Lightning Fast 5-Axis ROBODRILL CNC Mill Arrives at Our Shop | Fanuc Industrial Robot Arrives

FREE Aerospace Academy:
bit.ly/TiAERO
CNC Machining is what we do. We are Experts and on this channel we are bringing our knowledge and experience to YOU. Want more? Learn CAD, CAM & CNC Machining through our FREE TITANS of CNC: Academy.
Subscribe for daily content and expert knowledge: bit.ly/SUBTITANS
___
___
FREE CNC Machining Academy. Join the Revolution:
academy.titansofcnc.com
Follow us on Instagram:
/ titansofcnc
Like us on Facebook:
/ titansofcnc
Join the conversation on our Facebook Group:
/ titansofcncacademy
Connect with us on LinkedIn:
/ titansofcnc
Follow our CEO, Titan Gilroy:
/ titan-gilroy
___
___
THANK YOU to our Partners who make this content possible:
Kennametal - bit.ly/TIKennametal
Doosan - bit.ly/DoosanTiYT
Mastercam - bit.ly/Mastercam_Titan
Blaser Swisslube - bit.ly/TIBlaser
Mitutoyo - bit.ly/TitanMitutoyo
FANUC America - bit.ly/TitanFANUC
Royal Products - bit.ly/TIRoyalProducts
Schunk - bit.ly/TiSCHUNK
JobBOSS - bit.ly/TiJB10
Tormach - bit.ly/TITANTormach
#CNC #Machining #Machinist
MB017E7JAFBH4VC

[@mattmurrell4089]

I have recently taken over my late father’s company making medals, military insignia, honors and awards. The company is over 45years old and your videos inspired me to push to company into the 21st century and we have just received our first ever CNC machine... the Fanuc RoboDrill. So thank you for the push I needed and keep up to good work

[@ninjaabcde]

How's your experience been with it? I'm thinking of buying one

[@ExMachinaEngineering]

"You need to compete as a country, you need to take education seriously..." Damn, I can only hit "Like" once.

[@jackflash6377]

Now to just convince the politicians and get the indoctrination centers, I mean schools, reformed.

[@jackflash6377]

@Marius Ipad I used to sell items on Amazon. One item was a device I invented and I was selling about $1000 per week for several years. The chinese copied my product exactly, used the same words from my listing except they were selling for $10 less. Yes, the quality was inferior but it got the job done. Just recently Amazon shut down my listing because it was deemed a "counterfeit". Someone had filed a complaint that my product was counterfeit despite the fact that I am the original inventor, I had been selling the product for going on 5 years. I had to jump through hoops to prove that I am the OEM for the product. It was just too much so I pulled the product and all other products from Amazon.

[@temoherbert172]

@@jackflash6377 The same happened with a mexican company that was a pioneer in the drone area (it was before the drones/quadcopters become popular), a chinese company, DJI, copied all the designs and the technology used in the mexican drones and become selled them for less, the mexican company declared bankruptcy a year later.

[@tommywood2983]

Ya very well said

[@forloop7713]

@@jackflash6377 did you sue

[@johnscott1981]

I have 3 of these in our shop with the 31i controller. They are pretty nice machines for sure

[@RadDadisRad]

I’ve built and assembled a lot of Fanuc machinery. Crazy good safety integration, doing demos is the best because I would run at 15-20% speed to dial in simultaneous operations and then start ramping up the speed and the people’s faces when this thing got over 60% speed was funny. Especially when it was in the 80-90% range.

[@halopartyboy]

I learned to program on an old 3 axis robodrill with a screen so dim you’d have to hold a piece of cardboard overhead to cut out the glare to even see the screen. Needless to say they have a very special place in my heart. Fast, dead on accurate, and it taught me about working around a machine’s limitations.

[@ninjaabcde]

Would you say it's a good machine?

[@OctaneWorkholding]

Fantastic Titan, you are making a difference in manufacturing that is spreading around the world. This industry has been very hard to enter and succeed for a long time due to information being held back. Your Academy, and all of the youtube creators sharing their experiences is making the future of manufacturing look greater than ever.

[@VPEEK]

Nice to see the robodrill getting some love. They tend to be overlooked being BT30 and max 21 tools. But they will churn through the rights parts.

[@ninjaabcde]

That's the issue with bt30?

[@r33skyline95]

genuinely passionate about his trade, great to see. Watching from Australia.

[@mythattak]

I’m loving the new aerospace academy! It’s such a great improvement to the already wonderful courses that you had on there! I’ve learned so much awesome new stuff that I can use everyday in the trade. Thanks so much Titan!

[@mistgawel]

I'm working on a Robodrill and damn am I excited if I'll se Titan pushing this Machine to the Limit!

[@LTR1420]

These are great little machines. Used one a lot at my last job. Would love to have one at home.

[@bengibson2456]

The last minute and a half of this video is one of the most profound I've ever heard! Educate and invest in our youth! With them, the trades die!

[@kirubakaranpeter49]

Brother & Fanuc Robo drill are both excellent machines to work with.

[@adamtankersley7441]

Cool new setup. I’d really love to see you integrate this with that new shop floor CMM you showed a while back and have it tweak offsets, and queue rework and a cull pile. That’s the high level stuff- Getting into the real nuts and bolts of the communication back to the PLC and making it really get after it.

[@RHCPFAN-yk6sw]

We have a robo drill in our shop, I have ran a few super simple parts on it, but I’m excited to see you run it full board. Love this trade and watching your channel. BOOM!

[@AzlianaLyana]

😱Oh love it! That's the dream to have it! At the moment I'm still using 3-Axis, one day I'm gonna get that one too!

[@jackspnc]

I used to run one of these as an apprentice, started to learn Fanuc programming on it!

[@Fencer85]

Couldn’t agree more, like the drive bro, keep em turnin and a burnin

[@luis11375]

I love those robots!!! I came across this video in Linkedin. I always found manufacturing fascinating. I am looking forward to learn more about CNC programming.

[@jayz1719]

Very Cool Titan. One of the first machines I purchased for my shop back in the day. Running to this day. Bought it to run aluminum extrusion parts. It was like pulling the handle on a slot machine hitting jackpot.

[@cruddCNC]

Super cool... you’re doing a fanstastic Job... taking charge and leading the way 😎

[@zaharovtechno]

Молодцы - поздравляю с покупкой!!!

[@kar694]

FANTASTIC !!!

[@wolfrobots118]

That one kills me....you make me wish I had these machines too...lol

[@departureblue]

Super pumped!!! Rock on, Titan!

[@evilgoatgarage4193]

Pretty stoked on the robo still videos since I have 30 to program, I’ve picked up some short cuts from you on our haas machines that have made my life 110% easier

[@tj9382]

Wow, great business philosophy can’t wait to see what this can do.

[@AndrewBrown-dz5jx]

Great addition to your machine lineup Titan! I have yet to find a machine that can beat a Robodrill on a cost-value basis, especially once you slap a robot on it. It's speed more than makes up for it's torque and HP limitations, and FANUC really nailed it with the newer advanced longbed Robodrills like the one here.

[@bengibson2456]

Couple it with the JK Hydroclean and its unstoppable!

[@jakerobinson3468]

I used to run one of these bad boys at ZF Ind. and loved it. That thing is super quick. Love the content and the message Titan keep it up. ( glad he's not a HAAS spokesman anymore lol )

[@runejakobsen9958]

Money talks, BS walks...

[@prave455]

Can't wait to see it working

[@unmguy2000]

I replaced a couple of old tired Fadal CAT40 taper machines with a pair of Robodrills. Got laughed at because of the 30 taper but with the dual contact 30 taper, it has outperformed those old Fadals and had a few people tell me they were wrong about the 30 taper. They have been great machines, especially with high pressure thru spindle coolant.

[@TheDandyMann]

Speaking of the Academy, I finished making the cad models for both the building blocks and rocket series woot woot

[@hyphen2612]

Tapping centers are some of the most compact and versatile CNC machines! When used properly they can take deep cuts and do high feed rate. And of course, they are extremely good at drilling and tapping!

[@john.hunter]

It's very similar to MillTap 700 that i worked on some day. It's toolchanger liked to throw tools out of magazine while changing tools

[@russguppy8761]

Great video. You are showing everyone how it really is. And it’s not that hard.

[@TrPrecisionMachining]

very good video..thanks for your time

[@maxnguyen22]

That's dope. I can't wait to see how it does at 24k. I'm running at 12k on my mazak. Beautiful finish. Just think of 24.....yea chrome parts

[@runejakobsen9958]

Mazak have 40k spindles too...

[@PKmode]

Titans of Master P. "Make 'em say Uhh!" LOL

[@dannybartlett4225]

Been waching since the start well done Titan bringing cnc to the 21st century boom! Uk side

[@jimmymars619]

Could I know if fanuc robodrill cnc can tap holes of multiple workpieces set on the pallet with multiple spindles (i.e.2) at the same time simultaneously?

[@hishamcnc8835]

congratulations titans of Cnc

[@suck.d8530]

Keep on growing Strong Brother💪

[@landonjacobs830]

After this summer I will be working on CNC machines and finishing up a project for airplane wings or helicopter wing prototypes.

[@yvonbilodeau1102]

Seems like you are getting a new machine every week... Congratulations! 😎

[@justinl.3587]

Titan should be referred to as THE image of what an employer should be. He thinks forward all the time. He also thinks about his employees and how to make their lives easier and more productive. I work in a shop that thinks nothing but how we did it years ago and that’s good enough. There’s very little forward thinking and when there is, it’s a fight and struggle to push them towards it. It makes my job much less enjoyable and a lot less productive. Cheers to you Titan. I wish you had a shop on the east coast, I’d love to work for someone like you.

[@crazytrutas]

Exciting stuff. Looking into the future not the past. 👍

[@spaceefficient9540]

I love this guy! U guys should really try his series! I had a lot of fun with the Titan Building Block series.

[@TritonTv69420]

I ran robo drills for a few years... kinda fun since they are so fast. Although the generic fanuc controller is funky. It alarms out for a lot of things. Like when you reset it will alarm out if you dont give it a few globals. Not like a haas where you can just reset and restart with no alarms.

[@bluexnils]

cool to see a machine i actually worked on aswell, greetings from switzerland! really nice channel and great content!

[@GreenDreamzGarden]

I use to be responsible for keeping 6 of them setup they had pallet changers no robo arms but those are great little machines the tool changer is like lightning i love robo drills another great video titan

[@jamespark_85machiningtv]

Oh my god! that's a new machine! so amazing! FANUC is Very Good!

[@vadosovo]

Its just a dream for my garage!

[@dipeshpawar1]

I like your work and Watching from INDIA 🇮🇳

[@007epifanio6]

Parabéns pelo canal 🇧🇷👏

[@robertheaney1882]

Ty. Mind and use Big Kaiser BBT30 dual contact spindle tools for best in class tool holding.

[@jrard92]

Those who think he knows only about CNC machining. Wrong. He's also great at marketing. Look at his videos, so cool

[@alexloper3084]

Titan is the Andrew Carnegie of our generation. Changing the industry for the world

[@donshaffer9733]

I'm a retired CNC programmer.. Your stuff is great.. I would like to get back in to it if you have a position

[@muhammadyusuf-yh4lh]

So cool man

[@paparpsdex823]

I like this machine I operate and set up even I program more accurate result for machining.❤️❤️

[@marouanebenderradji137]

we are excited too literally jumping on my seat, the other machine guessing it will be a doosan smx or mx but it is a millturn aaaaaaaaa so cool thanks a lot titan thanks a lot

[@HondaBoy]

Marouane Benderradji will be about time Titan looks into millturns, it always surprises me that he doesn't have any, given some of the parts he's had to make

[@glennedward2201]

Like my Robodrill. It’s older but a good machine for small parts needing run very fast. Anyone know where a used 5 axis may be available to fit a Robodrill?

[@TheDavidb138]

Getting one for our work. Be interested to see any follow up videos.

[@Kuban.1968]

Классный станок работал на таком 7 лет только без робота.

[@muhammadbilalkhan956]

Nice machine i use 5 of them on daily basis

[@ClockwerkIndustries]

Man I was looking at robodrills. I wish they were easier to shop for. Would be nice if all machine tool companies had a build a quote system like haas

[@Donkusdelux]

I actually watch some of your videos Ci and its why I say this, but always buy these machines used. the old seiki/ Japanese mills are still accurate 30 years later even with HARD use. Cincinnati machines are good aswell. Stay away from haas, they are cheap for a reason. if you ever make it big that's when the new stuff comes.

[@kyle_in_tex8422]

Titan, do yourselves a favor and buy Big Plus tooling if your spindle is made for them. Bless you brother.

[@MrJTJINX]

Dont take your eyes off that robot, Titan, ive told you before on one of your live sesion they have a life of their own (Italian Robots being used at Nestle)

[@ninjaabcde]

I'm still waiting for the new video of this machine

[@dgafbrapman688]

ran one of these at my first job, they are scary fast, 25% is as fast 100 on some other machines

[@user-uz7be7bg5n]

Boom!

[@jerylbeachy3525]

Do you still have the DMG Mori machines and the Makino?

[@555Superd]

YES, you got the FANUC and not the China Junk KUKA!!!

[@mrwolsy3696]

Titan, many scientists want to start manufacturing on the moon, maybe some of your students could design a machine tool for that industry?

[@jimmybon9314]

University of Colorado School of Mining has been working closely with NASA, however, space mining will probably definitely be the frontier for obtaining rare minerals that are becoming increasingly even more rarer as the years goes by on Earth.

[@MrJTJINX]

I think i read somewhere they are already 3D printing on the space station

[@Patchworkdaddy007]

You are so a nice chief! I wish i had the same....but my real chief diet last year and the new one is a looser....👍👍👍🇩🇪

[@zachk7305]

Expanding to Automation Academy now? What are the odds we see Metrology Academy in the future? The world of CMMs is fascinating, but daunting.

[@antonwinter630]

couldnt agree more, it will bring jobs back by making manufacturing competitive

[@wanda3004]

As you should be! Nice investment!

[@josephtiberio2503]

that message is the GOSPEL brother !!

[@pand0ras]

Got a robodrill at my workplace, that spindle is loud AF! or is it just ours?

[@bengherasim2560]

What's happened with the dmg machines and the big boy makino?

[@kemcSLO]

Why decision on the fanuc robot?

[@muthusubramanian7042]

Kindly Uploading Robot Teach Learning Series Mr.Titan

[@artmckay6704]

Titan, maybe I'm totally missing something but it seems to me that virtually all parts could hugely benefit from sawing out big chunks of material before doing any milling. I see many operations where I would mount a circular saw blade in a given machine head and then I'd saw out every cubic inch that I could before milling anything. Am I missing something here? Thanks! :)

[@alex_yates]

If you're talking about having the machine saw chunks off: Would you want a big chunk of metal dropping into your machine? If you're talking about doing it manually before putting the stock in the machine: takes waaaaay too much time compared to having a machine just do a bit more roughing out. Big insert cutters don't take that long to shift slot of material 👍

[@crisp4085]

I can imagine working for titan would be amazing but i can also see that its a bit of a eye roll when he gets to the point where he is explaining the industry part and just keeps going and going on about it, But that is probably one of the reasons why i watch the videos its because he has a special way of explaining things and really gets the point across and really helps me understand what is going on and how its going to work. Amazing work titan keep it up!

[@michaelbronson]

The JKI Coolant Tank claim to fame is to not have to clean your coolant tank for 2 years! What's the ROI on that?

[@tightmf]

Did you get it from Method? So jealous right now.....

[@balasubramaniam230]

Super giant

[@clarkmaq]

Congratulations once again ! You should be the ministry of education in our country!!! Or any other country anyway.

[@sommersetcoker5455]

Dude, how do i get a shirt?

[@Baxtersadventures]

Titan is it true that you are going to start buying all doosan Machine Tools? Or is that just a rumor?

[@TheFeralEngineer]

Buy? Guarantee everything is given to him either for free or on consignment

[@poofy917]

Oh lawd the dress-out on that robot is hideous

[@playsimple4759]

First comment

[@DarqeDestroyer]

I would think that skilled sculptors would be terrified of CNC machinery. It takes years to hone their skill, and even once they have it, weeks or months to make a statue with a hammer and chisel. On the other hand, anyone can stick a bunch of photos into a photogrammetry program, build up a 3d model of the person or object or whatever, and then feed it to a CNC mill or a 3d printer, etc. and have a physical replica made just like that. Just as an example, there is already a highly detailed 3d bust model of George Floyd on the internet. The man is only dead 6 weeks and already anyone with a 3d printer or a CNC rig can make a bust of him. Now don't get me wrong, I'm not bashing the existence of such technology, I'm just stating that with it being what it is, traditional sculptors may well fear for the future of their trade.

[@vrdengineering5204]

sell me it.

[@keithmo80]

Do mazak

[@danohpsp]

Why does Titan keep using the bottom of the barrel machines?... Robodrills are not bad but they are not Brother Speedios...but Haas and Doosan, Tormach? LOL...no excuse to use better with those.. Guy needs to step up his sponsor game

[@TheFeralEngineer]

At this point, it looks like he's taking everything someone is handing out

[@runejakobsen9958]

"I crashed the machine, BOOOM"

[@Zanatrey]

Love the technical information. Could lose the American Exceptionalism in every video.

[@Tnj8228]

Nope don't like it at all. Taming away jobs

[@DarkMatterLP1]

I was watching the vid, watching him talk and i was wondering when will he stop talking and actually start the video. I looked, Video over. No content what so ever