LIGHTNING Hits Boats. Here's How to Deal With It [Capable Cruising Guides]

We live aboard our antique sailboat, Temptress, where we (Emily and Clark) fix almost everything ourselves. Today's Capable Cruising Guide video is all about Lightning-how it works, why it hits boats (even those without masts), and how to protect yourself.
WHAT’S IN THIS VIDEO:
What is it? [03:00]
Grounding to the Water: [07:15]
Creating a Pathway: [08:20]
Pre-Storm Preparations: [09:20]
Getting Hit: [12:10]
Pre-Storm Preparation [16:40]
More Stories About Lightning: [19:34]
WHERE TO GET THINGS:
Ion Dissipator: amzn.to/2V8vjMe
Dynaplate (Giant): amzn.to/2Jc6Rai
Dynaplate (Super): amzn.to/36a6i9K
OTHER VIDEOS:
Watch Clark fix a 2-stroke: • Fixing a 2-STROKE OUTB...
Watch Clark fix a 4-stroke: • Fixing a 4-STROKE OUTB...
Watch Clark’s diesel engine hacks: • Boat DIESEL ENGINE Hac...
PLEASE SUBSCRIBE and CLICK THE BELL to see new videos every week, and get more knowledge and advice from Clark.
----
SUPPORT OUR VIDEOS and BUY CLARK A BEER!
Patreon: / emilyandclark
PayPal: www.paypal.me/emilyandclark
Buy S/V Temptress shirts and swag: teespring.com/stores/emily-cl...
CONNECT WITH EMILY & CLARK
Facebook: / emilyandclark
Instagram: / emilyandclark
---
#lightningstrike #sailing #lightning #capablecruising

[@ScottLaneSabineParish]

Having spent quite a bit of time putting lightening protection schemes and manuals together for companies that use land based towers for comms, I very much appreciate your using science to develop your scheme instead of wives tales, sea stories and anecdotal false positives. Lightening is simply the result of a difference of potentials that use the least resistant path to equalize and when this path has resistance, heat is the biproduct. Intense heat, that excites the atoms and converts the gaseous state of matter into the plasma state. The secret, as you pointed out, is to first try and reduce the probability that you are the most conductive path and then to give the flow of electrons, a clean path in which to equalize. I have heard of people who think that using their metal through holes and water systems as a path, but this is incredibly dangerous and can easily lead to a major hull breach. Avoid 90 degree angles on your ground tails and make any turns in direction as gentle as possible. Not only unplug antennas, but also power supplies if lightening is probable. I am not sure how I feel about your copper run along the bilge, but obviously it has worked for you. My personal thoughts are to use the guys and stays, but there are risk with this as well as any conductor is basically a large fusible link and in the right strike potential, could burn out and cause a demasting issue. But as you point out, it is about reducing risk. Thanks for your video.

[@EmilyAndClark]

Thanks for your comment Scott. I've pinned it to the top as you have made some very good points. I wish I had mentioned the point you made about no sharp turns. I agree with you about thruhulls. NO WIRES TO THRUHULLS! I know that is against popular opinion but bonding thruhulls can cause them to loose their zinc and fail. As for my strap in water. That area of the bilge is usually dry. We just had a lot of rain and water coming down the mast collected there because of a clogged limber hole. Again thanks for your comment. Clark

[@williambunting803]

Hi Scott, thanks for your thoughts. Yes, the stays, and yes the risk. That is why I am thinking of creating a separate copper subsidiary stay to the masthead to give the lightning a guided path. The stainless stays are relatively high resistance compared to copper. Then it comes down to what details the masthead device should have, and the tail to the water. I am thinking that the tail can be incorporated into a specially made fender to disguise the lightning tail and to space the line a little distance away from the hull. The copper for a quick installation can be aircraft wire flex as this is silver plated and should last longer in the elements.

[@ScottLaneSabineParish]

@@williambunting803 Just to make sure that I understand, you are talking about adding a fake stay and not replacing one with the aircraft wire flex? The copper and silver would stretch too much to be good stay material on their own. This would definitely protect the stays and guys from becoming a fusible link and in the marina, the fender idea would look neater. But, if just left exposed, the copper tinned alloy would oxidize fairly quickly and especially underwater, it would quickly give up their free electrons to electrolysis. This is fairly similar to how we protect communications towers and the radios. The difference being that the antenna cabling (copper) has a specific use and we attach ground tails on the legs or base of towers to a ground ring that is attached to ground rods. The copper comes into the communications building and immediately goes through a TVSS (trans voltage surge suppressor) which acts as a fusible link and has a ground tail on the tower side, which is connected to a ground bar, connected to a halo and path to ground. I have been in a shelter during a strike and it was frightening, but it works. I am not sure that it would function well though if left installed for a long period of time (due to oxidation and increased resistance compared to the stainless we use the tower itself for the main conduit) compared to a quick fit tail from the stay. Also, if it is used just during potential strike periods, how and were would it be stored? If using an exane or welding type cable, it is fairly heavy and cumbersome for an additional 80' to 120' to be stored where it is accessible quickly yet kept dry and clean. (electron flow is on the surface of the copper and not through it's core). On a boat that gets hit frequently, it may make sense, but if it's on a boat that rarely gets hit, I don't think it makes cost sense for a permanently but frequently replaced system, but I am always open to being corrected. If you have some of the engineering and or build one, I would be very interested in seeing your product.

[@ScottLaneSabineParish]

@@williambunting803 In my other comment I talk about cost. To clarify, a comm tower may have well over $100K spent on it's lightening protection to protect the radio cabinets and contents which can be worth well over $500K per unit. They use disposable TVSS's that can be replaced per strike and these can cost upward to $1000 apiece. This makes financial sense when there may be between $500K to several million dollars worth of equipment. On a boat worth up to 300K, that is not your home and livelihood, it has to be tailored respectively. I do not see your cost being anywhere close to $100K like a communication tower, and an exane type cable that runs along the stay would only have exposure at the connections and in the water. Sorry, I am still running my thoughts over on this and should take more time to think through.

[@williambunting803]

@@ScottLaneSabineParish Yes Scott, this will be a dummy stay purely as a lightning rod. Copper can be titanium coated for corrosion protection. I haven’t done it yet but I have copper parts that operate in phosphoric acid and high temperature and from other experiments I am sure this works, though doing it to wire would require a supplier to want to do it. The last metre to the water can be Carbon fibre which eliminates the corrosion problem. Perhaps you could suggest how much copper is required for the stay, sqmm? And what is the condition of a lightning conductor after it has taken a hit? What are your thoughts on the dissipator collector end? The more I think about this the more certain I am that it is vital to keep the electricity flowing outside and around the boat. The next part of this is to come up to speed on surge arrestors.

[@falkpatt]

Thanks this is a rare example of a sailor with actual, real experience, humbly sharing knowledge with the community. I'll subscribe to your channel 👍

[@EmilyAndClark]

Thanks Charles. I hope you look through our older videos. I'm sure you will find other videos that you'd like. Emily keeps our playlists in order so you might choose to use those to make your searching easier.

[@meatdog]

I have lived on my Ericson since 1993 and have sailed all over as well. I had a friend whose boat was struck and ironically he was a boat insurance underwriter. He FAILED to take all his own advice and his boat took a very damaging lightening hit. So, people, pay attention. This is real and everything being said here is TRUE and life saving. Thanks for the video.

[@tomblackwell9496]

I was utility engineer for Emory university in Atlanta in the mid 90s. We had a building that took repeated lightning strikes, causing damage to control systems every time. After a bit of research we installed an atomic lightning rod. It uses an isotope that produces enough energy to ionize the air around it-similar to a dissipator. No strikes since....

[@shortchanged.]

So it stop the static build up in a sence

[@PheelTheJoy]

I was once caught in a storm on a shrimp trawler, as we fought our way back to more protected waters we received a call over the radio from a fellow trawler not far behind us running towards the same cover. They told us we had took a strike and our stern was on fire. I had just come in from the stern from lashing things down to prevent losing them overboard so naturally I was confused, we had a nearby strike but I knew we hadn't taken one and couldn't be on fire. I stepped back out the door and the entirety of the rigging was alight with St. Elmo's Fire, truly the wildest natural phenomenon I have ever seen. I felt like I was inside one of those electric plasma globes children play with. Come to find out, St. Elmo's Fire on a boat is a good sign of a proper ionic charge transfer that should prevent you from being struck.

[@m1t2a1]

Wood mast on a wood boat. I generally clip a battery booster cable to a shroud and put the other end in the water. Red handled cable on the port side of course.

[@danoyes1]

Wow, I've got a gaff rig stainless stays on a wooden mast with about 3ft of wooden mast above the cross trees where the stays attach if I put a jumper cable on the stays into the water is the top of the mast in more danger because I made a easier path for the lighting? 😱

[@EmilyAndClark]

Interesting. I theory would argue that the chances of being hit go down so much that it's less important what happens if you are hit. I know I'd rather loose a mast tip then have a hole in my hull.

[@m1t2a1]

@@danoyes1 I think the theory is to allow free trade of electrons between water and clouds. No big enough build up to cause a strike.

[@m1t2a1]

@@EmilyAndClark I'm in the prevention camp too.

[@danoyes1]

@@EmilyAndClark yeah you've got a great discussion going here... I liked the explanation of which clouds are the threat, it's clouds ready to discharge in your immediate area. As I understand if the distance from the cloud to the water is shorter at the moment of the lightning strike then the bolt will follow that path, but if the distance from cloud to your mast is shorter then it will follow that route so for a given mast height there is a general geometric equation that will predict weather a charged cloud will strike your mast or thewater. .. and the taller the mast the larger the area of sea which is further from the clouds than your mast tip... sooooo you guys seem to be saying that if you are in the danger zone it's better to be assisting with the dissipating of the charge than trying not to be conducive ... thanks for the discussion!

[@It-b-Blair]

Superb! Great advice 👍👍

[@senseipaans]

Thank you for all this info

[@sonnybrooks264]

Old sailor I have sailed with carried a pair of jumper cables. When lightening starts he would one end of the jumper cable to the mast and threw the other end into the water. Sounds logical since he has never be struck.

[@mikeg3660]

Really great video. As a teen sailing in a race many years ago, I experienced the worst lightning in my life…. Truly terrifying soaking wet on a 22 foot boat with sails out of control with the mast waving back and forth with steel cables all around which we were holding to stay on the boat….I really thought about swimming to get away from the boat….ugh still makes my stomach turn. Anyway thanks for the great info.

[@thisoldboat7393]

Excellent content, thank you for sharing!

[@oleran4569]

Thanks for researching and posting this!

[@MrBobVick]

Used to see fiberglass saltwater tanks hit by lighting all of the time, even the ones with official tower type lighting protection. The chlorides in the salt water were the same as the Gulf of Texas water, so in my mind on a boat the salt water is like a negative asking for a positive to feed it. It has been years since I was at sea, so thank you for your elaborate dissertation, way more than I knew.

[@campbelljenkins2380]

Nice vid, one other issue I would add is your DC electrics that go up the mast need to be powered via a DC-DC isolated power supply. That prevents the earth in each device up in the sky from being a path to ground. So nav lights, radios, gps, wind gear etc. Classed vessels also have this for a reason.

[@jasongarry1330]

Appreciate you taking the time to make these videos

[@EricWayne0807]

Very informative. Thanks for sharing.

[@bayview7580]

Great subject and coverage. An episode about bonding and grounding would be a wonderful help.

[@billderinbaja3883]

Clark, I love your videos. You always ask for discussion topic suggestions... this is a really good one. How would you install a bonding strap in a modern boat? How does the bonding strap connect to the water-metal-ground? How do you splice peripherals (engine, stanchions, mast, etc) onto the bonding strap? Connections make the circuit.

[@EmilyAndClark]

Good idea. But I don't think it needs a video. Just drill a hole in the end of the strap. Put it over an existing bolt and tighten the nut back down. To connect two straps, again drill holes and bolt them together. Best to use bronze bolts for the connections in the bilge. And no sharp bends in the path. Gentle curves only. Good on you for doing this. There are no promises with lightning but you will sleep better knowing you did what can be done.

[@bayview7580]

@@EmilyAndClark I service boats that have no bonding. The importance of bonding and the practice of adding bonding.

[@garrylearmonth9313]

I was out in a "tinnie" and got caught out in a storm and I have to admit we felt so so so vulnerable. Luckily the storm went different ways to us thankfully.

[@querubimsantos2347]

Great episode!!!!

[@johnbolongo9978]

Voice of reason ....great info. Thank you sir.

[@MrPetermil1984]

Yes!! Great educational video, and on top of that a story time at the end! Perfect! Thank you for that!

[@EmilyAndClark]

I didn't know if anyone would stay till the end. KZbin put an ad just as I say bye. You're very welcome.

[@SailingVesselIntention]

@@EmilyAndClark I stayed, too! I loved the story after the good bye. Felt like the more intimate 'after party'

[@ian_griffiths]

I like your vid Clark. The reason why you’re still getting hit is that your dissipator needs many more points. When you replace your knackered one, add multiple units. It’s all about suppressing the bld up of charge so your corona doesn’t get overwhelmed and the ions saturate. Saturation is bad. Add a bunch more points to maintain the corona (st elmos fire). Good luck 👍🏻

[@danoyes1]

Is a wooden boat with wooden mast and stainless rigging more or less likely to get hit by lightning? Should I have a ground cable that I can attach from my stays/chainplates to the water?

[@donaldtownsley4099]

Awesome presentation! Really enjoyed being educated!

[@gorongo4202]

My first lightning experience on a sailboat happened while I was at the helm and a storm came at us between Greece and Sicily. No shelter, no joy. Neither I nor crew had any experience and weren't sure what to do. We hove to, and stayed below deck away from the mast and electronics and rode it out while lightning burst all around us for about an hour (seemed like hours). Thanks for sharing your insights and experience. Pretty certain I'll be better prepared next time learning from you.

[@philhardwick100]

I’ve been hit three times at my own dock while restoring an old boat with all the wiring and bonding removed. Twice it simply blew out the shore power cable ( just for working and dehumidifier). The third couldn’t find a path and jumped to a spot where a small hole had been plugged. The result was a 6” hole. Fortunately the new engine and generator were hanging above the sole to be installed the next day. Also my draft is just less than the depth at my dock at high tide so the repair was not a problem. I’ve decided to install all electronics on the mizzen and use the main mast as a lightning rod by installing a 3/4” x 6”x 2’ slotted copper plate with studs on the bottom beside the keel with a bonding strap and trail wires from my upper shrouds. I’ve heard the water in the dynaplate can superheat and explode..if you sail you take your chances!

[@k1mgy]

Piling on here: A negative charge in and at the cloud base discharges to the positively charged ground state. Otherwise you'd have no energy coupling. There are positively charged ions at the very top of large cumulonimbus, but these are associated with only about 5% of lightning discharges (they are the most potent, according to NOAA). Using lightning arrestors (poly phaser comes to mind) just prior to your comms gear is helpful, provided you supply a good ground. Protect all DC/AC power inputs using similar bypass protection. Disconnection is best, but not always practical. Sufficient discharge will generate an EMP which all your fancy protections will not assuage. As the author suggests, keep a portable radio in a tin box that's well grounded. Hail Mary.

[@hthring]

i too had thought it was a potential difference between the cloud and ground that is equalised by the lightning

[@Kevin-lo1le]

Great video, thanks 🙏

[@chraven69]

Thank you for the information 😁👍

[@GeoffreyMH]

Have been hit twice ourselves (once mid-Atlantic, once in Belize). Recommend an emergency VHF aerial in case you are hit by the first strike before you can unplug your radio.

[@EmilyAndClark]

Ais antennas are good for that nowdays

[@GeoffreyMH]

@@EmilyAndClark Also note that if the water is flat and the spray is horizontal then you are very likely in a microburst.

[@vanseventy]

Depends on what boat you have. If it’s American made then you can do this because the bot is bonded. European boats are not bonded and everything runs through the negative or common instead of the sacrificial anodes on a bonded boat

[@michaelcalise6111]

Thank you for the update on lighting and the precaution to take.

[@Fred-rv2tu]

Great video! Thanks for all the information, I'll be taking it to heart.

[@jasonmcintosh2632]

I'm not convinced. If there's a negative charge in the air, a positive charge will develop under it on the ground (not a negative charge). Dislike charges attract and they will want to neutralize the charge through a lightening strike. The lightening will follow the path of least resistance. If your mast is grounded to the water, your mast will be the path of least resistance. If your mast ISN'T grounded to the water, it won't be the path of least resistance and it SHOULD be less likely to be hit than it if was grounded. I've had lightening strike the water a few hundred yards off... had my mast been grounded it would have been more likely to attract the lightening. I've never heard of someone being hit as much as you've been hit. I believe it's because of your grounding strap. I'm not sure why your dissipater helped, but I'll accept the idea that it did help. I'll have to give this more thought... I'd never heard that a keel stepped mast could contribute to blowing a 2 foot hole in your hull. I believe it though... It's the best reason I've heard for getting a deck stepped mast.

[@sleethmitchell]

yeah, doesn't lightning bridge the gap between OPPOSITE charges? like on the spark in my motorcycle's ignition system?

[@louisseaman8455]

​@@sleethmitchell @Jason McIntosh, While I like the idea proposed by Clark, I have never heard a completely convincing argument for giving lightning a low resistance path to the ground/ the plane/ the place with an opposite charge. The implication of the theory here is that your mast and boat, would actually dissipate the charge in the atmosphere, and lower the charge between the air and the water, and PREVENT lightning in your particular area. If you think of the atmosphere and ground as two oppositely charged plates of a capacitor, a conductive high point on one of the plates will be the place where the spark occurs once the breakdown voltage is reached. I don't think there is anyway to get around the fact that your mast is a very nice conductor, and I would say the line between "dissipating the charge" and a lightning strike, is too thin to count on.

[@sleethmitchell]

@@louisseaman8455 yep.

[@StellarSailor]

Great video - love from England!

[@ericcoffin1696]

Great educational lecture, Prof. Clark, and awesome stories of the raw power of nature.

[@whitetail7516]

Thank you for putting this out. I've bought a dissipator for my Typhoon, which we hope to get onto the lake in Nebraska in area known for lightening. Now I will back it up with the plate on the hull. I will do the same on my 25ft sailboat. Thanks again, great video.

[@EduardoVazquez-yd5yi]

Good information thanks a lot

[@user-kq2bw1qb6e]

I am mainly an auto mechanic and I liked what you said about (lightning) a lot of vehicles have grounding problems

[@tiziaoconnor9014]

Good storyteller and great advice! Thanks sir!

[@johnathanlivingstonseagull5524]

Uncommon intuition and a rare grasp of physics shared openly in good faith. Thank you!

[@notdoctors]

What an awesome, well-spoken and captivating storyteller! And so full of good useable information. This is now my number one channel! Thanks for all you bring here!

[@infiniteinfinity9802]

Very informative and enjoyable video. Thanks for sharing your experiences during the thunderstorms!!! Just subscribed👍⛵️

[@keithlester9152]

Very interesting. Thank you.

[@5minpick-me-upswithlorenwa496]

Thank you really appreciated the info. I will applying the knowledge gained here to improve my 40ft timber sailboat.

[@MessagestotheBrideofChrist]

Amazing instructional video by a Master level teacher. Well done! Love watching. ❤️

[@rnunezc.4575]

Thank you. Very good info.

[@atxsailor452]

All great advice! Thank you!

[@EmilyAndClark]

You're welcome. Thanks for watching.

[@annhysell6064]

2nd or 3rd time I have watched this video. As always, Emily & Clark, been watching a long time, have saved many of your videos and this one in particular. (Along with floating painter, washing clothes, et al). Knowledge rules. (scientific primarily). Please continue. Thank you for sharing your expertise, both of you.

[@shawneldridge4781]

Excellent information thank you

[@EmilyAndClark]

Your welcome Shawn. I hope you will watch some of our other videos and maybe subscribe.

[@skesno309]

Great channel and your channel has really grown. Keep it up

[@bbrrwwnn]

This may be the best video you have ever shared. Thank you!

[@EmilyAndClark]

Thanks Bill, so nice of you to say.

[@michaelcanto6175]

Excellent, Been looking at the Leopard Catamaran, It's got a 12" I Beam running beneath the mast from port to starboard! Great conduit!!!

[@alhaynes7122]

Thanks for sharing your experiences and accumulated knowledge and research! I’m new to yachting and will consider this video as I do some restoration preparing the yacht for its maiden voyage with me at the helm. She’s an old fibreglass yacht with aluminium deck stepped mast and cast iron keel. I’m an electrician and have always been fascinated with lightning. I have been called to several homes that have suffered burn outs and electrical damage from nearby strikes but only one home that had a direct strike to the tv antenna on a mast 8 m above a tiled roof. Tracing the path of the strike was fascinating! The surge jumped from the mounting bolts inside the roof to the aluminium foil insulation then jumped to several places such as a junction box on power circuit then to a power outlet on kitchen wall mounted on ceramic tiles. It blew the tiles off the wall for a 1metre diameter and jumped via the foil insulation in external walls to antcapping on brick piers to ground at nearby earth stake which showed burn marks from the arc drawn! Also follow coax cable from antenna down to the loop just below the metal external gutters and absolutely exploded the cable at the bend but appeared ok along the straight path. Blew up tv and tuner box as well. A few days work replacing burnt cables and checking for other damage. I imagine it would be terrifying to experience similar strike on a yacht (or when out on my windsurfer!) so loved your insights. Thanks again Al from Lake Macquarie, NSW Aus.

[@RudiRednoseChannel]

Thank you Clark for your information about lightning! As soon as we buy our new yacht, we will surely adapt your advices. Thnx for the research. All good wishes, a merry christmas and a happy new year. Rudolf, North-Rhine-Westphalia

[@billwang88]

Thank you.

[@SirCharles12357]

Best explanation I've seen/read on lightning at sea. Subscribed!

[@EmilyAndClark]

Thanks Charles. Feel free to share it with your friends, I'd appreciate the new viewers.

[@weinerdog137]

Thanks for the good info.

[@cav3104]

Absolute awesome video

[@EmilyAndClark]

Thanks Cav. Look around the channel, you might find more you like.

[@bigpine]

Great video. Long time charter captain, starting a sailing charter business but definitely green in the sailing world. With clients and family on board I'm certainly concerned about strikes and have been trying to figure out how to minimize danger to those who entrust me with their safety. You have definitely given me direction and I thank you

[@annhysell6064]

Just met a couple last night who suffered a strike and had to replace 90% of their electronics in Lake Erie. Thank goodness their hull was not damaged & they were both safe. I mentioned your channel to them, if they are still at AYC to day, I will definitely suggest watching again. Such great info. Sure appreciate sharing practical, well researched & applied applications. Be well.

[@spider0804]

Thanks for sharing some knowledge.

[@moniquelevesque8756]

I'm very very new to the idea of sailing I thank you for this information

[@carlosazevedo4139]

Thank you so much I was really searching for this kind of information, great video, thanks for sharing

[@EmilyAndClark]

You're welcome Carlos. Tale a look around our channel, I bet you find other videos you like. Subscribe if you do. If you think your friends might find any of it interesting how about sharing links on social media? We'd really appreciate the new viewers.

[@MustadMarine]

Good info, thanks

[@AfricanFlightStar]

Fantastic info thank you!! 👍🏻👍🏻👍🏻🙏🏻

[@ArcticSeaCamel]

Thanks for this! It was kind of information I was really looking for. I will do exactly those things for my boat, conductors for both masts, grounding to the keels and charge dissipator(s) to mast(s). Maybe building a dedicated grounded faraday box for storing essential parts of electric propulsion stuff.

[@jorgemalave6970]

Exelent information Keep living well. 👍

[@Eddie-jr6bs]

Wow; really interesting. Thank you.

[@EmilyAndClark]

You're welcome Eddie

[@JulieWallis1963]

Thoroughly fascinating, new subscriber here. I loved listening to you tell your stories and you have a very nice voice too. I find a lot of KZbinrs shout or repeat “er yeah” or “ummmm so yah” but you were very eloquent and interesting.

[@EmilyAndClark]

Thank you Julie

[@M-Swede]

Very informative. Thank you Clark. ⚡️⛵️

[@EmilyAndClark]

You're welcome

[@thomasbuzzi3234]

GREAT stories. Evoking lots of memories of storms past, fronts crossed and microburst plasters! Yes, lightning has the "right of way."

[@outlaw565]

Yep, those microbursts are brutal.

[@stringandreed]

Just a great video, thank you very much

[@EmilyAndClark]

You're very welcome

[@grahamdittman3067]

Bravo another fantastic video. As a new sailer but experienced mechanic I find your videos extremely informative.

[@EmilyAndClark]

Thanks Graham

[@jetwind72]

Wow, great video, learned a lot, and many thanks!

[@EmilyAndClark]

You're welcome Nick. Thanks for watching.

[@TheNeds]

appreciate this info thx Clark, going to review the setup on my boat closer

[@MedicFlyer]

Clark, Thank you so much for this great info... I have shared it with another sailor who can benefit. Peace

[@vincentbarkley9121]

I really am glad you created this episode. This is very useful information for us. Most people just say there's nothing that you can do about lightning. To me that sounds like giving up. Our boat has a deck stepped mast. The port chainplate is connected to a keel bolt with a cable. The keel is cast iron, huge and not encapsulated except for bottom paint. This is the factory setup from Beneteau. Before we purchased the boat it had been struck and the electronics were a total loss. I'd like to reduce the chance of that happening going forward as we have just replaced the electronics throughout the boat. I've eliminated all the mast wiring except for the steaming light as a hedge against charge entering the electrical system. I'd like to add a surge protector to that circuit. A static dissipater is something we could add. I'd appreciate any comments or thoughts you may have about our setup. Great video.

[@1irlmike]

Great informative video. Thank you very much

[@EmilyAndClark]

Your welcome mike. Hope you enjoy our other videos.

[@Themothershipsailing]

A friend who sails with me and I have been wondering about lightening and this is a great explanation, thank you!

[@gonzosierra1]

Excellent presentation thx

[@EmilyAndClark]

You're welcome. Hope you enjoy the rest of our channel

[@kevsworld69]

Excellent job explaining lighting!❤ Thank you so much. So very good to hear confirmations. Much better than barstool recommendations.😂

[@pl7868]

Thx for this video !!!

[@EmilyAndClark]

You're very welcome

[@r.a.monigold9789]

Thank you for sharing!

[@EmilyAndClark]

Your welcome. If you think you're friends might also like it how about sharing this on social media?

[@timvukman4734]

Thank you. That video was like a public service message. You explained it well in clear and in simple terms. It answered a lot of questions for me, and now I have some work to do. No problem, I don't mind work. It's good to have a path that can really make a difference.

[@EmilyAndClark]

You're welcome Tim. Hope you enjoy our other videos.

[@aquaticthumb5193]

It makes so much sense to dissipate the voltage potential.

[@AB1Vampire]

Great story telling! You're a modern old salt. Thanks for posting.

[@MooMan1374]

Well done. Thank you.

[@EmilyAndClark]

You're very welcome Joel

[@SailingSVRose]

Fantastic video. We have been in a few nasty lightning storms yet fortunate to never get hit. The sea can be a choppy one even a day later from the strong winds. Safe journeys!

[@StephenWalkerAhoy-Boats]

Brilliant video. Thank you so much for that sound advice.

[@EmilyAndClark]

You're welcome Stephen

[@coldnorthadventures5905]

Thank you for the info it was very interesting.

[@EmilyAndClark]

You're welcome

[@julianbatcheler9970]

I have watched this so many times. Thank you for making it and all your invaluable content. I have a sizable old British Army ammo case… all made from very solid steel. It currently houses my vintage mobile phone collection. When I get my next boat I aim to find a spot for it, and ground it (as you explained the oven needs to be). I will get into the habit of keeping all electronic kit not in use in it… come a storm I will but all electronics in there and shut the lid.

[@EmilyAndClark]

Good plan

[@jcoghill2]

This video is a treasure vault of good info, I learned a lot. I always suspected proper grounding was the answer and with so few boats out there properly grounded I can see that " Houston we have a problem." Then when you consider the position of the knuckleheads at the marina regarding ion dissipators it's a wonder more boats aren't hit and sunk and/or burnt to the waterline. You have a really long aluminum pole sticking out of the water and into a cloud. You have no reason to be surprised over what happens next.

[@gefginn3699]

Thanks so much for this post

[@EmilyAndClark]

You're welcome.

[@PierceAlexanderLilholt]

I just spent 20 minutes learning about lighting, and I don't know what I learned... I feel like I learned some good things though! Thanks! ⛵

[@MonkPetite]

Nice explanation. Nice advice.. well done. Perfect stament to check the bonding of your boat. Discharge of acces static energy is the key of success. The ion broom thing is ( false hope ) for me . You may as well wetten the mast because that does a better job dissipating static build up. I don’t like attraction rods of any kind on any vehicle. your analysis about how the static electricity is build and if is negative or possible is not correct but it does give picture how it comes up to you. One key is dissipating static discharge. One is move the boat . Don’t sit at steal cable or anchor chain. If so have nylon line in between. Bonding check ref to aviation technology.. you need a megger tester. I’m never go hit by any lighting. And i do sail for 40 years.

[@lutzweb]

immensly thank u finally a sailor with real life experience on the subject god bless u man and fair wind

[@EmilyAndClark]

Thanks Luigi. Hope you subscribe and watch our back videos. Just about to film a similar video except this time it's not lightning it's sharks.

[@AntonPoshy]

Great video thank you. Also, you always attract what you're afraid of.

[@brucewilson2728]

Thank you for sharing your lightning experience and expertise. I enjoyed your U Tube video very much.

[@EmilyAndClark]

Thank you Bruce

[@stevenwolfe2279]

Thanks for the info. I’ve always had questions about lightning as it relates to a fibreglass boat. I think this is the first video that I’ve seen which addresses this question! I fly for the airlines. There are very rare occasions when we will be flying in ice crystals at high altitudes that develop enough of a charge to create St.Elmos fire on the windshields. It looks really cool, and it behaves like the plasma you see in a glass plasma ball that you may find at a specialty store or a science demonstration. The plasma will be attracted to your finger if you touch the glass. It’s faint, so I’ve only seen this at night. Usually it happens in the vicinity of thunderstorms. Unfortunately, I don’t have a camera that is good enough in low light conditions to capture this. Similar to your boat, airliners have static (dispersal) wicks that are located on the trailing edges of the tail and wings. These are also intended to equalize the charge.

[@Afib95]

As a person who’s been hit by lightning three times, I’m very cognizant of his power. But I remember sailing with a friend of mine on a 42 foot Morgan sailboat in the Bahamas near marsh Harbour and when the storms would come through he would assure me that the boat was well grounded to the water and right or wrong that made me feel better.