCrawler8 жыл бұрын
Welcome to the channel. take a look around and watch our parody videos. It'll all make sense. especially in our channel description
@FreedomCrawler8 жыл бұрын
+deebo gotyou No, that's just an ignorant comment
@chazzcrowchild67268 жыл бұрын
that poor jeep you don't do that to a jeep what did it ever do to them for it to deserve such insanity 😢
@Phat_Panda-uq7yq8 жыл бұрын
+randy miller I do have a hummer
@cumminsdiesel53798 жыл бұрын
Brandon Castor hummers suck
@joshuasweeney78632 жыл бұрын
So... if you're looking at a used JK, and it already has one of these monstrosities on it, how bad is the windshield frame and hinge going to be if you try to remove it?
@FreedomCrawler2 жыл бұрын
Should be totally fine
@67wildwolf8 жыл бұрын
go online and look up anti theft bolts. Then replace the mounting bolts with them. also just get wheel locks for your wheels. Replace one lug nut and your good. make sure you put one on your spare as well. If it takes too much time the bad guys are interested. Nice install and thanks for the laughs.
@FreedomCrawler8 жыл бұрын
We are running them on the wheels. I was actually going to put that or tack weld the bolt up top on
@67wildwolf8 жыл бұрын
factor 55 has them for winches they might for light bars too.
@TwistedMetalsOfTexas4 жыл бұрын
nicely done and good info thanks
@FreedomCrawler4 жыл бұрын
Thank you and thanks for watching
@deerhunter720026 жыл бұрын
I tried to use stuff from another video to quiet the sound but it didnt work. Where did u get yours?
@FreedomCrawler6 жыл бұрын
Was it our video? We posted a video on how to keep it quiet with door trim
@jaysteinfort17 жыл бұрын
Interesting. I'm pretty sure that those terminals got hooked up on the clamping nut for the battery terminal clamp. I see electrical problems in thier future as the clamp is no longer tightening to the battery post.
@FreedomCrawler7 жыл бұрын
+Jay Steinfort I tightened them all the way down. Been good to go ever since. There's other options and I've used them in a couple different locations. Whatever works best for you is the best route for sure
@ratrodramblin6 жыл бұрын
Did a great job... Wait this was a install video? No...have to watch it again.
@FreedomCrawler6 жыл бұрын
I feel that
@jryser286 жыл бұрын
Hey guy's. I got the same light bar and I would like to change the switch. Have you changed yours and how did you do it? I noticed the switch has electronics inside of it.
@FreedomCrawler6 жыл бұрын
Yes, we usually just cut off the switch and then wire it up into a flip switch or a pod switch. Haven’t had an issue with them. Worst case cut yours off with some room on each end so if you need to reattach it you can.
@jryser286 жыл бұрын
Thank You I will sure give it a try
@ryanbarry76678 жыл бұрын
Thus video made it seem so simple. Good job man👍🏻
@FreedomCrawler8 жыл бұрын
+ryan barry Thank you Ryan. Just want to help out where we can.
@krisgomez31558 жыл бұрын
thanks for the vid!!! got a off topic question, what brand are those Fender Flares? They look nice!
@FreedomCrawler7 жыл бұрын
+Kris Gomez We cut them ourselves. We have a fender trim how to video also
@akorn467 жыл бұрын
Great video.
@FreedomCrawler7 жыл бұрын
+Andrew Cooke thank you
@jacoblichtenwalter79637 жыл бұрын
My jeep is making a weird noise after installing this light bar, it sounds like a whirling fan whenever i accelerat, any tips?
@FreedomCrawler7 жыл бұрын
+Jacob Lichtenwalter yepp, I actually made a video on how to help that out a lot. You just need some door trim
@annelopez72448 жыл бұрын
the light bar looks amazing on the jeep! but it looks kinda hard to install it when jeep girl was doing it
@FreedomCrawler8 жыл бұрын
Its really not that bad. You delete all the filming and instruction and its pretty quick and easy
@annelopez72448 жыл бұрын
Lol well if you say so
@Masteririsheagle8 жыл бұрын
i don't know much about light bars but i do know a little about installation mechanics. that wire harness that you were putting through the firewall but the brake booster should have been but UNDER the washer fluid hose and not OVER it. lol i bet you fixed that after you realized what would happen when you tighted down the wire harness.
@robjames88847 жыл бұрын
Wrong negative bolt. That one is a conical shape to tighten the cable to the battery. Hope you fixed this and used the stud next to that one. You just have to find a nut to fit cause Jeep was cheap and didn't give us one from the factory. Other than that great video girl! Keep on Jeepin.
@danaplaza17 жыл бұрын
That was helpful, thanks for sharing.
@123willy10007 жыл бұрын
WHY IS HE WINNING, she did the work,,,, she did a dern good job too !!!!!
@FreedomCrawler7 жыл бұрын
+123willy1000 I always win lol ......don't tell her that.
@mully9295187 жыл бұрын
Where did you get that freedom crawlers decal i love that
@FreedomCrawler7 жыл бұрын
+mully929518 thank you, that's our off-roading club
@DarthJeep6 жыл бұрын
I agree. I have no need for a "bullet proof" or "Sharknado prroof" light bar. I got a cheap one that works when I need it to and I'm not going to wince if a tree branch hits it ( a rock already did and it works fine). Nobody's looking to steal it either >BONUS!
@taktakmo35567 жыл бұрын
Can I ask what came with the light bar? The the harness and brackets come with it?
@FreedomCrawler7 жыл бұрын
+Taktakmo this one came with the Lightbar, harness and brackets. Plug and play. Others do not but essentially that’s all you need to get this running
@HooKsONyou8 жыл бұрын
I knew you got it wrong but I was like....uuuummmmmm...no. Wait what? lol good thing u clarified lol
@indyjons3218 жыл бұрын
Lights! Camera! Action! Replace the stock switch with a Red safety covered switch?
@FreedomCrawler8 жыл бұрын
Exactly what I'm thinking
@markcobb65617 жыл бұрын
are there any problems with moisture between the brackets and the windshield posts? ie rusty mounting bolts etc.
@FreedomCrawler7 жыл бұрын
+Mark Cobb no, I haven't had any issue with rust. There may be moisture but I haven't seen any problems
@znovosad5558 жыл бұрын
My cousins light bar got stolen off his jeep a year and a half ago. 52 inch rigid industries light bar. Went to class, came out a little while later only to find his light bar missing. They fortunately left his pods though.
@znovosad5558 жыл бұрын
And he lives in Texas too
@FreedomCrawler8 жыл бұрын
+znovosad555 Damn that really sucks. They are so easy to rip off.
@znovosad5558 жыл бұрын
+Jeep_ Noob yeah they are. Sad because people work hard for nice things and some jackass steals it and sells it for profit. His jeep went missing too but I never heard much else about that.
@Kophjager18 жыл бұрын
I'm from Austin as well and believe that I've seen that jeep around town. We just traded our 2011 in for a 2016. That light bar that y'all have says 2007-2014. Did they change something on the new jeeps as to make this light bar not fit or do you think it will be good to go on a 2016?
@FreedomCrawler8 жыл бұрын
no it should be good for all year jks.
@georgerabel46177 жыл бұрын
At least the girl did 95% of the job. The guy was only their for moral support and to hold the camera. It's good for people to know "how to's"!!!!!!!!
@tictocpops1_2764 жыл бұрын
Where did you get your mount brackets
@FreedomCrawler4 жыл бұрын
Amazon
@savinomenchaca64957 жыл бұрын
how long and what size bolts did you use my oem bolts are too short
@FreedomCrawler7 жыл бұрын
+Savino Menchaca we used the stock bolts for the mount. I really had to press down on the mounts to get them to bite though
@dylandevault32168 жыл бұрын
Shes good, you sure are lucky to have a girl like her👌
@606curvekillas78 жыл бұрын
Don't blame you one bit for getting a cheap light bar if they are stealing them like that looks good by the way 👍👍👍
@dragon2765mb6 жыл бұрын
Good video. You still have the lightbar?
@FreedomCrawler6 жыл бұрын
This lightbar is still on the rig but we do not own the rig anymore
@jerryloyd49697 жыл бұрын
nice jeep, how can I get the windshield decal.
@FreedomCrawler7 жыл бұрын
+Jerry Loyd Thanks Jerry, it's our Offroad clubs decal that I started about five years ago. Where are you located?
@jerryloyd49697 жыл бұрын
Tenn, i use to run with the tn valley 4whlr before I went in the service. I'm workin on getting back in one of the clubs.
@bob537526 жыл бұрын
Yeah you got a good view how about this way man. Nice video.
@ElGuapo317 жыл бұрын
good music taste and thanks for the help
@FreedomCrawler7 жыл бұрын
+HardOnGaming I appreciate that alot
@kellyb52318 жыл бұрын
what made yous get hummer sticker on the jeep ? i actually like it !. very different to normal wrangler stickers or something. i have a black 2011 jeep wrangler unlimited. and im definitely getting the 52" led bar. such a great video showing how to install thanks guys !:)
@FreedomCrawler8 жыл бұрын
Because the jeep culture is too serious now a days and everyone hates on everything. So now they have a reason to hate on something while myself and others who are out there just trying to have fun laugh and keep enjoying what we are doing
@kellyb52318 жыл бұрын
where did you put the switch on the inside of the jeep for the bar?
@FreedomCrawler8 жыл бұрын
Kelly lee Beresford on the bezel to the left of the steering wheel
@taktakmo35567 жыл бұрын
Thanks for the reply. The mounts I need are the one for a 2017 jku. Are theses the ones that will come?
@FreedomCrawler7 жыл бұрын
+Taktakmo should be. The mounts for all Jo’s are the same. The only difference you should see are 50” vs 52” mounts. 50” will hug the windshield all the way to the top vs 52” which are slightly wider at the top giving it a slightly wider look to its front profile. That’s why i prefer 52”
@mikehallock72496 жыл бұрын
Great video! Why does your Jeep say Hummer?
@FreedomCrawler6 жыл бұрын
Thank you. It’s because jeepers take their rigs to seriously lol
@shannanredden97408 жыл бұрын
Are you happy with the light bar? With how bright it gets with the spot / flood combo? I'm almost ready to get one of these in the red but want to make sure it will actually work, etc.
@FreedomCrawler8 жыл бұрын
+Shannan Redden I was happy with our 10" light bar really. The 50" is pretty overkill
@shannanredden97408 жыл бұрын
Thanks, I was just wondering about any issues with the brand of light bar, like not bright, stopped working, or maybe water getting into it, etc. They offer a red one just like the one you had ordered and I was thinking about getting it. Just wanting your opinion. Thanks!
@RetiredTony7 жыл бұрын
driving around like a "TARGET"? yeah i hear you man...here in Cali you can't have shit on your trucks cause everything gets stolen. Just can't have anything nice these days without some idiots messing with your ride....UGH Great detail and good price on light man.
@FreedomCrawler7 жыл бұрын
+Retired Tony Ramirez it's sad right? I hate that it's become the norm to have to worry about that stupid shit
@RetiredTony7 жыл бұрын
Jeep_ Noob damn right! caught someone trying to steal off my old k20 4x4, punched him out and I got arrested for defending myself? plain stupid! here in LA you can't have a nice truck tool box either without installing reinforcement padlocks smh.
@mayskn1007 жыл бұрын
jeep girl I need light's put on my jeep LOL
@amandamanning28706 жыл бұрын
What part do you drill it to under the hood?
@FreedomCrawler6 жыл бұрын
Drill the small module? You can mount that wherever you would like it to sit. We just used some of the plastic framing in the area
@megannapuzzo8 жыл бұрын
what brand light bar did you get? Also did it come with the mounts? I have been looking on amazon to because I do not want anyone stealing mine.
@megannapuzzo8 жыл бұрын
also does it whistle?
@FreedomCrawler8 жыл бұрын
+Megan Apuzzo I have the link in a few replies to others but don't have it on me right now. I can get it if you don't find it. I may have it in the video description also. It came with everything you need, mounts, light and wiring for under $90. Couldn't find a better setup if I tried
@FreedomCrawler8 жыл бұрын
+Megan Apuzzo it did whistle until I put the foam in between the fins.
@megannapuzzo8 жыл бұрын
+Jeep_ Noob I found the link it was the same one I was looking at!
@machin3doll6 жыл бұрын
Did you happen to note in here which brackets you purchased for this install?
@joeflynn34517 жыл бұрын
Wiring power by connecting ground first with switch on ? Recipe for disaster (injury,damage...etc.)
@FreedomCrawler7 жыл бұрын
+Joe Flynn keeps life interesting lol. It's all pretty low voltage but yes we do make mistakes. I try and keep the footage pretty raw, otherwise it gets kind of boring lol
@JohnDoe-gn2dn6 жыл бұрын
Clicked for the thumbnail, stayed for the installation.
@FreedomCrawler6 жыл бұрын
That’s how I felt when I met her
@NickJolliff5 жыл бұрын
You put those wires on the wrong post for the battery. Those are to tighten it down on the battery and can't function properly with anything connected. You need to get a nut and put it on the negative post that is empty with no nut. The positive already has 3 posts with other things you can loosen one of those and use. But don't use the posts you did as it weakens the battery terminal connection.
@FreedomCrawler5 жыл бұрын
Never had a problem with it but I get what you’re saying
@icarrrv8 жыл бұрын
nice one guys from Europeans living in Australia
@jadisortega64527 жыл бұрын
What size lift are you running?
@FreedomCrawler7 жыл бұрын
+Jadis Ortega this one had 3.5" rock krawler coils
@rongray41186 жыл бұрын
Young Lady is just like my wife, Deanna! Love to see Women who do things with their husbands and boyfriends! Thanks!!
@FreedomCrawler6 жыл бұрын
We definitely have a good time in this channel lol thanks for watching
@midninteranger43156 жыл бұрын
Hey jeep girl welcome to the big 4x4's family you need to master the tools girl but good job.
@ScottStClair-dm6vk8 жыл бұрын
Good job! Keep Austin weird!Cheers from Alaska by way of San Antonio!
@thats2odd7 жыл бұрын
I am just curious.. Does it whistle like freight train at highway speeds even after said fix?
@FreedomCrawler7 жыл бұрын
+thats2odd Working on better ways to fix the problem. Will post in our next videos
@THEKING-ho5yh6 жыл бұрын
The jeeps the looker but the view ain't bad! Lol. U guys are cool. That's how a couple should be! Always have fun and have some interest in your partners hobbies!
@FreedomCrawler6 жыл бұрын
Absolutely agree! Thanks for reaching out!
@Kophjager18 жыл бұрын
That's what I was thinking. Thanks!
@donmauproductionstv7 жыл бұрын
you understand those fins are the heat sink right? you understand how a heatsink works?
@FreedomCrawler7 жыл бұрын
+mauricio martinez yes and yes.
@dmartelis657 жыл бұрын
Why did you run the wire up the left side of the Jeep when the battery is on the other side? It was easier to run it up the passenger side!
@FreedomCrawler7 жыл бұрын
+dmartelis65 I think we’ve switched it up a few times since then. Each time you learn something new
@dmartelis657 жыл бұрын
Jeep_ Noob Cool! Great video. I just finished installing my 50" light bar on my 4WD and two 12" LEDs lights on the side and back as work lights.! Live and learn, it's the story of life!
@aaronmyers23826 жыл бұрын
tape the wire to a straitened out coat hanger and push through the firewall grommet, easy, come on jeep girl.
@FreedomCrawler6 жыл бұрын
We like to live dangerously lol
@cielomelgoza40038 жыл бұрын
hummers & jeeps are bad ass both american made.. i have a h3 my self
@FreedomCrawler8 жыл бұрын
+Cielo Melgoza I loved our H3. Great rig. Only thing I wished it had was a solid front axle and the 5.3. Other than that I would have kept it forever
@67sirmitch5 жыл бұрын
Always take off your rings when working on or around battery’s!
@FreedomCrawler5 жыл бұрын
True that
@Starbaby11287 жыл бұрын
What size tires are those?
@FreedomCrawler7 жыл бұрын
Starbaby1128 those are 37x15.5R20's
@Cam-gb1cu5 жыл бұрын
Mounting the light bar there is stupid because the light will shine on the hood and glare back into the vehicle and you won’t be able to see anything unless you point it way up
@FreedomCrawler5 жыл бұрын
I’ve never had that issue so I can’t agree with your statement on this rig
@TheCLAYDODSON6 жыл бұрын
how's the light bar holding up?
@FreedomCrawler6 жыл бұрын
Like a champ!
@drugtalk1013 жыл бұрын
Everybody talks about the noise that light bars make but I have two on my XJ and I have yet to hear this noise..?? And yes sir, the view ain’t bad!
@FreedomCrawler3 жыл бұрын
All about where it’s mounted and how the wind hits it. Sounds like yours are dialed in
@drugtalk1013 жыл бұрын
@@FreedomCrawler when it does whistle how do you use silicone?!