Lightweight 2s Analog 75mm RIPPER -

[@apachesmokewoundedsniper]

09-12-2024 Good day Ciotti and all you GG how is everyone doing? 00:02:09 On this stream….. 00:07:04 Evening, Gangly man! I'm working on an HDZ 75mm - RCinpower 1002. 22kKV aren't in stock. Should I go 18kKV or wait? Maybe consider 1102? 00:07:40 What closet is this pilot standing in? 00:10:14 What are some of your fav analog 19mm cams? 00:14:50 I’m switching my Acrobee 75 blv5 to props out do I need to pid tune as well ? 00:20:22 2s 75 Motor recommendation. 00:21:41 Did you see Chris Rosser motor comparison video/charts recently? 00:34:30 Support the Channel here! 00:45:35 Props in or out is a great discussion. 00:47:27 With shooting fireworks, was it hard to tell what was up or down since its so dark with everything else? 00:52:50 With rotor riot only selling the Vision40 on 1s is it possible to switch it to 2s? If so how? 00:53:46 Racers run props out because it's better if you clip a gate. 00:59:34 Going to build a ultra-light 75 2s whoop. 01:04:55 Teddy time 01:06:53 It was FPVSkittles that started "team props out" when he was sponsored and testing for BetaFPV when the 75x came out (2s 75mm) and going props out made it fly better at the time. 01:10:00 I just built a 2g4 with 40000kv and I’m having trouble, when off throttle (free fall) I can still hear the motor’s spinning, any suggestions? 01:11:29 Noticeable difference between RCinpower 1002 and 1003? @notice is wondering... not sure if KV same. 01:12:15 I have a 2g4 that used to work fine but I recently tried to fly it and the vtx can't lock with my speedy bee vrx on my HDZero goggles. It "slides' sideways, never locks. Other vtx's r fine. 01:13:30 Have you seen the Nimble65 from Sub250? Any interest in it? Will you get one? 01:15:57 I also switched they acro bee 75 blv5 to the v3 mob 7 frame saved 4 ish grams. 01:16:34 Now we need a long term durability test for 0702 / 0702se motors. 01:25:21 When you have the idle speed too low on a drone what effects does it have on it when flying and flipping doing freestyle. 01:26:27 Please try the 1.5mm 40mm HQ biblade on this rig you're building. 01:29:38 I kept breaking the plastic posts on the underside of the frame between the battery and the Aio. Any ideas on how to prevent it? That’s actually my build. 01:32:40 Use the free software, do you know if the paid software fixes you issues? 01:35:35 Could that 2s 75 work as a tiny lifter? 01:41:43 Solder question. Which is better? place a bit of solder on the tip before soldering with flux or just flux it a have a hot iron no extra solder. 01:44:43 I didn’t was able to bent a shaft on BetaFPV 0702 or 0702se, instead the bell is bent. 01:47:07 Missing out of a big gig. 01:47:53 Any good recommendations for a decent RP-SMA antenna for my Betafpv VR03 with one port? Stock antenna is definitely not the best. 01:48:51 So all the solder talk..... what brand of solder do you use? 01:49:15 Sorry, so many questions this stream. What's the best 4s battery charger that can do storage charge? 01:50:09 Let’s fly the Air Champion. 01:55:28 Stevie Wonder mode….. 02:09:31 I thought the last hole on the BetaFPV canopy is 25 degrees? Do you drill a little hole and modify it for 15 degrees? 02:11:03 Thoughts on Flywoo 1002 23500kv now that you did those tests? Too heavy for 1s and too much overkill for 2s right? Stay safe everyone and have fun flying.

[@MikleRe]

02:12:46 Thus I did it. Can't wait. I got some money back from assurance that was not expected and couldn't contain myself ahah. I'll make some hopefully nice video with it! Thank you for all the datas you provide us with!

[@larrysteinke1839]

i got that air65 champion as my second whoop and it's wild one! i had to put a throttle limit on it for flying indoors.

[@scole901]

59:52 parts for this build

[@le_tranq]

One positive of the 1102betafpv is that you can also use it in an 80mm sized cinewhoop type build if you wanted (like a pavopico etc). Maybe a consideration if you want to keep it simple with spares etc.

[@CiottiFPV]

@@le_tranq gooooooood call

[@Badger_FPV]

Props out to keep the camera clean and clean the grass out my stack 😂

[@Rgrwob]

For those googling props in or out get to Oscar Liang's article. Similar observations different conclusion if I am not mistaking. I did enjoy it being discussed here.

[@le_tranq]

I also think there's a lot of sample variance going on with these testing results, the 36K consistently performed lower than you'd expect and for the moon travellers to make more thrust when they are essentially the same motor made by the same people makes zero sense really. There's a few other notable inconsistencies in this testing. Overall it still supports your testing though which is great.

[@samsamFPV]

Hey Ciotti, unfortunately i cannot follow your streams due to the jet lag (but a wach them as soon as l can). I hope you can give me feedback on this 1s build (reddit isnt helpful😂😂, as you say): • AUW ~34/35g • X12 AIO • Mobula 8 frame • 1102 18kkV/22kkV • GF 2015 biblade • Running on 450/530mAh Thx for all the things you do for the community🙌👊

[@scole901]

i think if you buy a mobula 8 analog, put it in the v4 frame and maybe 1002 motors you could save some money

[@Gv-in-2-it]

What's the 2025 healthcare fund?

[@CiottiFPV]

I'm getting health insurance for the first time since covid lol

[@davidjarzynka4760]

What size rig did you use to fly fireworks?

[@CiottiFPV]

@@davidjarzynka4760 5” 620 gram freestyle build

[@davidjarzynka4760]

@CiottiFPV how bad do you think a Tiny Whoop would be in the middle of the fireworks? (Im going to be like 100 ft away on new years)